* [PATCH 0/3] pinmux support for Broadcom NSP SOC
@ 2015-11-20 17:55 ` Yendapally Reddy Dhananjaya Reddy
0 siblings, 0 replies; 6+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2015-11-20 17:55 UTC (permalink / raw)
To: Linus Walleij, Ray Jui, Scott Branden, Jon Mason
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
linux-kernel, linux-gpio, linux-arm-kernel,
bcm-kernel-feedback-list, Yendapally Reddy Dhananjaya Reddy
This patchset contains the pinmux support for the Broadcom's
Northstar Plus (NSP) SOC.
The first patch provides the documentation details and the
second patch contains the driver details. The third patch
contains the enable method.
This patchset has been tested on NSP bcm958625HR board.
This patchset is based on v4.4.0-rc1 and is available from github
repo: https://github.com/Broadcom/cygnus-linux.git
branch: nsp-pinmux-v1
Yendapally Reddy Dhananjaya Reddy (3):
pinctrl: Broadcom NSP pinctrl device tree bindings
pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
ARM: dts: enable pinctrl for Broadcom NSP
.../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++
arch/arm/boot/dts/bcm-nsp.dtsi | 7 +
arch/arm/boot/dts/bcm958625k.dts | 9 +
drivers/pinctrl/bcm/Kconfig | 13 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++
6 files changed, 759 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
--
2.1.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 0/3] pinmux support for Broadcom NSP SOC
@ 2015-11-20 17:55 ` Yendapally Reddy Dhananjaya Reddy
0 siblings, 0 replies; 6+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2015-11-20 17:55 UTC (permalink / raw)
To: linux-arm-kernel
This patchset contains the pinmux support for the Broadcom's
Northstar Plus (NSP) SOC.
The first patch provides the documentation details and the
second patch contains the driver details. The third patch
contains the enable method.
This patchset has been tested on NSP bcm958625HR board.
This patchset is based on v4.4.0-rc1 and is available from github
repo: https://github.com/Broadcom/cygnus-linux.git
branch: nsp-pinmux-v1
Yendapally Reddy Dhananjaya Reddy (3):
pinctrl: Broadcom NSP pinctrl device tree bindings
pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
ARM: dts: enable pinctrl for Broadcom NSP
.../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++
arch/arm/boot/dts/bcm-nsp.dtsi | 7 +
arch/arm/boot/dts/bcm958625k.dts | 9 +
drivers/pinctrl/bcm/Kconfig | 13 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++
6 files changed, 759 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
--
2.1.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 0/3] pinmux support for Broadcom NSP SOC
@ 2015-11-20 17:55 ` Yendapally Reddy Dhananjaya Reddy
0 siblings, 0 replies; 6+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2015-11-20 17:55 UTC (permalink / raw)
To: Linus Walleij, Ray Jui, Scott Branden, Jon Mason
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
linux-kernel, linux-gpio, linux-arm-kernel,
bcm-kernel-feedback-list, Yendapally Reddy Dhananjaya Reddy
This patchset contains the pinmux support for the Broadcom's
Northstar Plus (NSP) SOC.
The first patch provides the documentation details and the
second patch contains the driver details. The third patch
contains the enable method.
This patchset has been tested on NSP bcm958625HR board.
This patchset is based on v4.4.0-rc1 and is available from github
repo: https://github.com/Broadcom/cygnus-linux.git
branch: nsp-pinmux-v1
Yendapally Reddy Dhananjaya Reddy (3):
pinctrl: Broadcom NSP pinctrl device tree bindings
pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
ARM: dts: enable pinctrl for Broadcom NSP
.../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++
arch/arm/boot/dts/bcm-nsp.dtsi | 7 +
arch/arm/boot/dts/bcm958625k.dts | 9 +
drivers/pinctrl/bcm/Kconfig | 13 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++
6 files changed, 759 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
--
2.1.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/3] pinmux support for Broadcom NSP SOC
2015-11-20 17:55 ` Yendapally Reddy Dhananjaya Reddy
(?)
@ 2015-12-10 22:55 ` Ray Jui
-1 siblings, 0 replies; 6+ messages in thread
From: Ray Jui @ 2015-12-10 22:55 UTC (permalink / raw)
To: Yendapally Reddy Dhananjaya Reddy, Linus Walleij, Scott Branden,
Jon Mason
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
linux-kernel, linux-gpio, linux-arm-kernel,
bcm-kernel-feedback-list
Hi,
On 11/20/2015 9:55 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> This patchset contains the pinmux support for the Broadcom's
> Northstar Plus (NSP) SOC.
