From: peter.ujfalusi@ti.com (Peter Ujfalusi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] ARM: DTS: da850: eDMA new bindings and MMC/SPI DMA support
Date: Wed, 9 Dec 2015 09:19:15 +0200 [thread overview]
Message-ID: <5667D5F3.80503@ti.com> (raw)
In-Reply-To: <1449237210-16381-1-git-send-email-peter.ujfalusi@ti.com>
Sekhar,
On 12/04/2015 03:53 PM, Peter Ujfalusi wrote:
> Hi,
>
> Switch to use the new eDMA bindings and enable DMA for MMC0, SPI1.
> Add node for MMC1.
Can you hold on this one for a bit since the eDMA bindings might change still.
>
> Regards,
> Peter
> ---
> Peter Ujfalusi (6):
> ARM: DTS: da850: fix edma0 reg space
> ARM: DTS: da850: Use the new DT bindings for the eDMA3
> ARM: DTS: da850: Enable eDMA1
> ARM: DTS: da850: Enable DMA use for MMC0
> ARM: DTS: da850: Add node for mmc1
> ARM: DTS: da850: Enable DMA for SPI1
>
> arch/arm/boot/dts/da850-enbw-cmc.dts | 9 ++++++
> arch/arm/boot/dts/da850-evm.dts | 9 ++++++
> arch/arm/boot/dts/da850.dtsi | 59 ++++++++++++++++++++++++++++++++----
> 3 files changed, 71 insertions(+), 6 deletions(-)
>
--
P?ter
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: nsekhar@ti.com
Cc: khilman@deeprootsystems.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/6] ARM: DTS: da850: eDMA new bindings and MMC/SPI DMA support
Date: Wed, 9 Dec 2015 09:19:15 +0200 [thread overview]
Message-ID: <5667D5F3.80503@ti.com> (raw)
In-Reply-To: <1449237210-16381-1-git-send-email-peter.ujfalusi@ti.com>
Sekhar,
On 12/04/2015 03:53 PM, Peter Ujfalusi wrote:
> Hi,
>
> Switch to use the new eDMA bindings and enable DMA for MMC0, SPI1.
> Add node for MMC1.
Can you hold on this one for a bit since the eDMA bindings might change still.
>
> Regards,
> Peter
> ---
> Peter Ujfalusi (6):
> ARM: DTS: da850: fix edma0 reg space
> ARM: DTS: da850: Use the new DT bindings for the eDMA3
> ARM: DTS: da850: Enable eDMA1
> ARM: DTS: da850: Enable DMA use for MMC0
> ARM: DTS: da850: Add node for mmc1
> ARM: DTS: da850: Enable DMA for SPI1
>
> arch/arm/boot/dts/da850-enbw-cmc.dts | 9 ++++++
> arch/arm/boot/dts/da850-evm.dts | 9 ++++++
> arch/arm/boot/dts/da850.dtsi | 59 ++++++++++++++++++++++++++++++++----
> 3 files changed, 71 insertions(+), 6 deletions(-)
>
--
Péter
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nsekhar@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<khilman@deeprootsystems.com>
Subject: Re: [PATCH 0/6] ARM: DTS: da850: eDMA new bindings and MMC/SPI DMA support
Date: Wed, 9 Dec 2015 09:19:15 +0200 [thread overview]
Message-ID: <5667D5F3.80503@ti.com> (raw)
In-Reply-To: <1449237210-16381-1-git-send-email-peter.ujfalusi@ti.com>
Sekhar,
On 12/04/2015 03:53 PM, Peter Ujfalusi wrote:
> Hi,
>
> Switch to use the new eDMA bindings and enable DMA for MMC0, SPI1.
> Add node for MMC1.
Can you hold on this one for a bit since the eDMA bindings might change still.
>
> Regards,
> Peter
> ---
> Peter Ujfalusi (6):
> ARM: DTS: da850: fix edma0 reg space
> ARM: DTS: da850: Use the new DT bindings for the eDMA3
> ARM: DTS: da850: Enable eDMA1
> ARM: DTS: da850: Enable DMA use for MMC0
> ARM: DTS: da850: Add node for mmc1
> ARM: DTS: da850: Enable DMA for SPI1
>
> arch/arm/boot/dts/da850-enbw-cmc.dts | 9 ++++++
> arch/arm/boot/dts/da850-evm.dts | 9 ++++++
> arch/arm/boot/dts/da850.dtsi | 59 ++++++++++++++++++++++++++++++++----
> 3 files changed, 71 insertions(+), 6 deletions(-)
>
--
Péter
next prev parent reply other threads:[~2015-12-09 7:19 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 13:53 [PATCH 0/6] ARM: DTS: da850: eDMA new bindings and MMC/SPI DMA support Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` [PATCH 1/6] ARM: DTS: da850: fix edma0 reg space Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` [PATCH 2/6] ARM: DTS: da850: Use the new DT bindings for the eDMA3 Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-15 9:38 ` Sekhar Nori
2015-12-15 9:38 ` Sekhar Nori
2015-12-15 9:38 ` Sekhar Nori
2015-12-15 11:44 ` Peter Ujfalusi
2015-12-15 11:44 ` Peter Ujfalusi
2015-12-15 11:44 ` Peter Ujfalusi
2015-12-15 13:48 ` Sekhar Nori
2015-12-15 13:48 ` Sekhar Nori
2015-12-15 13:48 ` Sekhar Nori
2015-12-15 14:05 ` Peter Ujfalusi
2015-12-15 14:05 ` Peter Ujfalusi
2015-12-15 14:05 ` Peter Ujfalusi
2015-12-15 15:20 ` Sekhar Nori
2015-12-15 15:20 ` Sekhar Nori
2015-12-15 15:20 ` Sekhar Nori
2015-12-04 13:53 ` [PATCH 3/6] ARM: DTS: da850: Enable eDMA1 Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` [PATCH 4/6] ARM: DTS: da850: Enable DMA use for MMC0 Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` [PATCH 5/6] ARM: DTS: da850: Add node for mmc1 Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` [PATCH 6/6] ARM: DTS: da850: Enable DMA for SPI1 Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-04 13:53 ` Peter Ujfalusi
2015-12-09 7:19 ` Peter Ujfalusi [this message]
2015-12-09 7:19 ` [PATCH 0/6] ARM: DTS: da850: eDMA new bindings and MMC/SPI DMA support Peter Ujfalusi
2015-12-09 7:19 ` Peter Ujfalusi
2015-12-09 7:52 ` Sekhar Nori
2015-12-09 7:52 ` Sekhar Nori
2015-12-09 7:52 ` Sekhar Nori
2015-12-10 12:20 ` Sushaanth Srirangapathi
2015-12-10 12:20 ` Sushaanth Srirangapathi
2015-12-10 12:20 ` Sushaanth Srirangapathi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5667D5F3.80503@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.