* [PATCH v4 0/3]ASoC: cygnus: Add audio support for Broadcom Cygnus SoC @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel Hi, This patchset contains audio support for Broadcom's Cygnus SoC. It contains DT bindings and core audio driver. The audio driver supports both capture and playback of Audio PCM samples over I2S/TDM interface and provides playback support over SPDIF interface. This patchset is derived from a previously submitted patchset: http://lkml.iu.edu/hypermail/linux/kernel/1503.3/05434.html This patchset has been tested on Cygnus wireless audio bcm958305K board. It is based on v4.3-rc5 and is available from github: repo: https://github.com/Broadcom/cygnus-linux/tree/cygnus-sound-v4 Changes from v3: - Fix the subject lines to match the style for the subsystem Simran Rai (3): ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio ASoC: cygnus: Add Cygnus audio DAI driver ASoC: cygnus: Add Cygnus audio DMA driver .../bindings/sound/brcm,cygnus-audio.txt | 54 + sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 +++++++++++ sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++ 6 files changed, 2564 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt create mode 100644 sound/soc/bcm/cygnus-pcm.c create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h -- 1.7.9.5 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 0/3]ASoC: cygnus: Add audio support for Broadcom Cygnus SoC @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel Hi, This patchset contains audio support for Broadcom's Cygnus SoC. It contains DT bindings and core audio driver. The audio driver supports both capture and playback of Audio PCM samples over I2S/TDM interface and provides playback support over SPDIF interface. This patchset is derived from a previously submitted patchset: http://lkml.iu.edu/hypermail/linux/kernel/1503.3/05434.html This patchset has been tested on Cygnus wireless audio bcm958305K board. It is based on v4.3-rc5 and is available from github: repo: https://github.com/Broadcom/cygnus-linux/tree/cygnus-sound-v4 Changes from v3: - Fix the subject lines to match the style for the subsystem Simran Rai (3): ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio ASoC: cygnus: Add Cygnus audio DAI driver ASoC: cygnus: Add Cygnus audio DMA driver .../bindings/sound/brcm,cygnus-audio.txt | 54 + sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 +++++++++++ sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++ 6 files changed, 2564 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt create mode 100644 sound/soc/bcm/cygnus-pcm.c create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h -- 1.7.9.5 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 0/3]ASoC: cygnus: Add audio support for Broadcom Cygnus SoC @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: linux-arm-kernel Hi, This patchset contains audio support for Broadcom's Cygnus SoC. It contains DT bindings and core audio driver. The audio driver supports both capture and playback of Audio PCM samples over I2S/TDM interface and provides playback support over SPDIF interface. This patchset is derived from a previously submitted patchset: http://lkml.iu.edu/hypermail/linux/kernel/1503.3/05434.html This patchset has been tested on Cygnus wireless audio bcm958305K board. It is based on v4.3-rc5 and is available from github: repo: https://github.com/Broadcom/cygnus-linux/tree/cygnus-sound-v4 Changes from v3: - Fix the subject lines to match the style for the subsystem Simran Rai (3): ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio ASoC: cygnus: Add Cygnus audio DAI driver ASoC: cygnus: Add Cygnus audio DMA driver .../bindings/sound/brcm,cygnus-audio.txt | 54 + sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 +++++++++++ sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++ 6 files changed, 2564 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt create mode 100644 sound/soc/bcm/cygnus-pcm.c create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h -- 1.7.9.5 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 1/3] ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio 2015-11-10 0:17 ` Simran Rai (?) @ 2015-11-10 0:17 ` Simran Rai -1 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel Add bindings for audio driver in Broadcom Cygnus. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> --- .../bindings/sound/brcm,cygnus-audio.txt | 54 ++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 0000000..3c06001 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,54 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller + +Required properties: + - compatible : "brcm,cygnus-audio" + - #address-cells: 32bit valued, 1 cell. + - #size-cells: 32bit valued, 0 cell. + - reg : Should contain audio registers location and length + - reg-names: names of the registers listed in "reg" property + Valid names are "aud" and "i2s_in". "aud" contains a + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains + a set of I2S_IN registers. + - clocks: PLL and leaf clocks used by audio ports + - clock-names: names of 3 leaf clocks used by audio ports + Valid names are "ch0_audio", "ch1_audio", "ch2_audio" + - interrupts: audio DMA interrupt number + +SSP Subnode properties: +- reg: The index of ssp port interface to use + Valid value are 0, 1, 2, or 3 (for spdif) + + +Example: + cygnus_audio: audio@180ae000 { + compatible = "brcm,cygnus-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; + reg-names = "aud", "i2s_in"; + clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + + ssp0: ssp_port@0 { + reg = <0>; + status = "okay"; + }; + + ssp1: ssp_port@1 { + reg = <1>; + status = "disabled"; + }; + + ssp2: ssp_port@2 { + reg = <2>; + status = "disabled"; + }; + + spdif: spdif_port@3 { + reg = <3>; + status = "disabled"; + }; + }; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 1/3] ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel Add bindings for audio driver in Broadcom Cygnus. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> --- .../bindings/sound/brcm,cygnus-audio.txt | 54 ++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 0000000..3c06001 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,54 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller + +Required properties: + - compatible : "brcm,cygnus-audio" + - #address-cells: 32bit valued, 1 cell. + - #size-cells: 32bit valued, 0 cell. + - reg : Should contain audio registers location and length + - reg-names: names of the registers listed in "reg" property + Valid names are "aud" and "i2s_in". "aud" contains a + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains + a set of I2S_IN registers. + - clocks: PLL and leaf clocks used by audio ports + - clock-names: names of 3 leaf clocks used by audio ports + Valid names are "ch0_audio", "ch1_audio", "ch2_audio" + - interrupts: audio DMA interrupt number + +SSP Subnode properties: +- reg: The index of ssp port interface to use + Valid value are 0, 1, 2, or 3 (for spdif) + + +Example: + cygnus_audio: audio@180ae000 { + compatible = "brcm,cygnus-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; + reg-names = "aud", "i2s_in"; + clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + + ssp0: ssp_port@0 { + reg = <0>; + status = "okay"; + }; + + ssp1: ssp_port@1 { + reg = <1>; + status = "disabled"; + }; + + ssp2: ssp_port@2 { + reg = <2>; + status = "disabled"; + }; + + spdif: spdif_port@3 { + reg = <3>; + status = "disabled"; + }; + }; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 1/3] ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: linux-arm-kernel Add bindings for audio driver in Broadcom Cygnus. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> --- .../bindings/sound/brcm,cygnus-audio.txt | 54 ++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 0000000..3c06001 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,54 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller + +Required properties: + - compatible : "brcm,cygnus-audio" + - #address-cells: 32bit valued, 1 cell. + - #size-cells: 32bit valued, 0 cell. + - reg : Should contain audio registers location and length + - reg-names: names of the registers listed in "reg" property + Valid names are "aud" and "i2s_in". "aud" contains a + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains + a set of I2S_IN registers. + - clocks: PLL and leaf clocks used by audio ports + - clock-names: names of 3 leaf clocks used by audio ports + Valid names are "ch0_audio", "ch1_audio", "ch2_audio" + - interrupts: audio DMA interrupt number + +SSP Subnode properties: +- reg: The index of ssp port interface to use + Valid value are 0, 1, 2, or 3 (for spdif) + + +Example: + cygnus_audio: audio at 180ae000 { + compatible = "brcm,cygnus-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; + reg-names = "aud", "i2s_in"; + clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + + ssp0: ssp_port at 0 { + reg = <0>; + status = "okay"; + }; + + ssp1: ssp_port at 1 { + reg = <1>; + status = "disabled"; + }; + + ssp2: ssp_port at 2 { + reg = <2>; + status = "disabled"; + }; + + spdif: spdif_port at 3 { + reg = <3>; + status = "disabled"; + }; + }; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver 2015-11-10 0:17 ` Simran Rai (?) @ 2015-11-10 0:17 ` Simran Rai -1 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel This patch adds Cygnus audio DAI driver. It supports I2S, TDM and SPDIF modes and uses three clocks derived from PLL. This patchset has been tested on Cygnus wireless audio bcm958305K board. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <arunp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++++ 2 files changed, 1637 insertions(+) create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h diff --git a/sound/soc/bcm/cygnus-ssp.c b/sound/soc/bcm/cygnus-ssp.c new file mode 100644 index 0000000..f9f321b --- /dev/null +++ b/sound/soc/bcm/cygnus-ssp.c @@ -0,0 +1,1508 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "cygnus-ssp.h" + +#define DEFAULT_VCO 1354750204 + +#define CYGNUS_TDM_RATE \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define CAPTURE_FCI_ID_BASE 0x180 +#define CYGNUS_SSP_TRISTATE_MASK 0x001fff + +/* Used with stream_on field to indicate which streams are active */ +#define PLAYBACK_STREAM_MASK BIT(0) +#define CAPTURE_STREAM_MASK BIT(1) + +#define I2S_STREAM_CFG_MASK 0xff003ff +#define I2S_CAP_STREAM_CFG_MASK 0xf0 +#define SPDIF_STREAM_CFG_MASK 0x3ff +#define CH_GRP_STEREO 0x1 + +/* Begin register offset defines */ +#define AUD_MISC_SEROUT_OE_REG_BASE 0x01c +#define AUD_MISC_SEROUT_SPDIF_OE 13 +#define AUD_MISC_SEROUT_MCLK_OE 3 +#define AUD_MISC_SEROUT_LRCK_OE 2 +#define AUD_MISC_SEROUT_SCLK_OE 1 +#define AUD_MISC_SEROUT_SDAT_OE 0 + +/* AUD_FMM_BF_CTRL_xxx regs */ +#define BF_DST_CFG0_OFFSET 0x100 +#define BF_DST_CFG1_OFFSET 0x104 +#define BF_DST_CFG2_OFFSET 0x108 + +#define BF_DST_CTRL0_OFFSET 0x130 +#define BF_DST_CTRL1_OFFSET 0x134 +#define BF_DST_CTRL2_OFFSET 0x138 + +#define BF_SRC_CFG0_OFFSET 0x148 +#define BF_SRC_CFG1_OFFSET 0x14c +#define BF_SRC_CFG2_OFFSET 0x150 +#define BF_SRC_CFG3_OFFSET 0x154 + +#define BF_SRC_CTRL0_OFFSET 0x1c0 +#define BF_SRC_CTRL1_OFFSET 0x1c4 +#define BF_SRC_CTRL2_OFFSET 0x1c8 +#define BF_SRC_CTRL3_OFFSET 0x1cc + +#define BF_SRC_GRP0_OFFSET 0x1fc +#define BF_SRC_GRP1_OFFSET 0x200 +#define BF_SRC_GRP2_OFFSET 0x204 +#define BF_SRC_GRP3_OFFSET 0x208 + +#define BF_SRC_GRP_EN_OFFSET 0x320 +#define BF_SRC_GRP_FLOWON_OFFSET 0x324 +#define BF_SRC_GRP_SYNC_DIS_OFFSET 0x328 + +/* AUD_FMM_IOP_OUT_I2S_xxx regs */ +#define OUT_I2S_0_STREAM_CFG_OFFSET 0xa00 +#define OUT_I2S_0_CFG_OFFSET 0xa04 +#define OUT_I2S_0_MCLK_CFG_OFFSET 0xa0c + +#define OUT_I2S_1_STREAM_CFG_OFFSET 0xa40 +#define OUT_I2S_1_CFG_OFFSET 0xa44 +#define OUT_I2S_1_MCLK_CFG_OFFSET 0xa4c + +#define OUT_I2S_2_STREAM_CFG_OFFSET 0xa80 +#define OUT_I2S_2_CFG_OFFSET 0xa84 +#define OUT_I2S_2_MCLK_CFG_OFFSET 0xa8c + +/* AUD_FMM_IOP_OUT_SPDIF_xxx regs */ +#define SPDIF_STREAM_CFG_OFFSET 0xac0 +#define SPDIF_CTRL_OFFSET 0xac4 +#define SPDIF_FORMAT_CFG_OFFSET 0xad8 +#define SPDIF_MCLK_CFG_OFFSET 0xadc + +/* AUD_FMM_IOP_PLL_0_xxx regs */ +#define IOP_PLL_0_MACRO_OFFSET 0xb00 +#define IOP_PLL_0_MDIV_Ch0_OFFSET 0xb14 +#define IOP_PLL_0_MDIV_Ch1_OFFSET 0xb18 +#define IOP_PLL_0_MDIV_Ch2_OFFSET 0xb1c + +#define IOP_PLL_0_ACTIVE_MDIV_Ch0_OFFSET 0xb30 +#define IOP_PLL_0_ACTIVE_MDIV_Ch1_OFFSET 0xb34 +#define IOP_PLL_0_ACTIVE_MDIV_Ch2_OFFSET 0xb38 + +/* AUD_FMM_IOP_xxx regs */ +#define IOP_PLL_0_CONTROL_OFFSET 0xb04 +#define IOP_PLL_0_USER_NDIV_OFFSET 0xb08 +#define IOP_PLL_0_ACTIVE_NDIV_OFFSET 0xb20 +#define IOP_PLL_0_RESET_OFFSET 0xb5c + +/* AUD_FMM_IOP_IN_I2S_xxx regs */ +#define IN_I2S_0_STREAM_CFG_OFFSET 0x00 +#define IN_I2S_0_CFG_OFFSET 0x04 +#define IN_I2S_1_STREAM_CFG_OFFSET 0x40 +#define IN_I2S_1_CFG_OFFSET 0x44 +#define IN_I2S_2_STREAM_CFG_OFFSET 0x80 +#define IN_I2S_2_CFG_OFFSET 0x84 + +/* AUD_FMM_IOP_MISC_xxx regs */ +#define IOP_SW_INIT_LOGIC 0x1c0 + +/* End register offset defines */ + + +/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_0_REG */ +#define I2S_OUT_MCLKRATE_SHIFT 16 + +/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_REG */ +#define I2S_OUT_PLLCLKSEL_SHIFT 0 + +/* AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG */ +#define I2S_OUT_STREAM_ENA 31 +#define I2S_OUT_STREAM_CFG_GROUP_ID 20 +#define I2S_OUT_STREAM_CFG_CHANNEL_GROUPING 24 + +/* AUD_FMM_IOP_IN_I2S_x_CAP */ +#define I2S_IN_STREAM_CFG_CAP_ENA 31 +#define I2S_IN_STREAM_CFG_0_GROUP_ID 4 + +/* AUD_FMM_IOP_OUT_I2S_x_I2S_CFG_REG */ +#define I2S_OUT_CFGX_CLK_ENA 0 +#define I2S_OUT_CFGX_DATA_ENABLE 1 +#define I2S_OUT_CFGX_DATA_ALIGNMENT 6 +#define I2S_OUT_CFGX_BITS_PER_SLOT 13 +#define I2S_OUT_CFGX_VALID_SLOT 14 +#define I2S_OUT_CFGX_FSYNC_WIDTH 18 +#define I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32 26 +#define I2S_OUT_CFGX_SLAVE_MODE 30 +#define I2S_OUT_CFGX_TDM_MODE 31 + +/* AUD_FMM_BF_CTRL_SOURCECH_CFGx_REG */ +#define BF_SRC_CFGX_SFIFO_ENA 0 +#define BF_SRC_CFGX_BUFFER_PAIR_ENABLE 1 +#define BF_SRC_CFGX_SAMPLE_CH_MODE 2 +#define BF_SRC_CFGX_SFIFO_SZ_DOUBLE 5 +#define BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY 10 +#define BF_SRC_CFGX_BIT_RES 20 +#define BF_SRC_CFGX_PROCESS_SEQ_ID_VALID 31 + +/* AUD_FMM_BF_CTRL_DESTCH_CFGx_REG */ +#define BF_DST_CFGX_CAP_ENA 0 +#define BF_DST_CFGX_BUFFER_PAIR_ENABLE 1 +#define BF_DST_CFGX_DFIFO_SZ_DOUBLE 2 +#define BF_DST_CFGX_NOT_PAUSE_WHEN_FULL 11 +#define BF_DST_CFGX_FCI_ID 12 +#define BF_DST_CFGX_CAP_MODE 24 +#define BF_DST_CFGX_PROC_SEQ_ID_VALID 31 + +/* AUD_FMM_IOP_OUT_SPDIF_xxx */ +#define SPDIF_0_OUT_DITHER_ENA 3 +#define SPDIF_0_OUT_STREAM_ENA 31 + +/* AUD_FMM_IOP_PLL_0_USER */ +#define IOP_PLL_0_USER_NDIV_FRAC 10 + +/* AUD_FMM_IOP_PLL_0_ACTIVE */ +#define IOP_PLL_0_ACTIVE_NDIV_FRAC 10 + + +#define INIT_SSP_REGS(num) (struct cygnus_ssp_regs){ \ + .i2s_stream_cfg = OUT_I2S_ ##num## _STREAM_CFG_OFFSET, \ + .i2s_cap_stream_cfg = IN_I2S_ ##num## _STREAM_CFG_OFFSET, \ + .i2s_cfg = OUT_I2S_ ##num## _CFG_OFFSET, \ + .i2s_cap_cfg = IN_I2S_ ##num## _CFG_OFFSET, \ + .i2s_mclk_cfg = OUT_I2S_ ##num## _MCLK_CFG_OFFSET, \ + .bf_destch_ctrl = BF_DST_CTRL ##num## _OFFSET, \ + .bf_destch_cfg = BF_DST_CFG ##num## _OFFSET, \ + .bf_sourcech_ctrl = BF_SRC_CTRL ##num## _OFFSET, \ + .bf_sourcech_cfg = BF_SRC_CFG ##num## _OFFSET, \ + .bf_sourcech_grp = BF_SRC_GRP ##num## _OFFSET \ +} + +struct pll_macro_entry { + u32 mclk; + u32 pll_ch_num; + unsigned long vco_rate; +}; + +/* + * PLL has 3 output channels (1x, 2x, and 4x). Below are + * the common MCLK frequencies used by audio driver + */ +static const struct pll_macro_entry pll_predef_mclk[] = { + { 4096000, 0, 1769470191UL}, + { 8192000, 1, 1769470191UL}, + {16384000, 2, 1769470191UL}, + + { 5644800, 0, 1354750204UL}, + {11289600, 1, 1354750204UL}, + {22579200, 2, 1354750204UL}, + + { 6144000, 0, 1769470191UL}, + {12288000, 1, 1769470191UL}, + {24576000, 2, 1769470191UL}, + + {12288000, 0, 1769470191UL}, + {24576000, 1, 1769470191UL}, + {49152000, 2, 1769470191UL}, + + {22579200, 0, 1354750204UL}, + {45158400, 1, 1354750204UL}, + {90316800, 2, 1354750204UL}, + + {24576000, 0, 1769470191UL}, + {49152000, 1, 1769470191UL}, + {98304000, 2, 1769470191UL}, +}; + +/* List of valid frame sizes for tdm mode */ +static const int ssp_valid_tdm_framesize[] = {32, 64, 128, 256, 512}; + +/* + * Use this relationship to derive the sampling rate (lrclk) + * lrclk = (mclk) / ((2*mclk_to_sclk_ratio) * (32 * SCLK))). + * + * Use mclk and pll_ch from the table above + * + * Valid SCLK = 0/1/2/4/8/12 + * + * mclk_to_sclk_ratio = number of MCLK per SCLK. Division is twice the + * value programmed in this field. + * Valid mclk_to_sclk_ratio = 1 through to 15 + * + * eg: To set lrclk = 48khz, set mclk = 12288000, mclk_to_sclk_ratio = 2, + * SCLK = 64 + */ +struct _ssp_clk_coeff { + u32 mclk; + u32 sclk_rate; + u32 rate; + u32 mclk_rate; +}; + +static const struct _ssp_clk_coeff ssp_clk_coeff[] = { + { 4096000, 32, 16000, 4}, + { 4096000, 32, 32000, 2}, + { 4096000, 64, 8000, 4}, + { 4096000, 64, 16000, 2}, + { 4096000, 64, 32000, 1}, + { 4096000, 128, 8000, 2}, + { 4096000, 128, 16000, 1}, + { 4096000, 256, 8000, 1}, + + { 6144000, 32, 16000, 6}, + { 6144000, 32, 32000, 3}, + { 6144000, 32, 48000, 2}, + { 6144000, 32, 96000, 1}, + { 6144000, 64, 8000, 6}, + { 6144000, 64, 16000, 3}, + { 6144000, 64, 48000, 1}, + { 6144000, 128, 8000, 3}, + + { 8192000, 32, 32000, 4}, + { 8192000, 64, 16000, 4}, + { 8192000, 64, 32000, 2}, + { 8192000, 128, 8000, 4}, + { 8192000, 128, 16000, 2}, + { 8192000, 128, 32000, 1}, + { 8192000, 256, 8000, 2}, + { 8192000, 256, 16000, 1}, + { 8192000, 512, 8000, 1}, + + {12288000, 32, 32000, 6}, + {12288000, 32, 48000, 4}, + {12288000, 32, 96000, 2}, + {12288000, 32, 192000, 1}, + {12288000, 64, 16000, 6}, + {12288000, 64, 32000, 3}, + {12288000, 64, 48000, 2}, + {12288000, 64, 96000, 1}, + {12288000, 128, 8000, 6}, + {12288000, 128, 16000, 3}, + {12288000, 128, 48000, 1}, + {12288000, 256, 8000, 3}, + + {16384000, 64, 32000, 4}, + {16384000, 128, 16000, 4}, + {16384000, 128, 32000, 2}, + {16384000, 256, 8000, 4}, + {16384000, 256, 16000, 2}, + {16384000, 256, 32000, 1}, + {16384000, 512, 8000, 2}, + {16384000, 512, 16000, 1}, + + {24576000, 32, 96000, 4}, + {24576000, 32, 192000, 2}, + {24576000, 64, 32000, 6}, + {24576000, 64, 48000, 4}, + {24576000, 64, 96000, 2}, + {24576000, 64, 192000, 1}, + {24576000, 128, 16000, 6}, + {24576000, 128, 32000, 3}, + {24576000, 128, 48000, 2}, + {24576000, 256, 8000, 6}, + {24576000, 256, 16000, 3}, + {24576000, 256, 48000, 1}, + {24576000, 512, 8000, 3}, + + {49152000, 32, 192000, 4}, + {49152000, 64, 96000, 4}, + {49152000, 64, 192000, 2}, + {49152000, 128, 32000, 6}, + {49152000, 128, 48000, 4}, + {49152000, 128, 96000, 2}, + {49152000, 128, 192000, 1}, + {49152000, 256, 16000, 6}, + {49152000, 256, 32000, 3}, + {49152000, 256, 48000, 2}, + {49152000, 256, 96000, 1}, + {49152000, 512, 8000, 6}, + {49152000, 512, 16000, 3}, + {49152000, 512, 48000, 1}, + + { 5644800, 32, 22050, 4}, + { 5644800, 32, 44100, 2}, + { 5644800, 32, 88200, 1}, + { 5644800, 64, 11025, 4}, + { 5644800, 64, 22050, 2}, + { 5644800, 64, 44100, 1}, + + {11289600, 32, 44100, 4}, + {11289600, 32, 88200, 2}, + {11289600, 32, 176400, 1}, + {11289600, 64, 22050, 4}, + {11289600, 64, 44100, 2}, + {11289600, 64, 88200, 1}, + {11289600, 128, 11025, 4}, + {11289600, 128, 22050, 2}, + {11289600, 128, 44100, 1}, + + {22579200, 32, 88200, 4}, + {22579200, 32, 176400, 2}, + {22579200, 64, 44100, 4}, + {22579200, 64, 88200, 2}, + {22579200, 64, 176400, 1}, + {22579200, 128, 22050, 4}, + {22579200, 128, 44100, 2}, + {22579200, 128, 88200, 1}, + {22579200, 256, 11025, 4}, + {22579200, 256, 22050, 2}, + {22579200, 256, 44100, 1}, + + {45158400, 32, 176400, 4}, + {45158400, 64, 88200, 4}, + {45158400, 64, 176400, 2}, + {45158400, 128, 44100, 4}, + {45158400, 128, 88200, 2}, + {45158400, 128, 176400, 1}, + {45158400, 256, 22050, 4}, + {45158400, 256, 44100, 2}, + {45158400, 256, 88200, 1}, + {45158400, 512, 11025, 4}, + {45158400, 512, 22050, 2}, + {45158400, 512, 44100, 1}, +}; + +static struct cygnus_aio_port *cygnus_dai_get_portinfo(struct snd_soc_dai *dai) +{ + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + return &cygaud->portinfo[dai->id]; +} + +static int audio_ssp_init_portregs(struct cygnus_aio_port *aio) +{ + u32 value, fci_id; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value &= ~I2S_STREAM_CFG_MASK; + + /* Set Group ID */ + writel(aio->portnum, aio->cygaud->audio + + aio->regs.bf_sourcech_grp); + + /* Configure the AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG reg */ + value |= aio->portnum << I2S_OUT_STREAM_CFG_GROUP_ID; + value |= aio->portnum; /* FCI ID is the port num */ + value |= CH_GRP_STEREO << I2S_OUT_STREAM_CFG_CHANNEL_GROUPING; + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + /* Configure the AUD_FMM_BF_CTRL_SOURCECH_CFGX reg */ + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY); + value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE); + value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* Configure the AUD_FMM_IOP_IN_I2S_x_CAP_STREAM_CFG_0 reg */ + value = readl(aio->cygaud->i2s_in + + aio->regs.i2s_cap_stream_cfg); + value &= ~I2S_CAP_STREAM_CFG_MASK; + value |= aio->portnum << I2S_IN_STREAM_CFG_0_GROUP_ID; + writel(value, aio->cygaud->i2s_in + + aio->regs.i2s_cap_stream_cfg); + + /* Configure the AUD_FMM_BF_CTRL_DESTCH_CFGX_REG_BASE reg */ + fci_id = CAPTURE_FCI_ID_BASE + aio->portnum; + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_DFIFO_SZ_DOUBLE); + value &= ~BIT(BF_DST_CFGX_NOT_PAUSE_WHEN_FULL); + value |= (fci_id << BF_DST_CFGX_FCI_ID); + value |= BIT(BF_DST_CFGX_PROC_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); + + /* Enable the transmit pin for this port */ + value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + value &= ~BIT((aio->portnum * 4) + AUD_MISC_SEROUT_SDAT_OE); + writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + break; + case PORT_SPDIF: + writel(aio->portnum, aio->cygaud->audio + BF_SRC_GRP3_OFFSET); + + value = readl(aio->cygaud->audio + SPDIF_CTRL_OFFSET); + value |= BIT(SPDIF_0_OUT_DITHER_ENA); + writel(value, aio->cygaud->audio + SPDIF_CTRL_OFFSET); + + /* Enable and set the FCI ID for the SPDIF channel */ + value = readl(aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET); + value &= ~SPDIF_STREAM_CFG_MASK; + value |= aio->portnum; /* FCI ID is the port num */ + value |= BIT(SPDIF_0_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY); + value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE); + value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* Enable the spdif output pin */ + value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + value &= ~BIT(AUD_MISC_SEROUT_SPDIF_OE); + writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + break; + default: + dev_err(aio->cygaud->dev, "Port not supported\n"); + status = -EINVAL; + } + + return status; +} + +static void audio_ssp_in_enable(struct cygnus_aio_port *aio) +{ + u32 value; + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_CAP_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); + + writel(0x1, aio->cygaud->audio + aio->regs.bf_destch_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value |= BIT(I2S_OUT_CFGX_CLK_ENA); + value |= BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + value |= BIT(I2S_IN_STREAM_CFG_CAP_ENA); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + + aio->streams_on |= CAPTURE_STREAM_MASK; +} + +static void audio_ssp_in_disable(struct cygnus_aio_port *aio) +{ + u32 value; + + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + value &= ~BIT(I2S_IN_STREAM_CFG_CAP_ENA); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + + aio->streams_on &= ~CAPTURE_STREAM_MASK; + + /* If both playback and capture are off */ + if (!aio->streams_on) { + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~BIT(I2S_OUT_CFGX_CLK_ENA); + value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + } + + writel(0x0, aio->cygaud->audio + aio->regs.bf_destch_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value &= ~BIT(BF_DST_CFGX_CAP_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); +} + +static int audio_ssp_out_enable(struct cygnus_aio_port *aio) +{ + u32 value; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value |= BIT(I2S_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value |= BIT(I2S_OUT_CFGX_CLK_ENA); + value |= BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + aio->streams_on |= PLAYBACK_STREAM_MASK; + break; + case PORT_SPDIF: + value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + value |= 0x3; + writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + + writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + break; + default: + dev_err(aio->cygaud->dev, + "Port not supported %d\n", aio->portnum); + status = -EINVAL; + } + + return status; +} + +static int audio_ssp_out_disable(struct cygnus_aio_port *aio) +{ + u32 value; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + aio->streams_on &= ~PLAYBACK_STREAM_MASK; + + /* If both playback and capture are off */ + if (!aio->streams_on) { + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~BIT(I2S_OUT_CFGX_CLK_ENA); + value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + } + + /* set group_sync_dis = 1 */ + value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + value |= BIT(aio->portnum); + writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + + writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* set group_sync_dis = 0 */ + value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + value &= ~BIT(aio->portnum); + writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value &= ~BIT(I2S_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + /* IOP SW INIT on OUT_I2S_x */ + value = readl(aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + value |= BIT(aio->portnum); + writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + value &= ~BIT(aio->portnum); + writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + break; + case PORT_SPDIF: + value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + value &= ~0x3; + writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + break; + default: + dev_err(aio->cygaud->dev, + "Port not supported %d\n", aio->portnum); + status = -EINVAL; + } + + return status; +} + +static int configure_vco(struct cygnus_audio *cygaud, + unsigned long vco_rate) +{ + struct clk *parent; + int error; + + if (vco_rate == cygaud->vco_rate) + return 0; + + /* Change PLL rate only if none of the ports are active */ + if (!cygaud->active_ports) { + parent = clk_get_parent(cygaud->audio_clk[0]); + if (IS_ERR(parent)) + return PTR_ERR(parent); + + /* Set PLL VCO Frequency (Hz) */ + error = clk_set_rate(parent, vco_rate); + if (error) { + dev_err(cygaud->dev, "%s Set PLL VCO rate failed: %d\n", + __func__, error); + return error; + } + cygaud->vco_rate = vco_rate; + } else { + dev_err(cygaud->dev, "%s Cannot change VCO Freq\n", + __func__); + return -EINVAL; + } + + return 0; +} + +static int pll_configure_mclk(struct cygnus_audio *cygaud, u32 mclk, + struct device *dev) +{ + int i = 0, error; + bool found = false; + const struct pll_macro_entry *p_entry; + struct clk *ch_clk; + unsigned long vco_rate = 0; + + for (i = 0; i < ARRAY_SIZE(pll_predef_mclk); i++) { + p_entry = &pll_predef_mclk[i]; + + if (p_entry->mclk == mclk) { + found = true; + vco_rate = p_entry->vco_rate; + break; + } + } + if (!found) { + dev_err(dev, + "%s No valid mclk freq (%u) found!