Re: [PATCH] net/macb: bindings doc: Merge cdns-emac to macb

[Nicolas Ferre <nicolas.ferre@atmel.com>]

Le 30/11/2015 14:51, Michal Simek a écrit :
> Merge two bindings for the same driver to together.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> 
>  Documentation/devicetree/bindings/net/cdns-emac.txt | 20 --------------------
>  Documentation/devicetree/bindings/net/macb.txt      |  3 +++
>  2 files changed, 3 insertions(+), 20 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/cdns-emac.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt
> deleted file mode 100644
> index 4451ee973223..000000000000
> --- a/Documentation/devicetree/bindings/net/cdns-emac.txt
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -* Cadence EMAC Ethernet controller
> -
> -Required properties:
> -- compatible: Should be "cdns,[<chip>-]{emac}"
> -  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
> -  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
> -  Or the generic form: "cdns,emac".
> -- reg: Address and length of the register set for the device
> -- interrupts: Should contain macb interrupt
> -- phy-mode: see ethernet.txt file in the same directory.
> -
> -Examples:
> -
> -	macb0: ethernet@fffc4000 {
> -		compatible = "cdns,at91rm9200-emac";
> -		reg = <0xfffc4000 0x4000>;
> -		interrupts = <21>;
> -		phy-mode = "rmii";
> -		local-mac-address = [3a 0e 03 04 05 06];
> -	};
> diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
> index b5d79761ac97..1361a6daf63f 100644
> --- a/Documentation/devicetree/bindings/net/macb.txt
> +++ b/Documentation/devicetree/bindings/net/macb.txt
> @@ -2,6 +2,7 @@
>  
>  Required properties:
>  - compatible: Should be "cdns,[<chip>-]{macb|gem}"
> +  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
>    Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
>    available on sama5d3 SoCs.
>    Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
> @@ -10,7 +11,9 @@ Required properties:
>    Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
>    Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
>    Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
> +  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
>    Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
> +  Or the generic form: "cdns,emac".
>  - reg: Address and length of the register set for the device
>  - interrupts: Should contain macb interrupt
>  - phy-mode: See ethernet.txt file in the same directory.
> 


-- 
Nicolas Ferre