From: Markus Reichl <m.reichl@fivetechno.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Thomas Abraham <thomas.ab@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Mike Turquette <mturquette@linaro.org>,
Kukjin Kim <kgene.kim@samsung.com>, Kukjin Kim <kgene@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Ben Gamari <ben@smart-cactus.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>,
Kevin Hilman <khilman@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Anand Moon <linux.amoon@gmail.com>,
linux-pm@vger.kernel.org, Tomasz Figa <tomasz.figa@gmail.com>,
linux-kernel@vger.kernel.org,
Chanwoo Choi <cw00.choi@samsung.com>,
Tobias Jakobi <tjakobi@math.uni-bielefeld.de>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v3 0/10] cpufreq: add generic cpufreq driver support for Exynos542x/5800 platforms
Date: Mon, 7 Dec 2015 16:36:21 +0100 [thread overview]
Message-ID: <5665A775.9040707@fivetechno.de> (raw)
In-Reply-To: <1449250235-9613-1-git-send-email-b.zolnierkie@samsung.com>
Hi,
I have tested this patch set on Odroid-XU4 and get:
[ 2.140821] cpu cpu0: Looking up cpu-cluster.1-supply from device tree
[ 2.142780] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 2.146858] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.161574] cpu cpu4: Looking up cpu-cluster.0-supply from device tree
[ 2.163277] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
[ 2.167263] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.180092] arm_big_little: bL_cpufreq_register: Registered platform driver: dt-bl
cpufreq stays in performance mode and does not change down from highest frequency.
Had the same behaviour with Ben Gamari's patch.
Thanks,
--
Markus
Am 04.12.2015 um 18:30 schrieb Bartlomiej Zolnierkiewicz:
> Hi,
>
> This patch series adds generic arm_big_little_dt cpufreq driver
> support for Exynos542x/5800 (using the new CPU clock type which
> allows it). It also:
> - enhances arm_big_little[_dt] driver with CPU cluster regulator
> support
> - adds CPU clock configuration data and CPU operating points
> setup for Exynos542x/5800
> - adds CPU cluster regulator supplies for Exynos542x/5800 boards
>
> This patch series has been tested on Exynos5422 based ODROID-XU3
> Lite board.
>
> Please note that this is not a final version of the patchset.
> I just wanted to push out current work-in-progress patches that
> integrate changes from Anand, Ben and me.
>
> TODO:
> - porting the Exynos542x/5800 support over cpufreq-dt
>
> Depends on:
> - next-20151124 branch of linux-next kernel tree
>
> Changes since v2:
> - ported over next-20151124 branch
> - integrated missing CLK_RECALC_NEW_RATES flags fix to patch #3
> (from Anand Moon)
> - added regulator supply properties for ODROID-XU3 Lite and
> ODROID-XU4 in patch #2
> - ported CPU OPPs to operating-points-v2 (from Ben Gamari)
> - added "ARM: dts: Exynos5422: fix OPP tables" patch (from Ben
> Gamari)
> - added "cpufreq: arm-big-little: accept operating-points-v2
> nodes" patch (from Ben Gamari)
> - renamed OPP nodes as opp@<opp-hz>
>
> Changes since v1:
> - added CPU cluster regulator supply properties to
> exynos5420-arndale-octa.dts, exynos5420-peach-pit.dts,
> exynos5420-smdk5420.dts and exynos5800-peach-pi.dts
>
> Changes over Thomas' original v12 code:
> - split Exynos5420 and Exynos5800 support
> - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c
> - disabled cpufreq if big.LITTLE switcher support is enabled
> - enhanced arm_big_little[_dt] driver with CPU cluster regulator
> support
> - fixed CPU clock configuration data for Exynos5800
> - fixed CPU operating points setup for Exynos5800
> - added CPU cluster regulator supplies for ODROID-XU3 board
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (4):
> cpufreq: arm_big_little: add cluster regulator support
> ARM: dts: Exynos5420/5800: add cluster regulator supply properties
> clk: samsung: exynos5800: fix cpu clock configuration data
> ARM: dts: Exynos5800: fix CPU OPP
>
> Ben Gamari (2):
> ARM: dts: Exynos5422: fix OPP tables
