From: Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
To: Bintian <bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
"xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org"
<xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org
Subject: Re: [PATCH v4] arm64: dts: add all hi6220 i2c nodes
Date: Thu, 31 Dec 2015 09:27:06 +0800 [thread overview]
Message-ID: <5684846A.2050305@hisilicon.com> (raw)
In-Reply-To: <56828756.2040500-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
+to xuwei
On 2015/12/29 21:15, Bintian wrote:
> On 2015/12/2 18:13, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
>> Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Reviewed-by: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 34 +++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..8cec56a 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,39 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + interrupts = <0 45 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + interrupts = <0 46 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>
> Looks good to me!
>
> Reviewed-by: Bintian Wang<bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
>
>
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: kong.kongxinwei@hisilicon.com (Xinwei Kong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] arm64: dts: add all hi6220 i2c nodes
Date: Thu, 31 Dec 2015 09:27:06 +0800 [thread overview]
Message-ID: <5684846A.2050305@hisilicon.com> (raw)
In-Reply-To: <56828756.2040500@huawei.com>
+to xuwei
On 2015/12/29 21:15, Bintian wrote:
> On 2015/12/2 18:13, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Reviewed-by: Shawn Guo <shawnguo@kernel.org>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 34 +++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..8cec56a 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,39 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c at f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c at f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + interrupts = <0 45 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c at f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + interrupts = <0 46 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>
> Looks good to me!
>
> Reviewed-by: Bintian Wang<bintian.wang@huawei.com>
>
>
>
> .
>
WARNING: multiple messages have this Message-ID (diff)
From: Xinwei Kong <kong.kongxinwei@hisilicon.com>
To: Bintian <bintian.wang@huawei.com>,
"xuwei5@hisilicon.com" <xuwei5@hisilicon.com>
Cc: <shawnguo@kernel.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
<linux-i2c@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <pawel.moll@arm.com>,
<galak@codeaurora.org>, <catalin.marinas@arm.com>,
<w.f@huawei.com>, <liguozhu@hisilicon.com>,
<puck.chen@hisilicon.com>
Subject: Re: [PATCH v4] arm64: dts: add all hi6220 i2c nodes
Date: Thu, 31 Dec 2015 09:27:06 +0800 [thread overview]
Message-ID: <5684846A.2050305@hisilicon.com> (raw)
In-Reply-To: <56828756.2040500@huawei.com>
+to xuwei
On 2015/12/29 21:15, Bintian wrote:
> On 2015/12/2 18:13, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Reviewed-by: Shawn Guo <shawnguo@kernel.org>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 34 +++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..8cec56a 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,39 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + interrupts = <0 45 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + interrupts = <0 46 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>
> Looks good to me!
>
> Reviewed-by: Bintian Wang<bintian.wang@huawei.com>
>
>
>
> .
>
next prev parent reply other threads:[~2015-12-31 1:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-02 10:13 [PATCH v4] arm64: dts: add all hi6220 i2c nodes Xinwei Kong
2015-12-02 10:13 ` Xinwei Kong
2015-12-02 10:13 ` Xinwei Kong
2015-12-02 12:57 ` Shawn Guo
2015-12-02 12:57 ` Shawn Guo
[not found] ` <1449051201-7288-1-git-send-email-kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-12-29 13:15 ` Bintian
2015-12-29 13:15 ` Bintian
2015-12-29 13:15 ` Bintian
[not found] ` <56828756.2040500-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-12-31 1:27 ` Xinwei Kong [this message]
2015-12-31 1:27 ` Xinwei Kong
2015-12-31 1:27 ` Xinwei Kong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5684846A.2050305@hisilicon.com \
--to=kong.kongxinwei-c8/m+/jpzteamjb+lgu22q@public.gmane.org \
--cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.