All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Murzin <vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
To: arnd-r2nGTMty4D4@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
	daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
	u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	afaerber-l3A5Bk7waGM@public.gmane.org,
	mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: Mark.Rutland-5wv7dgnIgG8@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Pawel.Moll-5wv7dgnIgG8@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	jslaby-AlSwsSmVLrQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v1 09/10] ARM: dts: introduce MPS2 AN385/AN386
Date: Wed, 23 Dec 2015 09:33:46 +0000	[thread overview]
Message-ID: <567A6A7A.7080400@arm.com> (raw)
In-Reply-To: <1449048790-25859-10-git-send-email-vladimir.murzin-5wv7dgnIgG8@public.gmane.org>

I'd very appreciate some feedback on this (and following) patch from DT
camp, so I could incorporate them in the next attempt after merge window
closed.

Merry Christmas!
Vladimir

On 02/12/15 09:33, Vladimir Murzin wrote:
> Application Notes 385 and 386 shares the same memory map and features
> except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386
> is supplied with Cortex-M4.
> 
> Signed-off-by: Vladimir Murzin <vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
> ---
>  arch/arm/boot/dts/Makefile       |    1 +
>  arch/arm/boot/dts/mps2-an385.dts |   90 +++++++++++++++
>  arch/arm/boot/dts/mps2.dtsi      |  227 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 318 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mps2-an385.dts
>  create mode 100644 arch/arm/boot/dts/mps2.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..4ef3720 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_MMP) += \
>  dtb-$(CONFIG_MACH_MESON8B) += \
>  	meson8b-mxq.dtb \
>  	meson8b-odroidc1.dtb
> +dtb-$(CONFIG_ARCH_MPS2) += mps2-an385.dtb
>  dtb-$(CONFIG_ARCH_MOXART) += \
>  	moxart-uc7112lx.dtb
>  dtb-$(CONFIG_SOC_IMX1) += \
> diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
> new file mode 100644
> index 0000000..ddb03d3
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2-an385.dts
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "mps2.dtsi"
> +
> +/ {
> +	model = "ARM MPS2 Application Note 385/386";
> +	compatible = "arm,mps2";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		bootargs = "init=/sbin/init earlycon";
> +		stdout-path = "serial0:9600n8";
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x21000000 0x1000000>;
> +	};
> +
> +	ethernet@40200000 {
> +		compatible = "smsc,lan9220", "smsc,lan9115";
> +		reg = <0x40200000 0x10000>;
> +		interrupts = <13>;
> +		interrupt-parent = <&nvic>;
> +		smsc,irq-active-high;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&timer0 {
> +	status = "okay";
> +};
> +
> +&timer1 {
> +	status = "okay";
> +};
> +
> +&wdt {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
> new file mode 100644
> index 0000000..5d2c539
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2.dtsi
> @@ -0,0 +1,227 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armv7-m.dtsi"
> +
> +/ {
> +	oscclk0: clk-osc0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	oscclk1: clk-osc1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24576000>;
> +	};
> +
> +	oscclk2: clk-osc2 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	cfgclk: clk-cfg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <5000000>;
> +	};
> +
> +	spicfgclk: clk-spicfg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <75000000>;
> +	};
> +
> +	sysclk: clk-sys {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	audmclk: clk-audm {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk1>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	audsclk: clk-auds {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk1>;
> +		#clock-cells = <0>;
> +		clock-div = <8>;
> +		clock-mult = <1>;
> +	};
> +
> +	spiclcd: clk-cpiclcd {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	spicon: clk-spicon {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	i2cclcd: clk-i2cclcd {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	i2caud: clk-i2caud {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		apb {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x40000000 0x10000>;
> +
> +			timer0: mps2-timer0@0 {
> +				compatible = "arm,mps2-timer";
> +				reg = <0x0 0x1000>;
> +				interrupts = <8>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			timer1: mps2-timer1@1000 {
> +				compatible = "arm,mps2-timer";
> +				reg = <0x1000 0x1000>;
> +				interrupts = <9>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			timer2: dual-timer@2000 {
> +				compatible = "arm,sp804";
> +				reg = <0x2000 0x1000>;
> +				clocks = <&sysclk>;
> +				interrupts = <10>;
> +				status = "disabled";
> +			};
> +
> +
> +			uart0: serial@4000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x4000 0x1000>;
> +				interrupts = <0 1 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			uart1: serial@5000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x5000 0x1000>;
> +				interrupts = <2 3 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			uart2: serial@6000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x6000 0x1000>;
> +				interrupts = <4 5 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			wdt: watchdog@8000 {
> +				compatible = "arm,sp805", "arm,primecell";
> +				arm,primecell-periphid = <0x00141805>;
> +				reg = <0x8000 0x1000>;
> +				interrupts = <0>;
> +				clocks = <&sysclk>;
> +				clock-names = "apb_pclk";
> +				status = "disabled";
> +			};
> +		};
> +
> +		fpgaio {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x40028000 0x10>;
> +
> +			led@0 {
> +				compatible = "register-bit-led";
> +				offset = <0x0>;
> +				mask = <0x01>;
> +				label = "userled:0";
> +				linux,default-trigger = "heartbeat";
> +				default-state = "on";
> +			};
> +
> +			led@1 {
> +				compatible = "register-bit-led";
> +				offset = <0x0>;
> +				mask = <0x02>;
> +				label = "userled:1";
> +				linux,default-trigger = "usr";
> +				default-state = "off";
> +			};
> +		};
> +	};
> +};
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: vladimir.murzin@arm.com (Vladimir Murzin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 09/10] ARM: dts: introduce MPS2 AN385/AN386
Date: Wed, 23 Dec 2015 09:33:46 +0000	[thread overview]
Message-ID: <567A6A7A.7080400@arm.com> (raw)
In-Reply-To: <1449048790-25859-10-git-send-email-vladimir.murzin@arm.com>