\n", __func__, mclk); + return -EINVAL; + } + + error = configure_vco(cygaud, vco_rate); + if (error) + return error; + + ch_clk = cygaud->audio_clk[p_entry->pll_ch_num]; + + error = clk_set_rate(ch_clk, mclk); + if (error) { + dev_err(dev, "%s Set MCLK rate failed: %d\n", __func__, error); + return error; + } + return p_entry->pll_ch_num; +} + +static int cygnus_ssp_set_clocks(struct cygnus_aio_port *aio, + struct cygnus_audio *cygaud) +{ + u32 value, i = 0; + u32 mask = 0xf; + u32 sclk; + bool found = false; + const struct _ssp_clk_coeff *p_entry = NULL; + + if ((!aio->lrclk) || (!aio->bit_per_frame)) { + dev_err(aio->cygaud->dev, "First set up port through hw_params()\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(ssp_clk_coeff); i++) { + p_entry = &ssp_clk_coeff[i]; + if ((p_entry->rate == aio->lrclk) && + (p_entry->sclk_rate == aio->bit_per_frame) && + (p_entry->mclk == aio->mclk)) { + found = true; + break; + } + } + if (!found) { + dev_err(aio->cygaud->dev, + "No valid match found in ssp_clk_coeff array\n"); + dev_err(aio->cygaud->dev, "lrclk = %u, bits/frame = %u, mclk = %u\n", + aio->lrclk, aio->bit_per_frame, aio->mclk); + return -EINVAL; + } + + sclk = aio->bit_per_frame; + if (sclk == 512) + sclk = 0; + /* sclks_per_1fs_div = sclk cycles/32 */ + sclk /= 32; + /* Set sclk rate */ + if (aio->port_type == PORT_TDM) { + /* Set number of bitclks per frame */ + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~(mask << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32); + value |= sclk << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32; + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + dev_dbg(aio->cygaud->dev, + "SCLKS_PER_1FS_DIV32 = 0x%x\n", value); + } + + /* Set MCLK_RATE ssp port (spdif and ssp are the same) */ + value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + value &= ~(0xf << I2S_OUT_MCLKRATE_SHIFT); + value |= (p_entry->mclk_rate << I2S_OUT_MCLKRATE_SHIFT); + writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + + dev_dbg(aio->cygaud->dev, "mclk cfg reg = 0x%x\n", value); + dev_dbg(aio->cygaud->dev, "bits per frame = %u, mclk = %u Hz, lrclk = %u Hz\n", + aio->bit_per_frame, aio->mclk, aio->lrclk); + return 0; +} + +static int cygnus_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + int rate, bitres; + u32 value; + u32 mask = 0x1f; + int ret = 0; + + dev_dbg(aio->cygaud->dev, "%s port = %d\n", __func__, aio->portnum); + dev_dbg(aio->cygaud->dev, "params_channels %d\n", + params_channels(params)); + dev_dbg(aio->cygaud->dev, "rate %d\n", params_rate(params)); + dev_dbg(aio->cygaud->dev, "format %d\n", params_format(params)); + + rate = params_rate(params); + + switch (aio->mode) { + case CYGNUS_SSPMODE_TDM: + if ((rate == 192000) && (params_channels(params) > 4)) { + dev_err(aio->cygaud->dev, "Cannot run %d channels at %dHz\n", + params_channels(params), rate); + return -EINVAL; + } + break; + case CYGNUS_SSPMODE_I2S: + aio->bit_per_frame = 64; /* I2S must be 64 bit per frame */ + break; + default: + dev_err(aio->cygaud->dev, + "%s port running in unknown mode\n", __func__); + return -EINVAL; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Configure channels as mono or stereo */ + if (params_channels(params) == 1) { + value = readl(aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SAMPLE_CH_MODE); + value &= ~BIT(BF_SRC_CFGX_BUFFER_PAIR_ENABLE); + writel(value, aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + } else { + value = readl(aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SAMPLE_CH_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + } + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bitres = 8; + break; + + case SNDRV_PCM_FORMAT_S16_LE: + bitres = 16; + break; + + case SNDRV_PCM_FORMAT_S32_LE: + case SNDRV_PCM_FORMAT_S24_LE: + /* 32 bit mode is coded as 0 */ + bitres = 0; + break; + + default: + return -EINVAL; + } + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~(mask << BF_SRC_CFGX_BIT_RES); + value |= (bitres << BF_SRC_CFGX_BIT_RES); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + } else { + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + value = readl(aio->cygaud->audio + + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_CAP_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_destch_cfg); + break; + + case SNDRV_PCM_FORMAT_S32_LE: + case SNDRV_PCM_FORMAT_S24_LE: + value = readl(aio->cygaud->audio + + aio->regs.bf_destch_cfg); + value &= ~BIT(BF_DST_CFGX_CAP_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_destch_cfg); + break; + + default: + return -EINVAL; + } + } + + aio->lrclk = rate; + + if (!aio->is_slave) + ret = cygnus_ssp_set_clocks(aio, cygaud); + + return ret; +} + +/* + * This function sets the mclk frequency for pll clock + */ +static int cygnus_ssp_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + int sel; + u32 value; + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + dev_dbg(aio->cygaud->dev, + "%s Enter port = %d\n", __func__, aio->portnum); + sel = pll_configure_mclk(cygaud, freq, aio->cygaud->dev); + if (sel < 0) { + dev_err(aio->cygaud->dev, + "%s Setting mclk failed.\n", __func__); + return -EINVAL; + } + + aio->mclk = freq; + + dev_dbg(aio->cygaud->dev, "%s Setting MCLKSEL to %d\n", __func__, sel); + value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + value &= ~(0xf << I2S_OUT_PLLCLKSEL_SHIFT); + value |= (sel << I2S_OUT_PLLCLKSEL_SHIFT); + writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + + return 0; +} + +static int cygnus_ssp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + + snd_soc_dai_set_dma_data(dai, substream, aio); + + return 0; +} + +/* + * Bit Update Notes + * 31 Yes TDM Mode (1 = TDM, 0 = i2s) + * 30 Yes Slave Mode (1 = Slave, 0 = Master) + * 29:26 No Sclks per frame + * 25:18 Yes FS Width + * 17:14 No Valid Slots + * 13 No Bits (1 = 16 bits, 0 = 32 bits) + * 12:08 No Bits per samp + * 07 Yes Justifcation (1 = LSB, 0 = MSB) + * 06 Yes Alignment (1 = Delay 1 clk, 0 = no delay + * 05 Yes SCLK polarity (1 = Rising, 0 = Falling) + * 04 Yes LRCLK Polarity (1 = High for left, 0 = Low for left) + * 03:02 Yes Reserved - write as zero + * 01 No Data Enable + * 00 No CLK Enable + */ +#define I2S_OUT_CFG_REG_UPDATE_MASK 0x3C03FF03 + +/* Input cfg is same as output, but the FS width is not a valid field */ +#define I2S_IN_CFG_REG_UPDATE_MASK (I2S_OUT_CFG_REG_UPDATE_MASK | 0x03FC0000) + +int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, int len) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + + if ((len > 0) && (len < 256)) { + aio->fsync_width = len; + return 0; + } else { + return -EINVAL; + } +} + +static int cygnus_ssp_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + u32 ssp_curcfg; + u32 ssp_newcfg; + u32 ssp_outcfg; + u32 ssp_incfg; + u32 val; + u32 mask; + + dev_dbg(aio->cygaud->dev, "%s Enter fmt: %x\n", __func__, fmt); + + if (aio->port_type == PORT_SPDIF) + return -EINVAL; + + ssp_newcfg = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ssp_newcfg |= BIT(I2S_OUT_CFGX_SLAVE_MODE); + aio->is_slave = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + ssp_newcfg &= ~BIT(I2S_OUT_CFGX_SLAVE_MODE); + aio->is_slave = 0; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT); + ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH); + aio->mode = CYGNUS_SSPMODE_I2S; + break; + + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + ssp_newcfg |= BIT(I2S_OUT_CFGX_TDM_MODE); + + /* DSP_A = data after FS, DSP_B = data during FS */ + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_DSP_A) + ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT); + + if ((aio->fsync_width > 0) && (aio->fsync_width < 256)) + ssp_newcfg |= + (aio->fsync_width << I2S_OUT_CFGX_FSYNC_WIDTH); + else + ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH); + + aio->mode = CYGNUS_SSPMODE_TDM; + break; + + default: + return -EINVAL; + } + + /* + * SSP out cfg. + * Retain bits we do not want to update, then OR in new bits + */ + ssp_curcfg = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + ssp_outcfg = (ssp_curcfg & I2S_OUT_CFG_REG_UPDATE_MASK) | ssp_newcfg; + writel(ssp_outcfg, aio->cygaud->audio + aio->regs.i2s_cfg); + + /* + * SSP in cfg. + * Retain bits we do not want to update, then OR in new bits + */ + ssp_curcfg = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + ssp_incfg = (ssp_curcfg & I2S_IN_CFG_REG_UPDATE_MASK) | ssp_newcfg; + writel(ssp_incfg, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + + val = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + /* + * Configure the word clk and bit clk as output or tristate + * Each port has 4 bits for controlling its pins. + * Shift the mask based upon port number. + */ + mask = BIT(AUD_MISC_SEROUT_LRCK_OE) + | BIT(AUD_MISC_SEROUT_SCLK_OE) + | BIT(AUD_MISC_SEROUT_MCLK_OE); + mask = mask << (aio->portnum * 4); + if (aio->is_slave) + /* Set bit for tri-state */ + val |= mask; + else + /* Clear bit for drive */ + val &= ~mask; + + dev_dbg(aio->cygaud->dev, "%s Set OE bits 0x%x\n", __func__, val); + writel(val, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + return 0; +} + +static int cygnus_ssp_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + dev_dbg(aio->cygaud->dev, + "%s cmd %d at port = %d\n", __func__, cmd, aio->portnum); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + audio_ssp_out_enable(aio); + else + audio_ssp_in_enable(aio); + cygaud->active_ports++; + + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + audio_ssp_out_disable(aio); + else + audio_ssp_in_disable(aio); + cygaud->active_ports--; + + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int cygnus_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + u32 value; + int bits_per_slot = 0; /* default to 32-bits per slot */ + int frame_bits; + unsigned int active_slots; + bool found = false; + int i; + + if (tx_mask != rx_mask) { + dev_err(aio->cygaud->dev, + "%s tx_mask must equal rx_mask\n", __func__); + return -EINVAL; + } + + active_slots = hweight32(tx_mask); + + if ((active_slots < 0) || (active_slots > 16)) + return -EINVAL; + + /* Slot value must be even */ + if (active_slots % 2) + return -EINVAL; + + /* We encode 16 slots as 0 in the reg */ + if (active_slots == 16) + active_slots = 0; + + /* Slot Width is either 16 or 32 */ + switch (slot_width) { + case 16: + bits_per_slot = 1; + break; + case 32: + bits_per_slot = 0; + break; + default: + bits_per_slot = 0; + dev_warn(aio->cygaud->dev, + "%s Defaulting Slot Width to 32\n", __func__); + } + + frame_bits = slots * slot_width; + + for (i = 0; i < ARRAY_SIZE(ssp_valid_tdm_framesize); i++) { + if (ssp_valid_tdm_framesize[i] == frame_bits) { + found = true; + break; + } + } + + if (!found) { + dev_err(aio->cygaud->dev, + "%s In TDM mode, frame bits INVALID (%d)\n", + __func__, frame_bits); + return -EINVAL; + } + + aio->bit_per_frame = frame_bits; + + dev_dbg(aio->cygaud->dev, "%s active_slots %u, bits per frame %d\n", + __func__, active_slots, frame_bits); + + /* Set capture side of ssp port */ + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT); + value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT); + value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT); + value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + + /* Set playback side of ssp port */ + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cfg); + value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT); + value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT); + value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT); + value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cfg); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); + + audio_ssp_out_disable(aio); + audio_ssp_in_disable(aio); + if (cygaud->active_ports > 0) + cygaud->active_ports--; + + return 0; +} + +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) +{ + return 0; +} +#else +#define cygnus_ssp_suspend NULL +#define cygnus_ssp_resume NULL +#endif + +static const struct snd_soc_dai_ops cygnus_ssp_dai_ops = { + .startup = cygnus_ssp_startup, + .trigger = cygnus_ssp_trigger, + .hw_params = cygnus_ssp_hw_params, + .set_fmt = cygnus_ssp_set_fmt, + .set_sysclk = cygnus_ssp_set_sysclk, + .set_tdm_slot = cygnus_set_dai_tdm_slot, +}; + + +#define INIT_CPU_DAI(num) { \ + .name = "cygnus-ssp" #num, \ + .playback = { \ + .channels_min = 1, \ + .channels_max = 16, \ + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .formats = SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE, \ + }, \ + .capture = { \ + .channels_min = 2, \ + .channels_max = 16, \ + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .formats = SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE, \ + }, \ + .ops = &cygnus_ssp_dai_ops, \ + .suspend = cygnus_ssp_suspend, \ + .resume = cygnus_ssp_resume, \ +} + +static const struct snd_soc_dai_driver cygnus_ssp_dai_info[] = { + INIT_CPU_DAI(0), + INIT_CPU_DAI(1), + INIT_CPU_DAI(2), +}; + +static struct snd_soc_dai_driver cygnus_spdif_dai_info = { + .name = "cygnus-spdif", + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + .ops = &cygnus_ssp_dai_ops, + .suspend = cygnus_ssp_suspend, + .resume = cygnus_ssp_resume, +}; + +static struct snd_soc_dai_driver cygnus_ssp_dai[CYGNUS_MAX_PORTS]; + +static const struct snd_soc_component_driver cygnus_ssp_component = { + .name = "cygnus-audio", +}; + +/* + * Return < 0 if error + * Return 0 if disabled + * Return 1 if enabled and node is parsed successfully + */ +static int parse_ssp_child_node(struct platform_device *pdev, + struct device_node *dn, + struct cygnus_audio *cygaud, + struct snd_soc_dai_driver *p_dai) +{ + struct cygnus_aio_port *aio; + struct cygnus_ssp_regs ssp_regs[3]; + u32 rawval; + int portnum = -1; + enum cygnus_audio_port_type port_type; + + if (of_property_read_u32(dn, "reg", &rawval)) { + dev_err(&pdev->dev, "Missing reg property\n"); + return -EINVAL; + } + + portnum = rawval; + switch (rawval) { + case 0: + ssp_regs[0] = INIT_SSP_REGS(0); + port_type = PORT_TDM; + break; + case 1: + ssp_regs[1] = INIT_SSP_REGS(1); + port_type = PORT_TDM; + break; + case 2: + ssp_regs[2] = INIT_SSP_REGS(2); + port_type = PORT_TDM; + break; + case 3: + port_type = PORT_SPDIF; + break; + default: + dev_err(&pdev->dev, "Bad value for reg %u\n", rawval); + return -EINVAL; + } + + aio = &cygaud->portinfo[portnum]; + aio->cygaud = cygaud; + aio->portnum = portnum; + aio->port_type = port_type; + aio->fsync_width = -1; + + if (port_type == PORT_TDM) { + aio->regs = ssp_regs[portnum]; + + *p_dai = cygnus_ssp_dai_info[portnum]; + aio->mode = CYGNUS_SSPMODE_UNKNOWN; + + } else { /* SPDIF case */ + aio->regs.bf_sourcech_cfg = BF_SRC_CFG3_OFFSET; + aio->regs.bf_sourcech_ctrl = BF_SRC_CTRL3_OFFSET; + aio->regs.i2s_mclk_cfg = SPDIF_MCLK_CFG_OFFSET; + aio->regs.i2s_stream_cfg = SPDIF_STREAM_CFG_OFFSET; + + *p_dai = cygnus_spdif_dai_info; + + /* For the purposes of this code SPDIF can be I2S mode */ + aio->mode = CYGNUS_SSPMODE_I2S; + } + + dev_dbg(&pdev->dev, "%s portnum = %d\n", __func__, aio->portnum); + aio->streams_on = 0; + aio->cygaud->dev = &pdev->dev; + + audio_ssp_init_portregs(aio); + return 0; +} + +static int audio_clk_init(struct platform_device *pdev, + struct cygnus_audio *cygaud) +{ + struct clk *parent; + int error, i, j; + char clk_name[PROP_LEN_MAX]; + + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) { + snprintf(clk_name, PROP_LEN_MAX, "ch%d_audio", i); + + cygaud->audio_clk[i] = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(cygaud->audio_clk[i])) + return PTR_ERR(cygaud->audio_clk[i]); + + error = clk_prepare_enable(cygaud->audio_clk[i]); + if (error) { + dev_err(&pdev->dev, "%s clk_prepare_enable failed %d\n", + __func__, error); + for (j = i; j > 0; j--) + clk_disable_unprepare(cygaud->audio_clk[j-1]); + return error; + } + } + + parent = clk_get_parent(cygaud->audio_clk[0]); + if (IS_ERR(parent)) { + error = PTR_ERR(parent); + goto err_get_parent; + } + + /* Set PLL VCO Frequency (Hz) to default */ + error = clk_set_rate(parent, DEFAULT_VCO); + if (error) { + dev_err(&pdev->dev, + "%s Set PLL VCO rate failed: %d\n", __func__, error); + goto err_get_parent; + } + + cygaud->vco_rate = DEFAULT_VCO; + return 0; + +err_get_parent: + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) + clk_disable_unprepare(cygaud->audio_clk[i]); + return error; +} + +static int audio_clk_exit(struct cygnus_audio *cygaud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) + clk_disable_unprepare(cygaud->audio_clk[i]); + + return 0; +} + +static int cygnus_ssp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child_node; + struct resource *res = pdev->resource; + struct cygnus_audio *cygaud; + int err = -EINVAL; + int node_count; + int active_port_count; + + cygaud = devm_kzalloc(dev, sizeof(struct cygnus_audio), GFP_KERNEL); + if (!cygaud) + return -ENOMEM; + + dev_set_drvdata(dev, cygaud); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aud"); + cygaud->audio = devm_ioremap_resource(dev, res); + if (IS_ERR(cygaud->audio)) + return PTR_ERR(cygaud->audio); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "i2s_in"); + cygaud->i2s_in = devm_ioremap_resource(dev, res); + if (IS_ERR(cygaud->i2s_in)) + return PTR_ERR(cygaud->i2s_in); + + /* Tri-state all controlable pins until we know that we need them */ + writel(CYGNUS_SSP_TRISTATE_MASK, + cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + node_count = of_get_child_count(pdev->dev.of_node); + if ((node_count < 1) || (node_count > CYGNUS_MAX_PORTS)) { + dev_err(dev, "child nodes is %d. Must be between 1 and %d\n", + node_count, CYGNUS_MAX_PORTS); + return -EINVAL; + } + + active_port_count = 0; + for_each_available_child_of_node(pdev->dev.of_node, child_node) { + err = parse_ssp_child_node(pdev, child_node, cygaud, + &cygnus_ssp_dai[active_port_count]); + + /* negative is err, 0 is active and good, 1 is disabled */ + if (err < 0) + return err; + else if (!err) { + dev_dbg(dev, "Activating DAI: %s\n", + cygnus_ssp_dai[active_port_count].name); + active_port_count++; + } + } + + cygaud->dev = dev; + cygaud->active_ports = 0; + + dev_dbg(dev, "Registering %d DAIs\n", active_port_count); + err = snd_soc_register_component(dev, &cygnus_ssp_component, + cygnus_ssp_dai, active_port_count); + if (err) { + dev_err(dev, "snd_soc_register_dai failed\n"); + return err; + } + + cygaud->irq_num = platform_get_irq(pdev, 0); + if (cygaud->irq_num <= 0) { + dev_err(dev, "platform_get_irq failed\n"); + err = cygaud->irq_num; + goto err_irq; + } + + err = audio_clk_init(pdev, cygaud); + if (err) { + dev_err(dev, "audio clock initialization failed\n"); + goto err_irq; + } + + err = cygnus_soc_platform_register(dev, cygaud); + if (err) { + dev_err(dev, "platform reg error %d\n", err); + goto err_platform_reg; + } + + return 0; + +err_platform_reg: + audio_clk_exit(cygaud); +err_irq: + snd_soc_unregister_component(dev); + return err; +} + +static int cygnus_ssp_remove(struct platform_device *pdev) +{ + struct cygnus_audio *cygaud = dev_get_drvdata(&pdev->dev); + + audio_clk_exit(cygaud); + + cygnus_soc_platform_unregister(&pdev->dev); + snd_soc_unregister_component(&pdev->dev); + + return 0; +} + +static const struct of_device_id cygnus_ssp_of_match[] = { + { .compatible = "brcm,cygnus-audio" }, + {}, +}; +MODULE_DEVICE_TABLE(of, cygnus_ssp_of_match); + +static struct platform_driver cygnus_ssp_driver = { + .probe = cygnus_ssp_probe, + .remove = cygnus_ssp_remove, + .driver = { + .name = "cygnus-ssp", + .of_match_table = cygnus_ssp_of_match, + }, +}; + +module_platform_driver(cygnus_ssp_driver); + +MODULE_ALIAS("platform:cygnus-ssp"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Cygnus ASoC SSP Interface"); diff --git a/sound/soc/bcm/cygnus-ssp.h b/sound/soc/bcm/cygnus-ssp.h new file mode 100644 index 0000000..241b81f --- /dev/null +++ b/sound/soc/bcm/cygnus-ssp.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __CYGNUS_SSP_H__ +#define __CYGNUS_SSP_H__ + +#define CYGNUS_TDM_DAI_MAX_SLOTS 16 + +#define CYGNUS_MAX_PLAYBACK_PORTS 4 +#define CYGNUS_MAX_CAPTURE_PORTS 3 +#define CYGNUS_MAX_I2S_PORTS 3 +#define CYGNUS_MAX_PORTS CYGNUS_MAX_PLAYBACK_PORTS +#define CYGNUS_AUIDO_MAX_NUM_CLKS 3 + +#define CYGNUS_SSP_FRAMEBITS_DIV 1 + +#define CYGNUS_SSPMODE_I2S 0 +#define CYGNUS_SSPMODE_TDM 1 +#define CYGNUS_SSPMODE_UNKNOWN -1 + +#define CYGNUS_SSP_CLKSRC_PLL 0 + +/* Max string length of our dt property names */ +#define PROP_LEN_MAX 40 + +struct ringbuf_regs { + unsigned rdaddr; + unsigned wraddr; + unsigned baseaddr; + unsigned endaddr; + unsigned fmark; /* freemark for play, fullmark for caputure */ + unsigned period_bytes; + unsigned buf_size; +}; + +#define RINGBUF_REG_PLAYBACK(num) ((struct ringbuf_regs) { \ + .rdaddr = SRC_RBUF_ ##num## _RDADDR_OFFSET, \ + .wraddr = SRC_RBUF_ ##num## _WRADDR_OFFSET, \ + .baseaddr = SRC_RBUF_ ##num## _BASEADDR_OFFSET, \ + .endaddr = SRC_RBUF_ ##num## _ENDADDR_OFFSET, \ + .fmark = SRC_RBUF_ ##num## _FREE_MARK_OFFSET, \ + .period_bytes = 0, \ + .buf_size = 0, \ +}) + +#define RINGBUF_REG_CAPTURE(num) ((struct ringbuf_regs) { \ + .rdaddr = DST_RBUF_ ##num## _RDADDR_OFFSET, \ + .wraddr = DST_RBUF_ ##num## _WRADDR_OFFSET, \ + .baseaddr = DST_RBUF_ ##num## _BASEADDR_OFFSET, \ + .endaddr = DST_RBUF_ ##num## _ENDADDR_OFFSET, \ + .fmark = DST_RBUF_ ##num## _FULL_MARK_OFFSET, \ + .period_bytes = 0, \ + .buf_size = 0, \ +}) + +enum cygnus_audio_port_type { + PORT_TDM, + PORT_SPDIF, +}; + +struct cygnus_ssp_regs { + u32 i2s_stream_cfg; + u32 i2s_cfg; + u32 i2s_cap_stream_cfg; + u32 i2s_cap_cfg; + u32 i2s_mclk_cfg; + + u32 bf_destch_ctrl; + u32 bf_destch_cfg; + u32 bf_sourcech_ctrl; + u32 bf_sourcech_cfg; + u32 bf_sourcech_grp; +}; + +struct cygnus_aio_port { + int portnum; + int mode; + bool is_slave; + int streams_on; /* will be 0 if both capture and play are off */ + int fsync_width; + int port_type; + + u32 mclk; + u32 lrclk; + u32 bit_per_frame; + + struct cygnus_audio *cygaud; + struct cygnus_ssp_regs regs; + + struct ringbuf_regs play_rb_regs; + struct ringbuf_regs capture_rb_regs; + + struct snd_pcm_substream *play_stream; + struct snd_pcm_substream *capture_stream; +}; + + +struct cygnus_audio { + struct cygnus_aio_port portinfo[CYGNUS_MAX_PORTS]; + + int irq_num; + void __iomem *audio; + struct device *dev; + void __iomem *i2s_in; + + struct clk *audio_clk[CYGNUS_AUIDO_MAX_NUM_CLKS]; + int active_ports; + unsigned long vco_rate; +}; + +extern int cygnus_ssp_get_mode(struct snd_soc_dai *cpu_dai); +extern int cygnus_ssp_add_pll_tweak_controls(struct snd_soc_pcm_runtime *rtd); +extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, + int len); +extern int cygnus_soc_platform_register(struct device *dev, + struct cygnus_audio *cygaud); +extern int cygnus_soc_platform_unregister(struct device *dev); +extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, + int len); +#endif -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel This patch adds Cygnus audio DAI driver. It supports I2S, TDM and SPDIF modes and uses three clocks derived from PLL. This patchset has been tested on Cygnus wireless audio bcm958305K board. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <arunp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++++ 2 files changed, 1637 insertions(+) create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h diff --git a/sound/soc/bcm/cygnus-ssp.c b/sound/soc/bcm/cygnus-ssp.c new file mode 100644 index 0000000..f9f321b --- /dev/null +++ b/sound/soc/bcm/cygnus-ssp.c @@ -0,0 +1,1508 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "cygnus-ssp.h" + +#define DEFAULT_VCO 1354750204 + +#define CYGNUS_TDM_RATE \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define CAPTURE_FCI_ID_BASE 0x180 +#define CYGNUS_SSP_TRISTATE_MASK 0x001fff + +/* Used with stream_on field to indicate which streams are active */ +#define PLAYBACK_STREAM_MASK BIT(0) +#define CAPTURE_STREAM_MASK BIT(1) + +#define I2S_STREAM_CFG_MASK 0xff003ff +#define I2S_CAP_STREAM_CFG_MASK 0xf0 +#define SPDIF_STREAM_CFG_MASK 0x3ff +#define CH_GRP_STEREO 0x1 + +/* Begin register offset defines */ +#define AUD_MISC_SEROUT_OE_REG_BASE 0x01c +#define AUD_MISC_SEROUT_SPDIF_OE 13 +#define AUD_MISC_SEROUT_MCLK_OE 3 +#define AUD_MISC_SEROUT_LRCK_OE 2 +#define AUD_MISC_SEROUT_SCLK_OE 1 +#define AUD_MISC_SEROUT_SDAT_OE 0 + +/* AUD_FMM_BF_CTRL_xxx regs */ +#define BF_DST_CFG0_OFFSET 0x100 +#define BF_DST_CFG1_OFFSET 0x104 +#define BF_DST_CFG2_OFFSET 0x108 + +#define BF_DST_CTRL0_OFFSET 0x130 +#define BF_DST_CTRL1_OFFSET 0x134 +#define BF_DST_CTRL2_OFFSET 0x138 + +#define BF_SRC_CFG0_OFFSET 0x148 +#define BF_SRC_CFG1_OFFSET 0x14c +#define BF_SRC_CFG2_OFFSET 0x150 +#define BF_SRC_CFG3_OFFSET 0x154 + +#define BF_SRC_CTRL0_OFFSET 0x1c0 +#define BF_SRC_CTRL1_OFFSET 0x1c4 +#define BF_SRC_CTRL2_OFFSET 0x1c8 +#define BF_SRC_CTRL3_OFFSET 0x1cc + +#define BF_SRC_GRP0_OFFSET 0x1fc +#define BF_SRC_GRP1_OFFSET 0x200 +#define BF_SRC_GRP2_OFFSET 0x204 +#define BF_SRC_GRP3_OFFSET 0x208 + +#define BF_SRC_GRP_EN_OFFSET 0x320 +#define BF_SRC_GRP_FLOWON_OFFSET 0x324 +#define BF_SRC_GRP_SYNC_DIS_OFFSET 0x328 + +/* AUD_FMM_IOP_OUT_I2S_xxx regs */ +#define OUT_I2S_0_STREAM_CFG_OFFSET 0xa00 +#define OUT_I2S_0_CFG_OFFSET 0xa04 +#define OUT_I2S_0_MCLK_CFG_OFFSET 0xa0c + +#define OUT_I2S_1_STREAM_CFG_OFFSET 0xa40 +#define OUT_I2S_1_CFG_OFFSET 0xa44 +#define OUT_I2S_1_MCLK_CFG_OFFSET 0xa4c + +#define OUT_I2S_2_STREAM_CFG_OFFSET 0xa80 +#define OUT_I2S_2_CFG_OFFSET 0xa84 +#define OUT_I2S_2_MCLK_CFG_OFFSET 0xa8c + +/* AUD_FMM_IOP_OUT_SPDIF_xxx regs */ +#define SPDIF_STREAM_CFG_OFFSET 0xac0 +#define SPDIF_CTRL_OFFSET 0xac4 +#define SPDIF_FORMAT_CFG_OFFSET 0xad8 +#define SPDIF_MCLK_CFG_OFFSET 0xadc + +/* AUD_FMM_IOP_PLL_0_xxx regs */ +#define IOP_PLL_0_MACRO_OFFSET 0xb00 +#define IOP_PLL_0_MDIV_Ch0_OFFSET 0xb14 +#define IOP_PLL_0_MDIV_Ch1_OFFSET 0xb18 +#define IOP_PLL_0_MDIV_Ch2_OFFSET 0xb1c + +#define IOP_PLL_0_ACTIVE_MDIV_Ch0_OFFSET 0xb30 +#define IOP_PLL_0_ACTIVE_MDIV_Ch1_OFFSET 0xb34 +#define IOP_PLL_0_ACTIVE_MDIV_Ch2_OFFSET 0xb38 + +/* AUD_FMM_IOP_xxx regs */ +#define IOP_PLL_0_CONTROL_OFFSET 0xb04 +#define IOP_PLL_0_USER_NDIV_OFFSET 0xb08 +#define IOP_PLL_0_ACTIVE_NDIV_OFFSET 0xb20 +#define IOP_PLL_0_RESET_OFFSET 0xb5c + +/* AUD_FMM_IOP_IN_I2S_xxx regs */ +#define IN_I2S_0_STREAM_CFG_OFFSET 0x00 +#define IN_I2S_0_CFG_OFFSET 0x04 +#define IN_I2S_1_STREAM_CFG_OFFSET 0x40 +#define IN_I2S_1_CFG_OFFSET 0x44 +#define IN_I2S_2_STREAM_CFG_OFFSET 0x80 +#define IN_I2S_2_CFG_OFFSET 0x84 + +/* AUD_FMM_IOP_MISC_xxx regs */ +#define IOP_SW_INIT_LOGIC 0x1c0 + +/* End register offset defines */ + + +/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_0_REG */ +#define I2S_OUT_MCLKRATE_SHIFT 16 + +/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_REG */ +#define I2S_OUT_PLLCLKSEL_SHIFT 0 + +/* AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG */ +#define I2S_OUT_STREAM_ENA 31 +#define I2S_OUT_STREAM_CFG_GROUP_ID 20 +#define I2S_OUT_STREAM_CFG_CHANNEL_GROUPING 24 + +/* AUD_FMM_IOP_IN_I2S_x_CAP */ +#define I2S_IN_STREAM_CFG_CAP_ENA 31 +#define I2S_IN_STREAM_CFG_0_GROUP_ID 4 + +/* AUD_FMM_IOP_OUT_I2S_x_I2S_CFG_REG */ +#define I2S_OUT_CFGX_CLK_ENA 0 +#define I2S_OUT_CFGX_DATA_ENABLE 1 +#define I2S_OUT_CFGX_DATA_ALIGNMENT 6 +#define I2S_OUT_CFGX_BITS_PER_SLOT 13 +#define I2S_OUT_CFGX_VALID_SLOT 14 +#define I2S_OUT_CFGX_FSYNC_WIDTH 18 +#define I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32 26 +#define I2S_OUT_CFGX_SLAVE_MODE 30 +#define I2S_OUT_CFGX_TDM_MODE 31 + +/* AUD_FMM_BF_CTRL_SOURCECH_CFGx_REG */ +#define BF_SRC_CFGX_SFIFO_ENA 0 +#define BF_SRC_CFGX_BUFFER_PAIR_ENABLE 1 +#define BF_SRC_CFGX_SAMPLE_CH_MODE 2 +#define BF_SRC_CFGX_SFIFO_SZ_DOUBLE 5 +#define BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY 10 +#define BF_SRC_CFGX_BIT_RES 20 +#define BF_SRC_CFGX_PROCESS_SEQ_ID_VALID 31 + +/* AUD_FMM_BF_CTRL_DESTCH_CFGx_REG */ +#define BF_DST_CFGX_CAP_ENA 