> cpufreq: arm-big-little: accept operating-points-v2 nodes
>
> Thomas Abraham (4):
> clk: samsung: exynos5420: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos5420: add CPU OPP and regulator supply property
> ARM: Exynos: use generic cpufreq driver for Exynos5420
> ARM: Exynos: use generic cpufreq driver for Exynos5800
>
> .../bindings/cpufreq/arm_big_little_dt.txt | 4 +
> arch/arm/boot/dts/exynos5420-arndale-octa.dts | 8 +
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 +
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 8 +
> arch/arm/boot/dts/exynos5420.dtsi | 122 ++++++++++++++
> arch/arm/boot/dts/exynos5422-cpus.dtsi | 10 ++
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 8 +
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 +
> arch/arm/boot/dts/exynos5800.dtsi | 165 +++++++++++++++++++
> arch/arm/mach-exynos/exynos.c | 8 +
> drivers/clk/samsung/clk-exynos5420.c | 88 ++++++++++-
> drivers/cpufreq/arm_big_little.c | 175 +++++++++++++++++----
> drivers/cpufreq/arm_big_little_dt.c | 12 +-
> include/dt-bindings/clock/exynos5420.h | 2 +
> 16 files changed, 608 insertions(+), 34 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: m.reichl@fivetechno.de (Markus Reichl)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/10] cpufreq: add generic cpufreq driver support for Exynos542x/5800 platforms
Date: Mon, 7 Dec 2015 16:36:21 +0100 [thread overview]
Message-ID: <5665A775.9040707@fivetechno.de> (raw)
In-Reply-To: <1449250235-9613-1-git-send-email-b.zolnierkie@samsung.com>
Hi,
I have tested this patch set on Odroid-XU4 and get:
[ 2.140821] cpu cpu0: Looking up cpu-cluster.1-supply from device tree
[ 2.142780] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 2.146858] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.161574] cpu cpu4: Looking up cpu-cluster.0-supply from device tree
[ 2.163277] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
[ 2.167263] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.180092] arm_big_little: bL_cpufreq_register: Registered platform driver: dt-bl
cpufreq stays in performance mode and does not change down from highest frequency.
Had the same behaviour with Ben Gamari's patch.
Thanks,
--
Markus
Am 04.12.2015 um 18:30 schrieb Bartlomiej Zolnierkiewicz:
> Hi,
>
> This patch series adds generic arm_big_little_dt cpufreq driver
> support for Exynos542x/5800 (using the new CPU clock type which
> allows it). It also:
> - enhances arm_big_little[_dt] driver with CPU cluster regulator
> support
> - adds CPU clock configuration data and CPU operating points
> setup for Exynos542x/5800
> - adds CPU cluster regulator supplies for Exynos542x/5800 boards
>
> This patch series has been tested on Exynos5422 based ODROID-XU3
> Lite board.
>
> Please note that this is not a final version of the patchset.
> I just wanted to push out current work-in-progress patches that
> integrate changes from Anand, Ben and me.
>
> TODO:
> - porting the Exynos542x/5800 support over cpufreq-dt
>
> Depends on:
> - next-20151124 branch of linux-next kernel tree
>
> Changes since v2:
> - ported over next-20151124 branch
> - integrated missing CLK_RECALC_NEW_RATES flags fix to patch #3
> (from Anand Moon)
> - added regulator supply properties for ODROID-XU3 Lite and
> ODROID-XU4 in patch #2
> - ported CPU OPPs to operating-points-v2 (from Ben Gamari)
> - added "ARM: dts: Exynos5422: fix OPP tables" patch (from Ben
> Gamari)
> - added "cpufreq: arm-big-little: accept operating-points-v2
> nodes" patch (from Ben Gamari)
> - renamed OPP nodes as opp@<opp-hz>
>
> Changes since v1:
> - added CPU cluster regulator supply properties to
> exynos5420-arndale-octa.dts, exynos5420-peach-pit.dts,
> exynos5420-smdk5420.dts and exynos5800-peach-pi.dts
>
> Changes over Thomas' original v12 code:
> - split Exynos5420 and Exynos5800 support
> - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c
> - disabled cpufreq if big.LITTLE switcher support is enabled
> - enhanced arm_big_little[_dt] driver with CPU cluster regulator
> support
> - fixed CPU clock configuration data for Exynos5800