I'd very appreciate some feedback on this (and following) patch from DT
camp, so I could incorporate them in the next attempt after merge window
closed.

Merry Christmas!
Vladimir

On 02/12/15 09:33, Vladimir Murzin wrote:
> Application Notes 385 and 386 shares the same memory map and features
> except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386
> is supplied with Cortex-M4.
> 
> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
> ---
>  arch/arm/boot/dts/Makefile       |    1 +
>  arch/arm/boot/dts/mps2-an385.dts |   90 +++++++++++++++
>  arch/arm/boot/dts/mps2.dtsi      |  227 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 318 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mps2-an385.dts
>  create mode 100644 arch/arm/boot/dts/mps2.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..4ef3720 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_MMP) += \
>  dtb-$(CONFIG_MACH_MESON8B) += \
>  	meson8b-mxq.dtb \
>  	meson8b-odroidc1.dtb
> +dtb-$(CONFIG_ARCH_MPS2) += mps2-an385.dtb
>  dtb-$(CONFIG_ARCH_MOXART) += \
>  	moxart-uc7112lx.dtb
>  dtb-$(CONFIG_SOC_IMX1) += \
> diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
> new file mode 100644
> index 0000000..ddb03d3
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2-an385.dts
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin@arm.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "mps2.dtsi"
> +
> +/ {
> +	model = "ARM MPS2 Application Note 385/386";
> +	compatible = "arm,mps2";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		bootargs = "init=/sbin/init earlycon";
> +		stdout-path = "serial0:9600n8";
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x21000000 0x1000000>;
> +	};
> +
> +	ethernet at 40200000 {
> +		compatible = "smsc,lan9220", "smsc,lan9115";
> +		reg = <0x40200000 0x10000>;
> +		interrupts = <13>;
> +		interrupt-parent = <&nvic>;
> +		smsc,irq-active-high;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&timer0 {
> +	status = "okay";
> +};
> +
> +&timer1 {
> +	status = "okay";
> +};
> +
> +&wdt {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
> new file mode 100644
> index 0000000..5d2c539
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2.dtsi
> @@ -0,0 +1,227 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin@arm.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armv7-m.dtsi"
> +
> +/ {
> +	oscclk0: clk-osc0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	oscclk1: clk-osc1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24576000>;
> +	};
> +
> +	oscclk2: clk-osc2 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	cfgclk: clk-cfg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <5000000>;
> +	};
> +
> +	spicfgclk: clk-spicfg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <75000000>;
> +	};
> +
> +	sysclk: clk-sys {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	audmclk: clk-audm {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk1>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	audsclk: clk-auds {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk1>;
> +		#clock-cells = <0>;
> +		clock-div = <8>;
> +		clock-mult = <1>;
> +	};
> +