0 +#define BF_DST_CFGX_BUFFER_PAIR_ENABLE 1 +#define BF_DST_CFGX_DFIFO_SZ_DOUBLE 2 +#define BF_DST_CFGX_NOT_PAUSE_WHEN_FULL 11 +#define BF_DST_CFGX_FCI_ID 12 +#define BF_DST_CFGX_CAP_MODE 24 +#define BF_DST_CFGX_PROC_SEQ_ID_VALID 31 + +/* AUD_FMM_IOP_OUT_SPDIF_xxx */ +#define SPDIF_0_OUT_DITHER_ENA 3 +#define SPDIF_0_OUT_STREAM_ENA 31 + +/* AUD_FMM_IOP_PLL_0_USER */ +#define IOP_PLL_0_USER_NDIV_FRAC 10 + +/* AUD_FMM_IOP_PLL_0_ACTIVE */ +#define IOP_PLL_0_ACTIVE_NDIV_FRAC 10 + + +#define INIT_SSP_REGS(num) (struct cygnus_ssp_regs){ \ + .i2s_stream_cfg = OUT_I2S_ ##num## _STREAM_CFG_OFFSET, \ + .i2s_cap_stream_cfg = IN_I2S_ ##num## _STREAM_CFG_OFFSET, \ + .i2s_cfg = OUT_I2S_ ##num## _CFG_OFFSET, \ + .i2s_cap_cfg = IN_I2S_ ##num## _CFG_OFFSET, \ + .i2s_mclk_cfg = OUT_I2S_ ##num## _MCLK_CFG_OFFSET, \ + .bf_destch_ctrl = BF_DST_CTRL ##num## _OFFSET, \ + .bf_destch_cfg = BF_DST_CFG ##num## _OFFSET, \ + .bf_sourcech_ctrl = BF_SRC_CTRL ##num## _OFFSET, \ + .bf_sourcech_cfg = BF_SRC_CFG ##num## _OFFSET, \ + .bf_sourcech_grp = BF_SRC_GRP ##num## _OFFSET \ +} + +struct pll_macro_entry { + u32 mclk; + u32 pll_ch_num; + unsigned long vco_rate; +}; + +/* + * PLL has 3 output channels (1x, 2x, and 4x). Below are + * the common MCLK frequencies used by audio driver + */ +static const struct pll_macro_entry pll_predef_mclk[] = { + { 4096000, 0, 1769470191UL}, + { 8192000, 1, 1769470191UL}, + {16384000, 2, 1769470191UL}, + + { 5644800, 0, 1354750204UL}, + {11289600, 1, 1354750204UL}, + {22579200, 2, 1354750204UL}, + + { 6144000, 0, 1769470191UL}, + {12288000, 1, 1769470191UL}, + {24576000, 2, 1769470191UL}, + + {12288000, 0, 1769470191UL}, + {24576000, 1, 1769470191UL}, + {49152000, 2, 1769470191UL}, + + {22579200, 0, 1354750204UL}, + {45158400, 1, 1354750204UL}, + {90316800, 2, 1354750204UL}, + + {24576000, 0, 1769470191UL}, + {49152000, 1, 1769470191UL}, + {98304000, 2, 1769470191UL}, +}; + +/* List of valid frame sizes for tdm mode */ +static const int ssp_valid_tdm_framesize[] = {32, 64, 128, 256, 512}; + +/* + * Use this relationship to derive the sampling rate (lrclk) + * lrclk = (mclk) / ((2*mclk_to_sclk_ratio) * (32 * SCLK))). + * + * Use mclk and pll_ch from the table above + * + * Valid SCLK = 0/1/2/4/8/12 + * + * mclk_to_sclk_ratio = number of MCLK per SCLK. Division is twice the + * value programmed in this field. + * Valid mclk_to_sclk_ratio = 1 through to 15 + * + * eg: To set lrclk = 48khz, set mclk = 12288000, mclk_to_sclk_ratio = 2, + * SCLK = 64 + */ +struct _ssp_clk_coeff { + u32 mclk; + u32 sclk_rate; + u32 rate; + u32 mclk_rate; +}; + +static const struct _ssp_clk_coeff ssp_clk_coeff[] = { + { 4096000, 32, 16000, 4}, + { 4096000, 32, 32000, 2}, + { 4096000, 64, 8000, 4}, + { 4096000, 64, 16000, 2}, + { 4096000, 64, 32000, 1}, + { 4096000, 128, 8000, 2}, + { 4096000, 128, 16000, 1}, + { 4096000, 256, 8000, 1}, + + { 6144000, 32, 16000, 6}, + { 6144000, 32, 32000, 3}, + { 6144000, 32, 48000, 2}, + { 6144000, 32, 96000, 1}, + { 6144000, 64, 8000, 6}, + { 6144000, 64, 16000, 3}, + { 6144000, 64, 48000, 1}, + { 6144000, 128, 8000, 3}, + + { 8192000, 32, 32000, 4}, + { 8192000, 64, 16000, 4}, + { 8192000, 64, 32000, 2}, + { 8192000, 128, 8000, 4}, + { 8192000, 128, 16000, 2}, + { 8192000, 128, 32000, 1}, + { 8192000, 256, 8000, 2}, + { 8192000, 256, 16000, 1}, + { 8192000, 512, 8000, 1}, + + {12288000, 32, 32000, 6}, + {12288000, 32, 48000, 4}, + {12288000, 32, 96000, 2}, + {12288000, 32, 192000, 1}, + {12288000, 64, 16000, 6}, + {12288000, 64, 32000, 3}, + {12288000, 64, 48000, 2}, + {12288000, 64, 96000, 1}, + {12288000, 128, 8000, 6}, + {12288000, 128, 16000, 3}, + {12288000, 128, 48000, 1}, + {12288000, 256, 8000, 3}, + + {16384000, 64, 32000, 4}, + {16384000, 128, 16000, 4}, + {16384000, 128, 32000, 2}, + {16384000, 256, 8000, 4}, + {16384000, 256, 16000, 2}, + {16384000, 256, 32000, 1}, + {16384000, 512, 8000, 2}, + {16384000, 512, 16000, 1}, + + {24576000, 32, 96000, 4}, + {24576000, 32, 192000, 2}, + {24576000, 64, 32000, 6}, + {24576000, 64, 48000, 4}, + {24576000, 64, 96000, 2}, + {24576000, 64, 192000, 1}, + {24576000, 128, 16000, 6}, + {24576000, 128, 32000, 3}, + {24576000, 128, 48000, 2}, + {24576000, 256, 8000, 6}, + {24576000, 256, 16000, 3}, + {24576000, 256, 48000, 1}, + {24576000, 512, 8000, 3}, + + {49152000, 32, 192000, 4}, + {49152000, 64, 96000, 4}, + {49152000, 64, 192000, 2}, + {49152000, 128, 32000, 6}, + {49152000, 128, 48000, 4}, + {49152000, 128, 96000, 2}, + {49152000, 128, 192000, 1}, + {49152000, 256, 16000, 6}, + {49152000, 256, 32000, 3}, + {49152000, 256, 48000, 2}, + {49152000, 256, 96000, 1}, + {49152000, 512, 8000, 6}, + {49152000, 512, 16000, 3}, + {49152000, 512, 48000, 1}, + + { 5644800, 32, 22050, 4}, + { 5644800, 32, 44100, 2}, + { 5644800, 32, 88200, 1}, + { 5644800, 64, 11025, 4}, + { 5644800, 64, 22050, 2}, + { 5644800, 64, 44100, 1}, + + {11289600, 32, 44100, 4}, + {11289600, 32, 88200, 2}, + {11289600, 32, 176400, 1}, + {11289600, 64, 22050, 4}, + {11289600, 64, 44100, 2}, + {11289600, 64, 88200, 1}, + {11289600, 128, 11025, 4}, + {11289600, 128, 22050, 2}, + {11289600, 128, 44100, 1}, + + {22579200, 32, 88200, 4}, + {22579200, 32, 176400, 2}, + {22579200, 64, 44100, 4}, + {22579200, 64, 88200, 2}, + {22579200, 64, 176400, 1}, + {22579200, 128, 22050, 4}, + {22579200, 128, 44100, 2}, + {22579200, 128, 88200, 1}, + {22579200, 256, 11025, 4}, + {22579200, 256, 22050, 2}, + {22579200, 256, 44100, 1}, + + {45158400, 32, 176400, 4}, + {45158400, 64, 88200, 4}, + {45158400, 64, 176400, 2}, + {45158400, 128, 44100, 4}, + {45158400, 128, 88200, 2}, + {45158400, 128, 176400, 1}, + {45158400, 256, 22050, 4}, + {45158400, 256, 44100, 2}, + {45158400, 256, 88200, 1}, + {45158400, 512, 11025, 4}, + {45158400, 512, 22050, 2}, + {45158400, 512, 44100, 1}, +}; + +static struct cygnus_aio_port *cygnus_dai_get_portinfo(struct snd_soc_dai *dai) +{ + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + return &cygaud->portinfo[dai->id]; +} + +static int audio_ssp_init_portregs(struct cygnus_aio_port *aio) +{ + u32 value, fci_id; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value &= ~I2S_STREAM_CFG_MASK; + + /* Set Group ID */ + writel(aio->portnum, aio->cygaud->audio + + aio->regs.bf_sourcech_grp); + + /* Configure the AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG reg */ + value |= aio->portnum << I2S_OUT_STREAM_CFG_GROUP_ID; + value |= aio->portnum; /* FCI ID is the port num */ + value |= CH_GRP_STEREO << I2S_OUT_STREAM_CFG_CHANNEL_GROUPING; + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + /* Configure the AUD_FMM_BF_CTRL_SOURCECH_CFGX reg */ + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY); + value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE); + value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* Configure the AUD_FMM_IOP_IN_I2S_x_CAP_STREAM_CFG_0 reg */ + value = readl(aio->cygaud->i2s_in + + aio->regs.i2s_cap_stream_cfg); + value &= ~I2S_CAP_STREAM_CFG_MASK; + value |= aio->portnum << I2S_IN_STREAM_CFG_0_GROUP_ID; + writel(value, aio->cygaud->i2s_in + + aio->regs.i2s_cap_stream_cfg); + + /* Configure the AUD_FMM_BF_CTRL_DESTCH_CFGX_REG_BASE reg */ + fci_id = CAPTURE_FCI_ID_BASE + aio->portnum; + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_DFIFO_SZ_DOUBLE); + value &= ~BIT(BF_DST_CFGX_NOT_PAUSE_WHEN_FULL); + value |= (fci_id << BF_DST_CFGX_FCI_ID); + value |= BIT(BF_DST_CFGX_PROC_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); + + /* Enable the transmit pin for this port */ + value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + value &= ~BIT((aio->portnum * 4) + AUD_MISC_SEROUT_SDAT_OE); + writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + break; + case PORT_SPDIF: + writel(aio->portnum, aio->cygaud->audio + BF_SRC_GRP3_OFFSET); + + value = readl(aio->cygaud->audio + SPDIF_CTRL_OFFSET); + value |= BIT(SPDIF_0_OUT_DITHER_ENA); + writel(value, aio->cygaud->audio + SPDIF_CTRL_OFFSET); + + /* Enable and set the FCI ID for the SPDIF channel */ + value = readl(aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET); + value &= ~SPDIF_STREAM_CFG_MASK; + value |= aio->portnum; /* FCI ID is the port num */ + value |= BIT(SPDIF_0_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY); + value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE); + value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* Enable the spdif output pin */ + value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + value &= ~BIT(AUD_MISC_SEROUT_SPDIF_OE); + writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + break; + default: + dev_err(aio->cygaud->dev, "Port not supported\n"); + status = -EINVAL; + } + + return status; +} + +static void audio_ssp_in_enable(struct cygnus_aio_port *aio) +{ + u32 value; + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_CAP_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); + + writel(0x1, aio->cygaud->audio + aio->regs.bf_destch_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value |= BIT(I2S_OUT_CFGX_CLK_ENA); + value |= BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + value |= BIT(I2S_IN_STREAM_CFG_CAP_ENA); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + + aio->streams_on |= CAPTURE_STREAM_MASK; +} + +static void audio_ssp_in_disable(struct cygnus_aio_port *aio) +{ + u32 value; + + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + value &= ~BIT(I2S_IN_STREAM_CFG_CAP_ENA); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + + aio->streams_on &= ~CAPTURE_STREAM_MASK; + + /* If both playback and capture are off */ + if (!aio->streams_on) { + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~BIT(I2S_OUT_CFGX_CLK_ENA); + value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + } + + writel(0x0, aio->cygaud->audio + aio->regs.bf_destch_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value &= ~BIT(BF_DST_CFGX_CAP_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); +} + +static int audio_ssp_out_enable(struct cygnus_aio_port *aio) +{ + u32 value; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value |= BIT(I2S_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value |= BIT(I2S_OUT_CFGX_CLK_ENA); + value |= BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + aio->streams_on |= PLAYBACK_STREAM_MASK; + break; + case PORT_SPDIF: + value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + value |= 0x3; + writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + + writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + break; + default: + dev_err(aio->cygaud->dev, + "Port not supported %d\n", aio->portnum); + status = -EINVAL; + } + + return status; +} + +static int audio_ssp_out_disable(struct cygnus_aio_port *aio) +{ + u32 value; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + aio->streams_on &= ~PLAYBACK_STREAM_MASK; + + /* If both playback and capture are off */ + if (!aio->streams_on) { + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~BIT(I2S_OUT_CFGX_CLK_ENA); + value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + } + + /* set group_sync_dis = 1 */ + value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + value |= BIT(aio->portnum); + writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + + writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* set group_sync_dis = 0 */ + value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + value &= ~BIT(aio->portnum); + writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value &= ~BIT(I2S_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + /* IOP SW INIT on OUT_I2S_x */ + value = readl(aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + value |= BIT(aio->portnum); + writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + value &= ~BIT(aio->portnum); + writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + break; + case PORT_SPDIF: + value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + value &= ~0x3; + writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + break; + default: + dev_err(aio->cygaud->dev, + "Port not supported %d\n", aio->portnum); + status = -EINVAL; + } + + return status; +} + +static int configure_vco(struct cygnus_audio *cygaud, + unsigned long vco_rate) +{ + struct clk *parent; + int error; + + if (vco_rate == cygaud->vco_rate) + return 0; + + /* Change PLL rate only if none of the ports are active */ + if (!cygaud->active_ports) { + parent = clk_get_parent(cygaud->audio_clk[0]); + if (IS_ERR(parent)) + return PTR_ERR(parent); + + /* Set PLL VCO Frequency (Hz) */ + error = clk_set_rate(parent, vco_rate); + if (error) { + dev_err(cygaud->dev, "%s Set PLL VCO rate failed: %d\n", + __func__, error); + return error; + } + cygaud->vco_rate = vco_rate; + } else { + dev_err(cygaud->dev, "%s Cannot change VCO Freq\n", + __func__); + return -EINVAL; + } + + return 0; +} + +static int pll_configure_mclk(struct cygnus_audio *cygaud, u32 mclk, + struct device *dev) +{ + int i = 0, error; + bool found = false; + const struct pll_macro_entry *p_entry; + struct clk *ch_clk; + unsigned long vco_rate = 0; + + for (i = 0; i < ARRAY_SIZE(pll_predef_mclk); i++) { + p_entry = &pll_predef_mclk[i]; + + if (p_entry->mclk == mclk) { + found = true; + vco_rate = p_entry->vco_rate; + break; + } + } + if (!found) { + dev_err(dev, + "%s No valid mclk freq (%u) found!\n", __func__, mclk); + return -EINVAL; + } + + error = configure_vco(cygaud, vco_rate); + if (error) + return error; + + ch_clk = cygaud->audio_clk[p_entry->pll_ch_num]; + + error = clk_set_rate(ch_clk, mclk); + if (error) { + dev_err(dev, "%s Set MCLK rate failed: %d\n", __func__, error); + return error; + } + return p_entry->pll_ch_num; +} + +static int cygnus_ssp_set_clocks(struct cygnus_aio_port *aio, + struct cygnus_audio *cygaud) +{ + u32 value, i = 0; + u32 mask = 0xf; + u32 sclk; + bool found = false; + const struct _ssp_clk_coeff *p_entry = NULL; + + if ((!aio->lrclk) || (!aio->bit_per_frame)) { + dev_err(aio->cygaud->dev, "First set up port through hw_params()\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(ssp_clk_coeff); i++) { + p_entry = &ssp_clk_coeff[i]; + if ((p_entry->rate == aio->lrclk) && + (p_entry->sclk_rate == aio->bit_per_frame) && + (p_entry->mclk == aio->mclk)) { + found = true; + break; + } + } + if (!found) { + dev_err(aio->cygaud->dev, + "No valid match found in ssp_clk_coeff array\n"); + dev_err(aio->cygaud->dev, "lrclk = %u, bits/frame = %u, mclk = %u\n", + aio->lrclk, aio->bit_per_frame, aio->mclk); + return -EINVAL; + } + + sclk = aio->bit_per_frame; + if (sclk == 512) + sclk = 0; + /* sclks_per_1fs_div = sclk cycles/32 */ + sclk /= 32; + /* Set sclk rate */ + if (aio->port_type == PORT_TDM) { + /* Set number of bitclks per frame */ + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~(mask << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32); + value |= sclk << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32; + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + dev_dbg(aio->cygaud->dev, + "SCLKS_PER_1FS_DIV32 = 0x%x\n", value); + } + + /* Set MCLK_RATE ssp port (spdif and ssp are the same) */ + value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + value &= ~(0xf << I2S_OUT_MCLKRATE_SHIFT); + value |= (p_entry->mclk_rate << I2S_OUT_MCLKRATE_SHIFT); + writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + + dev_dbg(aio->cygaud->dev, "mclk cfg reg = 0x%x\n", value); + dev_dbg(aio->cygaud->dev, "bits per frame = %u, mclk = %u Hz, lrclk = %u Hz\n", + aio->bit_per_frame, aio->mclk, aio->lrclk); + return 0; +} + +static int cygnus_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + int rate, bitres; + u32 value; + u32 mask = 0x1f; + int ret = 0; + + dev_dbg(aio->cygaud->dev, "%s port = %d\n", __func__, aio->portnum); + dev_dbg(aio->cygaud->dev, "params_channels %d\n", + params_channels(params)); + dev_dbg(aio->cygaud->dev, "rate %d\n", params_rate(params)); + dev_dbg(aio->cygaud->dev, "format %d\n", params_format(params)); + + rate = params_rate(params); + + switch (aio->mode) { + case CYGNUS_SSPMODE_TDM: + if ((rate == 192000) && (params_channels(params) > 4)) { + dev_err(aio->cygaud->dev, "Cannot run %d channels at %dHz\n", + params_channels(params), rate); + return -EINVAL; + } + break; + case CYGNUS_SSPMODE_I2S: + aio->bit_per_frame = 64; /* I2S must be 64 bit per frame */ + break; + default: + dev_err(aio->cygaud->dev, + "%s port running in unknown mode\n", __func__); + return -EINVAL; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Configure channels as mono or stereo */ + if (params_channels(params) == 1) { + value = readl(aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SAMPLE_CH_MODE); + value &= ~BIT(BF_SRC_CFGX_BUFFER_PAIR_ENABLE); + writel(value, aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + } else { + value = readl(aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SAMPLE_CH_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + } + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bitres = 8; + break; + + case SNDRV_PCM_FORMAT_S16_LE: + bitres = 16; + break; + + case SNDRV_PCM_FORMAT_S32_LE: + case SNDRV_PCM_FORMAT_S24_LE: + /* 32 bit mode is coded as 0 */ + bitres = 0; + break; + + default: + return -EINVAL; + } + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~(mask << BF_SRC_CFGX_BIT_RES); + value |= (bitres << BF_SRC_CFGX_BIT_RES); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + } else { + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + value = readl(aio->cygaud->audio + + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_CAP_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_destch_cfg); + break; + + case SNDRV_PCM_FORMAT_S32_LE: + case SNDRV_PCM_FORMAT_S24_LE: + value = readl(aio->cygaud->audio + + aio->regs.bf_destch_cfg); + value &= ~BIT(BF_DST_CFGX_CAP_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_destch_cfg); + break; + + default: + return -EINVAL; + } + } + + aio->lrclk = rate; + + if (!aio->is_slave) + ret = cygnus_ssp_set_clocks(aio, cygaud); + + return ret; +} + +/* + * This function sets the mclk frequency for pll clock + */ +static int cygnus_ssp_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + int sel; + u32 value; + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + dev_dbg(aio->cygaud->dev, + "%s Enter port = %d\n", __func__, aio->portnum); + sel = pll_configure_mclk(cygaud, freq, aio->cygaud->dev); + if (sel < 0) { + dev_err(aio->cygaud->dev, + "%s Setting mclk failed.\n", __func__); + return -EINVAL; + } + + aio->mclk = freq; + + dev_dbg(aio->cygaud->dev, "%s Setting MCLKSEL to %d\n", __func__, sel); + value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + value &= ~(0xf << I2S_OUT_PLLCLKSEL_SHIFT); + value |= (sel << I2S_OUT_PLLCLKSEL_SHIFT); + writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + + return 0; +} + +static int cygnus_ssp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + + snd_soc_dai_set_dma_data(dai, substream, aio); + + return 0; +} + +/* + * Bit Update Notes + * 31 Yes TDM Mode (1 = TDM, 0 = i2s) + * 30 Yes Slave Mode (1 = Slave, 0 = Master) + * 29:26 No Sclks per frame + * 25:18 Yes FS Width + * 17:14 No Valid Slots + * 13 No Bits (1 = 16 bits, 0 = 32 bits) + * 12:08 No Bits per samp + * 07 Yes Justifcation (1 = LSB, 0 = MSB) + * 06 Yes Alignment (1 = Delay 1 clk, 0 = no delay + * 05 Yes SCLK polarity (1 = Rising, 0 = Falling) + * 04 Yes LRCLK Polarity (1 = High for left, 0 = Low for left) + * 03:02 Yes Reserved - write as zero + * 01 No Data Enable + * 00 No CLK Enable + */ +#define I2S_OUT_CFG_REG_UPDATE_MASK 0x3C03FF03 + +/* Input cfg is same as output, but the FS width is not a valid field */ +#define I2S_IN_CFG_REG_UPDATE_MASK (I2S_OUT_CFG_REG_UPDATE_MASK | 0x03FC0000) + +int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, int len) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + + if ((len > 0) && (len < 256)) { + aio->fsync_width = len; + return 0; + } else { + return -EINVAL; + } +} + +static int cygnus_ssp_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + u32 ssp_curcfg; + u32 ssp_newcfg; + u32 ssp_outcfg; + u32 ssp_incfg; + u32 val; + u32 mask; + + dev_dbg(aio->cygaud->dev, "%s Enter fmt: %x\n", __func__, fmt); + + if (aio->port_type == PORT_SPDIF) + return -EINVAL; + + ssp_newcfg = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ssp_newcfg |= BIT(I2S_OUT_CFGX_SLAVE_MODE); + aio->is_slave = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + ssp_newcfg &= ~BIT(I2S_OUT_CFGX_SLAVE_MODE); + aio->is_slave = 0; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT); + ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH); + aio->mode = CYGNUS_SSPMODE_I2S; + break; + + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + ssp_newcfg |= BIT(I2S_OUT_CFGX_TDM_MODE); + + /* DSP_A = data after FS, DSP_B = data during FS */ + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_DSP_A) + ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT); + + if ((aio->fsync_width > 0) && (aio->fsync_width < 256)) + ssp_newcfg |= + (aio->fsync_width << I2S_OUT_CFGX_FSYNC_WIDTH); + else + ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH); + + aio->mode = CYGNUS_SSPMODE_TDM; + break; + + default: + return -EINVAL; + } + + /* + * SSP out cfg. + * Retain bits we do not want to update, then OR in new bits + */ + ssp_curcfg = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + ssp_outcfg = (ssp_curcfg & I2S_OUT_CFG_REG_UPDATE_MASK) | ssp_newcfg; + writel(ssp_outcfg, aio->cygaud->audio + aio->regs.i2s_cfg); + + /* + * SSP in cfg. + * Retain bits we do not want to update, then OR in new bits + */ + ssp_curcfg = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + ssp_incfg = (ssp_curcfg & I2S_IN_CFG_REG_UPDATE_MASK) | ssp_newcfg; + writel(ssp_incfg, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + + val = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + /* + * Configure the word clk and bit clk as output or tristate + * Each port has 4 bits for controlling its pins. + * Shift the mask based upon port number. + */ + mask = BIT(AUD_MISC_SEROUT_LRCK_OE) + | BIT(AUD_MISC_SEROUT_SCLK_OE) + | BIT(AUD_MISC_SEROUT_MCLK_OE); + mask = mask << (aio->portnum * 4); + if (aio->is_slave) + /* Set bit for tri-state */ + val |= mask; + else + /* Clear bit for drive */ + val &= ~mask; + + dev_dbg(aio->cygaud->dev, "%s Set OE bits 0x%x\n", __func__, val); + writel(val, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + return 0; +} + +static int cygnus_ssp_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + dev_dbg(aio->cygaud->dev, + "%s cmd %d at port = %d\n", __func__, cmd, aio->portnum); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + audio_ssp_out_enable(aio); + else + audio_ssp_in_enable(aio); + cygaud->active_ports++; + + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + audio_ssp_out_disable(aio); + else + audio_ssp_in_disable(aio); + cygaud->active_ports--; + + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int cygnus_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + u32 value; + int bits_per_slot = 0; /* default to 32-bits per slot */ + int frame_bits; + unsigned int active_slots; + bool found = false; + int i; + + if (tx_mask != rx_mask) { + dev_err(aio->cygaud->dev, + "%s tx_mask must equal rx_mask\n", __func__); + return -EINVAL; + } + + active_slots = hweight32(tx_mask); + + if ((active_slots < 0) || (active_slots > 16)) + return -EINVAL; + + /* Slot value must be even */ + if (active_slots % 2) + return -EINVAL; + + /* We encode 16 slots as 0 in the reg */ + if (active_slots == 16) + active_slots = 0; + + /* Slot Width is either 16 or 32 */ + switch (slot_width) { + case 16: + bits_per_slot = 1; + break; + case 32: + bits_per_slot = 0; + break; + default: + bits_per_slot = 0; + dev_warn(aio->cygaud->dev, + "%s Defaulting Slot Width to 32\n", __func__); + } + + frame_bits = slots * slot_width; + + for (i = 0; i < ARRAY_SIZE(ssp_valid_tdm_framesize); i++) { + if (ssp_valid_tdm_framesize[i] == frame_bits) { + found = true; + break; + } + } + + if (!found) { + dev_err(aio->cygaud->dev, + "%s In TDM mode, frame bits INVALID (%d)\n", + __func__, frame_bits); + return -EINVAL; + } + + aio->bit_per_frame = frame_bits; + + dev_dbg(aio->cygaud->dev, "%s active_slots %u, bits per frame %d\n", + __func__, active_slots, frame_bits); + + /* Set capture side of ssp port */ + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT); + value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT); + value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT); + value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + + /* Set playback side of ssp port */ + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cfg); + value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT); + value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT); + value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT); + value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cfg); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); + + audio_ssp_out_disable(aio); + audio_ssp_in_disable(aio); + if (cygaud->active_ports > 0) + cygaud->active_ports--; + + return 0; +} + +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) +{ + return 0; +} +#else +#define cygnus_ssp_suspend NULL +#define cygnus_ssp_resume NULL +#endif + +static const struct snd_soc_dai_ops cygnus_ssp_dai_ops = { + .startup = cygnus_ssp_startup, + .trigger = cygnus_ssp_trigger, + .hw_params = cygnus_ssp_hw_params, + .set_fmt = cygnus_ssp_set_fmt, + .set_sysclk = cygnus_ssp_set_sysclk, + .set_tdm_slot = cygnus_set_dai_tdm_slot, +}; + + +#define INIT_CPU_DAI(num) { \ + .name = "cygnus-ssp" #num, \ + .playback = { \ + .channels_min = 1, \ + .channels_max = 16, \ + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .formats = SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE, \ + }, \ + .capture = { \ + .channels_min = 2, \ + .channels_max = 16, \ + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .formats = SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE, \ + }, \ + .ops = &cygnus_ssp_dai_ops, \ + .suspend = cygnus_ssp_suspend, \ + .resume = cygnus_ssp_resume, \ +} + +static const struct snd_soc_dai_driver cygnus_ssp_dai_info[] = { + INIT_CPU_DAI(0), + INIT_CPU_DAI(1), + INIT_CPU_DAI(2), +}; + +static struct snd_soc_dai_driver cygnus_spdif_dai_info = { + .name = "cygnus-spdif", + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + .ops = &cygnus_ssp_dai_ops, + .suspend = cygnus_ssp_suspend, + .resume = cygnus_ssp_resume, +}; + +static struct snd_soc_dai_driver cygnus_ssp_dai[CYGNUS_MAX_PORTS]; + +static const struct snd_soc_component_driver cygnus_ssp_component = { + .name = "cygnus-audio", +}; + +/* + * Return < 0 if error + * Return 0 if disabled + * Return 1 if enabled and node is parsed successfully + */ +static int parse_ssp_child_node(struct platform_device *pdev, + struct device_node *dn, + struct cygnus_audio *cygaud, + struct snd_soc_dai_driver *p_dai) +{ + struct cygnus_aio_port *aio; + struct cygnus_ssp_regs ssp_regs[3]; + u32 rawval; + int portnum = -1; + enum cygnus_audio_port_type port_type; + + if (of_property_read_u32(dn, "reg", &rawval)) { + dev_err(&pdev->dev, "Missing reg property\n"); + return -EINVAL; + } + + portnum = rawval; + switch (rawval) { + case 0: + ssp_regs[0] = INIT_SSP_REGS(0); + port_type = PORT_TDM; + break; + case 1: + ssp_regs[1] = INIT_SSP_REGS(1); + port_type = PORT_TDM; + break; + case 2: + ssp_regs[2] = INIT_SSP_REGS(2); + port_type = PORT_TDM; + break; + case 3: + port_type = PORT_SPDIF; + break; + default: + dev_err(&pdev->dev, "Bad value for reg %u\n", rawval); + return -EINVAL; + } + + aio = &cygaud->portinfo[portnum]; + aio->cygaud = cygaud; + aio->portnum = portnum; + aio->port_type = port_type; + aio->fsync_width = -1; + + if (port_type == PORT_TDM) { + aio->regs = ssp_regs[portnum]; + + *p_dai = cygnus_ssp_dai_info[portnum]; + aio->mode = CYGNUS_SSPMODE_UNKNOWN; + + } else { /* SPDIF case */ + aio->regs.bf_sourcech_cfg = BF_SRC_CFG3_OFFSET; + aio->regs.bf_sourcech_ctrl = BF_SRC_CTRL3_OFFSET; + aio->regs.i2s_mclk_cfg = SPDIF_MCLK_CFG_OFFSET; + aio->regs.i2s_stream_cfg = SPDIF_STREAM_CFG_OFFSET; + + *p_dai = cygnus_spdif_dai_info; + + /* For the purposes of this code SPDIF can be I2S mode */ + aio->mode = CYGNUS_SSPMODE_I2S; + } + + dev_dbg(&pdev->dev, "%s portnum = %d\n", __func__, aio->portnum); + aio->streams_on = 0; + aio->cygaud->dev = &pdev->dev; + + audio_ssp_init_portregs(aio); + return 0; +} + +static int audio_clk_init(struct platform_device *pdev, + struct cygnus_audio *cygaud) +{ + struct clk *parent; + int error, i, j; + char clk_name[PROP_LEN_MAX]; + + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) { + snprintf(clk_name, PROP_LEN_MAX, "ch%d_audio", i); + + cygaud->audio_clk[i] = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(cygaud->audio_clk[i])) + return PTR_ERR(cygaud->audio_clk[i]); + + error = clk_prepare_enable(cygaud->audio_clk[i]); + if (error) { + dev_err(&pdev->dev, "%s clk_prepare_enable failed %d\n", + __func__, error); + for (j = i; j > 0; j--) + clk_disable_unprepare(cygaud->audio_clk[j-1]); + return error; + } + } + + parent = clk_get_parent(cygaud->audio_clk[0]); + if (IS_ERR(parent)) { + error = PTR_ERR(parent); + goto err_get_parent; + } + + /* Set PLL VCO Frequency (Hz) to default */ + error = clk_set_rate(parent, DEFAULT_VCO); + if (error) { + dev_err(&pdev->dev, + "%s Set PLL VCO rate failed: %d\n", __func__, error); + goto err_get_parent; + } + + cygaud->vco_rate = DEFAULT_VCO; + return 0; + +err_get_parent: + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) + clk_disable_unprepare(cygaud->audio_clk[i]); + return error; +} + +static int audio_clk_exit(struct cygnus_audio *cygaud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) + clk_disable_unprepare(cygaud->audio_clk[i]); + + return 0; +} + +static int cygnus_ssp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child_node; + struct resource *res = pdev->resource; + struct cygnus_audio *cygaud; + int err = -EINVAL; + int node_count; + int active_port_count; + + cygaud = devm_kzalloc(dev, sizeof(struct cygnus_audio), GFP_KERNEL); + if (!cygaud) + return -ENOMEM; + + dev_set_drvdata(dev, cygaud); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aud"); + cygaud->audio = devm_ioremap_resource(dev, res); + if (IS_ERR(cygaud->audio)) + return PTR_ERR(cygaud->audio); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "i2s_in"); + cygaud->i2s_in = devm_ioremap_resource(dev, res); + if (IS_ERR(cygaud->i2s_in)) + return PTR_ERR(cygaud->i2s_in); + + /* Tri-state all controlable pins until we know that we need them */ + writel(CYGNUS_SSP_TRISTATE_MASK, + cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + node_count = of_get_child_count(pdev->dev.of_node); + if ((node_count < 1) || (node_count > CYGNUS_MAX_PORTS)) { + dev_err(dev, "child nodes is %d. Must be between 1 and %d\n", + node_count, CYGNUS_MAX_PORTS); + return -EINVAL; + } + + active_port_count = 0; + for_each_available_child_of_node(pdev->dev.of_node, child_node) { + err = parse_ssp_child_node(pdev, child_node, cygaud, + &cygnus_ssp_dai[active_port_count]); + + /* negative is err, 0 is active and good, 1 is disabled */ + if (err < 0) + return err; + else if (!err) { + dev_dbg(dev, "Activating DAI: %s\n", + cygnus_ssp_dai[active_port_count].name); + active_port_count++; + } + } + + cygaud->dev = dev; + cygaud->active_ports = 0; + + dev_dbg(dev, "Registering %d DAIs\n", active_port_count); + err = snd_soc_register_component(dev, &cygnus_ssp_component, + cygnus_ssp_dai, active_port_count); + if (err) { + dev_err(dev, "snd_soc_register_dai failed\n"); + return err; + } + + cygaud->irq_num = platform_get_irq(pdev, 0); + if (cygaud->irq_num <= 0) { + dev_err(dev, "platform_get_irq failed\n"); + err = cygaud->irq_num; + goto err_irq; + } + + err = audio_clk_init(pdev, cygaud); + if (err) { + dev_err(dev, "audio clock initialization failed\n"); + goto err_irq; + } + + err = cygnus_soc_platform_register(dev, cygaud); + if (err) { + dev_err(dev, "platform reg error %d\n", err); + goto err_platform_reg; + } + + return 0; + +err_platform_reg: + audio_clk_exit(cygaud); +err_irq: + snd_soc_unregister_component(dev); + return err; +} + +static int cygnus_ssp_remove(struct platform_device *pdev) +{ + struct cygnus_audio *cygaud = dev_get_drvdata(&pdev->dev); + + audio_clk_exit(cygaud); + + cygnus_soc_platform_unregister(&pdev->dev); + snd_soc_unregister_component(&pdev->dev); + + return 0; +} + +static const struct of_device_id cygnus_ssp_of_match[] = { + { .compatible = "brcm,cygnus-audio" }, + {}, +}; +MODULE_DEVICE_TABLE(of, cygnus_ssp_of_match); + +static struct platform_driver cygnus_ssp_driver = { + .probe = cygnus_ssp_probe, + .remove = cygnus_ssp_remove, + .driver = { + .name = "cygnus-ssp", + .of_match_table = cygnus_ssp_of_match, + }, +}; + +module_platform_driver(cygnus_ssp_driver); + +MODULE_ALIAS("platform:cygnus-ssp"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Cygnus ASoC SSP Interface"); diff --git a/sound/soc/bcm/cygnus-ssp.h b/sound/soc/bcm/cygnus-ssp.h new file mode 100644 index 0000000..241b81f --- /dev/null +++ b/sound/soc/bcm/cygnus-ssp.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __CYGNUS_SSP_H__ +#define __CYGNUS_SSP_H__ + +#define CYGNUS_TDM_DAI_MAX_SLOTS 16 + +#define CYGNUS_MAX_PLAYBACK_PORTS 4 +#define CYGNUS_MAX_CAPTURE_PORTS 3 +#define CYGNUS_MAX_I2S_PORTS 3 +#define CYGNUS_MAX_PORTS CYGNUS_MAX_PLAYBACK_PORTS +#define CYGNUS_AUIDO_MAX_NUM_CLKS 3 + +#define CYGNUS_SSP_FRAMEBITS_DIV 1 + +#define CYGNUS_SSPMODE_I2S 0 +#define CYGNUS_SSPMODE_TDM 1 +#define CYGNUS_SSPMODE_UNKNOWN -1 + +#define CYGNUS_SSP_CLKSRC_PLL 0 + +/* Max string length of our dt property names */ +#define PROP_LEN_MAX 40 + +struct ringbuf_regs { + unsigned rdaddr; + unsigned wraddr; + unsigned baseaddr; + unsigned endaddr; + unsigned fmark; /* freemark for play, fullmark for caputure */ + unsigned period_bytes; + unsigned buf_size; +}; + +#define RINGBUF_REG_PLAYBACK(num) ((struct ringbuf_regs) { \ + .rdaddr = SRC_RBUF_ ##num## _RDADDR_OFFSET, \ + .wraddr = SRC_RBUF_ ##num## _WRADDR_OFFSET, \ + .baseaddr = SRC_RBUF_ ##num## _BASEADDR_OFFSET, \ + .endaddr = SRC_RBUF_ ##num## _ENDADDR_OFFSET, \ + .fmark = SRC_RBUF_ ##num## _FREE_MARK_OFFSET, \ + .period_bytes = 0, \ + .buf_size = 0, \ +}) + +#define RINGBUF_REG_CAPTURE(num) ((struct ringbuf_regs) { \ + .rdaddr = DST_RBUF_ ##num## _RDADDR_OFFSET, \ + .wraddr = DST_RBUF_ ##num## _WRADDR_OFFSET, \ + .baseaddr = DST_RBUF_ ##num## _BASEADDR_OFFSET, \ + .endaddr = DST_RBUF_ ##num## _ENDADDR_OFFSET, \ + .fmark = DST_RBUF_ ##num## _FULL_MARK_OFFSET, \ + .period_bytes = 0, \ + .buf_size = 0, \ +}) + +enum cygnus_audio_port_type { + PORT_TDM, + PORT_SPDIF, +}; + +struct cygnus_ssp_regs { + u32 i2s_stream_cfg; + u32 i2s_cfg; + u32 i2s_cap_stream_cfg; + u32 i2s_cap_cfg; + u32 i2s_mclk_cfg; + + u32 bf_destch_ctrl; + u32 bf_destch_cfg; + u32 bf_sourcech_ctrl; + u32 bf_sourcech_cfg; + u32 bf_sourcech_grp; +}; + +struct cygnus_aio_port { + int portnum; + int mode; + bool is_slave; + int streams_on; /* will be 0 if both capture and play are off */ + int fsync_width; + int port_type; + + u32 mclk; + u32 lrclk; + u32 bit_per_frame; + + struct cygnus_audio *cygaud; + struct cygnus_ssp_regs regs; + + struct ringbuf_regs play_rb_regs; + struct ringbuf_regs capture_rb_regs; + + struct snd_pcm_substream *play_stream; + struct snd_pcm_substream *capture_stream; +}; + + +struct cygnus_audio { + struct cygnus_aio_port portinfo[CYGNUS_MAX_PORTS]; + + int irq_num; + void __iomem *audio; + struct device *dev; + void __iomem *i2s_in; + + struct clk *audio_clk[CYGNUS_AUIDO_MAX_NUM_CLKS]; + int active_ports; + unsigned long vco_rate; +}; + +extern int cygnus_ssp_get_mode(struct snd_soc_dai *cpu_dai); +extern int cygnus_ssp_add_pll_tweak_controls(struct snd_soc_pcm_runtime *rtd); +extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, + int len); +extern int cygnus_soc_platform_register(struct device *dev, + struct cygnus_audio *cygaud); +extern int cygnus_soc_platform_unregister(struct device *dev); +extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, + int len); +#endif -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: linux-arm-kernel This patch adds Cygnus audio DAI driver. It supports I2S, TDM and SPDIF modes and uses three clocks derived from PLL. This patchset has been tested on Cygnus wireless audio bcm958305K board. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <arunp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- sound/soc/bcm/cygnus-ssp.c | 1508 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/bcm/cygnus-ssp.h | 129 ++++ 2 files changed, 1637 insertions(+) create mode 100644 sound/soc/bcm/cygnus-ssp.c create mode 100644 sound/soc/bcm/cygnus-ssp.h diff --git a/sound/soc/bcm/cygnus-ssp.c b/sound/soc/bcm/cygnus-ssp.c new file mode 100644 index 0000000..f9f321b --- /dev/null +++ b/sound/soc/bcm/cygnus-ssp.c @@ -0,0 +1,1508 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "cygnus-ssp.h" + +#define DEFAULT_VCO 1354750204 + +#define CYGNUS_TDM_RATE \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define CAPTURE_FCI_ID_BASE 0x180 +#define CYGNUS_SSP_TRISTATE_MASK 0x001fff + +/* Used with stream_on field to indicate which streams are active */ +#define PLAYBACK_STREAM_MASK BIT(0) +#define CAPTURE_STREAM_MASK BIT(1) + +#define I2S_STREAM_CFG_MASK 0xff003ff +#define I2S_CAP_STREAM_CFG_MASK 0xf0 +#define SPDIF_STREAM_CFG_MASK 0x3ff +#define CH_GRP_STEREO 0x1 + +/* Begin register offset defines */ +#define AUD_MISC_SEROUT_OE_REG_BASE 0x01c +#define AUD_MISC_SEROUT_SPDIF_OE 13 +#define AUD_MISC_SEROUT_MCLK_OE 3 +#define AUD_MISC_SEROUT_LRCK_OE 2 +#define AUD_MISC_SEROUT_SCLK_OE 1 +#define AUD_MISC_SEROUT_SDAT_OE 0 + +/* AUD_FMM_BF_CTRL_xxx regs */ +#define BF_DST_CFG0_OFFSET 0x100 +#define BF_DST_CFG1_OFFSET 0x104 +#define BF_DST_CFG2_OFFSET 0x108 + +#define BF_DST_CTRL0_OFFSET 0x130 +#define BF_DST_CTRL1_OFFSET 0x134 +#define BF_DST_CTRL2_OFFSET 0x138 + +#define BF_SRC_CFG0_OFFSET 0x148 +#define BF_SRC_CFG1_OFFSET 0x14c +#define BF_SRC_CFG2_OFFSET 0x150 +#define BF_SRC_CFG3_OFFSET 0x154 + +#define BF_SRC_CTRL0_OFFSET 0x1c0 +#define BF_SRC_CTRL1_OFFSET 0x1c4 +#define BF_SRC_CTRL2_OFFSET 0x1c8 +#define BF_SRC_CTRL3_OFFSET 0x1cc + +#define BF_SRC_GRP0_OFFSET 0x1fc +#define BF_SRC_GRP1_OFFSET 0x200 +#define BF_SRC_GRP2_OFFSET 0x204 +#define BF_SRC_GRP3_OFFSET 0x208 + +#define BF_SRC_GRP_EN_OFFSET 0x320 +#define BF_SRC_GRP_FLOWON_OFFSET 0x324 +#define BF_SRC_GRP_SYNC_DIS_OFFSET 0x328 + +/* AUD_FMM_IOP_OUT_I2S_xxx regs */ +#define OUT_I2S_0_STREAM_CFG_OFFSET 0xa00 +#define OUT_I2S_0_CFG_OFFSET 0xa04 +#define OUT_I2S_0_MCLK_CFG_OFFSET 0xa0c + +#define OUT_I2S_1_STREAM_CFG_OFFSET 0xa40 +#define OUT_I2S_1_CFG_OFFSET 0xa44 +#define OUT_I2S_1_MCLK_CFG_OFFSET 0xa4c + +#define OUT_I2S_2_STREAM_CFG_OFFSET 0xa80 +#define OUT_I2S_2_CFG_OFFSET 0xa84 +#define OUT_I2S_2_MCLK_CFG_OFFSET 0xa8c + +/* AUD_FMM_IOP_OUT_SPDIF_xxx regs */ +#define SPDIF_STREAM_CFG_OFFSET 0xac0 +#define SPDIF_CTRL_OFFSET 0xac4 +#define SPDIF_FORMAT_CFG_OFFSET 0xad8 +#define SPDIF_MCLK_CFG_OFFSET 0xadc + +/* AUD_FMM_IOP_PLL_0_xxx regs */ +#define IOP_PLL_0_MACRO_OFFSET 0xb00 +#define IOP_PLL_0_MDIV_Ch0_OFFSET 0xb14 +#define IOP_PLL_0_MDIV_Ch1_OFFSET 0xb18 +#define IOP_PLL_0_MDIV_Ch2_OFFSET 0xb1c + +#define IOP_PLL_0_ACTIVE_MDIV_Ch0_OFFSET 0xb30 +#define IOP_PLL_0_ACTIVE_MDIV_Ch1_OFFSET 0xb34 +#define IOP_PLL_0_ACTIVE_MDIV_Ch2_OFFSET 0xb38 + +/* AUD_FMM_IOP_xxx regs */ +#define IOP_PLL_0_CONTROL_OFFSET 0xb04 +#define IOP_PLL_0_USER_NDIV_OFFSET 0xb08 +#define IOP_PLL_0_ACTIVE_NDIV_OFFSET 0xb20 +#define IOP_PLL_0_RESET_OFFSET 0xb5c + +/* AUD_FMM_IOP_IN_I2S_xxx regs */ +#define IN_I2S_0_STREAM_CFG_OFFSET 0x00 +#define IN_I2S_0_CFG_OFFSET 0x04 +#define IN_I2S_1_STREAM_CFG_OFFSET 0x40 +#define IN_I2S_1_CFG_OFFSET 0x44 +#define IN_I2S_2_STREAM_CFG_OFFSET 0x80 +#define IN_I2S_2_CFG_OFFSET 0x84 + +/* AUD_FMM_IOP_MISC_xxx regs */ +#define IOP_SW_INIT_LOGIC 0x1c0 + +/* End register offset defines */ + + +/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_0_REG */ +#define I2S_OUT_MCLKRATE_SHIFT 16 + +/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_REG */ +#define I2S_OUT_PLLCLKSEL_SHIFT 0 + +/* AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG */ +#define I2S_OUT_STREAM_ENA 31 +#define I2S_OUT_STREAM_CFG_GROUP_ID 20 +#define I2S_OUT_STREAM_CFG_CHANNEL_GROUPING 24 + +/* AUD_FMM_IOP_IN_I2S_x_CAP */ +#define I2S_IN_STREAM_CFG_CAP_ENA 31 +#define I2S_IN_STREAM_CFG_0_GROUP_ID 4 + +/* AUD_FMM_IOP_OUT_I2S_x_I2S_CFG_REG */ +#define I2S_OUT_CFGX_CLK_ENA 0 +#define I2S_OUT_CFGX_DATA_ENABLE 1 +#define I2S_OUT_CFGX_DATA_ALIGNMENT 6 +#define I2S_OUT_CFGX_BITS_PER_SLOT 13 +#define I2S_OUT_CFGX_VALID_SLOT 14 +#define I2S_OUT_CFGX_FSYNC_WIDTH 18 +#define I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32 26 +#define I2S_OUT_CFGX_SLAVE_MODE 30 +#define I2S_OUT_CFGX_TDM_MODE 31 + +/* AUD_FMM_BF_CTRL_SOURCECH_CFGx_REG */ +#define BF_SRC_CFGX_SFIFO_ENA 0 +#define BF_SRC_CFGX_BUFFER_PAIR_ENABLE 1 +#define BF_SRC_CFGX_SAMPLE_CH_MODE 2 +#define BF_SRC_CFGX_SFIFO_SZ_DOUBLE 5 +#define BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY 10 +#define BF_SRC_CFGX_BIT_RES 20 +#define BF_SRC_CFGX_PROCESS_SEQ_ID_VALID 31 + +/* AUD_FMM_BF_CTRL_DESTCH_CFGx_REG */ +#define BF_DST_CFGX_CAP_ENA 0 +#define BF_DST_CFGX_BUFFER_PAIR_ENABLE 1 +#define BF_DST_CFGX_DFIFO_SZ_DOUBLE 2 +#define BF_DST_CFGX_NOT_PAUSE_WHEN_FULL 11 +#define BF_DST_CFGX_FCI_ID 12 +#define BF_DST_CFGX_CAP_MODE 24 +#define BF_DST_CFGX_PROC_SEQ_ID_VALID 31 + +/* AUD_FMM_IOP_OUT_SPDIF_xxx */ +#define SPDIF_0_OUT_DITHER_ENA 3 +#define SPDIF_0_OUT_STREAM_ENA 31 + +/* AUD_FMM_IOP_PLL_0_USER */ +#define IOP_PLL_0_USER_NDIV_FRAC 10 + +/* AUD_FMM_IOP_PLL_0_ACTIVE */ +#define IOP_PLL_0_ACTIVE_NDIV_FRAC 10 + + +#define INIT_SSP_REGS(num) (struct cygnus_ssp_regs){ \ + .i2s_stream_cfg = OUT_I2S_ ##num## _STREAM_CFG_OFFSET, \ + .i2s_cap_stream_cfg = IN_I2S_ ##num## _STREAM_CFG_OFFSET, \ + .i2s_cfg = OUT_I2S_ ##num## _CFG_OFFSET, \ + .i2s_cap_cfg = IN_I2S_ ##num## _CFG_OFFSET, \ + .i2s_mclk_cfg = OUT_I2S_ ##num## _MCLK_CFG_OFFSET, \ + .bf_destch_ctrl = BF_DST_CTRL ##num## _OFFSET, \ + .bf_destch_cfg = BF_DST_CFG ##num## _OFFSET, \ + .bf_sourcech_ctrl = BF_SRC_CTRL ##num## _OFFSET, \ + .bf_sourcech_cfg = BF_SRC_CFG ##num## _OFFSET, \ + .bf_sourcech_grp = BF_SRC_GRP ##num## _OFFSET \ +} + +struct pll_macro_entry { + u32 mclk; + u32 pll_ch_num; + unsigned long vco_rate; +}; + +/* + * PLL has 3 output channels (1x, 2x, and 4x). Below are + * the common MCLK frequencies used by audio driver + */ +static const struct pll_macro_entry pll_predef_mclk[] = { + { 4096000, 0, 1769470191UL}, + { 8192000, 1, 1769470191UL}, + {16384000, 2, 1769470191UL}, + + { 5644800, 0, 1354750204UL}, + {11289600, 1, 1354750204UL}, + {22579200, 2, 1354750204UL}, + + { 6144000, 0, 1769470191UL}, + {12288000, 1, 1769470191UL}, + {24576000, 2, 1769470191UL}, + + {12288000, 0, 1769470191UL}, + {24576000, 1, 1769470191UL}, + {49152000, 2, 1769470191UL}, + + {22579200, 0, 1354750204UL}, + {45158400, 1, 1354750204UL}, + {90316800, 2, 1354750204UL}, + + {24576000, 0, 1769470191UL}, + {49152000, 1, 1769470191UL}, + {98304000, 2, 1769470191UL}, +}; + +/* List of valid frame sizes for tdm mode */ +static const int ssp_valid_tdm_framesize[] = {32, 64, 128, 256, 512}; + +/* + * Use this relationship to derive the sampling rate (lrclk) + * lrclk = (mclk) / ((2*mclk_to_sclk_ratio) * (32 * SCLK))). + * + * Use mclk and pll_ch from the table above + * + * Valid SCLK = 0/1/2/4/8/12 + * + * mclk_to_sclk_ratio = number of MCLK per SCLK. Division is twice the + * value programmed in this field. + * Valid mclk_to_sclk_ratio = 1 through to 15 + * + * eg: To set lrclk = 48khz, set mclk = 12288000, mclk_to_sclk_ratio = 2, + * SCLK = 64 + */ +struct _ssp_clk_coeff { + u32 mclk; + u32 sclk_rate; + u32 rate; + u32 mclk_rate; +}; + +static const struct _ssp_clk_coeff ssp_clk_coeff[] = { + { 4096000, 32, 16000, 4}, + { 4096000, 32, 32000, 2}, + { 4096000, 64, 8000, 4}, + { 4096000, 64, 16000, 2}, + { 4096000, 64, 32000, 1}, + { 4096000, 128, 8000, 2}, + { 4096000, 128, 16000, 1}, + { 4096000, 256, 8000, 1}, + + { 6144000, 32, 16000, 6}, + { 6144000, 32, 32000, 3}, + { 6144000, 32, 48000, 2}, + { 6144000, 32, 96000, 1}, + { 6144000, 64, 8000, 6}, + { 6144000, 64, 16000, 3}, + { 6144000, 64, 48000, 1}, + { 6144000, 128, 8000, 3}, + + { 8192000, 32, 32000, 4}, + { 8192000, 64, 16000, 4}, + { 8192000, 64, 32000, 2}, + { 8192000, 128, 8000, 4}, + { 8192000, 128, 16000, 2}, + { 8192000, 128, 32000, 1}, + { 8192000, 256, 8000, 2}, + { 8192000, 256, 16000, 1}, + { 8192000, 512, 8000, 1}, + + {12288000, 32, 32000, 6}, + {12288000, 32, 48000, 4}, + {12288000, 32, 96000, 2}, + {12288000, 32, 192000, 1}, + {12288000, 64, 16000, 6}, + {12288000, 64, 32000, 3}, + {12288000, 64, 48000, 2}, + {12288000, 64, 96000, 1}, + {12288000, 128, 8000, 6}, + {12288000, 128, 16000, 3}, + {12288000, 128, 48000, 1}, + {12288000, 256, 8000, 3}, + + {16384000, 64, 32000, 4}, + {16384000, 128, 16000, 4}, + {16384000, 128, 32000, 2}, + {16384000, 256, 8000, 4}, + {16384000, 256, 16000, 2}, + {16384000, 256, 32000, 1}, + {16384000, 512, 8000, 2}, + {16384000, 512, 16000, 1}, + + {24576000, 32, 96000, 4}, + {24576000, 32, 192000, 2}, + {24576000, 64, 32000, 6}, + {24576000, 64, 48000, 4}, + {24576000, 64, 96000, 2}, + {24576000, 64, 192000, 1}, + {24576000, 128, 16000, 6}, + {24576000, 128, 32000, 3}, + {24576000, 128, 48000, 2}, + {24576000, 256, 8000, 6}, + {24576000, 256, 16000, 3}, + {24576000, 256, 48000, 1}, + {24576000, 512, 8000, 3}, + + {49152000, 32, 192000, 4}, + {49152000, 64, 96000, 4}, + {49152000, 64, 192000, 2}, + {49152000, 128, 32000, 6}, + {49152000, 128, 48000, 4}, + {49152000, 128, 96000, 2}, + {49152000, 128, 192000, 1}, + {49152000, 256, 16000, 6}, + {49152000, 256, 32000, 3}, + {49152000, 256, 48000, 2}, + {49152000, 256, 96000, 1}, + {49152000, 512, 8000, 6}, + {49152000, 512, 16000, 3}, + {49152000, 512, 48000, 1}, + + { 5644800, 32, 22050, 4}, + { 5644800, 32, 44100, 2}, + { 5644800, 32, 88200, 1}, + { 5644800, 64, 11025, 4}, + { 5644800, 64, 22050, 2}, + { 5644800, 64, 44100, 1}, + + {11289600, 32, 44100, 4}, + {11289600, 32, 88200, 2}, + {11289600, 32, 176400, 1}, + {11289600, 64, 22050, 4}, + {11289600, 64, 44100, 2}, + {11289600, 64, 88200, 1}, + {11289600, 128, 11025, 4}, + {11289600, 128, 22050, 2}, + {11289600, 128, 44100, 1}, + + {22579200, 32, 88200, 4}, + {22579200, 32, 176400, 2}, + {22579200, 64, 44100, 4}, + {22579200, 64, 88200, 2}, + {22579200, 64, 176400, 1}, + {22579200, 128, 22050, 4}, + {22579200, 128, 44100, 2}, + {22579200, 128, 88200, 1}, + {22579200, 256, 11025, 4}, + {22579200, 256, 22050, 2}, + {22579200, 256, 44100, 1}, + + {45158400, 32, 176400, 4}, + {45158400, 64, 88200, 4}, + {45158400, 64, 176400, 2}, + {45158400, 128, 44100, 4}, + {45158400, 128, 88200, 2}, + {45158400, 128, 176400, 1}, + {45158400, 256, 22050, 4}, + {45158400, 256, 44100, 2}, + {45158400, 256, 88200, 1}, + {45158400, 512, 11025, 4}, + {45158400, 512, 22050, 2}, + {45158400, 512, 44100, 1}, +}; + +static struct cygnus_aio_port *cygnus_dai_get_portinfo(struct snd_soc_dai *dai) +{ + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + return &cygaud->portinfo[dai->id]; +} + +static int audio_ssp_init_portregs(struct cygnus_aio_port *aio) +{ + u32 value, fci_id; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value &= ~I2S_STREAM_CFG_MASK; + + /* Set Group ID */ + writel(aio->portnum, aio->cygaud->audio + + aio->regs.bf_sourcech_grp); + + /* Configure the AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG reg */ + value |= aio->portnum << I2S_OUT_STREAM_CFG_GROUP_ID; + value |= aio->portnum; /* FCI ID is the port num */ + value |= CH_GRP_STEREO << I2S_OUT_STREAM_CFG_CHANNEL_GROUPING; + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + /* Configure the AUD_FMM_BF_CTRL_SOURCECH_CFGX reg */ + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY); + value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE); + value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* Configure the AUD_FMM_IOP_IN_I2S_x_CAP_STREAM_CFG_0 reg */ + value = readl(aio->cygaud->i2s_in + + aio->regs.i2s_cap_stream_cfg); + value &= ~I2S_CAP_STREAM_CFG_MASK; + value |= aio->portnum << I2S_IN_STREAM_CFG_0_GROUP_ID; + writel(value, aio->cygaud->i2s_in + + aio->regs.i2s_cap_stream_cfg); + + /* Configure the AUD_FMM_BF_CTRL_DESTCH_CFGX_REG_BASE reg */ + fci_id = CAPTURE_FCI_ID_BASE + aio->portnum; + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_DFIFO_SZ_DOUBLE); + value &= ~BIT(BF_DST_CFGX_NOT_PAUSE_WHEN_FULL); + value |= (fci_id << BF_DST_CFGX_FCI_ID); + value |= BIT(BF_DST_CFGX_PROC_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); + + /* Enable the transmit pin for this port */ + value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + value &= ~BIT((aio->portnum * 4) + AUD_MISC_SEROUT_SDAT_OE); + writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + break; + case PORT_SPDIF: + writel(aio->portnum, aio->cygaud->audio + BF_SRC_GRP3_OFFSET); + + value = readl(aio->cygaud->audio + SPDIF_CTRL_OFFSET); + value |= BIT(SPDIF_0_OUT_DITHER_ENA); + writel(value, aio->cygaud->audio + SPDIF_CTRL_OFFSET); + + /* Enable and set the FCI ID for the SPDIF channel */ + value = readl(aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET); + value &= ~SPDIF_STREAM_CFG_MASK; + value |= aio->portnum; /* FCI ID is the port num */ + value |= BIT(SPDIF_0_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY); + value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE); + value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* Enable the spdif output pin */ + value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + value &= ~BIT(AUD_MISC_SEROUT_SPDIF_OE); + writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + break; + default: + dev_err(aio->cygaud->dev, "Port not supported\n"); + status = -EINVAL; + } + + return status; +} + +static void audio_ssp_in_enable(struct cygnus_aio_port *aio) +{ + u32 value; + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_CAP_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); + + writel(0x1, aio->cygaud->audio + aio->regs.bf_destch_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value |= BIT(I2S_OUT_CFGX_CLK_ENA); + value |= BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + value |= BIT(I2S_IN_STREAM_CFG_CAP_ENA); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + + aio->streams_on |= CAPTURE_STREAM_MASK; +} + +static void audio_ssp_in_disable(struct cygnus_aio_port *aio) +{ + u32 value; + + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + value &= ~BIT(I2S_IN_STREAM_CFG_CAP_ENA); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg); + + aio->streams_on &= ~CAPTURE_STREAM_MASK; + + /* If both playback and capture are off */ + if (!aio->streams_on) { + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~BIT(I2S_OUT_CFGX_CLK_ENA); + value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + } + + writel(0x0, aio->cygaud->audio + aio->regs.bf_destch_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg); + value &= ~BIT(BF_DST_CFGX_CAP_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg); +} + +static int audio_ssp_out_enable(struct cygnus_aio_port *aio) +{ + u32 value; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value |= BIT(I2S_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value |= BIT(I2S_OUT_CFGX_CLK_ENA); + value |= BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + aio->streams_on |= PLAYBACK_STREAM_MASK; + break; + case PORT_SPDIF: + value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + value |= 0x3; + writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + + writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + break; + default: + dev_err(aio->cygaud->dev, + "Port not supported %d\n", aio->portnum); + status = -EINVAL; + } + + return status; +} + +static int audio_ssp_out_disable(struct cygnus_aio_port *aio) +{ + u32 value; + int status = 0; + + switch (aio->port_type) { + case PORT_TDM: + aio->streams_on &= ~PLAYBACK_STREAM_MASK; + + /* If both playback and capture are off */ + if (!aio->streams_on) { + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~BIT(I2S_OUT_CFGX_CLK_ENA); + value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE); + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + } + + /* set group_sync_dis = 1 */ + value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + value |= BIT(aio->portnum); + writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + + writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + /* set group_sync_dis = 0 */ + value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + value &= ~BIT(aio->portnum); + writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET); + + value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg); + value &= ~BIT(I2S_OUT_STREAM_ENA); + writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg); + + /* IOP SW INIT on OUT_I2S_x */ + value = readl(aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + value |= BIT(aio->portnum); + writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + value &= ~BIT(aio->portnum); + writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC); + break; + case PORT_SPDIF: + value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + value &= ~0x3; + writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET); + writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl); + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + break; + default: + dev_err(aio->cygaud->dev, + "Port not supported %d\n", aio->portnum); + status = -EINVAL; + } + + return status; +} + +static int configure_vco(struct cygnus_audio *cygaud, + unsigned long vco_rate) +{ + struct clk *parent; + int error; + + if (vco_rate == cygaud->vco_rate) + return 0; + + /* Change PLL rate only if none of the ports are active */ + if (!cygaud->active_ports) { + parent = clk_get_parent(cygaud->audio_clk[0]); + if (IS_ERR(parent)) + return PTR_ERR(parent); + + /* Set PLL VCO Frequency (Hz) */ + error = clk_set_rate(parent, vco_rate); + if (error) { + dev_err(cygaud->dev, "%s Set PLL VCO rate failed: %d\n", + __func__, error); + return error; + } + cygaud->vco_rate = vco_rate; + } else { + dev_err(cygaud->dev, "%s Cannot change VCO Freq\n", + __func__); + return -EINVAL; + } + + return 0; +} + +static int pll_configure_mclk(struct cygnus_audio *cygaud, u32 mclk, + struct device *dev) +{ + int i = 0, error; + bool found = false; + const struct pll_macro_entry *p_entry; + struct clk *ch_clk; + unsigned long vco_rate = 0; + + for (i = 0; i < ARRAY_SIZE(pll_predef_mclk); i++) { + p_entry = &pll_predef_mclk[i]; + + if (p_entry->mclk == mclk) { + found = true; + vco_rate = p_entry->vco_rate; + break; + } + } + if (!found) { + dev_err(dev, + "%s No valid mclk freq (%u) found!