> - fixed CPU operating points setup for Exynos5800
> - added CPU cluster regulator supplies for ODROID-XU3 board
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (4):
> cpufreq: arm_big_little: add cluster regulator support
> ARM: dts: Exynos5420/5800: add cluster regulator supply properties
> clk: samsung: exynos5800: fix cpu clock configuration data
> ARM: dts: Exynos5800: fix CPU OPP
>
> Ben Gamari (2):
> ARM: dts: Exynos5422: fix OPP tables
> cpufreq: arm-big-little: accept operating-points-v2 nodes
>
> Thomas Abraham (4):
> clk: samsung: exynos5420: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos5420: add CPU OPP and regulator supply property
> ARM: Exynos: use generic cpufreq driver for Exynos5420
> ARM: Exynos: use generic cpufreq driver for Exynos5800
>
> .../bindings/cpufreq/arm_big_little_dt.txt | 4 +
> arch/arm/boot/dts/exynos5420-arndale-octa.dts | 8 +
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 +
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 8 +
> arch/arm/boot/dts/exynos5420.dtsi | 122 ++++++++++++++
> arch/arm/boot/dts/exynos5422-cpus.dtsi | 10 ++
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 8 +
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 +
> arch/arm/boot/dts/exynos5800.dtsi | 165 +++++++++++++++++++
> arch/arm/mach-exynos/exynos.c | 8 +
> drivers/clk/samsung/clk-exynos5420.c | 88 ++++++++++-
> drivers/cpufreq/arm_big_little.c | 175 +++++++++++++++++----
> drivers/cpufreq/arm_big_little_dt.c | 12 +-
> include/dt-bindings/clock/exynos5420.h | 2 +
> 16 files changed, 608 insertions(+), 34 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: Markus Reichl <m.reichl@fivetechno.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Thomas Abraham <thomas.ab@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Mike Turquette <mturquette@linaro.org>,
Kukjin Kim <kgene.kim@samsung.com>, Kukjin Kim <kgene@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Ben Gamari <ben@smart-cactus.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>,
Lukasz Majewski <l.majewski@samsung.com>,
Heiko Stuebner <heiko@sntech.de>,
Chanwoo Choi <cw00.choi@samsung.com>,
Kevin Hilman <khilman@linaro.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Tobias Jakobi <tjakobi@math.uni-bielefeld.de>,
Anand Moon <linux.amoon@gmail.com>,
linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 0/10] cpufreq: add generic cpufreq driver support for Exynos542x/5800 platforms
Date: Mon, 7 Dec 2015 16:36:21 +0100 [thread overview]
Message-ID: <5665A775.9040707@fivetechno.de> (raw)
In-Reply-To: <1449250235-9613-1-git-send-email-b.zolnierkie@samsung.com>
Hi,
I have tested this patch set on Odroid-XU4 and get:
[ 2.140821] cpu cpu0: Looking up cpu-cluster.1-supply from device tree
[ 2.142780] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 2.146858] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.161574] cpu cpu4: Looking up cpu-cluster.0-supply from device tree
[ 2.163277] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
[ 2.167263] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.180092] arm_big_little: bL_cpufreq_register: Registered platform driver: dt-bl
cpufreq stays in performance mode and does not change down from highest frequency.
Had the same behaviour with Ben Gamari's patch.
Thanks,
--
Markus
Am 04.12.2015 um 18:30 schrieb Bartlomiej Zolnierkiewicz:
> Hi,
>
> This patch series adds generic arm_big_little_dt cpufreq driver
> support for Exynos542x/5800 (using the new CPU clock type which
> allows it). It also:
> - enhances arm_big_little[_dt] driver with CPU cluster regulator
> support
> - adds CPU clock configuration data and CPU operating points
> setup for Exynos542x/5800
> - adds CPU cluster regulator supplies for Exynos542x/5800 boards
>
> This patch series has been tested on Exynos5422 based ODROID-XU3
> Lite board.
>
> Please note that this is not a final version of the patchset.
> I just wanted to push out current work-in-progress patches that
> integrate changes from Anand, Ben and me.