> +	spiclcd: clk-cpiclcd {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	spicon: clk-spicon {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	i2cclcd: clk-i2cclcd {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	i2caud: clk-i2caud {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		apb {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x40000000 0x10000>;
> +
> +			timer0: mps2-timer0 at 0 {
> +				compatible = "arm,mps2-timer";
> +				reg = <0x0 0x1000>;
> +				interrupts = <8>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			timer1: mps2-timer1 at 1000 {
> +				compatible = "arm,mps2-timer";
> +				reg = <0x1000 0x1000>;
> +				interrupts = <9>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			timer2: dual-timer at 2000 {
> +				compatible = "arm,sp804";
> +				reg = <0x2000 0x1000>;
> +				clocks = <&sysclk>;
> +				interrupts = <10>;
> +				status = "disabled";
> +			};
> +
> +
> +			uart0: serial at 4000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x4000 0x1000>;
> +				interrupts = <0 1 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			uart1: serial at 5000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x5000 0x1000>;
> +				interrupts = <2 3 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			uart2: serial at 6000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x6000 0x1000>;
> +				interrupts = <4 5 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			wdt: watchdog at 8000 {
> +				compatible = "arm,sp805", "arm,primecell";
> +				arm,primecell-periphid = <0x00141805>;
> +				reg = <0x8000 0x1000>;
> +				interrupts = <0>;
> +				clocks = <&sysclk>;
> +				clock-names = "apb_pclk";
> +				status = "disabled";
> +			};
> +		};
> +
> +		fpgaio {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x40028000 0x10>;
> +
> +			led at 0 {
> +				compatible = "register-bit-led";
> +				offset = <0x0>;
> +				mask = <0x01>;
> +				label = "userled:0";
> +				linux,default-trigger = "heartbeat";
> +				default-state = "on";
> +			};
> +
> +			led at 1 {
> +				compatible = "register-bit-led";
> +				offset = <0x0>;
> +				mask = <0x02>;
> +				label = "userled:1";
> +				linux,default-trigger = "usr";
> +				default-state = "off";
> +			};
> +		};
> +	};
> +};
> 

WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Murzin <vladimir.murzin@arm.com>
To: arnd@arndb.de, linux@arm.linux.org.uk,
	gregkh@linuxfoundation.org, daniel.lezcano@linaro.org,
	tglx@linutronix.de, u.kleine-koenig@pengutronix.de,
	afaerber@suse.de, mcoquelin.stm32@gmail.com
Cc: Mark.Rutland@arm.com, devicetree@vger.kernel.org,
	Pawel.Moll@arm.com, ijc+devicetree@hellion.org.uk,
	linux-api@vger.kernel.org, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, linux-serial@vger.kernel.org,
	galak@codeaurora.org, jslaby@suse.cz,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v1 09/10] ARM: dts: introduce MPS2 AN385/AN386
Date: Wed, 23 Dec 2015 09:33:46 +0000	[thread overview]
Message-ID: <567A6A7A.7080400@arm.com> (raw)
In-Reply-To: <1449048790-25859-10-git-send-email-vladimir.murzin@arm.com>

I'd very appreciate some feedback on this (and following) patch from DT
camp, so I could incorporate them in the next attempt after merge window
closed.