\n", __func__, mclk); + return -EINVAL; + } + + error = configure_vco(cygaud, vco_rate); + if (error) + return error; + + ch_clk = cygaud->audio_clk[p_entry->pll_ch_num]; + + error = clk_set_rate(ch_clk, mclk); + if (error) { + dev_err(dev, "%s Set MCLK rate failed: %d\n", __func__, error); + return error; + } + return p_entry->pll_ch_num; +} + +static int cygnus_ssp_set_clocks(struct cygnus_aio_port *aio, + struct cygnus_audio *cygaud) +{ + u32 value, i = 0; + u32 mask = 0xf; + u32 sclk; + bool found = false; + const struct _ssp_clk_coeff *p_entry = NULL; + + if ((!aio->lrclk) || (!aio->bit_per_frame)) { + dev_err(aio->cygaud->dev, "First set up port through hw_params()\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(ssp_clk_coeff); i++) { + p_entry = &ssp_clk_coeff[i]; + if ((p_entry->rate == aio->lrclk) && + (p_entry->sclk_rate == aio->bit_per_frame) && + (p_entry->mclk == aio->mclk)) { + found = true; + break; + } + } + if (!found) { + dev_err(aio->cygaud->dev, + "No valid match found in ssp_clk_coeff array\n"); + dev_err(aio->cygaud->dev, "lrclk = %u, bits/frame = %u, mclk = %u\n", + aio->lrclk, aio->bit_per_frame, aio->mclk); + return -EINVAL; + } + + sclk = aio->bit_per_frame; + if (sclk == 512) + sclk = 0; + /* sclks_per_1fs_div = sclk cycles/32 */ + sclk /= 32; + /* Set sclk rate */ + if (aio->port_type == PORT_TDM) { + /* Set number of bitclks per frame */ + value = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + value &= ~(mask << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32); + value |= sclk << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32; + writel(value, aio->cygaud->audio + aio->regs.i2s_cfg); + dev_dbg(aio->cygaud->dev, + "SCLKS_PER_1FS_DIV32 = 0x%x\n", value); + } + + /* Set MCLK_RATE ssp port (spdif and ssp are the same) */ + value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + value &= ~(0xf << I2S_OUT_MCLKRATE_SHIFT); + value |= (p_entry->mclk_rate << I2S_OUT_MCLKRATE_SHIFT); + writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + + dev_dbg(aio->cygaud->dev, "mclk cfg reg = 0x%x\n", value); + dev_dbg(aio->cygaud->dev, "bits per frame = %u, mclk = %u Hz, lrclk = %u Hz\n", + aio->bit_per_frame, aio->mclk, aio->lrclk); + return 0; +} + +static int cygnus_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + int rate, bitres; + u32 value; + u32 mask = 0x1f; + int ret = 0; + + dev_dbg(aio->cygaud->dev, "%s port = %d\n", __func__, aio->portnum); + dev_dbg(aio->cygaud->dev, "params_channels %d\n", + params_channels(params)); + dev_dbg(aio->cygaud->dev, "rate %d\n", params_rate(params)); + dev_dbg(aio->cygaud->dev, "format %d\n", params_format(params)); + + rate = params_rate(params); + + switch (aio->mode) { + case CYGNUS_SSPMODE_TDM: + if ((rate == 192000) && (params_channels(params) > 4)) { + dev_err(aio->cygaud->dev, "Cannot run %d channels at %dHz\n", + params_channels(params), rate); + return -EINVAL; + } + break; + case CYGNUS_SSPMODE_I2S: + aio->bit_per_frame = 64; /* I2S must be 64 bit per frame */ + break; + default: + dev_err(aio->cygaud->dev, + "%s port running in unknown mode\n", __func__); + return -EINVAL; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Configure channels as mono or stereo */ + if (params_channels(params) == 1) { + value = readl(aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + value |= BIT(BF_SRC_CFGX_SAMPLE_CH_MODE); + value &= ~BIT(BF_SRC_CFGX_BUFFER_PAIR_ENABLE); + writel(value, aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + } else { + value = readl(aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + value &= ~BIT(BF_SRC_CFGX_SAMPLE_CH_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_sourcech_cfg); + } + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bitres = 8; + break; + + case SNDRV_PCM_FORMAT_S16_LE: + bitres = 16; + break; + + case SNDRV_PCM_FORMAT_S32_LE: + case SNDRV_PCM_FORMAT_S24_LE: + /* 32 bit mode is coded as 0 */ + bitres = 0; + break; + + default: + return -EINVAL; + } + + value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + value &= ~(mask << BF_SRC_CFGX_BIT_RES); + value |= (bitres << BF_SRC_CFGX_BIT_RES); + writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg); + + } else { + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + value = readl(aio->cygaud->audio + + aio->regs.bf_destch_cfg); + value |= BIT(BF_DST_CFGX_CAP_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_destch_cfg); + break; + + case SNDRV_PCM_FORMAT_S32_LE: + case SNDRV_PCM_FORMAT_S24_LE: + value = readl(aio->cygaud->audio + + aio->regs.bf_destch_cfg); + value &= ~BIT(BF_DST_CFGX_CAP_MODE); + writel(value, aio->cygaud->audio + + aio->regs.bf_destch_cfg); + break; + + default: + return -EINVAL; + } + } + + aio->lrclk = rate; + + if (!aio->is_slave) + ret = cygnus_ssp_set_clocks(aio, cygaud); + + return ret; +} + +/* + * This function sets the mclk frequency for pll clock + */ +static int cygnus_ssp_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + int sel; + u32 value; + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + dev_dbg(aio->cygaud->dev, + "%s Enter port = %d\n", __func__, aio->portnum); + sel = pll_configure_mclk(cygaud, freq, aio->cygaud->dev); + if (sel < 0) { + dev_err(aio->cygaud->dev, + "%s Setting mclk failed.\n", __func__); + return -EINVAL; + } + + aio->mclk = freq; + + dev_dbg(aio->cygaud->dev, "%s Setting MCLKSEL to %d\n", __func__, sel); + value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + value &= ~(0xf << I2S_OUT_PLLCLKSEL_SHIFT); + value |= (sel << I2S_OUT_PLLCLKSEL_SHIFT); + writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg); + + return 0; +} + +static int cygnus_ssp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + + snd_soc_dai_set_dma_data(dai, substream, aio); + + return 0; +} + +/* + * Bit Update Notes + * 31 Yes TDM Mode (1 = TDM, 0 = i2s) + * 30 Yes Slave Mode (1 = Slave, 0 = Master) + * 29:26 No Sclks per frame + * 25:18 Yes FS Width + * 17:14 No Valid Slots + * 13 No Bits (1 = 16 bits, 0 = 32 bits) + * 12:08 No Bits per samp + * 07 Yes Justifcation (1 = LSB, 0 = MSB) + * 06 Yes Alignment (1 = Delay 1 clk, 0 = no delay + * 05 Yes SCLK polarity (1 = Rising, 0 = Falling) + * 04 Yes LRCLK Polarity (1 = High for left, 0 = Low for left) + * 03:02 Yes Reserved - write as zero + * 01 No Data Enable + * 00 No CLK Enable + */ +#define I2S_OUT_CFG_REG_UPDATE_MASK 0x3C03FF03 + +/* Input cfg is same as output, but the FS width is not a valid field */ +#define I2S_IN_CFG_REG_UPDATE_MASK (I2S_OUT_CFG_REG_UPDATE_MASK | 0x03FC0000) + +int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, int len) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + + if ((len > 0) && (len < 256)) { + aio->fsync_width = len; + return 0; + } else { + return -EINVAL; + } +} + +static int cygnus_ssp_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + u32 ssp_curcfg; + u32 ssp_newcfg; + u32 ssp_outcfg; + u32 ssp_incfg; + u32 val; + u32 mask; + + dev_dbg(aio->cygaud->dev, "%s Enter fmt: %x\n", __func__, fmt); + + if (aio->port_type == PORT_SPDIF) + return -EINVAL; + + ssp_newcfg = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ssp_newcfg |= BIT(I2S_OUT_CFGX_SLAVE_MODE); + aio->is_slave = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + ssp_newcfg &= ~BIT(I2S_OUT_CFGX_SLAVE_MODE); + aio->is_slave = 0; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT); + ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH); + aio->mode = CYGNUS_SSPMODE_I2S; + break; + + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + ssp_newcfg |= BIT(I2S_OUT_CFGX_TDM_MODE); + + /* DSP_A = data after FS, DSP_B = data during FS */ + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_DSP_A) + ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT); + + if ((aio->fsync_width > 0) && (aio->fsync_width < 256)) + ssp_newcfg |= + (aio->fsync_width << I2S_OUT_CFGX_FSYNC_WIDTH); + else + ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH); + + aio->mode = CYGNUS_SSPMODE_TDM; + break; + + default: + return -EINVAL; + } + + /* + * SSP out cfg. + * Retain bits we do not want to update, then OR in new bits + */ + ssp_curcfg = readl(aio->cygaud->audio + aio->regs.i2s_cfg); + ssp_outcfg = (ssp_curcfg & I2S_OUT_CFG_REG_UPDATE_MASK) | ssp_newcfg; + writel(ssp_outcfg, aio->cygaud->audio + aio->regs.i2s_cfg); + + /* + * SSP in cfg. + * Retain bits we do not want to update, then OR in new bits + */ + ssp_curcfg = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + ssp_incfg = (ssp_curcfg & I2S_IN_CFG_REG_UPDATE_MASK) | ssp_newcfg; + writel(ssp_incfg, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + + val = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + /* + * Configure the word clk and bit clk as output or tristate + * Each port has 4 bits for controlling its pins. + * Shift the mask based upon port number. + */ + mask = BIT(AUD_MISC_SEROUT_LRCK_OE) + | BIT(AUD_MISC_SEROUT_SCLK_OE) + | BIT(AUD_MISC_SEROUT_MCLK_OE); + mask = mask << (aio->portnum * 4); + if (aio->is_slave) + /* Set bit for tri-state */ + val |= mask; + else + /* Clear bit for drive */ + val &= ~mask; + + dev_dbg(aio->cygaud->dev, "%s Set OE bits 0x%x\n", __func__, val); + writel(val, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + return 0; +} + +static int cygnus_ssp_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai); + + dev_dbg(aio->cygaud->dev, + "%s cmd %d at port = %d\n", __func__, cmd, aio->portnum); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + audio_ssp_out_enable(aio); + else + audio_ssp_in_enable(aio); + cygaud->active_ports++; + + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + audio_ssp_out_disable(aio); + else + audio_ssp_in_disable(aio); + cygaud->active_ports--; + + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int cygnus_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + u32 value; + int bits_per_slot = 0; /* default to 32-bits per slot */ + int frame_bits; + unsigned int active_slots; + bool found = false; + int i; + + if (tx_mask != rx_mask) { + dev_err(aio->cygaud->dev, + "%s tx_mask must equal rx_mask\n", __func__); + return -EINVAL; + } + + active_slots = hweight32(tx_mask); + + if ((active_slots < 0) || (active_slots > 16)) + return -EINVAL; + + /* Slot value must be even */ + if (active_slots % 2) + return -EINVAL; + + /* We encode 16 slots as 0 in the reg */ + if (active_slots == 16) + active_slots = 0; + + /* Slot Width is either 16 or 32 */ + switch (slot_width) { + case 16: + bits_per_slot = 1; + break; + case 32: + bits_per_slot = 0; + break; + default: + bits_per_slot = 0; + dev_warn(aio->cygaud->dev, + "%s Defaulting Slot Width to 32\n", __func__); + } + + frame_bits = slots * slot_width; + + for (i = 0; i < ARRAY_SIZE(ssp_valid_tdm_framesize); i++) { + if (ssp_valid_tdm_framesize[i] == frame_bits) { + found = true; + break; + } + } + + if (!found) { + dev_err(aio->cygaud->dev, + "%s In TDM mode, frame bits INVALID (%d)\n", + __func__, frame_bits); + return -EINVAL; + } + + aio->bit_per_frame = frame_bits; + + dev_dbg(aio->cygaud->dev, "%s active_slots %u, bits per frame %d\n", + __func__, active_slots, frame_bits); + + /* Set capture side of ssp port */ + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT); + value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT); + value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT); + value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg); + + /* Set playback side of ssp port */ + value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cfg); + value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT); + value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT); + value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT); + value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT); + writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cfg); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) +{ + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); + + audio_ssp_out_disable(aio); + audio_ssp_in_disable(aio); + if (cygaud->active_ports > 0) + cygaud->active_ports--; + + return 0; +} + +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) +{ + return 0; +} +#else +#define cygnus_ssp_suspend NULL +#define cygnus_ssp_resume NULL +#endif + +static const struct snd_soc_dai_ops cygnus_ssp_dai_ops = { + .startup = cygnus_ssp_startup, + .trigger = cygnus_ssp_trigger, + .hw_params = cygnus_ssp_hw_params, + .set_fmt = cygnus_ssp_set_fmt, + .set_sysclk = cygnus_ssp_set_sysclk, + .set_tdm_slot = cygnus_set_dai_tdm_slot, +}; + + +#define INIT_CPU_DAI(num) { \ + .name = "cygnus-ssp" #num, \ + .playback = { \ + .channels_min = 1, \ + .channels_max = 16, \ + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .formats = SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE, \ + }, \ + .capture = { \ + .channels_min = 2, \ + .channels_max = 16, \ + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .formats = SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE, \ + }, \ + .ops = &cygnus_ssp_dai_ops, \ + .suspend = cygnus_ssp_suspend, \ + .resume = cygnus_ssp_resume, \ +} + +static const struct snd_soc_dai_driver cygnus_ssp_dai_info[] = { + INIT_CPU_DAI(0), + INIT_CPU_DAI(1), + INIT_CPU_DAI(2), +}; + +static struct snd_soc_dai_driver cygnus_spdif_dai_info = { + .name = "cygnus-spdif", + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = CYGNUS_TDM_RATE | SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + .ops = &cygnus_ssp_dai_ops, + .suspend = cygnus_ssp_suspend, + .resume = cygnus_ssp_resume, +}; + +static struct snd_soc_dai_driver cygnus_ssp_dai[CYGNUS_MAX_PORTS]; + +static const struct snd_soc_component_driver cygnus_ssp_component = { + .name = "cygnus-audio", +}; + +/* + * Return < 0 if error + * Return 0 if disabled + * Return 1 if enabled and node is parsed successfully + */ +static int parse_ssp_child_node(struct platform_device *pdev, + struct device_node *dn, + struct cygnus_audio *cygaud, + struct snd_soc_dai_driver *p_dai) +{ + struct cygnus_aio_port *aio; + struct cygnus_ssp_regs ssp_regs[3]; + u32 rawval; + int portnum = -1; + enum cygnus_audio_port_type port_type; + + if (of_property_read_u32(dn, "reg", &rawval)) { + dev_err(&pdev->dev, "Missing reg property\n"); + return -EINVAL; + } + + portnum = rawval; + switch (rawval) { + case 0: + ssp_regs[0] = INIT_SSP_REGS(0); + port_type = PORT_TDM; + break; + case 1: + ssp_regs[1] = INIT_SSP_REGS(1); + port_type = PORT_TDM; + break; + case 2: + ssp_regs[2] = INIT_SSP_REGS(2); + port_type = PORT_TDM; + break; + case 3: + port_type = PORT_SPDIF; + break; + default: + dev_err(&pdev->dev, "Bad value for reg %u\n", rawval); + return -EINVAL; + } + + aio = &cygaud->portinfo[portnum]; + aio->cygaud = cygaud; + aio->portnum = portnum; + aio->port_type = port_type; + aio->fsync_width = -1; + + if (port_type == PORT_TDM) { + aio->regs = ssp_regs[portnum]; + + *p_dai = cygnus_ssp_dai_info[portnum]; + aio->mode = CYGNUS_SSPMODE_UNKNOWN; + + } else { /* SPDIF case */ + aio->regs.bf_sourcech_cfg = BF_SRC_CFG3_OFFSET; + aio->regs.bf_sourcech_ctrl = BF_SRC_CTRL3_OFFSET; + aio->regs.i2s_mclk_cfg = SPDIF_MCLK_CFG_OFFSET; + aio->regs.i2s_stream_cfg = SPDIF_STREAM_CFG_OFFSET; + + *p_dai = cygnus_spdif_dai_info; + + /* For the purposes of this code SPDIF can be I2S mode */ + aio->mode = CYGNUS_SSPMODE_I2S; + } + + dev_dbg(&pdev->dev, "%s portnum = %d\n", __func__, aio->portnum); + aio->streams_on = 0; + aio->cygaud->dev = &pdev->dev; + + audio_ssp_init_portregs(aio); + return 0; +} + +static int audio_clk_init(struct platform_device *pdev, + struct cygnus_audio *cygaud) +{ + struct clk *parent; + int error, i, j; + char clk_name[PROP_LEN_MAX]; + + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) { + snprintf(clk_name, PROP_LEN_MAX, "ch%d_audio", i); + + cygaud->audio_clk[i] = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(cygaud->audio_clk[i])) + return PTR_ERR(cygaud->audio_clk[i]); + + error = clk_prepare_enable(cygaud->audio_clk[i]); + if (error) { + dev_err(&pdev->dev, "%s clk_prepare_enable failed %d\n", + __func__, error); + for (j = i; j > 0; j--) + clk_disable_unprepare(cygaud->audio_clk[j-1]); + return error; + } + } + + parent = clk_get_parent(cygaud->audio_clk[0]); + if (IS_ERR(parent)) { + error = PTR_ERR(parent); + goto err_get_parent; + } + + /* Set PLL VCO Frequency (Hz) to default */ + error = clk_set_rate(parent, DEFAULT_VCO); + if (error) { + dev_err(&pdev->dev, + "%s Set PLL VCO rate failed: %d\n", __func__, error); + goto err_get_parent; + } + + cygaud->vco_rate = DEFAULT_VCO; + return 0; + +err_get_parent: + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) + clk_disable_unprepare(cygaud->audio_clk[i]); + return error; +} + +static int audio_clk_exit(struct cygnus_audio *cygaud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) + clk_disable_unprepare(cygaud->audio_clk[i]); + + return 0; +} + +static int cygnus_ssp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child_node; + struct resource *res = pdev->resource; + struct cygnus_audio *cygaud; + int err = -EINVAL; + int node_count; + int active_port_count; + + cygaud = devm_kzalloc(dev, sizeof(struct cygnus_audio), GFP_KERNEL); + if (!cygaud) + return -ENOMEM; + + dev_set_drvdata(dev, cygaud); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aud"); + cygaud->audio = devm_ioremap_resource(dev, res); + if (IS_ERR(cygaud->audio)) + return PTR_ERR(cygaud->audio); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "i2s_in"); + cygaud->i2s_in = devm_ioremap_resource(dev, res); + if (IS_ERR(cygaud->i2s_in)) + return PTR_ERR(cygaud->i2s_in); + + /* Tri-state all controlable pins until we know that we need them */ + writel(CYGNUS_SSP_TRISTATE_MASK, + cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE); + + node_count = of_get_child_count(pdev->dev.of_node); + if ((node_count < 1) || (node_count > CYGNUS_MAX_PORTS)) { + dev_err(dev, "child nodes is %d. Must be between 1 and %d\n", + node_count, CYGNUS_MAX_PORTS); + return -EINVAL; + } + + active_port_count = 0; + for_each_available_child_of_node(pdev->dev.of_node, child_node) { + err = parse_ssp_child_node(pdev, child_node, cygaud, + &cygnus_ssp_dai[active_port_count]); + + /* negative is err, 0 is active and good, 1 is disabled */ + if (err < 0) + return err; + else if (!err) { + dev_dbg(dev, "Activating DAI: %s\n", + cygnus_ssp_dai[active_port_count].name); + active_port_count++; + } + } + + cygaud->dev = dev; + cygaud->active_ports = 0; + + dev_dbg(dev, "Registering %d DAIs\n", active_port_count); + err = snd_soc_register_component(dev, &cygnus_ssp_component, + cygnus_ssp_dai, active_port_count); + if (err) { + dev_err(dev, "snd_soc_register_dai failed\n"); + return err; + } + + cygaud->irq_num = platform_get_irq(pdev, 0); + if (cygaud->irq_num <= 0) { + dev_err(dev, "platform_get_irq failed\n"); + err = cygaud->irq_num; + goto err_irq; + } + + err = audio_clk_init(pdev, cygaud); + if (err) { + dev_err(dev, "audio clock initialization failed\n"); + goto err_irq; + } + + err = cygnus_soc_platform_register(dev, cygaud); + if (err) { + dev_err(dev, "platform reg error %d\n", err); + goto err_platform_reg; + } + + return 0; + +err_platform_reg: + audio_clk_exit(cygaud); +err_irq: + snd_soc_unregister_component(dev); + return err; +} + +static int cygnus_ssp_remove(struct platform_device *pdev) +{ + struct cygnus_audio *cygaud = dev_get_drvdata(&pdev->dev); + + audio_clk_exit(cygaud); + + cygnus_soc_platform_unregister(&pdev->dev); + snd_soc_unregister_component(&pdev->dev); + + return 0; +} + +static const struct of_device_id cygnus_ssp_of_match[] = { + { .compatible = "brcm,cygnus-audio" }, + {}, +}; +MODULE_DEVICE_TABLE(of, cygnus_ssp_of_match); + +static struct platform_driver cygnus_ssp_driver = { + .probe = cygnus_ssp_probe, + .remove = cygnus_ssp_remove, + .driver = { + .name = "cygnus-ssp", + .of_match_table = cygnus_ssp_of_match, + }, +}; + +module_platform_driver(cygnus_ssp_driver); + +MODULE_ALIAS("platform:cygnus-ssp"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Cygnus ASoC SSP Interface"); diff --git a/sound/soc/bcm/cygnus-ssp.h b/sound/soc/bcm/cygnus-ssp.h new file mode 100644 index 0000000..241b81f --- /dev/null +++ b/sound/soc/bcm/cygnus-ssp.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __CYGNUS_SSP_H__ +#define __CYGNUS_SSP_H__ + +#define CYGNUS_TDM_DAI_MAX_SLOTS 16 + +#define CYGNUS_MAX_PLAYBACK_PORTS 4 +#define CYGNUS_MAX_CAPTURE_PORTS 3 +#define CYGNUS_MAX_I2S_PORTS 3 +#define CYGNUS_MAX_PORTS CYGNUS_MAX_PLAYBACK_PORTS +#define CYGNUS_AUIDO_MAX_NUM_CLKS 3 + +#define CYGNUS_SSP_FRAMEBITS_DIV 1 + +#define CYGNUS_SSPMODE_I2S 0 +#define CYGNUS_SSPMODE_TDM 1 +#define CYGNUS_SSPMODE_UNKNOWN -1 + +#define CYGNUS_SSP_CLKSRC_PLL 0 + +/* Max string length of our dt property names */ +#define PROP_LEN_MAX 40 + +struct ringbuf_regs { + unsigned rdaddr; + unsigned wraddr; + unsigned baseaddr; + unsigned endaddr; + unsigned fmark; /* freemark for play, fullmark for caputure */ + unsigned period_bytes; + unsigned buf_size; +}; + +#define RINGBUF_REG_PLAYBACK(num) ((struct ringbuf_regs) { \ + .rdaddr = SRC_RBUF_ ##num## _RDADDR_OFFSET, \ + .wraddr = SRC_RBUF_ ##num## _WRADDR_OFFSET, \ + .baseaddr = SRC_RBUF_ ##num## _BASEADDR_OFFSET, \ + .endaddr = SRC_RBUF_ ##num## _ENDADDR_OFFSET, \ + .fmark = SRC_RBUF_ ##num## _FREE_MARK_OFFSET, \ + .period_bytes = 0, \ + .buf_size = 0, \ +}) + +#define RINGBUF_REG_CAPTURE(num) ((struct ringbuf_regs) { \ + .rdaddr = DST_RBUF_ ##num## _RDADDR_OFFSET, \ + .wraddr = DST_RBUF_ ##num## _WRADDR_OFFSET, \ + .baseaddr = DST_RBUF_ ##num## _BASEADDR_OFFSET, \ + .endaddr = DST_RBUF_ ##num## _ENDADDR_OFFSET, \ + .fmark = DST_RBUF_ ##num## _FULL_MARK_OFFSET, \ + .period_bytes = 0, \ + .buf_size = 0, \ +}) + +enum cygnus_audio_port_type { + PORT_TDM, + PORT_SPDIF, +}; + +struct cygnus_ssp_regs { + u32 i2s_stream_cfg; + u32 i2s_cfg; + u32 i2s_cap_stream_cfg; + u32 i2s_cap_cfg; + u32 i2s_mclk_cfg; + + u32 bf_destch_ctrl; + u32 bf_destch_cfg; + u32 bf_sourcech_ctrl; + u32 bf_sourcech_cfg; + u32 bf_sourcech_grp; +}; + +struct cygnus_aio_port { + int portnum; + int mode; + bool is_slave; + int streams_on; /* will be 0 if both capture and play are off */ + int fsync_width; + int port_type; + + u32 mclk; + u32 lrclk; + u32 bit_per_frame; + + struct cygnus_audio *cygaud; + struct cygnus_ssp_regs regs; + + struct ringbuf_regs play_rb_regs; + struct ringbuf_regs capture_rb_regs; + + struct snd_pcm_substream *play_stream; + struct snd_pcm_substream *capture_stream; +}; + + +struct cygnus_audio { + struct cygnus_aio_port portinfo[CYGNUS_MAX_PORTS]; + + int irq_num; + void __iomem *audio; + struct device *dev; + void __iomem *i2s_in; + + struct clk *audio_clk[CYGNUS_AUIDO_MAX_NUM_CLKS]; + int active_ports; + unsigned long vco_rate; +}; + +extern int cygnus_ssp_get_mode(struct snd_soc_dai *cpu_dai); +extern int cygnus_ssp_add_pll_tweak_controls(struct snd_soc_pcm_runtime *rtd); +extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, + int len); +extern int cygnus_soc_platform_register(struct device *dev, + struct cygnus_audio *cygaud); +extern int cygnus_soc_platform_unregister(struct device *dev); +extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, + int len); +#endif -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver 2015-11-10 0:17 ` Simran Rai (?) @ 2015-11-22 13:44 ` Mark Brown -1 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2015-11-22 13:44 UTC (permalink / raw) To: Simran Rai Cc: Mark Rutland, devicetree, alsa-devel, Lori Hikichi, Scott Branden, Pawel Moll, Ian Campbell, Ray Jui, Takashi Iwai, linux-kernel, Liam Girdwood, Rob Herring, bcm-kernel-feedback-list, Kumar Gala, Arun Parameswaran, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 1693 bytes --] On Mon, Nov 09, 2015 at 04:17:43PM -0800, Simran Rai wrote: > +#ifdef CONFIG_PM_SLEEP > +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) > +{ > + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); > + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); > + > + audio_ssp_out_disable(aio); > + audio_ssp_in_disable(aio); > + if (cygaud->active_ports > 0) > + cygaud->active_ports--; > + > + return 0; > +} > + > +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) > +{ > + return 0; > +} I'm a bit confused here - why do we need to disable things on suspend but not reenable them on resume? I'd expect that the core would have quiesced any streams that need to be suspended before we get as far as suspending the drivers. Please also remove empty functions. Now I check I see that I'm repeating the questions I had on my previous review: | Blank line between functions and remove empty functions. Though I'm not | clear why the result doesn't undo what the suspend did... Please don't ignore review comments. > + parent = clk_get_parent(cygaud->audio_clk[0]); > + if (IS_ERR(parent)) { > + error = PTR_ERR(parent); > + goto err_get_parent; > + } > + > + /* Set PLL VCO Frequency (Hz) to default */ > + error = clk_set_rate(parent, DEFAULT_VCO); > + if (error) { > + dev_err(&pdev->dev, > + "%s Set PLL VCO rate failed: %d\n", __func__, error); > + goto err_get_parent; > + } I would expect any initialisationn of clocks beyond the ones that the device directly interacts with to be handled within the clock API configuration rather than in a specific driver, this avoids the driver being dependent on a particular system integration. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-11-22 13:44 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2015-11-22 13:44 UTC (permalink / raw) To: Simran Rai Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Jaroslav Kysela, Takashi Iwai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel [-- Attachment #1: Type: text/plain, Size: 1693 bytes --] On Mon, Nov 09, 2015 at 04:17:43PM -0800, Simran Rai wrote: > +#ifdef CONFIG_PM_SLEEP > +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) > +{ > + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); > + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); > + > + audio_ssp_out_disable(aio); > + audio_ssp_in_disable(aio); > + if (cygaud->active_ports > 0) > + cygaud->active_ports--; > + > + return 0; > +} > + > +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) > +{ > + return 0; > +} I'm a bit confused here - why do we need to disable things on suspend but not reenable them on resume? I'd expect that the core would have quiesced any streams that need to be suspended before we get as far as suspending the drivers. Please also remove empty functions. Now I check I see that I'm repeating the questions I had on my previous review: | Blank line between functions and remove empty functions. Though I'm not | clear why the result doesn't undo what the suspend did... Please don't ignore review comments. > + parent = clk_get_parent(cygaud->audio_clk[0]); > + if (IS_ERR(parent)) { > + error = PTR_ERR(parent); > + goto err_get_parent; > + } > + > + /* Set PLL VCO Frequency (Hz) to default */ > + error = clk_set_rate(parent, DEFAULT_VCO); > + if (error) { > + dev_err(&pdev->dev, > + "%s Set PLL VCO rate failed: %d\n", __func__, error); > + goto err_get_parent; > + } I would expect any initialisationn of clocks beyond the ones that the device directly interacts with to be handled within the clock API configuration rather than in a specific driver, this avoids the driver being dependent on a particular system integration. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-11-22 13:44 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2015-11-22 13:44 UTC (permalink / raw) To: linux-arm-kernel On Mon, Nov 09, 2015 at 04:17:43PM -0800, Simran Rai wrote: > +#ifdef CONFIG_PM_SLEEP > +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) > +{ > + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); > + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); > + > + audio_ssp_out_disable(aio); > + audio_ssp_in_disable(aio); > + if (cygaud->active_ports > 0) > + cygaud->active_ports--; > + > + return 0; > +} > + > +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) > +{ > + return 0; > +} I'm a bit confused here - why do we need to disable things on suspend but not reenable them on resume? I'd expect that the core would have quiesced any streams that need to be suspended before we get as far as suspending the drivers. Please also remove empty functions. Now I check I see that I'm repeating the questions I had on my previous review: | Blank line between functions and remove empty functions. Though I'm not | clear why the result doesn't undo what the suspend did... Please don't ignore review comments. > + parent = clk_get_parent(cygaud->audio_clk[0]); > + if (IS_ERR(parent)) { > + error = PTR_ERR(parent); > + goto err_get_parent; > + } > + > + /* Set PLL VCO Frequency (Hz) to default */ > + error = clk_set_rate(parent, DEFAULT_VCO); > + if (error) { > + dev_err(&pdev->dev, > + "%s Set PLL VCO rate failed: %d\n", __func__, error); > + goto err_get_parent; > + } I would expect any initialisationn of clocks beyond the ones that the device directly interacts with to be handled within the clock API configuration rather than in a specific driver, this avoids the driver being dependent on a particular system integration. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151122/33925a71/attachment.sig> ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver 2015-11-22 13:44 ` Mark Brown (?) @ 2015-12-02 2:17 ` Simran Rai -1 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-12-02 2:17 UTC (permalink / raw) To: Mark Brown Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Jaroslav Kysela, Takashi Iwai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel On 11/22/2015 5:44 AM, Mark Brown wrote: > On Mon, Nov 09, 2015 at 04:17:43PM -0800, Simran Rai wrote: > >> +#ifdef CONFIG_PM_SLEEP >> +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) >> +{ >> + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); >> + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); >> + >> + audio_ssp_out_disable(aio); >> + audio_ssp_in_disable(aio); >> + if (cygaud->active_ports > 0) >> + cygaud->active_ports--; >> + >> + return 0; >> +} >> + >> +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) >> +{ >> + return 0; >> +} > I'm a bit confused here - why do we need to disable things on suspend > but not reenable them on resume? I'd expect that the core would have > quiesced any streams that need to be suspended before we get as far as > suspending the drivers. > > Please also remove empty functions. > > Now I check I see that I'm repeating the questions I had on my previous > review: > > | Blank line between functions and remove empty functions. Though I'm not > | clear why the result doesn't undo what the suspend did... > > Please don't ignore review comments. Let me investigate this further and debug why the core did not quiescence the streams. > >> + parent = clk_get_parent(cygaud->audio_clk[0]); >> + if (IS_ERR(parent)) { >> + error = PTR_ERR(parent); >> + goto err_get_parent; >> + } >> + >> + /* Set PLL VCO Frequency (Hz) to default */ >> + error = clk_set_rate(parent, DEFAULT_VCO); >> + if (error) { >> + dev_err(&pdev->dev, >> + "%s Set PLL VCO rate failed: %d\n", __func__, error); >> + goto err_get_parent; >> + } > I would expect any initialisationn of clocks beyond the ones that the > device directly interacts with to be handled within the clock API > configuration rather than in a specific driver, this avoids the driver > being dependent on a particular system integration. I will have to figure out a way to propagate the frequency from leaf clocks to the parent clock. Will send out another patch with the fix. Thanks, Simran ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-12-02 2:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-12-02 2:17 UTC (permalink / raw) To: Mark Brown Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Jaroslav Kysela, Takashi Iwai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel On 11/22/2015 5:44 AM, Mark Brown wrote: > On Mon, Nov 09, 2015 at 04:17:43PM -0800, Simran Rai wrote: > >> +#ifdef CONFIG_PM_SLEEP >> +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) >> +{ >> + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); >> + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); >> + >> + audio_ssp_out_disable(aio); >> + audio_ssp_in_disable(aio); >> + if (cygaud->active_ports > 0) >> + cygaud->active_ports--; >> + >> + return 0; >> +} >> + >> +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) >> +{ >> + return 0; >> +} > I'm a bit confused here - why do we need to disable things on suspend > but not reenable them on resume? I'd expect that the core would have > quiesced any streams that need to be suspended before we get as far as > suspending the drivers. > > Please also remove empty functions. > > Now I check I see that I'm repeating the questions I had on my previous > review: > > | Blank line between functions and remove empty functions. Though I'm not > | clear why the result doesn't undo what the suspend did... > > Please don't ignore review comments. Let me investigate this further and debug why the core did not quiescence the streams. > >> + parent = clk_get_parent(cygaud->audio_clk[0]); >> + if (IS_ERR(parent)) { >> + error = PTR_ERR(parent); >> + goto err_get_parent; >> + } >> + >> + /* Set PLL VCO Frequency (Hz) to default */ >> + error = clk_set_rate(parent, DEFAULT_VCO); >> + if (error) { >> + dev_err(&pdev->dev, >> + "%s Set PLL VCO rate failed: %d\n", __func__, error); >> + goto err_get_parent; >> + } > I would expect any initialisationn of clocks beyond the ones that the > device directly interacts with to be handled within the clock API > configuration rather than in a specific driver, this avoids the driver > being dependent on a particular system integration. I will have to figure out a way to propagate the frequency from leaf clocks to the parent clock. Will send out another patch with the fix. Thanks, Simran ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-12-02 2:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-12-02 2:17 UTC (permalink / raw) To: linux-arm-kernel On 11/22/2015 5:44 AM, Mark Brown wrote: > On Mon, Nov 09, 2015 at 04:17:43PM -0800, Simran Rai wrote: > >> +#ifdef CONFIG_PM_SLEEP >> +static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai) >> +{ >> + struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai); >> + struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(cpu_dai); >> + >> + audio_ssp_out_disable(aio); >> + audio_ssp_in_disable(aio); >> + if (cygaud->active_ports > 0) >> + cygaud->active_ports--; >> + >> + return 0; >> +} >> + >> +static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai) >> +{ >> + return 0; >> +} > I'm a bit confused here - why do we need to disable things on suspend > but not reenable them on resume? I'd expect that the core would have > quiesced any streams that need to be suspended before we get as far as > suspending the drivers. > > Please also remove empty functions. > > Now I check I see that I'm repeating the questions I had on my previous > review: > > | Blank line between functions and remove empty functions. Though I'm not > | clear why the result doesn't undo what the suspend did... > > Please don't ignore review comments. Let me investigate this further and debug why the core did not quiescence the streams. > >> + parent = clk_get_parent(cygaud->audio_clk[0]); >> + if (IS_ERR(parent)) { >> + error = PTR_ERR(parent); >> + goto err_get_parent; >> + } >> + >> + /* Set PLL VCO Frequency (Hz) to default */ >> + error = clk_set_rate(parent, DEFAULT_VCO); >> + if (error) { >> + dev_err(&pdev->dev, >> + "%s Set PLL VCO rate failed: %d\n", __func__, error); >> + goto err_get_parent; >> + } > I would expect any initialisationn of clocks beyond the ones that the > device directly interacts with to be handled within the clock API > configuration rather than in a specific driver, this avoids the driver > being dependent on a particular system integration. I will have to figure out a way to propagate the frequency from leaf clocks to the parent clock. Will send out another patch with the fix. Thanks, Simran ^ permalink raw reply [flat|nested] 21+ messages in thread
[parent not found: <565E54D2.50806-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>]
* Re: [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver 2015-12-02 2:17 ` Simran Rai (?) @ 2015-12-02 10:45 ` Mark Brown -1 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2015-12-02 10:45 UTC (permalink / raw) To: Simran Rai Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Jaroslav Kysela, Takashi Iwai, Lori Hikichi, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Arun Parameswaran, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw [-- Attachment #1: Type: text/plain, Size: 577 bytes --] On Tue, Dec 01, 2015 at 06:17:54PM -0800, Simran Rai wrote: > On 11/22/2015 5:44 AM, Mark Brown wrote: > >I would expect any initialisationn of clocks beyond the ones that the > >device directly interacts with to be handled within the clock API > >configuration rather than in a specific driver, this avoids the driver > >being dependent on a particular system integration. > I will have to figure out a way to propagate the frequency from leaf clocks to the parent > clock. Will send out another patch with the fix. The idea is that the clock API should take care of this. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-12-02 10:45 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2015-12-02 10:45 UTC (permalink / raw) To: Simran Rai Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Jaroslav Kysela, Takashi Iwai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel [-- Attachment #1: Type: text/plain, Size: 577 bytes --] On Tue, Dec 01, 2015 at 06:17:54PM -0800, Simran Rai wrote: > On 11/22/2015 5:44 AM, Mark Brown wrote: > >I would expect any initialisationn of clocks beyond the ones that the > >device directly interacts with to be handled within the clock API > >configuration rather than in a specific driver, this avoids the driver > >being dependent on a particular system integration. > I will have to figure out a way to propagate the frequency from leaf clocks to the parent > clock. Will send out another patch with the fix. The idea is that the clock API should take care of this. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver @ 2015-12-02 10:45 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2015-12-02 10:45 UTC (permalink / raw) To: linux-arm-kernel On Tue, Dec 01, 2015 at 06:17:54PM -0800, Simran Rai wrote: > On 11/22/2015 5:44 AM, Mark Brown wrote: > >I would expect any initialisationn of clocks beyond the ones that the > >device directly interacts with to be handled within the clock API > >configuration rather than in a specific driver, this avoids the driver > >being dependent on a particular system integration. > I will have to figure out a way to propagate the frequency from leaf clocks to the parent > clock. Will send out another patch with the fix. The idea is that the clock API should take care of this. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151202/70a271d5/attachment.sig> ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 3/3] ASoC: cygnus: Add Cygnus audio DMA driver 2015-11-10 0:17 ` Simran Rai (?) @ 2015-11-10 0:17 ` Simran Rai -1 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel This patch adds Cygnus audio DMA driver. It supports playback and capture modes and uses ringbuffers for data transfer. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <arunp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 873 insertions(+) create mode 100644 sound/soc/bcm/cygnus-pcm.c diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig index 6a834e1..d528aac 100644 --- a/sound/soc/bcm/Kconfig +++ b/sound/soc/bcm/Kconfig @@ -7,3 +7,12 @@ config SND_BCM2835_SOC_I2S Say Y or M if you want to add support for codecs attached to the BCM2835 I2S interface. You will also need to select the audio interfaces to support below. + +config SND_SOC_CYGNUS + tristate "SoC platform audio for Broadcom Cygnus chips" + depends on ARCH_BCM_CYGNUS || COMPILE_TEST + help + Say Y if you want to add support for ASoC audio on Broadcom + Cygnus chips (bcm958300, bcm958305, bcm911360) + + If you don't know what to do here, say N. \ No newline at end of file diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile index bc816b7..fc739d0 100644 --- a/sound/soc/bcm/Makefile +++ b/sound/soc/bcm/Makefile @@ -3,3 +3,8 @@ snd-soc-bcm2835-i2s-objs := bcm2835-i2s.o obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd-soc-bcm2835-i2s.o +# CYGNUS Platform Support +snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o + +obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + diff --git a/sound/soc/bcm/cygnus-pcm.c b/sound/soc/bcm/cygnus-pcm.c new file mode 100644 index 0000000..23381306 --- /dev/null +++ b/sound/soc/bcm/cygnus-pcm.c @@ -0,0 +1,859 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/debugfs.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "cygnus-ssp.h" + +/* Register offset needed for ASoC PCM module */ + +#define INTH_R5F_STATUS_OFFSET 0x040 +#define INTH_R5F_CLEAR_OFFSET 0x048 +#define INTH_R5F_MASK_SET_OFFSET 0x050 +#define INTH_R5F_MASK_CLEAR_OFFSET 0x054 + +#define BF_REARM_FREE_MARK_OFFSET 0x344 +#define BF_REARM_FULL_MARK_OFFSET 0x348 + +/* Ring Buffer Ctrl Regs --- Start */ +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_RDADDR_REG_BASE */ +#define SRC_RBUF_0_RDADDR_OFFSET 0x500 +#define SRC_RBUF_1_RDADDR_OFFSET 0x518 +#define SRC_RBUF_2_RDADDR_OFFSET 0x530 +#define SRC_RBUF_3_RDADDR_OFFSET 0x548 +#define SRC_RBUF_4_RDADDR_OFFSET 0x560 +#define SRC_RBUF_5_RDADDR_OFFSET 0x578 +#define SRC_RBUF_6_RDADDR_OFFSET 0x590 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_WRADDR_REG_BASE */ +#define SRC_RBUF_0_WRADDR_OFFSET 0x504 +#define SRC_RBUF_1_WRADDR_OFFSET 0x51c +#define SRC_RBUF_2_WRADDR_OFFSET 0x534 +#define SRC_RBUF_3_WRADDR_OFFSET 0x54c +#define SRC_RBUF_4_WRADDR_OFFSET 0x564 +#define SRC_RBUF_5_WRADDR_OFFSET 0x57c +#define SRC_RBUF_6_WRADDR_OFFSET 0x594 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_BASEADDR_REG_BASE */ +#define SRC_RBUF_0_BASEADDR_OFFSET 0x508 +#define SRC_RBUF_1_BASEADDR_OFFSET 0x520 +#define SRC_RBUF_2_BASEADDR_OFFSET 0x538 +#define SRC_RBUF_3_BASEADDR_OFFSET 0x550 +#define SRC_RBUF_4_BASEADDR_OFFSET 0x568 +#define SRC_RBUF_5_BASEADDR_OFFSET 0x580 +#define SRC_RBUF_6_BASEADDR_OFFSET 0x598 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_ENDADDR_REG_BASE */ +#define SRC_RBUF_0_ENDADDR_OFFSET 0x50c +#define SRC_RBUF_1_ENDADDR_OFFSET 0x524 +#define SRC_RBUF_2_ENDADDR_OFFSET 0x53c +#define SRC_RBUF_3_ENDADDR_OFFSET 0x554 +#define SRC_RBUF_4_ENDADDR_OFFSET 0x56c +#define SRC_RBUF_5_ENDADDR_OFFSET 0x584 +#define SRC_RBUF_6_ENDADDR_OFFSET 0x59c + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_FREE_MARK_REG_BASE */ +#define SRC_RBUF_0_FREE_MARK_OFFSET 0x510 +#define SRC_RBUF_1_FREE_MARK_OFFSET 0x528 +#define SRC_RBUF_2_FREE_MARK_OFFSET 0x540 +#define SRC_RBUF_3_FREE_MARK_OFFSET 0x558 +#define SRC_RBUF_4_FREE_MARK_OFFSET 0x570 +#define SRC_RBUF_5_FREE_MARK_OFFSET 0x588 +#define SRC_RBUF_6_FREE_MARK_OFFSET 0x5a0 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_RDADDR_REG_BASE */ +#define DST_RBUF_0_RDADDR_OFFSET 0x5c0 +#define DST_RBUF_1_RDADDR_OFFSET 0x5d8 +#define DST_RBUF_2_RDADDR_OFFSET 0x5f0 +#define DST_RBUF_3_RDADDR_OFFSET 0x608 +#define DST_RBUF_4_RDADDR_OFFSET 0x620 +#define DST_RBUF_5_RDADDR_OFFSET 0x638 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_WRADDR_REG_BASE */ +#define DST_RBUF_0_WRADDR_OFFSET 0x5c4 +#define DST_RBUF_1_WRADDR_OFFSET 0x5dc +#define DST_RBUF_2_WRADDR_OFFSET 0x5f4 +#define DST_RBUF_3_WRADDR_OFFSET 0x60c +#define DST_RBUF_4_WRADDR_OFFSET 0x624 +#define DST_RBUF_5_WRADDR_OFFSET 0x63c + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_BASEADDR_REG_BASE */ +#define DST_RBUF_0_BASEADDR_OFFSET 0x5c8 +#define DST_RBUF_1_BASEADDR_OFFSET 0x5e0 +#define DST_RBUF_2_BASEADDR_OFFSET 0x5f8 +#define DST_RBUF_3_BASEADDR_OFFSET 0x610 +#define DST_RBUF_4_BASEADDR_OFFSET 0x628 +#define DST_RBUF_5_BASEADDR_OFFSET 0x640 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_ENDADDR_REG_BASE */ +#define DST_RBUF_0_ENDADDR_OFFSET 0x5cc +#define DST_RBUF_1_ENDADDR_OFFSET 0x5e4 +#define DST_RBUF_2_ENDADDR_OFFSET 0x5fc +#define DST_RBUF_3_ENDADDR_OFFSET 0x614 +#define DST_RBUF_4_ENDADDR_OFFSET 0x62c +#define DST_RBUF_5_ENDADDR_OFFSET 0x644 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_FULL_MARK_REG_BASE */ +#define DST_RBUF_0_FULL_MARK_OFFSET 0x5d0 +#define DST_RBUF_1_FULL_MARK_OFFSET 0x5e8 +#define DST_RBUF_2_FULL_MARK_OFFSET 0x600 +#define DST_RBUF_3_FULL_MARK_OFFSET 0x618 +#define DST_RBUF_4_FULL_MARK_OFFSET 0x630 +#define DST_RBUF_5_FULL_MARK_OFFSET 0x648 +/* Ring Buffer Ctrl Regs --- End */ + +/* Error Status Regs --- Start */ +/* AUD_FMM_BF_ESR_ESRX_STATUS_REG_BASE */ +#define ESR0_STATUS_OFFSET 0x900 +#define ESR1_STATUS_OFFSET 0x918 +#define ESR2_STATUS_OFFSET 0x930 +#define ESR3_STATUS_OFFSET 0x948 +#define ESR4_STATUS_OFFSET 0x960 + +/* AUD_FMM_BF_ESR_ESRX_STATUS_CLEAR_REG_BASE */ +#define ESR0_STATUS_CLR_OFFSET 0x908 +#define ESR1_STATUS_CLR_OFFSET 0x920 +#define ESR2_STATUS_CLR_OFFSET 0x938 +#define ESR3_STATUS_CLR_OFFSET 0x950 +#define ESR4_STATUS_CLR_OFFSET 0x968 + +/* AUD_FMM_BF_ESR_ESRX_MASK_REG_BASE */ +#define ESR0_MASK_STATUS_OFFSET 0x90c +#define ESR1_MASK_STATUS_OFFSET 0x924 +#define ESR2_MASK_STATUS_OFFSET 0x93c +#define ESR3_MASK_STATUS_OFFSET 0x954 +#define ESR4_MASK_STATUS_OFFSET 0x96c + +/* AUD_FMM_BF_ESR_ESRX_MASK_SET_REG_BASE */ +#define ESR0_MASK_SET_OFFSET 0x910 +#define ESR1_MASK_SET_OFFSET 0x928 +#define ESR2_MASK_SET_OFFSET 0x940 +#define ESR3_MASK_SET_OFFSET 0x958 +#define ESR4_MASK_SET_OFFSET 0x970 + +/* AUD_FMM_BF_ESR_ESRX_MASK_CLEAR_REG_BASE */ +#define ESR0_MASK_CLR_OFFSET 0x914 +#define ESR1_MASK_CLR_OFFSET 0x92c +#define ESR2_MASK_CLR_OFFSET 0x944 +#define ESR3_MASK_CLR_OFFSET 0x95c +#define ESR4_MASK_CLR_OFFSET 0x974 +/* Error Status Regs --- End */ + +#define R5F_ESR0_SHIFT 0 /* esr0 = fifo underflow */ +#define R5F_ESR1_SHIFT 1 /* esr1 = ringbuf underflow */ +#define R5F_ESR2_SHIFT 2 /* esr2 = ringbuf overflow */ +#define R5F_ESR3_SHIFT 3 /* esr3 = freemark */ +#define R5F_ESR4_SHIFT 4 /* esr4 = fullmark */ + + +/* Mask for R5F register. Set all relevant interrupt for playback handler */ +#define ANY_PLAYBACK_IRQ (BIT(R5F_ESR0_SHIFT) | \ + BIT(R5F_ESR1_SHIFT) | \ + BIT(R5F_ESR3_SHIFT)) + +/* Mask for R5F register. Set all relevant interrupt for capture handler */ +#define ANY_CAPTURE_IRQ (BIT(R5F_ESR2_SHIFT) | BIT(R5F_ESR4_SHIFT)) + +/* + * PERIOD_BYTES_MIN is the number of bytes to at which the interrupt will tick. + * This number should be a multiple of 256. Minimum value is 256 + */ +#define PERIOD_BYTES_MIN 0x100 + +static const struct snd_pcm_hardware cygnus_pcm_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + + /* A period is basically an interrupt */ + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = 0x10000, + + /* period_min/max gives range of approx interrupts per buffer */ + .periods_min = 2, + .periods_max = 8, + + /* + * maximum buffer size in bytes = period_bytes_max * periods_max + * We allocate this amount of data for each enabled channel + */ + .buffer_bytes_max = 4 * 0x8000, +}; + +static u64 cygnus_dma_dmamask = DMA_BIT_MASK(32); + +static struct cygnus_aio_port *cygnus_dai_get_dma_data( + struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + + return snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream); +} + +static void ringbuf_set_initial(void __iomem *audio_io, + struct ringbuf_regs *p_rbuf, + bool is_playback, + u32 start, + u32 periodsize, + u32 bufsize) +{ + u32 initial_rd; + u32 initial_wr; + u32 end; + u32 fmark_val; /* free or full mark */ + + p_rbuf->period_bytes = periodsize; + p_rbuf->buf_size = bufsize; + + if (is_playback) { + /* Set the pointers to indicate full (flip uppermost bit) */ + initial_rd = start; + initial_wr = initial_rd ^ BIT(31); + } else { + /* Set the pointers to indicate empty */ + initial_wr = start; + initial_rd = initial_wr; + } + + end = start + bufsize - 1; + + /* + * The interrupt will fire when free/full mark is *exceeded* + * The fmark value must be multiple of PERIOD_BYTES_MIN so set fmark + * to be PERIOD_BYTES_MIN less than the period size. + */ + fmark_val = periodsize - PERIOD_BYTES_MIN; + + writel(start, audio_io + p_rbuf->baseaddr); + writel(end, audio_io + p_rbuf->endaddr); + writel(fmark_val, audio_io + p_rbuf->fmark); + writel(initial_rd, audio_io + p_rbuf->rdaddr); + writel(initial_wr, audio_io + p_rbuf->wraddr); +} + +static int configure_ringbuf_regs(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf; + int status = 0; + + aio = cygnus_dai_get_dma_data(substream); + + /* Map the ssp portnum to a set of ring buffers. */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + p_rbuf = &aio->play_rb_regs; + + switch (aio->portnum) { + case 0: + *p_rbuf = RINGBUF_REG_PLAYBACK(0); + break; + case 1: + *p_rbuf = RINGBUF_REG_PLAYBACK(2); + break; + case 2: + *p_rbuf = RINGBUF_REG_PLAYBACK(4); + break; + case 3: /* SPDIF */ + *p_rbuf = RINGBUF_REG_PLAYBACK(6); + break; + default: + status = -EINVAL; + } + } else { + p_rbuf = &aio->capture_rb_regs; + + switch (aio->portnum) { + case 0: + *p_rbuf = RINGBUF_REG_CAPTURE(0); + break; + case 1: + *p_rbuf = RINGBUF_REG_CAPTURE(2); + break; + case 2: + *p_rbuf = RINGBUF_REG_CAPTURE(4); + break; + default: + status = -EINVAL; + } + } + + return status; +} + +static struct ringbuf_regs *get_ringbuf(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + p_rbuf = &aio->play_rb_regs; + else + p_rbuf = &aio->capture_rb_regs; + + return p_rbuf; +} + +static void enable_intr(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + u32 clear_mask; + + aio = cygnus_dai_get_dma_data(substream); + + /* The port number maps to the bit position to be cleared */ + clear_mask = BIT(aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Clear interrupt status before enabling them */ + writel(clear_mask, aio->cygaud->audio + ESR0_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR1_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR3_STATUS_CLR_OFFSET); + /* Unmask the interrupts of the given port*/ + writel(clear_mask, aio->cygaud->audio + ESR0_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR1_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR3_MASK_CLR_OFFSET); + + writel(ANY_PLAYBACK_IRQ, + aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET); + } else { + writel(clear_mask, aio->cygaud->audio + ESR2_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR4_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR2_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR4_MASK_CLR_OFFSET); + + writel(ANY_CAPTURE_IRQ, + aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET); + } + +} + +static void disable_intr(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + u32 set_mask; + + aio = cygnus_dai_get_dma_data(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s on port %d\n", __func__, aio->portnum); + + /* The port number maps to the bit position to be set */ + set_mask = BIT(aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Mask the interrupts of the given port*/ + writel(set_mask, aio->cygaud->audio + ESR0_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR1_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR3_MASK_SET_OFFSET); + } else { + writel(set_mask, aio->cygaud->audio + ESR2_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR4_MASK_SET_OFFSET); + } + +} + +static int cygnus_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + enable_intr(substream); + break; + + case SNDRV_PCM_TRIGGER_STOP: + disable_intr(substream); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void cygnus_pcm_period_elapsed(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf = NULL; + u32 regval; + + aio = cygnus_dai_get_dma_data(substream); + + p_rbuf = get_ringbuf(substream); + + /* + * If free/full mark interrupt occurs, provide timestamp + * to ALSA and update appropriate idx by period_bytes + */ + snd_pcm_period_elapsed(substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Set the ring buffer to full */ + regval = readl(aio->cygaud->audio + p_rbuf->rdaddr); + regval = regval ^ BIT(31); + writel(regval, aio->cygaud->audio + p_rbuf->wraddr); + } else { + /* Set the ring buffer to empty */ + regval = readl(aio->cygaud->audio + p_rbuf->wraddr); + writel(regval, aio->cygaud->audio + p_rbuf->rdaddr); + } +} + +/* + * ESR0/1/3 status Description + * 0x1 I2S0_out port caused interrupt + * 0x2 I2S1_out port caused interrupt + * 0x4 I2S2_out port caused interrupt + * 0x8 SPDIF_out port caused interrupt + */ +static void handle_playback_irq(struct cygnus_audio *cygaud) +{ + void __iomem *audio_io; + u32 port; + u32 esr_status0, esr_status1, esr_status3; + + audio_io = cygaud->audio; + + /* + * ESR status gets updates with/without interrupts enabled. + * So, check the ESR mask, which provides interrupt enable/ + * disable status and use it to determine which ESR status + * should be serviced. + */ + esr_status0 = readl(audio_io + ESR0_STATUS_OFFSET); + esr_status0 &= ~readl(audio_io + ESR0_MASK_STATUS_OFFSET); + esr_status1 = readl(audio_io + ESR1_STATUS_OFFSET); + esr_status1 &= ~readl(audio_io + ESR1_MASK_STATUS_OFFSET); + esr_status3 = readl(audio_io + ESR3_STATUS_OFFSET); + esr_status3 &= ~readl(audio_io + ESR3_MASK_STATUS_OFFSET); + + for (port = 0; port < CYGNUS_MAX_PLAYBACK_PORTS; port++) { + u32 esrmask = BIT(port); + + /* + * Ringbuffer or FIFO underflow + * If we get this interrupt then, it is also true that we have + * not yet responded to the freemark interrupt. + * Log a debug message. The freemark handler below will + * handle getting everything going again. + */ + if ((esrmask & esr_status1) || (esrmask & esr_status0)) { + dev_dbg(cygaud->dev, + "Underrun: esr0=0x%x, esr1=0x%x esr3=0x%x\n", + esr_status0, esr_status1, esr_status3); + } + + /* + * Freemark is hit. This is the normal interrupt. + * In typical operation the read and write regs will be equal + */ + if (esrmask & esr_status3) { + struct snd_pcm_substream *playstr; + + playstr = cygaud->portinfo[port].play_stream; + cygnus_pcm_period_elapsed(playstr); + } + } + + /* Clear ESR interrupt */ + writel(esr_status0, audio_io + ESR0_STATUS_CLR_OFFSET); + writel(esr_status1, audio_io + ESR1_STATUS_CLR_OFFSET); + writel(esr_status3, audio_io + ESR3_STATUS_CLR_OFFSET); + /* Rearm freemark logic by writing 1 to the correct bit */ + writel(esr_status3, audio_io + BF_REARM_FREE_MARK_OFFSET); +} + +/* + * ESR2/4 status Description + * 0x1 I2S0_in port caused interrupt + * 0x2 I2S1_in port caused interrupt + * 0x4 I2S2_in port caused interrupt + */ +static void handle_capture_irq(struct cygnus_audio *cygaud) +{ + void __iomem *audio_io; + u32 port; + u32 esr_status2, esr_status4; + + audio_io = cygaud->audio; + + /* + * ESR status gets updates with/without interrupts enabled. + * So, check the ESR mask, which provides interrupt enable/ + * disable status and use it to determine which ESR status + * should be serviced. + */ + esr_status2 = readl(audio_io + ESR2_STATUS_OFFSET); + esr_status2 &= ~readl(audio_io + ESR2_MASK_STATUS_OFFSET); + esr_status4 = readl(audio_io + ESR4_STATUS_OFFSET); + esr_status4 &= ~readl(audio_io + ESR4_MASK_STATUS_OFFSET); + + for (port = 0; port < CYGNUS_MAX_CAPTURE_PORTS; port++) { + u32 esrmask = BIT(port); + + /* + * Ringbuffer or FIFO overflow + * If we get this interrupt then, it is also true that we have + * not yet responded to the fullmark interrupt. + * Log a debug message. The fullmark handler below will + * handle getting everything going again. + */ + if (esrmask & esr_status2) + dev_dbg(cygaud->dev, + "Overflow: esr2=0x%x\n", esr_status2); + + if (esrmask & esr_status4) { + struct snd_pcm_substream *capstr; + + capstr = cygaud->portinfo[port].capture_stream; + cygnus_pcm_period_elapsed(capstr); + } + } + + writel(esr_status2, audio_io + ESR2_STATUS_CLR_OFFSET); + writel(esr_status4, audio_io + ESR4_STATUS_CLR_OFFSET); + /* Rearm fullmark logic by writing 1 to the correct bit */ + writel(esr_status4, audio_io + BF_REARM_FULL_MARK_OFFSET); +} + +static irqreturn_t cygnus_dma_irq(int irq, void *data) +{ + u32 r5_status; + struct cygnus_audio *cygaud = data; + + /* + * R5 status bits Description + * 0 ESR0 (playback FIFO interrupt) + * 1 ESR1 (playback rbuf interrupt) + * 2 ESR2 (capture rbuf interrupt) + * 3 ESR3 (Freemark play. interrupt) + * 4 ESR4 (Fullmark capt. interrupt) + */ + r5_status = readl(cygaud->audio + INTH_R5F_STATUS_OFFSET); + + if (!