>
> The first patch provides the documentation details and the
> second patch contains the driver details. The third patch
> contains the enable method.
>
> This patchset has been tested on NSP bcm958625HR board.
> This patchset is based on v4.4.0-rc1 and is available from github
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch: nsp-pinmux-v1
>
> Yendapally Reddy Dhananjaya Reddy (3):
> pinctrl: Broadcom NSP pinctrl device tree bindings
> pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
> ARM: dts: enable pinctrl for Broadcom NSP
>
> .../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++
> arch/arm/boot/dts/bcm-nsp.dtsi | 7 +
> arch/arm/boot/dts/bcm958625k.dts | 9 +
> drivers/pinctrl/bcm/Kconfig | 13 +
> drivers/pinctrl/bcm/Makefile | 1 +
> drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++
> 6 files changed, 759 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
> create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
>
This entire patch set looks good to me.
Reviewed-by: Ray Jui <rjui@broadcom.com>
Thanks,
Ray
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 0/3] pinmux support for Broadcom NSP SOC
@ 2015-12-10 22:55 ` Ray Jui
0 siblings, 0 replies; 6+ messages in thread
From: Ray Jui @ 2015-12-10 22:55 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On 11/20/2015 9:55 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> This patchset contains the pinmux support for the Broadcom's
> Northstar Plus (NSP) SOC.
>
> The first patch provides the documentation details and the
> second patch contains the driver details. The third patch
> contains the enable method.
>
> This patchset has been tested on NSP bcm958625HR board.
> This patchset is based on v4.4.0-rc1 and is available from github
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch: nsp-pinmux-v1
>
> Yendapally Reddy Dhananjaya Reddy (3):
> pinctrl: Broadcom NSP pinctrl device tree bindings
> pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
> ARM: dts: enable pinctrl for Broadcom NSP
>
> .../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++
> arch/arm/boot/dts/bcm-nsp.dtsi | 7 +
> arch/arm/boot/dts/bcm958625k.dts | 9 +
> drivers/pinctrl/bcm/Kconfig | 13 +
> drivers/pinctrl/bcm/Makefile | 1 +
> drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++
> 6 files changed, 759 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
> create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
>
This entire patch set looks good to me.
Reviewed-by: Ray Jui <rjui@broadcom.com>
Thanks,
Ray
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/3] pinmux support for Broadcom NSP SOC
@ 2015-12-10 22:55 ` Ray Jui
0 siblings, 0 replies; 6+ messages in thread
From: Ray Jui @ 2015-12-10 22:55 UTC (permalink / raw)
To: Yendapally Reddy Dhananjaya Reddy, Linus Walleij, Scott Branden,
Jon Mason
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
linux-kernel, linux-gpio, linux-arm-kernel,
bcm-kernel-feedback-list
Hi,
On 11/20/2015 9:55 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> This patchset contains the pinmux support for the Broadcom's
> Northstar Plus (NSP) SOC.
>
> The first patch provides the documentation details and the
> second patch contains the driver details. The third patch
> contains the enable method.
>
> This patchset has been tested on NSP bcm958625HR board.
> This patchset is based on v4.4.0-rc1 and is available from github
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch: nsp-pinmux-v1
>
> Yendapally Reddy Dhananjaya Reddy (3):
> pinctrl: Broadcom NSP pinctrl device tree bindings
> pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
> ARM: dts: enable pinctrl for Broadcom NSP
>
> .../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++
> arch/arm/boot/dts/bcm-nsp.dtsi | 7 +
> arch/arm/boot/dts/bcm958625k.dts | 9 +
> drivers/pinctrl/bcm/Kconfig | 13 +
> drivers/pinctrl/bcm/Makefile | 1 +
> drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++
> 6 files changed, 759 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
> create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
>
This entire patch set looks good to me.
Reviewed-by: Ray Jui <rjui@broadcom.com>
Thanks,
Ray
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-12-10 22:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-20 17:55 [PATCH 0/3] pinmux support for Broadcom NSP SOC Yendapally Reddy Dhananjaya Reddy
2015-11-20 17:55 ` Yendapally Reddy Dhananjaya Reddy
2015-11-20 17:55 ` Yendapally Reddy Dhananjaya Reddy
2015-12-10 22:55 ` Ray Jui
2015-12-10 22:55 ` Ray Jui
2015-12-10 22:55 ` Ray Jui
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.