Merry Christmas!
Vladimir

On 02/12/15 09:33, Vladimir Murzin wrote:
> Application Notes 385 and 386 shares the same memory map and features
> except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386
> is supplied with Cortex-M4.
> 
> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
> ---
>  arch/arm/boot/dts/Makefile       |    1 +
>  arch/arm/boot/dts/mps2-an385.dts |   90 +++++++++++++++
>  arch/arm/boot/dts/mps2.dtsi      |  227 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 318 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mps2-an385.dts
>  create mode 100644 arch/arm/boot/dts/mps2.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..4ef3720 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_MMP) += \
>  dtb-$(CONFIG_MACH_MESON8B) += \
>  	meson8b-mxq.dtb \
>  	meson8b-odroidc1.dtb
> +dtb-$(CONFIG_ARCH_MPS2) += mps2-an385.dtb
>  dtb-$(CONFIG_ARCH_MOXART) += \
>  	moxart-uc7112lx.dtb
>  dtb-$(CONFIG_SOC_IMX1) += \
> diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
> new file mode 100644
> index 0000000..ddb03d3
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2-an385.dts
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin@arm.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "mps2.dtsi"
> +
> +/ {
> +	model = "ARM MPS2 Application Note 385/386";
> +	compatible = "arm,mps2";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		bootargs = "init=/sbin/init earlycon";
> +		stdout-path = "serial0:9600n8";
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x21000000 0x1000000>;
> +	};
> +
> +	ethernet@40200000 {
> +		compatible = "smsc,lan9220", "smsc,lan9115";
> +		reg = <0x40200000 0x10000>;
> +		interrupts = <13>;
> +		interrupt-parent = <&nvic>;
> +		smsc,irq-active-high;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&timer0 {
> +	status = "okay";
> +};
> +
> +&timer1 {
> +	status = "okay";
> +};
> +
> +&wdt {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
> new file mode 100644
> index 0000000..5d2c539
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2.dtsi
> @@ -0,0 +1,227 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin@arm.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armv7-m.dtsi"
> +
> +/ {
> +	oscclk0: clk-osc0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	oscclk1: clk-osc1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24576000>;
> +	};
> +
> +	oscclk2: clk-osc2 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	cfgclk: clk-cfg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <5000000>;
> +	};
> +
> +	spicfgclk: clk-spicfg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <75000000>;
> +	};
> +
> +	sysclk: clk-sys {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	audmclk: clk-audm {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk1>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	audsclk: clk-auds {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk1>;
> +		#clock-cells = <0>;
> +		clock-div = <8>;
> +		clock-mult = <1>;
> +	};
> +
> +	spiclcd: clk-cpiclcd {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	spicon: clk-spicon {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	i2cclcd: clk-i2cclcd {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	i2caud: clk-i2caud {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&oscclk0>;
> +		#clock-cells = <0>;
> +		clock-div = <2>;
> +		clock-mult = <1>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		apb {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x40000000 0x10000>;
> +
> +			timer0: mps2-timer0@0 {
> +				compatible = "arm,mps2-timer";
> +				reg = <0x0 0x1000>;
> +				interrupts = <8>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			timer1: mps2-timer1@1000 {
> +				compatible = "arm,mps2-timer";
> +				reg = <0x1000 0x1000>;
> +				interrupts = <9>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			timer2: dual-timer@2000 {
> +				compatible = "arm,sp804";
> +				reg = <0x2000 0x1000>;
> +				clocks = <&sysclk>;
> +				interrupts = <10>;
> +				status = "disabled";
> +			};
> +
> +
> +			uart0: serial@4000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x4000 0x1000>;
> +				interrupts = <0 1 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			uart1: serial@5000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x5000 0x1000>;
> +				interrupts = <2 3 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			uart2: serial@6000 {
> +				compatible = "arm,mps2-uart";
> +				reg = <0x6000 0x1000>;
> +				interrupts = <4 5 12>;
> +				clocks = <&sysclk>;
> +				status = "disabled";
> +			};
> +
> +			wdt: watchdog@8000 {
> +				compatible = "arm,sp805", "arm,primecell";
> +				arm,primecell-periphid = <0x00141805>;
> +				reg = <0x8000 0x1000>;
> +				interrupts = <0>;
> +				clocks = <&sysclk>;
> +				clock-names = "apb_pclk";
> +				status = "disabled";
> +			};
> +		};
> +
> +		fpgaio {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x40028000 0x10>;
> +
> +			led@0 {
> +				compatible = "register-bit-led";
> +				offset = <0x0>;
> +				mask = <0x01>;
> +				label = "userled:0";
> +				linux,default-trigger = "heartbeat";
> +				default-state = "on";
> +			};
> +
> +			led@1 {
> +				compatible = "register-bit-led";
> +				offset = <0x0>;
> +				mask = <0x02>;
> +				label = "userled:1";
> +				linux,default-trigger = "usr";
> +				default-state = "off";
> +			};
> +		};
> +	};
> +};
> 