>
> TODO:
> - porting the Exynos542x/5800 support over cpufreq-dt
>
> Depends on:
> - next-20151124 branch of linux-next kernel tree
>
> Changes since v2:
> - ported over next-20151124 branch
> - integrated missing CLK_RECALC_NEW_RATES flags fix to patch #3
> (from Anand Moon)
> - added regulator supply properties for ODROID-XU3 Lite and
> ODROID-XU4 in patch #2
> - ported CPU OPPs to operating-points-v2 (from Ben Gamari)
> - added "ARM: dts: Exynos5422: fix OPP tables" patch (from Ben
> Gamari)
> - added "cpufreq: arm-big-little: accept operating-points-v2
> nodes" patch (from Ben Gamari)
> - renamed OPP nodes as opp@<opp-hz>
>
> Changes since v1:
> - added CPU cluster regulator supply properties to
> exynos5420-arndale-octa.dts, exynos5420-peach-pit.dts,
> exynos5420-smdk5420.dts and exynos5800-peach-pi.dts
>
> Changes over Thomas' original v12 code:
> - split Exynos5420 and Exynos5800 support
> - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c
> - disabled cpufreq if big.LITTLE switcher support is enabled
> - enhanced arm_big_little[_dt] driver with CPU cluster regulator
> support
> - fixed CPU clock configuration data for Exynos5800
> - fixed CPU operating points setup for Exynos5800
> - added CPU cluster regulator supplies for ODROID-XU3 board
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (4):
> cpufreq: arm_big_little: add cluster regulator support
> ARM: dts: Exynos5420/5800: add cluster regulator supply properties
> clk: samsung: exynos5800: fix cpu clock configuration data
> ARM: dts: Exynos5800: fix CPU OPP
>
> Ben Gamari (2):
> ARM: dts: Exynos5422: fix OPP tables
> cpufreq: arm-big-little: accept operating-points-v2 nodes
>
> Thomas Abraham (4):
> clk: samsung: exynos5420: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos5420: add CPU OPP and regulator supply property
> ARM: Exynos: use generic cpufreq driver for Exynos5420
> ARM: Exynos: use generic cpufreq driver for Exynos5800
>
> .../bindings/cpufreq/arm_big_little_dt.txt | 4 +
> arch/arm/boot/dts/exynos5420-arndale-octa.dts | 8 +
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 +
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 8 +
> arch/arm/boot/dts/exynos5420.dtsi | 122 ++++++++++++++
> arch/arm/boot/dts/exynos5422-cpus.dtsi | 10 ++
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 8 +
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 +
> arch/arm/boot/dts/exynos5800.dtsi | 165 +++++++++++++++++++
> arch/arm/mach-exynos/exynos.c | 8 +
> drivers/clk/samsung/clk-exynos5420.c | 88 ++++++++++-
> drivers/cpufreq/arm_big_little.c | 175 +++++++++++++++++----
> drivers/cpufreq/arm_big_little_dt.c | 12 +-
> include/dt-bindings/clock/exynos5420.h | 2 +
> 16 files changed, 608 insertions(+), 34 deletions(-)
>
next prev parent reply other threads:[~2015-12-07 15:36 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 17:30 [PATCH v3 0/10] cpufreq: add generic cpufreq driver support for Exynos542x/5800 platforms Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 01/10] cpufreq: arm_big_little: add cluster regulator support Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 02/10] ARM: dts: Exynos5420/5800: add cluster regulator supply properties Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 03/10] clk: samsung: exynos5420: add cpu clock configuration data and instantiate cpu clock Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-07 15:23 ` Sylwester Nawrocki
2015-12-07 15:23 ` Sylwester Nawrocki
2015-12-04 17:30 ` [PATCH v3 04/10] ARM: dts: Exynos5420: add CPU OPP and regulator supply property Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 05/10] ARM: Exynos: use generic cpufreq driver for Exynos5420 Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 06/10] clk: samsung: exynos5800: fix cpu clock configuration data Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-07 15:25 ` Sylwester Nawrocki
2015-12-07 15:25 ` Sylwester Nawrocki
2015-12-04 17:30 ` [PATCH v3 07/10] ARM: dts: Exynos5800: fix CPU OPP Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 08/10] ARM: dts: Exynos5422: fix OPP tables Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 09/10] ARM: Exynos: use generic cpufreq driver for Exynos5800 Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` [PATCH v3 10/10] cpufreq: arm-big-little: accept operating-points-v2 nodes Bartlomiej Zolnierkiewicz
2015-12-04 17:30 ` Bartlomiej Zolnierkiewicz
2015-12-05 3:54 ` [PATCH v3 0/10] cpufreq: add generic cpufreq driver support for Exynos542x/5800 platforms Viresh Kumar
2015-12-05 3:54 ` Viresh Kumar
2015-12-05 7:49 ` Bartlomiej Zolnierkiewicz
2015-12-05 7:49 ` Bartlomiej Zolnierkiewicz
2015-12-06 2:26 ` Viresh Kumar
2015-12-06 2:26 ` Viresh Kumar
2015-12-06 2:26 ` Viresh Kumar
2015-12-07 15:36 ` Markus Reichl [this message]
2015-12-07 15:36 ` Markus Reichl
2015-12-07 15:36 ` Markus Reichl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5665A775.9040707@fivetechno.de \
--to=m.reichl@fivetechno.de \
--cc=b.zolnierkie@samsung.com \
--cc=ben@smart-cactus.org \
--cc=cw00.choi@samsung.com \
--cc=heiko@sntech.de \
--cc=javier@osg.samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=kgene@kernel.org \
--cc=khilman@linaro.org \
--cc=l.majewski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux.amoon@gmail.com \
--cc=mturquette@linaro.org \
--cc=s.nawrocki@samsung.com \
--cc=thomas.ab@samsung.com \
--cc=tjakobi@math.uni-bielefeld.de \
--cc=tomasz.figa@gmail.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.