(r5_status & (ANY_PLAYBACK_IRQ | ANY_CAPTURE_IRQ))) + return IRQ_NONE; + + /* If playback interrupt happened */ + if (ANY_PLAYBACK_IRQ & r5_status) { + handle_playback_irq(cygaud); + writel(ANY_PLAYBACK_IRQ & r5_status, + cygaud->audio + INTH_R5F_CLEAR_OFFSET); + } + + /* If capture interrupt happened */ + if (ANY_CAPTURE_IRQ & r5_status) { + handle_capture_irq(cygaud); + writel(ANY_CAPTURE_IRQ & r5_status, + cygaud->audio + INTH_R5F_CLEAR_OFFSET); + } + + return IRQ_HANDLED; +} + +static int cygnus_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + int ret; + + aio = cygnus_dai_get_dma_data(substream); + if (!aio) + return -ENODEV; + + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_soc_set_runtime_hwparams(substream, &cygnus_pcm_hw); + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, PERIOD_BYTES_MIN); + if (ret < 0) + return ret; + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, PERIOD_BYTES_MIN); + if (ret < 0) + return ret; + /* + * Keep track of which substream belongs to which port. + * This info is needed by snd_pcm_period_elapsed() in irq_handler + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + aio->play_stream = substream; + else + aio->capture_stream = substream; + + return 0; +} + +static int cygnus_pcm_close(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + + aio = cygnus_dai_get_dma_data(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + aio->play_stream = NULL; + else + aio->capture_stream = NULL; + + if (!aio->play_stream && !aio->capture_stream) + dev_dbg(rtd->cpu_dai->dev, "freed port %d\n", aio->portnum); + + return 0; +} + +static int cygnus_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + int ret = 0; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + return ret; +} + +static int cygnus_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_pcm_set_runtime_buffer(substream, NULL); + return 0; +} + +static int cygnus_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + unsigned long bufsize, periodsize; + int ret = 0; + bool is_play; + u32 start; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + bufsize = snd_pcm_lib_buffer_bytes(substream); + periodsize = snd_pcm_lib_period_bytes(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s (buf_size %lu) (period_size %lu)\n", + __func__, bufsize, periodsize); + + configure_ringbuf_regs(substream); + + p_rbuf = get_ringbuf(substream); + + start = runtime->dma_addr; + + is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 1 : 0; + + ringbuf_set_initial(aio->cygaud->audio, p_rbuf, is_play, start, + periodsize, bufsize); + + return ret; +} + +static snd_pcm_uframes_t cygnus_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + unsigned int res = 0, cur = 0, base = 0; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + + /* + * Get the offset of the current read (for playack) or write + * index (for capture). Report this value back to the asoc framework. + */ + p_rbuf = get_ringbuf(substream); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + cur = readl(aio->cygaud->audio + p_rbuf->rdaddr); + else + cur = readl(aio->cygaud->audio + p_rbuf->wraddr); + + base = readl(aio->cygaud->audio + p_rbuf->baseaddr); + + /* + * Mask off the MSB of the rdaddr,wraddr and baseaddr + * since MSB is not part of the address + */ + res = (cur & 0x7fffffff) - (base & 0x7fffffff); + + return bytes_to_frames(substream->runtime, res); +} + +static int cygnus_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size; + + size = cygnus_pcm_hw.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + + dev_dbg(rtd->cpu_dai->dev, "%s: size 0x%zx @ %pK\n", + __func__, size, buf->area); + + if (!buf->area) { + dev_err(rtd->cpu_dai->dev, "%s: dma_alloc failed\n", __func__); + return -ENOMEM; + } + buf->bytes = size; + + return 0; +} + + +static const struct snd_pcm_ops cygnus_pcm_ops = { + .open = cygnus_pcm_open, + .close = cygnus_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = cygnus_pcm_hw_params, + .hw_free = cygnus_pcm_hw_free, + .prepare = cygnus_pcm_prepare, + .trigger = cygnus_pcm_trigger, + .pointer = cygnus_pcm_pointer, +}; + +static void cygnus_dma_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + + substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; + if (substream) { + buf = &substream->dma_buffer; + if (buf->area) { + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } + } + + substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; + if (substream) { + buf = &substream->dma_buffer; + if (buf->area) { + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } + } +} + +static int cygnus_dma_new(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + struct snd_pcm *pcm = rtd->pcm; + int ret; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &cygnus_dma_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = DMA_BIT_MASK(32); + + if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { + ret = cygnus_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + return ret; + } + + if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { + ret = cygnus_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) { + cygnus_dma_free_dma_buffers(pcm); + return ret; + } + } + + return 0; +} + +static struct snd_soc_platform_driver cygnus_soc_platform = { + .ops = &cygnus_pcm_ops, + .pcm_new = cygnus_dma_new, + .pcm_free = cygnus_dma_free_dma_buffers, +}; + +int cygnus_soc_platform_register(struct device *dev, + struct cygnus_audio *cygaud) +{ + int rc = 0; + + dev_dbg(dev, "%s Enter\n", __func__); + + rc = devm_request_irq(dev, cygaud->irq_num, cygnus_dma_irq, + IRQF_SHARED, "cygnus-audio", cygaud); + if (rc) { + dev_err(dev, "%s request_irq error %d\n", __func__, rc); + return rc; + } + + rc = snd_soc_register_platform(dev, &cygnus_soc_platform); + if (rc) { + dev_err(dev, "%s failed\n", __func__); + return rc; + } + + return 0; +} + +int cygnus_soc_platform_unregister(struct device *dev) +{ + snd_soc_unregister_platform(dev); + + return 0; +} + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Cygnus ASoC PCM module"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 3/3] ASoC: cygnus: Add Cygnus audio DMA driver @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ray Jui, Scott Branden, Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai Cc: Simran Rai, Lori Hikichi, devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Arun Parameswaran, alsa-devel This patch adds Cygnus audio DMA driver. It supports playback and capture modes and uses ringbuffers for data transfer. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <arunp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 873 insertions(+) create mode 100644 sound/soc/bcm/cygnus-pcm.c diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig index 6a834e1..d528aac 100644 --- a/sound/soc/bcm/Kconfig +++ b/sound/soc/bcm/Kconfig @@ -7,3 +7,12 @@ config SND_BCM2835_SOC_I2S Say Y or M if you want to add support for codecs attached to the BCM2835 I2S interface. You will also need to select the audio interfaces to support below. + +config SND_SOC_CYGNUS + tristate "SoC platform audio for Broadcom Cygnus chips" + depends on ARCH_BCM_CYGNUS || COMPILE_TEST + help + Say Y if you want to add support for ASoC audio on Broadcom + Cygnus chips (bcm958300, bcm958305, bcm911360) + + If you don't know what to do here, say N. \ No newline at end of file diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile index bc816b7..fc739d0 100644 --- a/sound/soc/bcm/Makefile +++ b/sound/soc/bcm/Makefile @@ -3,3 +3,8 @@ snd-soc-bcm2835-i2s-objs := bcm2835-i2s.o obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd-soc-bcm2835-i2s.o +# CYGNUS Platform Support +snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o + +obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + diff --git a/sound/soc/bcm/cygnus-pcm.c b/sound/soc/bcm/cygnus-pcm.c new file mode 100644 index 0000000..23381306 --- /dev/null +++ b/sound/soc/bcm/cygnus-pcm.c @@ -0,0 +1,859 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/debugfs.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "cygnus-ssp.h" + +/* Register offset needed for ASoC PCM module */ + +#define INTH_R5F_STATUS_OFFSET 0x040 +#define INTH_R5F_CLEAR_OFFSET 0x048 +#define INTH_R5F_MASK_SET_OFFSET 0x050 +#define INTH_R5F_MASK_CLEAR_OFFSET 0x054 + +#define BF_REARM_FREE_MARK_OFFSET 0x344 +#define BF_REARM_FULL_MARK_OFFSET 0x348 + +/* Ring Buffer Ctrl Regs --- Start */ +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_RDADDR_REG_BASE */ +#define SRC_RBUF_0_RDADDR_OFFSET 0x500 +#define SRC_RBUF_1_RDADDR_OFFSET 0x518 +#define SRC_RBUF_2_RDADDR_OFFSET 0x530 +#define SRC_RBUF_3_RDADDR_OFFSET 0x548 +#define SRC_RBUF_4_RDADDR_OFFSET 0x560 +#define SRC_RBUF_5_RDADDR_OFFSET 0x578 +#define SRC_RBUF_6_RDADDR_OFFSET 0x590 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_WRADDR_REG_BASE */ +#define SRC_RBUF_0_WRADDR_OFFSET 0x504 +#define SRC_RBUF_1_WRADDR_OFFSET 0x51c +#define SRC_RBUF_2_WRADDR_OFFSET 0x534 +#define SRC_RBUF_3_WRADDR_OFFSET 0x54c +#define SRC_RBUF_4_WRADDR_OFFSET 0x564 +#define SRC_RBUF_5_WRADDR_OFFSET 0x57c +#define SRC_RBUF_6_WRADDR_OFFSET 0x594 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_BASEADDR_REG_BASE */ +#define SRC_RBUF_0_BASEADDR_OFFSET 0x508 +#define SRC_RBUF_1_BASEADDR_OFFSET 0x520 +#define SRC_RBUF_2_BASEADDR_OFFSET 0x538 +#define SRC_RBUF_3_BASEADDR_OFFSET 0x550 +#define SRC_RBUF_4_BASEADDR_OFFSET 0x568 +#define SRC_RBUF_5_BASEADDR_OFFSET 0x580 +#define SRC_RBUF_6_BASEADDR_OFFSET 0x598 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_ENDADDR_REG_BASE */ +#define SRC_RBUF_0_ENDADDR_OFFSET 0x50c +#define SRC_RBUF_1_ENDADDR_OFFSET 0x524 +#define SRC_RBUF_2_ENDADDR_OFFSET 0x53c +#define SRC_RBUF_3_ENDADDR_OFFSET 0x554 +#define SRC_RBUF_4_ENDADDR_OFFSET 0x56c +#define SRC_RBUF_5_ENDADDR_OFFSET 0x584 +#define SRC_RBUF_6_ENDADDR_OFFSET 0x59c + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_FREE_MARK_REG_BASE */ +#define SRC_RBUF_0_FREE_MARK_OFFSET 0x510 +#define SRC_RBUF_1_FREE_MARK_OFFSET 0x528 +#define SRC_RBUF_2_FREE_MARK_OFFSET 0x540 +#define SRC_RBUF_3_FREE_MARK_OFFSET 0x558 +#define SRC_RBUF_4_FREE_MARK_OFFSET 0x570 +#define SRC_RBUF_5_FREE_MARK_OFFSET 0x588 +#define SRC_RBUF_6_FREE_MARK_OFFSET 0x5a0 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_RDADDR_REG_BASE */ +#define DST_RBUF_0_RDADDR_OFFSET 0x5c0 +#define DST_RBUF_1_RDADDR_OFFSET 0x5d8 +#define DST_RBUF_2_RDADDR_OFFSET 0x5f0 +#define DST_RBUF_3_RDADDR_OFFSET 0x608 +#define DST_RBUF_4_RDADDR_OFFSET 0x620 +#define DST_RBUF_5_RDADDR_OFFSET 0x638 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_WRADDR_REG_BASE */ +#define DST_RBUF_0_WRADDR_OFFSET 0x5c4 +#define DST_RBUF_1_WRADDR_OFFSET 0x5dc +#define DST_RBUF_2_WRADDR_OFFSET 0x5f4 +#define DST_RBUF_3_WRADDR_OFFSET 0x60c +#define DST_RBUF_4_WRADDR_OFFSET 0x624 +#define DST_RBUF_5_WRADDR_OFFSET 0x63c + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_BASEADDR_REG_BASE */ +#define DST_RBUF_0_BASEADDR_OFFSET 0x5c8 +#define DST_RBUF_1_BASEADDR_OFFSET 0x5e0 +#define DST_RBUF_2_BASEADDR_OFFSET 0x5f8 +#define DST_RBUF_3_BASEADDR_OFFSET 0x610 +#define DST_RBUF_4_BASEADDR_OFFSET 0x628 +#define DST_RBUF_5_BASEADDR_OFFSET 0x640 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_ENDADDR_REG_BASE */ +#define DST_RBUF_0_ENDADDR_OFFSET 0x5cc +#define DST_RBUF_1_ENDADDR_OFFSET 0x5e4 +#define DST_RBUF_2_ENDADDR_OFFSET 0x5fc +#define DST_RBUF_3_ENDADDR_OFFSET 0x614 +#define DST_RBUF_4_ENDADDR_OFFSET 0x62c +#define DST_RBUF_5_ENDADDR_OFFSET 0x644 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_FULL_MARK_REG_BASE */ +#define DST_RBUF_0_FULL_MARK_OFFSET 0x5d0 +#define DST_RBUF_1_FULL_MARK_OFFSET 0x5e8 +#define DST_RBUF_2_FULL_MARK_OFFSET 0x600 +#define DST_RBUF_3_FULL_MARK_OFFSET 0x618 +#define DST_RBUF_4_FULL_MARK_OFFSET 0x630 +#define DST_RBUF_5_FULL_MARK_OFFSET 0x648 +/* Ring Buffer Ctrl Regs --- End */ + +/* Error Status Regs --- Start */ +/* AUD_FMM_BF_ESR_ESRX_STATUS_REG_BASE */ +#define ESR0_STATUS_OFFSET 0x900 +#define ESR1_STATUS_OFFSET 0x918 +#define ESR2_STATUS_OFFSET 0x930 +#define ESR3_STATUS_OFFSET 0x948 +#define ESR4_STATUS_OFFSET 0x960 + +/* AUD_FMM_BF_ESR_ESRX_STATUS_CLEAR_REG_BASE */ +#define ESR0_STATUS_CLR_OFFSET 0x908 +#define ESR1_STATUS_CLR_OFFSET 0x920 +#define ESR2_STATUS_CLR_OFFSET 0x938 +#define ESR3_STATUS_CLR_OFFSET 0x950 +#define ESR4_STATUS_CLR_OFFSET 0x968 + +/* AUD_FMM_BF_ESR_ESRX_MASK_REG_BASE */ +#define ESR0_MASK_STATUS_OFFSET 0x90c +#define ESR1_MASK_STATUS_OFFSET 0x924 +#define ESR2_MASK_STATUS_OFFSET 0x93c +#define ESR3_MASK_STATUS_OFFSET 0x954 +#define ESR4_MASK_STATUS_OFFSET 0x96c + +/* AUD_FMM_BF_ESR_ESRX_MASK_SET_REG_BASE */ +#define ESR0_MASK_SET_OFFSET 0x910 +#define ESR1_MASK_SET_OFFSET 0x928 +#define ESR2_MASK_SET_OFFSET 0x940 +#define ESR3_MASK_SET_OFFSET 0x958 +#define ESR4_MASK_SET_OFFSET 0x970 + +/* AUD_FMM_BF_ESR_ESRX_MASK_CLEAR_REG_BASE */ +#define ESR0_MASK_CLR_OFFSET 0x914 +#define ESR1_MASK_CLR_OFFSET 0x92c +#define ESR2_MASK_CLR_OFFSET 0x944 +#define ESR3_MASK_CLR_OFFSET 0x95c +#define ESR4_MASK_CLR_OFFSET 0x974 +/* Error Status Regs --- End */ + +#define R5F_ESR0_SHIFT 0 /* esr0 = fifo underflow */ +#define R5F_ESR1_SHIFT 1 /* esr1 = ringbuf underflow */ +#define R5F_ESR2_SHIFT 2 /* esr2 = ringbuf overflow */ +#define R5F_ESR3_SHIFT 3 /* esr3 = freemark */ +#define R5F_ESR4_SHIFT 4 /* esr4 = fullmark */ + + +/* Mask for R5F register. Set all relevant interrupt for playback handler */ +#define ANY_PLAYBACK_IRQ (BIT(R5F_ESR0_SHIFT) | \ + BIT(R5F_ESR1_SHIFT) | \ + BIT(R5F_ESR3_SHIFT)) + +/* Mask for R5F register. Set all relevant interrupt for capture handler */ +#define ANY_CAPTURE_IRQ (BIT(R5F_ESR2_SHIFT) | BIT(R5F_ESR4_SHIFT)) + +/* + * PERIOD_BYTES_MIN is the number of bytes to at which the interrupt will tick. + * This number should be a multiple of 256. Minimum value is 256 + */ +#define PERIOD_BYTES_MIN 0x100 + +static const struct snd_pcm_hardware cygnus_pcm_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + + /* A period is basically an interrupt */ + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = 0x10000, + + /* period_min/max gives range of approx interrupts per buffer */ + .periods_min = 2, + .periods_max = 8, + + /* + * maximum buffer size in bytes = period_bytes_max * periods_max + * We allocate this amount of data for each enabled channel + */ + .buffer_bytes_max = 4 * 0x8000, +}; + +static u64 cygnus_dma_dmamask = DMA_BIT_MASK(32); + +static struct cygnus_aio_port *cygnus_dai_get_dma_data( + struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + + return snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream); +} + +static void ringbuf_set_initial(void __iomem *audio_io, + struct ringbuf_regs *p_rbuf, + bool is_playback, + u32 start, + u32 periodsize, + u32 bufsize) +{ + u32 initial_rd; + u32 initial_wr; + u32 end; + u32 fmark_val; /* free or full mark */ + + p_rbuf->period_bytes = periodsize; + p_rbuf->buf_size = bufsize; + + if (is_playback) { + /* Set the pointers to indicate full (flip uppermost bit) */ + initial_rd = start; + initial_wr = initial_rd ^ BIT(31); + } else { + /* Set the pointers to indicate empty */ + initial_wr = start; + initial_rd = initial_wr; + } + + end = start + bufsize - 1; + + /* + * The interrupt will fire when free/full mark is *exceeded* + * The fmark value must be multiple of PERIOD_BYTES_MIN so set fmark + * to be PERIOD_BYTES_MIN less than the period size. + */ + fmark_val = periodsize - PERIOD_BYTES_MIN; + + writel(start, audio_io + p_rbuf->baseaddr); + writel(end, audio_io + p_rbuf->endaddr); + writel(fmark_val, audio_io + p_rbuf->fmark); + writel(initial_rd, audio_io + p_rbuf->rdaddr); + writel(initial_wr, audio_io + p_rbuf->wraddr); +} + +static int configure_ringbuf_regs(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf; + int status = 0; + + aio = cygnus_dai_get_dma_data(substream); + + /* Map the ssp portnum to a set of ring buffers. */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + p_rbuf = &aio->play_rb_regs; + + switch (aio->portnum) { + case 0: + *p_rbuf = RINGBUF_REG_PLAYBACK(0); + break; + case 1: + *p_rbuf = RINGBUF_REG_PLAYBACK(2); + break; + case 2: + *p_rbuf = RINGBUF_REG_PLAYBACK(4); + break; + case 3: /* SPDIF */ + *p_rbuf = RINGBUF_REG_PLAYBACK(6); + break; + default: + status = -EINVAL; + } + } else { + p_rbuf = &aio->capture_rb_regs; + + switch (aio->portnum) { + case 0: + *p_rbuf = RINGBUF_REG_CAPTURE(0); + break; + case 1: + *p_rbuf = RINGBUF_REG_CAPTURE(2); + break; + case 2: + *p_rbuf = RINGBUF_REG_CAPTURE(4); + break; + default: + status = -EINVAL; + } + } + + return status; +} + +static struct ringbuf_regs *get_ringbuf(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + p_rbuf = &aio->play_rb_regs; + else + p_rbuf = &aio->capture_rb_regs; + + return p_rbuf; +} + +static void enable_intr(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + u32 clear_mask; + + aio = cygnus_dai_get_dma_data(substream); + + /* The port number maps to the bit position to be cleared */ + clear_mask = BIT(aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Clear interrupt status before enabling them */ + writel(clear_mask, aio->cygaud->audio + ESR0_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR1_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR3_STATUS_CLR_OFFSET); + /* Unmask the interrupts of the given port*/ + writel(clear_mask, aio->cygaud->audio + ESR0_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR1_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR3_MASK_CLR_OFFSET); + + writel(ANY_PLAYBACK_IRQ, + aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET); + } else { + writel(clear_mask, aio->cygaud->audio + ESR2_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR4_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR2_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR4_MASK_CLR_OFFSET); + + writel(ANY_CAPTURE_IRQ, + aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET); + } + +} + +static void disable_intr(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + u32 set_mask; + + aio = cygnus_dai_get_dma_data(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s on port %d\n", __func__, aio->portnum); + + /* The port number maps to the bit position to be set */ + set_mask = BIT(aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Mask the interrupts of the given port*/ + writel(set_mask, aio->cygaud->audio + ESR0_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR1_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR3_MASK_SET_OFFSET); + } else { + writel(set_mask, aio->cygaud->audio + ESR2_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR4_MASK_SET_OFFSET); + } + +} + +static int cygnus_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + enable_intr(substream); + break; + + case SNDRV_PCM_TRIGGER_STOP: + disable_intr(substream); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void cygnus_pcm_period_elapsed(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf = NULL; + u32 regval; + + aio = cygnus_dai_get_dma_data(substream); + + p_rbuf = get_ringbuf(substream); + + /* + * If free/full mark interrupt occurs, provide timestamp + * to ALSA and update appropriate idx by period_bytes + */ + snd_pcm_period_elapsed(substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Set the ring buffer to full */ + regval = readl(aio->cygaud->audio + p_rbuf->rdaddr); + regval = regval ^ BIT(31); + writel(regval, aio->cygaud->audio + p_rbuf->wraddr); + } else { + /* Set the ring buffer to empty */ + regval = readl(aio->cygaud->audio + p_rbuf->wraddr); + writel(regval, aio->cygaud->audio + p_rbuf->rdaddr); + } +} + +/* + * ESR0/1/3 status Description + * 0x1 I2S0_out port caused interrupt + * 0x2 I2S1_out port caused interrupt + * 0x4 I2S2_out port caused interrupt + * 0x8 SPDIF_out port caused interrupt + */ +static void handle_playback_irq(struct cygnus_audio *cygaud) +{ + void __iomem *audio_io; + u32 port; + u32 esr_status0, esr_status1, esr_status3; + + audio_io = cygaud->audio; + + /* + * ESR status gets updates with/without interrupts enabled. + * So, check the ESR mask, which provides interrupt enable/ + * disable status and use it to determine which ESR status + * should be serviced. + */ + esr_status0 = readl(audio_io + ESR0_STATUS_OFFSET); + esr_status0 &= ~readl(audio_io + ESR0_MASK_STATUS_OFFSET); + esr_status1 = readl(audio_io + ESR1_STATUS_OFFSET); + esr_status1 &= ~readl(audio_io + ESR1_MASK_STATUS_OFFSET); + esr_status3 = readl(audio_io + ESR3_STATUS_OFFSET); + esr_status3 &= ~readl(audio_io + ESR3_MASK_STATUS_OFFSET); + + for (port = 0; port < CYGNUS_MAX_PLAYBACK_PORTS; port++) { + u32 esrmask = BIT(port); + + /* + * Ringbuffer or FIFO underflow + * If we get this interrupt then, it is also true that we have + * not yet responded to the freemark interrupt. + * Log a debug message. The freemark handler below will + * handle getting everything going again. + */ + if ((esrmask & esr_status1) || (esrmask & esr_status0)) { + dev_dbg(cygaud->dev, + "Underrun: esr0=0x%x, esr1=0x%x esr3=0x%x\n", + esr_status0, esr_status1, esr_status3); + } + + /* + * Freemark is hit. This is the normal interrupt. + * In typical operation the read and write regs will be equal + */ + if (esrmask & esr_status3) { + struct snd_pcm_substream *playstr; + + playstr = cygaud->portinfo[port].play_stream; + cygnus_pcm_period_elapsed(playstr); + } + } + + /* Clear ESR interrupt */ + writel(esr_status0, audio_io + ESR0_STATUS_CLR_OFFSET); + writel(esr_status1, audio_io + ESR1_STATUS_CLR_OFFSET); + writel(esr_status3, audio_io + ESR3_STATUS_CLR_OFFSET); + /* Rearm freemark logic by writing 1 to the correct bit */ + writel(esr_status3, audio_io + BF_REARM_FREE_MARK_OFFSET); +} + +/* + * ESR2/4 status Description + * 0x1 I2S0_in port caused interrupt + * 0x2 I2S1_in port caused interrupt + * 0x4 I2S2_in port caused interrupt + */ +static void handle_capture_irq(struct cygnus_audio *cygaud) +{ + void __iomem *audio_io; + u32 port; + u32 esr_status2, esr_status4; + + audio_io = cygaud->audio; + + /* + * ESR status gets updates with/without interrupts enabled. + * So, check the ESR mask, which provides interrupt enable/ + * disable status and use it to determine which ESR status + * should be serviced. + */ + esr_status2 = readl(audio_io + ESR2_STATUS_OFFSET); + esr_status2 &= ~readl(audio_io + ESR2_MASK_STATUS_OFFSET); + esr_status4 = readl(audio_io + ESR4_STATUS_OFFSET); + esr_status4 &= ~readl(audio_io + ESR4_MASK_STATUS_OFFSET); + + for (port = 0; port < CYGNUS_MAX_CAPTURE_PORTS; port++) { + u32 esrmask = BIT(port); + + /* + * Ringbuffer or FIFO overflow + * If we get this interrupt then, it is also true that we have + * not yet responded to the fullmark interrupt. + * Log a debug message. The fullmark handler below will + * handle getting everything going again. + */ + if (esrmask & esr_status2) + dev_dbg(cygaud->dev, + "Overflow: esr2=0x%x\n", esr_status2); + + if (esrmask & esr_status4) { + struct snd_pcm_substream *capstr; + + capstr = cygaud->portinfo[port].capture_stream; + cygnus_pcm_period_elapsed(capstr); + } + } + + writel(esr_status2, audio_io + ESR2_STATUS_CLR_OFFSET); + writel(esr_status4, audio_io + ESR4_STATUS_CLR_OFFSET); + /* Rearm fullmark logic by writing 1 to the correct bit */ + writel(esr_status4, audio_io + BF_REARM_FULL_MARK_OFFSET); +} + +static irqreturn_t cygnus_dma_irq(int irq, void *data) +{ + u32 r5_status; + struct cygnus_audio *cygaud = data; + + /* + * R5 status bits Description + * 0 ESR0 (playback FIFO interrupt) + * 1 ESR1 (playback rbuf interrupt) + * 2 ESR2 (capture rbuf interrupt) + * 3 ESR3 (Freemark play. interrupt) + * 4 ESR4 (Fullmark capt. interrupt) + */ + r5_status = readl(cygaud->audio + INTH_R5F_STATUS_OFFSET); + + if (!(r5_status & (ANY_PLAYBACK_IRQ | ANY_CAPTURE_IRQ))) + return IRQ_NONE; + + /* If playback interrupt happened */ + if (ANY_PLAYBACK_IRQ & r5_status) { + handle_playback_irq(cygaud); + writel(ANY_PLAYBACK_IRQ & r5_status, + cygaud->audio + INTH_R5F_CLEAR_OFFSET); + } + + /* If capture interrupt happened */ + if (ANY_CAPTURE_IRQ & r5_status) { + handle_capture_irq(cygaud); + writel(ANY_CAPTURE_IRQ & r5_status, + cygaud->audio + INTH_R5F_CLEAR_OFFSET); + } + + return IRQ_HANDLED; +} + +static int cygnus_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + int ret; + + aio = cygnus_dai_get_dma_data(substream); + if (!aio) + return -ENODEV; + + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_soc_set_runtime_hwparams(substream, &cygnus_pcm_hw); + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, PERIOD_BYTES_MIN); + if (ret < 0) + return ret; + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, PERIOD_BYTES_MIN); + if (ret < 0) + return ret; + /* + * Keep track of which substream belongs to which port. + * This info is needed by snd_pcm_period_elapsed() in irq_handler + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + aio->play_stream = substream; + else + aio->capture_stream = substream; + + return 0; +} + +static int cygnus_pcm_close(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + + aio = cygnus_dai_get_dma_data(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + aio->play_stream = NULL; + else + aio->capture_stream = NULL; + + if (!aio->play_stream && !aio->capture_stream) + dev_dbg(rtd->cpu_dai->dev, "freed port %d\n", aio->portnum); + + return 0; +} + +static int cygnus_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + int ret = 0; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + return ret; +} + +static int cygnus_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_pcm_set_runtime_buffer(substream, NULL); + return 0; +} + +static int cygnus_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + unsigned long bufsize, periodsize; + int ret = 0; + bool is_play; + u32 start; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + bufsize = snd_pcm_lib_buffer_bytes(substream); + periodsize = snd_pcm_lib_period_bytes(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s (buf_size %lu) (period_size %lu)\n", + __func__, bufsize, periodsize); + + configure_ringbuf_regs(substream); + + p_rbuf = get_ringbuf(substream); + + start = runtime->dma_addr; + + is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 1 : 0; + + ringbuf_set_initial(aio->cygaud->audio, p_rbuf, is_play, start, + periodsize, bufsize); + + return ret; +} + +static snd_pcm_uframes_t cygnus_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + unsigned int res = 0, cur = 0, base = 0; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + + /* + * Get the offset of the current read (for playack) or write + * index (for capture). Report this value back to the asoc framework. + */ + p_rbuf = get_ringbuf(substream); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + cur = readl(aio->cygaud->audio + p_rbuf->rdaddr); + else + cur = readl(aio->cygaud->audio + p_rbuf->wraddr); + + base = readl(aio->cygaud->audio + p_rbuf->baseaddr); + + /* + * Mask off the MSB of the rdaddr,wraddr and baseaddr + * since MSB is not part of the address + */ + res = (cur & 0x7fffffff) - (base & 0x7fffffff); + + return bytes_to_frames(substream->runtime, res); +} + +static int cygnus_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size; + + size = cygnus_pcm_hw.