All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martyn Welch <martyn.welch-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
To: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/3] Device tree binding documentation for chromeos-firmware
Date: Wed, 02 Dec 2015 16:49:59 +0000	[thread overview]
Message-ID: <565F2137.609@collabora.co.uk> (raw)
In-Reply-To: <20151202151552.GA11101@rob-hp-laptop>



On 02/12/15 15:15, Rob Herring wrote:
> On Tue, Dec 01, 2015 at 07:12:49PM +0000, Martyn Welch wrote:
>> This patch adds documentation for the chromeos-firmware binding.
>>
>> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
>> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
>> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
>> Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Signed-off-by: Martyn Welch <martyn.welch-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
>> ---
>>   .../devicetree/bindings/misc/chromeos-firmware.txt | 27 ++++++++++++++++++++++
>
> bindings/firmware/ please.
>

OK.

>>   1 file changed, 27 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/misc/chromeos-firmware.txt
>>
>> diff --git a/Documentation/devicetree/bindings/misc/chromeos-firmware.txt b/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
>> new file mode 100644
>> index 0000000..8240611
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
>> @@ -0,0 +1,27 @@
>> +Device-Tree bindings for chromeos-firmware.c.
>
> Perhaps a bit more description what this is.
>
> What aspect of this is firmware? How does this relate to the EC?
>

With respect to write-protect, this line is the write protection for the 
flash which holds the bootloader.

For the developer-switch and recovery-switch, I understand that pulling 
these lines low result in the stock firmware forcing the device to boot 
into developer mode and recovery mode respectively. The device I have no 
longer runs the stock firmware, so I'm not able to confirm this, though 
I am able to drive these lines.

As far as I'm aware, none of these are related to the operation of the EC.

Will update the binding documentation.

>> +
>> +Required properties:
>> +	- compatible = "google,gpio-firmware";
>
> No versions?
>

I'm not aware of any and would rather not start inventing ones that 
aren't already there.

>> +
>> +Each signal is represented as a sub-node of "chromeos_firmware":
>> +Subnode properties:
>> +
>> +	- gpios: OF device-tree gpio specification.
>> +
>> +Example nodes:
>> +
>> +	chromeos_firmware {
>
> This should go under /firmware

Ok, will do.

>
>> +		compatible = "google,gpio-firmware";
>> +
>> +		write-protect {
>
> You need to define what are valid sub nodes. The example is not
> documentation.
>

Ok

>> +			gpios = <&gpx3 0 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		developer-switch {
>> +			gpios = <&gpx1 3 GPIO_ACTIVE_HIGH>;
>> +		};
>> +
>> +		recovery-switch {
>> +			gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
>> +		};
>> +	};
>> --
>> 2.1.4
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Martyn Welch <martyn.welch@collabora.co.uk>
To: Rob Herring <robh@kernel.org>
Cc: Olof Johansson <olof@lixom.net>,
	linux-kernel@vger.kernel.org, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 1/3] Device tree binding documentation for chromeos-firmware
Date: Wed, 02 Dec 2015 16:49:59 +0000	[thread overview]
Message-ID: <565F2137.609@collabora.co.uk> (raw)
In-Reply-To: <20151202151552.GA11101@rob-hp-laptop>



On 02/12/15 15:15, Rob Herring wrote:
> On Tue, Dec 01, 2015 at 07:12:49PM +0000, Martyn Welch wrote:
>> This patch adds documentation for the chromeos-firmware binding.
>>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Pawel Moll <pawel.moll@arm.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
>> Cc: Kumar Gala <galak@codeaurora.org>
>> Cc: devicetree@vger.kernel.org
>> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
>> ---
>>   .../devicetree/bindings/misc/chromeos-firmware.txt | 27 ++++++++++++++++++++++
>
> bindings/firmware/ please.
>

OK.