  parent reply	other threads:[~2015-12-23  9:33 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-02  9:33 [PATCH v1 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
2015-12-02  9:33 ` Vladimir Murzin
2015-12-02  9:33 ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 01/10] dt-bindings: document the MPS2 timer bindings Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 02/10] clockevents/drivers: add MPS2 Timer driver Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
     [not found]   ` <1449048790-25859-3-git-send-email-vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
2015-12-07  9:25     ` Vladimir Murzin
2015-12-07  9:25       ` Vladimir Murzin
2015-12-07  9:25       ` Vladimir Murzin
2015-12-14 13:36     ` Daniel Lezcano
2015-12-14 13:36       ` Daniel Lezcano
2015-12-14 13:36       ` Daniel Lezcano
     [not found]       ` <566EC5D2.9050005-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-12-15 12:47         ` Vladimir Murzin
2015-12-15 12:47           ` Vladimir Murzin
2015-12-15 12:47           ` Vladimir Murzin
2015-12-14 13:56     ` Rob Herring
2015-12-14 13:56       ` Rob Herring
2015-12-14 13:56       ` Rob Herring
     [not found]       ` <CAL_Jsq+MhvV5BFw+x3TWTDheSpgWHjHjO02+D4V4swr493HXrg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-15 13:16         ` Vladimir Murzin
2015-12-15 13:16           ` Vladimir Murzin
2015-12-15 13:16           ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 03/10] dt-bindings: document the MPS2 UART bindings Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
     [not found]   ` <1449048790-25859-5-git-send-email-vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
2015-12-07  9:26     ` Vladimir Murzin
2015-12-07  9:26       ` Vladimir Murzin
2015-12-07  9:26       ` Vladimir Murzin
2015-12-12 23:39     ` Andy Shevchenko
2015-12-12 23:39       ` Andy Shevchenko
2015-12-12 23:39       ` Andy Shevchenko
2015-12-13  7:00       ` Greg Kroah-Hartman
2015-12-13  7:00         ` Greg Kroah-Hartman
2015-12-15 12:40       ` Vladimir Murzin
2015-12-15 12:40         ` Vladimir Murzin
2015-12-17 13:15         ` Andy Shevchenko
2015-12-17 13:15           ` Andy Shevchenko
2015-12-02  9:33 ` [PATCH v1 05/10] serial: mps2-uart: add support for early console Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 06/10] ARM: mps2: introduce MPS2 platform Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 07/10] ARM: mps2: add low-level debug support Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 08/10] ARM: configs: add MPS2 defconfig Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 09/10] ARM: dts: introduce MPS2 AN385/AN386 Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin
     [not found]   ` <1449048790-25859-10-git-send-email-vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
2015-12-23  9:33     ` Vladimir Murzin [this message]
2015-12-23  9:33       ` Vladimir Murzin
2015-12-23  9:33       ` Vladimir Murzin
2015-12-02  9:33 ` [PATCH v1 10/10] ARM: dts: introduce MPS2 AN399/AN400 Vladimir Murzin
2015-12-02  9:33   ` Vladimir Murzin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=567A6A7A.7080400@arm.com \
    --to=vladimir.murzin-5wv7dgnigg8@public.gmane.org \
    --cc=Mark.Rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=Pawel.Moll-5wv7dgnIgG8@public.gmane.org \
    --cc=afaerber-l3A5Bk7waGM@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jslaby-AlSwsSmVLrQ@public.gmane.org \
    --cc=linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
    --cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.