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + + dev_dbg(rtd->cpu_dai->dev, "%s: size 0x%zx @ %pK\n", + __func__, size, buf->area); + + if (!buf->area) { + dev_err(rtd->cpu_dai->dev, "%s: dma_alloc failed\n", __func__); + return -ENOMEM; + } + buf->bytes = size; + + return 0; +} + + +static const struct snd_pcm_ops cygnus_pcm_ops = { + .open = cygnus_pcm_open, + .close = cygnus_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = cygnus_pcm_hw_params, + .hw_free = cygnus_pcm_hw_free, + .prepare = cygnus_pcm_prepare, + .trigger = cygnus_pcm_trigger, + .pointer = cygnus_pcm_pointer, +}; + +static void cygnus_dma_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + + substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; + if (substream) { + buf = &substream->dma_buffer; + if (buf->area) { + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } + } + + substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; + if (substream) { + buf = &substream->dma_buffer; + if (buf->area) { + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } + } +} + +static int cygnus_dma_new(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + struct snd_pcm *pcm = rtd->pcm; + int ret; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &cygnus_dma_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = DMA_BIT_MASK(32); + + if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { + ret = cygnus_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + return ret; + } + + if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { + ret = cygnus_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) { + cygnus_dma_free_dma_buffers(pcm); + return ret; + } + } + + return 0; +} + +static struct snd_soc_platform_driver cygnus_soc_platform = { + .ops = &cygnus_pcm_ops, + .pcm_new = cygnus_dma_new, + .pcm_free = cygnus_dma_free_dma_buffers, +}; + +int cygnus_soc_platform_register(struct device *dev, + struct cygnus_audio *cygaud) +{ + int rc = 0; + + dev_dbg(dev, "%s Enter\n", __func__); + + rc = devm_request_irq(dev, cygaud->irq_num, cygnus_dma_irq, + IRQF_SHARED, "cygnus-audio", cygaud); + if (rc) { + dev_err(dev, "%s request_irq error %d\n", __func__, rc); + return rc; + } + + rc = snd_soc_register_platform(dev, &cygnus_soc_platform); + if (rc) { + dev_err(dev, "%s failed\n", __func__); + return rc; + } + + return 0; +} + +int cygnus_soc_platform_unregister(struct device *dev) +{ + snd_soc_unregister_platform(dev); + + return 0; +} + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Cygnus ASoC PCM module"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 3/3] ASoC: cygnus: Add Cygnus audio DMA driver @ 2015-11-10 0:17 ` Simran Rai 0 siblings, 0 replies; 21+ messages in thread From: Simran Rai @ 2015-11-10 0:17 UTC (permalink / raw) To: linux-arm-kernel This patch adds Cygnus audio DMA driver. It supports playback and capture modes and uses ringbuffers for data transfer. Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <arunp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 5 + sound/soc/bcm/cygnus-pcm.c | 859 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 873 insertions(+) create mode 100644 sound/soc/bcm/cygnus-pcm.c diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig index 6a834e1..d528aac 100644 --- a/sound/soc/bcm/Kconfig +++ b/sound/soc/bcm/Kconfig @@ -7,3 +7,12 @@ config SND_BCM2835_SOC_I2S Say Y or M if you want to add support for codecs attached to the BCM2835 I2S interface. You will also need to select the audio interfaces to support below. + +config SND_SOC_CYGNUS + tristate "SoC platform audio for Broadcom Cygnus chips" + depends on ARCH_BCM_CYGNUS || COMPILE_TEST + help + Say Y if you want to add support for ASoC audio on Broadcom + Cygnus chips (bcm958300, bcm958305, bcm911360) + + If you don't know what to do here, say N. \ No newline at end of file diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile index bc816b7..fc739d0 100644 --- a/sound/soc/bcm/Makefile +++ b/sound/soc/bcm/Makefile @@ -3,3 +3,8 @@ snd-soc-bcm2835-i2s-objs := bcm2835-i2s.o obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd-soc-bcm2835-i2s.o +# CYGNUS Platform Support +snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o + +obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + diff --git a/sound/soc/bcm/cygnus-pcm.c b/sound/soc/bcm/cygnus-pcm.c new file mode 100644 index 0000000..23381306 --- /dev/null +++ b/sound/soc/bcm/cygnus-pcm.c @@ -0,0 +1,859 @@ +/* + * Copyright (C) 2014-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/debugfs.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "cygnus-ssp.h" + +/* Register offset needed for ASoC PCM module */ + +#define INTH_R5F_STATUS_OFFSET 0x040 +#define INTH_R5F_CLEAR_OFFSET 0x048 +#define INTH_R5F_MASK_SET_OFFSET 0x050 +#define INTH_R5F_MASK_CLEAR_OFFSET 0x054 + +#define BF_REARM_FREE_MARK_OFFSET 0x344 +#define BF_REARM_FULL_MARK_OFFSET 0x348 + +/* Ring Buffer Ctrl Regs --- Start */ +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_RDADDR_REG_BASE */ +#define SRC_RBUF_0_RDADDR_OFFSET 0x500 +#define SRC_RBUF_1_RDADDR_OFFSET 0x518 +#define SRC_RBUF_2_RDADDR_OFFSET 0x530 +#define SRC_RBUF_3_RDADDR_OFFSET 0x548 +#define SRC_RBUF_4_RDADDR_OFFSET 0x560 +#define SRC_RBUF_5_RDADDR_OFFSET 0x578 +#define SRC_RBUF_6_RDADDR_OFFSET 0x590 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_WRADDR_REG_BASE */ +#define SRC_RBUF_0_WRADDR_OFFSET 0x504 +#define SRC_RBUF_1_WRADDR_OFFSET 0x51c +#define SRC_RBUF_2_WRADDR_OFFSET 0x534 +#define SRC_RBUF_3_WRADDR_OFFSET 0x54c +#define SRC_RBUF_4_WRADDR_OFFSET 0x564 +#define SRC_RBUF_5_WRADDR_OFFSET 0x57c +#define SRC_RBUF_6_WRADDR_OFFSET 0x594 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_BASEADDR_REG_BASE */ +#define SRC_RBUF_0_BASEADDR_OFFSET 0x508 +#define SRC_RBUF_1_BASEADDR_OFFSET 0x520 +#define SRC_RBUF_2_BASEADDR_OFFSET 0x538 +#define SRC_RBUF_3_BASEADDR_OFFSET 0x550 +#define SRC_RBUF_4_BASEADDR_OFFSET 0x568 +#define SRC_RBUF_5_BASEADDR_OFFSET 0x580 +#define SRC_RBUF_6_BASEADDR_OFFSET 0x598 + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_ENDADDR_REG_BASE */ +#define SRC_RBUF_0_ENDADDR_OFFSET 0x50c +#define SRC_RBUF_1_ENDADDR_OFFSET 0x524 +#define SRC_RBUF_2_ENDADDR_OFFSET 0x53c +#define SRC_RBUF_3_ENDADDR_OFFSET 0x554 +#define SRC_RBUF_4_ENDADDR_OFFSET 0x56c +#define SRC_RBUF_5_ENDADDR_OFFSET 0x584 +#define SRC_RBUF_6_ENDADDR_OFFSET 0x59c + +/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_FREE_MARK_REG_BASE */ +#define SRC_RBUF_0_FREE_MARK_OFFSET 0x510 +#define SRC_RBUF_1_FREE_MARK_OFFSET 0x528 +#define SRC_RBUF_2_FREE_MARK_OFFSET 0x540 +#define SRC_RBUF_3_FREE_MARK_OFFSET 0x558 +#define SRC_RBUF_4_FREE_MARK_OFFSET 0x570 +#define SRC_RBUF_5_FREE_MARK_OFFSET 0x588 +#define SRC_RBUF_6_FREE_MARK_OFFSET 0x5a0 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_RDADDR_REG_BASE */ +#define DST_RBUF_0_RDADDR_OFFSET 0x5c0 +#define DST_RBUF_1_RDADDR_OFFSET 0x5d8 +#define DST_RBUF_2_RDADDR_OFFSET 0x5f0 +#define DST_RBUF_3_RDADDR_OFFSET 0x608 +#define DST_RBUF_4_RDADDR_OFFSET 0x620 +#define DST_RBUF_5_RDADDR_OFFSET 0x638 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_WRADDR_REG_BASE */ +#define DST_RBUF_0_WRADDR_OFFSET 0x5c4 +#define DST_RBUF_1_WRADDR_OFFSET 0x5dc +#define DST_RBUF_2_WRADDR_OFFSET 0x5f4 +#define DST_RBUF_3_WRADDR_OFFSET 0x60c +#define DST_RBUF_4_WRADDR_OFFSET 0x624 +#define DST_RBUF_5_WRADDR_OFFSET 0x63c + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_BASEADDR_REG_BASE */ +#define DST_RBUF_0_BASEADDR_OFFSET 0x5c8 +#define DST_RBUF_1_BASEADDR_OFFSET 0x5e0 +#define DST_RBUF_2_BASEADDR_OFFSET 0x5f8 +#define DST_RBUF_3_BASEADDR_OFFSET 0x610 +#define DST_RBUF_4_BASEADDR_OFFSET 0x628 +#define DST_RBUF_5_BASEADDR_OFFSET 0x640 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_ENDADDR_REG_BASE */ +#define DST_RBUF_0_ENDADDR_OFFSET 0x5cc +#define DST_RBUF_1_ENDADDR_OFFSET 0x5e4 +#define DST_RBUF_2_ENDADDR_OFFSET 0x5fc +#define DST_RBUF_3_ENDADDR_OFFSET 0x614 +#define DST_RBUF_4_ENDADDR_OFFSET 0x62c +#define DST_RBUF_5_ENDADDR_OFFSET 0x644 + +/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_FULL_MARK_REG_BASE */ +#define DST_RBUF_0_FULL_MARK_OFFSET 0x5d0 +#define DST_RBUF_1_FULL_MARK_OFFSET 0x5e8 +#define DST_RBUF_2_FULL_MARK_OFFSET 0x600 +#define DST_RBUF_3_FULL_MARK_OFFSET 0x618 +#define DST_RBUF_4_FULL_MARK_OFFSET 0x630 +#define DST_RBUF_5_FULL_MARK_OFFSET 0x648 +/* Ring Buffer Ctrl Regs --- End */ + +/* Error Status Regs --- Start */ +/* AUD_FMM_BF_ESR_ESRX_STATUS_REG_BASE */ +#define ESR0_STATUS_OFFSET 0x900 +#define ESR1_STATUS_OFFSET 0x918 +#define ESR2_STATUS_OFFSET 0x930 +#define ESR3_STATUS_OFFSET 0x948 +#define ESR4_STATUS_OFFSET 0x960 + +/* AUD_FMM_BF_ESR_ESRX_STATUS_CLEAR_REG_BASE */ +#define ESR0_STATUS_CLR_OFFSET 0x908 +#define ESR1_STATUS_CLR_OFFSET 0x920 +#define ESR2_STATUS_CLR_OFFSET 0x938 +#define ESR3_STATUS_CLR_OFFSET 0x950 +#define ESR4_STATUS_CLR_OFFSET 0x968 + +/* AUD_FMM_BF_ESR_ESRX_MASK_REG_BASE */ +#define ESR0_MASK_STATUS_OFFSET 0x90c +#define ESR1_MASK_STATUS_OFFSET 0x924 +#define ESR2_MASK_STATUS_OFFSET 0x93c +#define ESR3_MASK_STATUS_OFFSET 0x954 +#define ESR4_MASK_STATUS_OFFSET 0x96c + +/* AUD_FMM_BF_ESR_ESRX_MASK_SET_REG_BASE */ +#define ESR0_MASK_SET_OFFSET 0x910 +#define ESR1_MASK_SET_OFFSET 0x928 +#define ESR2_MASK_SET_OFFSET 0x940 +#define ESR3_MASK_SET_OFFSET 0x958 +#define ESR4_MASK_SET_OFFSET 0x970 + +/* AUD_FMM_BF_ESR_ESRX_MASK_CLEAR_REG_BASE */ +#define ESR0_MASK_CLR_OFFSET 0x914 +#define ESR1_MASK_CLR_OFFSET 0x92c +#define ESR2_MASK_CLR_OFFSET 0x944 +#define ESR3_MASK_CLR_OFFSET 0x95c +#define ESR4_MASK_CLR_OFFSET 0x974 +/* Error Status Regs --- End */ + +#define R5F_ESR0_SHIFT 0 /* esr0 = fifo underflow */ +#define R5F_ESR1_SHIFT 1 /* esr1 = ringbuf underflow */ +#define R5F_ESR2_SHIFT 2 /* esr2 = ringbuf overflow */ +#define R5F_ESR3_SHIFT 3 /* esr3 = freemark */ +#define R5F_ESR4_SHIFT 4 /* esr4 = fullmark */ + + +/* Mask for R5F register. Set all relevant interrupt for playback handler */ +#define ANY_PLAYBACK_IRQ (BIT(R5F_ESR0_SHIFT) | \ + BIT(R5F_ESR1_SHIFT) | \ + BIT(R5F_ESR3_SHIFT)) + +/* Mask for R5F register. Set all relevant interrupt for capture handler */ +#define ANY_CAPTURE_IRQ (BIT(R5F_ESR2_SHIFT) | BIT(R5F_ESR4_SHIFT)) + +/* + * PERIOD_BYTES_MIN is the number of bytes to at which the interrupt will tick. + * This number should be a multiple of 256. Minimum value is 256 + */ +#define PERIOD_BYTES_MIN 0x100 + +static const struct snd_pcm_hardware cygnus_pcm_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + + /* A period is basically an interrupt */ + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = 0x10000, + + /* period_min/max gives range of approx interrupts per buffer */ + .periods_min = 2, + .periods_max = 8, + + /* + * maximum buffer size in bytes = period_bytes_max * periods_max + * We allocate this amount of data for each enabled channel + */ + .buffer_bytes_max = 4 * 0x8000, +}; + +static u64 cygnus_dma_dmamask = DMA_BIT_MASK(32); + +static struct cygnus_aio_port *cygnus_dai_get_dma_data( + struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + + return snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream); +} + +static void ringbuf_set_initial(void __iomem *audio_io, + struct ringbuf_regs *p_rbuf, + bool is_playback, + u32 start, + u32 periodsize, + u32 bufsize) +{ + u32 initial_rd; + u32 initial_wr; + u32 end; + u32 fmark_val; /* free or full mark */ + + p_rbuf->period_bytes = periodsize; + p_rbuf->buf_size = bufsize; + + if (is_playback) { + /* Set the pointers to indicate full (flip uppermost bit) */ + initial_rd = start; + initial_wr = initial_rd ^ BIT(31); + } else { + /* Set the pointers to indicate empty */ + initial_wr = start; + initial_rd = initial_wr; + } + + end = start + bufsize - 1; + + /* + * The interrupt will fire when free/full mark is *exceeded* + * The fmark value must be multiple of PERIOD_BYTES_MIN so set fmark + * to be PERIOD_BYTES_MIN less than the period size. + */ + fmark_val = periodsize - PERIOD_BYTES_MIN; + + writel(start, audio_io + p_rbuf->baseaddr); + writel(end, audio_io + p_rbuf->endaddr); + writel(fmark_val, audio_io + p_rbuf->fmark); + writel(initial_rd, audio_io + p_rbuf->rdaddr); + writel(initial_wr, audio_io + p_rbuf->wraddr); +} + +static int configure_ringbuf_regs(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf; + int status = 0; + + aio = cygnus_dai_get_dma_data(substream); + + /* Map the ssp portnum to a set of ring buffers. */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + p_rbuf = &aio->play_rb_regs; + + switch (aio->portnum) { + case 0: + *p_rbuf = RINGBUF_REG_PLAYBACK(0); + break; + case 1: + *p_rbuf = RINGBUF_REG_PLAYBACK(2); + break; + case 2: + *p_rbuf = RINGBUF_REG_PLAYBACK(4); + break; + case 3: /* SPDIF */ + *p_rbuf = RINGBUF_REG_PLAYBACK(6); + break; + default: + status = -EINVAL; + } + } else { + p_rbuf = &aio->capture_rb_regs; + + switch (aio->portnum) { + case 0: + *p_rbuf = RINGBUF_REG_CAPTURE(0); + break; + case 1: + *p_rbuf = RINGBUF_REG_CAPTURE(2); + break; + case 2: + *p_rbuf = RINGBUF_REG_CAPTURE(4); + break; + default: + status = -EINVAL; + } + } + + return status; +} + +static struct ringbuf_regs *get_ringbuf(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + p_rbuf = &aio->play_rb_regs; + else + p_rbuf = &aio->capture_rb_regs; + + return p_rbuf; +} + +static void enable_intr(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + u32 clear_mask; + + aio = cygnus_dai_get_dma_data(substream); + + /* The port number maps to the bit position to be cleared */ + clear_mask = BIT(aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Clear interrupt status before enabling them */ + writel(clear_mask, aio->cygaud->audio + ESR0_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR1_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR3_STATUS_CLR_OFFSET); + /* Unmask the interrupts of the given port*/ + writel(clear_mask, aio->cygaud->audio + ESR0_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR1_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR3_MASK_CLR_OFFSET); + + writel(ANY_PLAYBACK_IRQ, + aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET); + } else { + writel(clear_mask, aio->cygaud->audio + ESR2_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR4_STATUS_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR2_MASK_CLR_OFFSET); + writel(clear_mask, aio->cygaud->audio + ESR4_MASK_CLR_OFFSET); + + writel(ANY_CAPTURE_IRQ, + aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET); + } + +} + +static void disable_intr(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + u32 set_mask; + + aio = cygnus_dai_get_dma_data(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s on port %d\n", __func__, aio->portnum); + + /* The port number maps to the bit position to be set */ + set_mask = BIT(aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Mask the interrupts of the given port*/ + writel(set_mask, aio->cygaud->audio + ESR0_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR1_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR3_MASK_SET_OFFSET); + } else { + writel(set_mask, aio->cygaud->audio + ESR2_MASK_SET_OFFSET); + writel(set_mask, aio->cygaud->audio + ESR4_MASK_SET_OFFSET); + } + +} + +static int cygnus_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + enable_intr(substream); + break; + + case SNDRV_PCM_TRIGGER_STOP: + disable_intr(substream); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void cygnus_pcm_period_elapsed(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + struct ringbuf_regs *p_rbuf = NULL; + u32 regval; + + aio = cygnus_dai_get_dma_data(substream); + + p_rbuf = get_ringbuf(substream); + + /* + * If free/full mark interrupt occurs, provide timestamp + * to ALSA and update appropriate idx by period_bytes + */ + snd_pcm_period_elapsed(substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* Set the ring buffer to full */ + regval = readl(aio->cygaud->audio + p_rbuf->rdaddr); + regval = regval ^ BIT(31); + writel(regval, aio->cygaud->audio + p_rbuf->wraddr); + } else { + /* Set the ring buffer to empty */ + regval = readl(aio->cygaud->audio + p_rbuf->wraddr); + writel(regval, aio->cygaud->audio + p_rbuf->rdaddr); + } +} + +/* + * ESR0/1/3 status Description + * 0x1 I2S0_out port caused interrupt + * 0x2 I2S1_out port caused interrupt + * 0x4 I2S2_out port caused interrupt + * 0x8 SPDIF_out port caused interrupt + */ +static void handle_playback_irq(struct cygnus_audio *cygaud) +{ + void __iomem *audio_io; + u32 port; + u32 esr_status0, esr_status1, esr_status3; + + audio_io = cygaud->audio; + + /* + * ESR status gets updates with/without interrupts enabled. + * So, check the ESR mask, which provides interrupt enable/ + * disable status and use it to determine which ESR status + * should be serviced. + */ + esr_status0 = readl(audio_io + ESR0_STATUS_OFFSET); + esr_status0 &= ~readl(audio_io + ESR0_MASK_STATUS_OFFSET); + esr_status1 = readl(audio_io + ESR1_STATUS_OFFSET); + esr_status1 &= ~readl(audio_io + ESR1_MASK_STATUS_OFFSET); + esr_status3 = readl(audio_io + ESR3_STATUS_OFFSET); + esr_status3 &= ~readl(audio_io + ESR3_MASK_STATUS_OFFSET); + + for (port = 0; port < CYGNUS_MAX_PLAYBACK_PORTS; port++) { + u32 esrmask = BIT(port); + + /* + * Ringbuffer or FIFO underflow + * If we get this interrupt then, it is also true that we have + * not yet responded to the freemark interrupt. + * Log a debug message. The freemark handler below will + * handle getting everything going again. + */ + if ((esrmask & esr_status1) || (esrmask & esr_status0)) { + dev_dbg(cygaud->dev, + "Underrun: esr0=0x%x, esr1=0x%x esr3=0x%x\n", + esr_status0, esr_status1, esr_status3); + } + + /* + * Freemark is hit. This is the normal interrupt. + * In typical operation the read and write regs will be equal + */ + if (esrmask & esr_status3) { + struct snd_pcm_substream *playstr; + + playstr = cygaud->portinfo[port].play_stream; + cygnus_pcm_period_elapsed(playstr); + } + } + + /* Clear ESR interrupt */ + writel(esr_status0, audio_io + ESR0_STATUS_CLR_OFFSET); + writel(esr_status1, audio_io + ESR1_STATUS_CLR_OFFSET); + writel(esr_status3, audio_io + ESR3_STATUS_CLR_OFFSET); + /* Rearm freemark logic by writing 1 to the correct bit */ + writel(esr_status3, audio_io + BF_REARM_FREE_MARK_OFFSET); +} + +/* + * ESR2/4 status Description + * 0x1 I2S0_in port caused interrupt + * 0x2 I2S1_in port caused interrupt + * 0x4 I2S2_in port caused interrupt + */ +static void handle_capture_irq(struct cygnus_audio *cygaud) +{ + void __iomem *audio_io; + u32 port; + u32 esr_status2, esr_status4; + + audio_io = cygaud->audio; + + /* + * ESR status gets updates with/without interrupts enabled. + * So, check the ESR mask, which provides interrupt enable/ + * disable status and use it to determine which ESR status + * should be serviced. + */ + esr_status2 = readl(audio_io + ESR2_STATUS_OFFSET); + esr_status2 &= ~readl(audio_io + ESR2_MASK_STATUS_OFFSET); + esr_status4 = readl(audio_io + ESR4_STATUS_OFFSET); + esr_status4 &= ~readl(audio_io + ESR4_MASK_STATUS_OFFSET); + + for (port = 0; port < CYGNUS_MAX_CAPTURE_PORTS; port++) { + u32 esrmask = BIT(port); + + /* + * Ringbuffer or FIFO overflow + * If we get this interrupt then, it is also true that we have + * not yet responded to the fullmark interrupt. + * Log a debug message. The fullmark handler below will + * handle getting everything going again. + */ + if (esrmask & esr_status2) + dev_dbg(cygaud->dev, + "Overflow: esr2=0x%x\n", esr_status2); + + if (esrmask & esr_status4) { + struct snd_pcm_substream *capstr; + + capstr = cygaud->portinfo[port].capture_stream; + cygnus_pcm_period_elapsed(capstr); + } + } + + writel(esr_status2, audio_io + ESR2_STATUS_CLR_OFFSET); + writel(esr_status4, audio_io + ESR4_STATUS_CLR_OFFSET); + /* Rearm fullmark logic by writing 1 to the correct bit */ + writel(esr_status4, audio_io + BF_REARM_FULL_MARK_OFFSET); +} + +static irqreturn_t cygnus_dma_irq(int irq, void *data) +{ + u32 r5_status; + struct cygnus_audio *cygaud = data; + + /* + * R5 status bits Description + * 0 ESR0 (playback FIFO interrupt) + * 1 ESR1 (playback rbuf interrupt) + * 2 ESR2 (capture rbuf interrupt) + * 3 ESR3 (Freemark play. interrupt) + * 4 ESR4 (Fullmark capt. interrupt) + */ + r5_status = readl(cygaud->audio + INTH_R5F_STATUS_OFFSET); + + if (!(r5_status & (ANY_PLAYBACK_IRQ | ANY_CAPTURE_IRQ))) + return IRQ_NONE; + + /* If playback interrupt happened */ + if (ANY_PLAYBACK_IRQ & r5_status) { + handle_playback_irq(cygaud); + writel(ANY_PLAYBACK_IRQ & r5_status, + cygaud->audio + INTH_R5F_CLEAR_OFFSET); + } + + /* If capture interrupt happened */ + if (ANY_CAPTURE_IRQ & r5_status) { + handle_capture_irq(cygaud); + writel(ANY_CAPTURE_IRQ & r5_status, + cygaud->audio + INTH_R5F_CLEAR_OFFSET); + } + + return IRQ_HANDLED; +} + +static int cygnus_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + int ret; + + aio = cygnus_dai_get_dma_data(substream); + if (!aio) + return -ENODEV; + + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_soc_set_runtime_hwparams(substream, &cygnus_pcm_hw); + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, PERIOD_BYTES_MIN); + if (ret < 0) + return ret; + + ret = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, PERIOD_BYTES_MIN); + if (ret < 0) + return ret; + /* + * Keep track of which substream belongs to which port. + * This info is needed by snd_pcm_period_elapsed() in irq_handler + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + aio->play_stream = substream; + else + aio->capture_stream = substream; + + return 0; +} + +static int cygnus_pcm_close(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + + aio = cygnus_dai_get_dma_data(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + aio->play_stream = NULL; + else + aio->capture_stream = NULL; + + if (!aio->play_stream && !aio->capture_stream) + dev_dbg(rtd->cpu_dai->dev, "freed port %d\n", aio->portnum); + + return 0; +} + +static int cygnus_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + int ret = 0; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + return ret; +} + +static int cygnus_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct cygnus_aio_port *aio; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + snd_pcm_set_runtime_buffer(substream, NULL); + return 0; +} + +static int cygnus_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct cygnus_aio_port *aio; + unsigned long bufsize, periodsize; + int ret = 0; + bool is_play; + u32 start; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum); + + bufsize = snd_pcm_lib_buffer_bytes(substream); + periodsize = snd_pcm_lib_period_bytes(substream); + + dev_dbg(rtd->cpu_dai->dev, "%s (buf_size %lu) (period_size %lu)\n", + __func__, bufsize, periodsize); + + configure_ringbuf_regs(substream); + + p_rbuf = get_ringbuf(substream); + + start = runtime->dma_addr; + + is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 1 : 0; + + ringbuf_set_initial(aio->cygaud->audio, p_rbuf, is_play, start, + periodsize, bufsize); + + return ret; +} + +static snd_pcm_uframes_t cygnus_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct cygnus_aio_port *aio; + unsigned int res = 0, cur = 0, base = 0; + struct ringbuf_regs *p_rbuf = NULL; + + aio = cygnus_dai_get_dma_data(substream); + + /* + * Get the offset of the current read (for playack) or write + * index (for capture). Report this value back to the asoc framework. + */ + p_rbuf = get_ringbuf(substream); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + cur = readl(aio->cygaud->audio + p_rbuf->rdaddr); + else + cur = readl(aio->cygaud->audio + p_rbuf->wraddr); + + base = readl(aio->cygaud->audio + p_rbuf->baseaddr); + + /* + * Mask off the MSB of the rdaddr,wraddr and baseaddr + * since MSB is not part of the address + */ + res = (cur & 0x7fffffff) - (base & 0x7fffffff); + + return bytes_to_frames(substream->runtime, res); +} + +static int cygnus_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size; + + size = cygnus_pcm_hw.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + + dev_dbg(rtd->cpu_dai->dev, "%s: size 0x%zx @ %pK\n", + __func__, size, buf->area); + + if (!buf->area) { + dev_err(rtd->cpu_dai->dev, "%s: dma_alloc failed\n", __func__); + return -ENOMEM; + } + buf->bytes = size; + + return 0; +} + + +static const struct snd_pcm_ops cygnus_pcm_ops = { + .open = cygnus_pcm_open, + .close = cygnus_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = cygnus_pcm_hw_params, + .hw_free = cygnus_pcm_hw_free, + .prepare = cygnus_pcm_prepare, + .trigger = cygnus_pcm_trigger, + .pointer = cygnus_pcm_pointer, +}; + +static void cygnus_dma_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + + substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; + if (substream) { + buf = &substream->dma_buffer; + if (buf->area) { + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } + } + + substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; + if (substream) { + buf = &substream->dma_buffer; + if (buf->area) { + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } + } +} + +static int cygnus_dma_new(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + struct snd_pcm *pcm = rtd->pcm; + int ret; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &cygnus_dma_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = DMA_BIT_MASK(32); + + if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { + ret = cygnus_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + return ret; + } + + if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { + ret = cygnus_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) { + cygnus_dma_free_dma_buffers(pcm); + return ret; + } + } + + return 0; +} + +static struct snd_soc_platform_driver cygnus_soc_platform = { + .ops = &cygnus_pcm_ops, + .pcm_new = cygnus_dma_new, + .pcm_free = cygnus_dma_free_dma_buffers, +}; + +int cygnus_soc_platform_register(struct device *dev, + struct cygnus_audio *cygaud) +{ + int rc = 0; + + dev_dbg(dev, "%s Enter\n", __func__); + + rc = devm_request_irq(dev, cygaud->irq_num, cygnus_dma_irq, + IRQF_SHARED, "cygnus-audio", cygaud); + if (rc) { + dev_err(dev, "%s request_irq error %d\n", __func__, rc); + return rc; + } + + rc = snd_soc_register_platform(dev, &cygnus_soc_platform); + if (rc) { + dev_err(dev, "%s failed\n", __func__); + return rc; + } + + return 0; +} + +int cygnus_soc_platform_unregister(struct device *dev) +{ + snd_soc_unregister_platform(dev); + + return 0; +} + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Cygnus ASoC PCM module"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 21+ messages in thread
end of thread, other threads:[~2015-12-02 10:46 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-10 0:17 [PATCH v4 0/3]ASoC: cygnus: Add audio support for Broadcom Cygnus SoC Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-10 0:17 ` [PATCH v4 1/3] ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-10 0:17 ` [PATCH v4 2/3] ASoC: cygnus: Add Cygnus audio DAI driver Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-22 13:44 ` Mark Brown
2015-11-22 13:44 ` Mark Brown
2015-11-22 13:44 ` Mark Brown
2015-12-02 2:17 ` Simran Rai
2015-12-02 2:17 ` Simran Rai
2015-12-02 2:17 ` Simran Rai
[not found] ` <565E54D2.50806-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-12-02 10:45 ` Mark Brown
2015-12-02 10:45 ` Mark Brown
2015-12-02 10:45 ` Mark Brown
2015-11-10 0:17 ` [PATCH v4 3/3] ASoC: cygnus: Add Cygnus audio DMA driver Simran Rai
2015-11-10 0:17 ` Simran Rai
2015-11-10 0:17 ` Simran Rai
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.