>>   1 file changed, 27 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/misc/chromeos-firmware.txt
>>
>> diff --git a/Documentation/devicetree/bindings/misc/chromeos-firmware.txt b/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
>> new file mode 100644
>> index 0000000..8240611
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
>> @@ -0,0 +1,27 @@
>> +Device-Tree bindings for chromeos-firmware.c.
>
> Perhaps a bit more description what this is.
>
> What aspect of this is firmware? How does this relate to the EC?
>

With respect to write-protect, this line is the write protection for the 
flash which holds the bootloader.

For the developer-switch and recovery-switch, I understand that pulling 
these lines low result in the stock firmware forcing the device to boot 
into developer mode and recovery mode respectively. The device I have no 
longer runs the stock firmware, so I'm not able to confirm this, though 
I am able to drive these lines.

As far as I'm aware, none of these are related to the operation of the EC.

Will update the binding documentation.

>> +
>> +Required properties:
>> +	- compatible = "google,gpio-firmware";
>
> No versions?
>

I'm not aware of any and would rather not start inventing ones that 
aren't already there.

>> +
>> +Each signal is represented as a sub-node of "chromeos_firmware":
>> +Subnode properties:
>> +
>> +	- gpios: OF device-tree gpio specification.
>> +
>> +Example nodes:
>> +
>> +	chromeos_firmware {
>
> This should go under /firmware

Ok, will do.

>
>> +		compatible = "google,gpio-firmware";
>> +
>> +		write-protect {
>
> You need to define what are valid sub nodes. The example is not
> documentation.
>

Ok

>> +			gpios = <&gpx3 0 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		developer-switch {
>> +			gpios = <&gpx1 3 GPIO_ACTIVE_HIGH>;
>> +		};
>> +
>> +		recovery-switch {
>> +			gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
>> +		};
>> +	};
>> --
>> 2.1.4
>>

  reply	other threads:[~2015-12-02 16:49 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-01 19:12 Add support for Chrome OS firmware signals Martyn Welch
2015-12-01 19:12 ` [PATCH 1/3] Device tree binding documentation for chromeos-firmware Martyn Welch
2015-12-02 15:15   ` Rob Herring
2015-12-02 16:49     ` Martyn Welch [this message]
2015-12-02 16:49       ` Martyn Welch
2015-12-02 18:44       ` Rob Herring
     [not found]         ` <CAL_JsqLhoEc9M=ZUgqL1_ZFKVN+1UfL=h-mWUdri0O_bqZyf_g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-02 21:47           ` Martyn Welch
2015-12-02 21:47             ` Martyn Welch
2015-12-03 10:14     ` Martyn Welch
2015-12-03 10:14       ` Martyn Welch
2015-12-03 15:08       ` Rob Herring
     [not found]         ` <CAL_JsqJGk5_Nk7joSHfJXxcVrpHDBbawY=nPOrOiraWinuka4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-03 16:11           ` Martyn Welch
2015-12-03 16:11             ` Martyn Welch
2015-12-01 19:12 ` [PATCH 2/3] Add support for monitoring Chrome OS firmware signals Martyn Welch
2015-12-01 20:19   ` [PATCH v2] " Martyn Welch
2015-12-02  6:08     ` Jeremiah Mahler
2015-12-02  9:39       ` Martyn Welch
2015-12-02 10:07       ` [PATCH v3] " Martyn Welch
     [not found] ` <1448997171-7064-1-git-send-email-martyn.welch-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2015-12-01 19:12   ` [PATCH 3/3] Addition of binding for firmware signals on peach-pi Martyn Welch
2015-12-01 19:12     ` Martyn Welch
2015-12-01 19:12     ` Martyn Welch
2015-12-01 23:51     ` Krzysztof Kozlowski
2015-12-01 23:51       ` Krzysztof Kozlowski
2015-12-02  9:36       ` Martyn Welch
2015-12-02  9:36         ` Martyn Welch
2015-12-03  0:10         ` Krzysztof Kozlowski
2015-12-03  0:10           ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=565F2137.609@collabora.co.uk \
    --to=martyn.welch-zgy8ohtn/8ppycu2f3hruq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.