All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vignesh R <vigneshr@ti.com>
To: Tony Lindgren <tony@atomide.com>,
	Brian Norris <computersforpeace@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@arm.linux.org.uk>, <hramrach@gmail.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mtd@lists.infradead.org>, <linux-spi@vger.kernel.org>
Subject: Re: [PATCH v5 0/5] Add memory mapped read support for ti-qspi
Date: Tue, 5 Jan 2016 10:50:42 +0530	[thread overview]
Message-ID: <568B52AA.4070900@ti.com> (raw)
In-Reply-To: <1449807000-6457-1-git-send-email-vigneshr@ti.com>

Hi Brian,

On 12/11/2015 09:39 AM, Vignesh R wrote:
> Changes since v4:
> Use syscon to access system control module register in ti-qspi driver.
> 

Gentle ping...
Are you ok with MTD side changes of this patch series?

> Changes since v3:
> Rework to introduce spi_flash_read_message struct.
> Support different opcode/addr/data formats as per Brian's suggestion
> here: https://lkml.org/lkml/2015/11/11/454
> 
> Changes since v2:
> Remove mmap_lock_mutex.
> Optimize enable/disable of mmap mode.
> 
> Changes since v1:
> Introduce API in SPI core that MTD flash driver can call for mmap read
> instead of directly calling spi-master driver callback. This API makes
> sure that SPI core msg queue is locked during mmap transfers.
> v1: https://lkml.org/lkml/2015/9/4/103
> 
> 
> Cover letter:
> 
> This patch series adds support for memory mapped read port of ti-qspi.
> ti-qspi has a special memory mapped port through which SPI flash
> memories can be accessed directly via SoC specific memory region.
> 
> First patch adds a method to pass flash specific information like read
> opcode, dummy bytes etc and to request mmap read. Second patch
> implements mmap read method in ti-qspi driver. Patch 3 adapts m25p80 to
> use mmap read method before trying normal SPI transfer. Patch 4 and 5
> add memory map region DT entries for DRA7xx and AM43xx SoCs.
> 
> This patch series is based on the discussions here:
> http://www.spinics.net/lists/linux-spi/msg04796.html
> 
> Tested on DRA74 EVM and AM437x-SK.
> Read performance increases from ~100kB/s to ~2.5MB/s.
> 
> Vignesh R (5):
>   spi: introduce accelerated read support for spi flash devices
>   spi: spi-ti-qspi: add mmap mode read support
>   mtd: devices: m25p80: add support for mmap read request
>   ARM: dts: DRA7: add entry for qspi mmap region
>   ARM: dts: AM4372: add entry for qspi mmap region
> 
>  Documentation/devicetree/bindings/spi/ti_qspi.txt |  22 +++-
>  arch/arm/boot/dts/am4372.dtsi                     |   4 +-
>  arch/arm/boot/dts/dra7.dtsi                       |   6 +-
>  drivers/mtd/devices/m25p80.c                      |  20 ++++
>  drivers/spi/spi-ti-qspi.c                         | 139 +++++++++++++++++-----
>  drivers/spi/spi.c                                 |  45 +++++++
>  include/linux/spi/spi.h                           |  41 +++++++
>  7 files changed, 243 insertions(+), 34 deletions(-)
> 

-- 
Regards
Vignesh

WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr@ti.com>
To: Tony Lindgren <tony@atomide.com>,
	Brian Norris <computersforpeace@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@arm.linux.org.uk>,
	hramrach@gmail.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org
Subject: Re: [PATCH v5 0/5] Add memory mapped read support for ti-qspi
Date: Tue, 5 Jan 2016 10:50:42 +0530	[thread overview]
Message-ID: <568B52AA.4070900@ti.com> (raw)
In-Reply-To: <1449807000-6457-1-git-send-email-vigneshr@ti.com>

Hi Brian,

On 12/11/2015 09:39 AM, Vignesh R wrote:
> Changes since v4:
> Use syscon to access system control module register in ti-qspi driver.
> 

Gentle ping...
Are you ok with MTD side changes of this patch series?

> Changes since v3:
> Rework to introduce spi_flash_read_message struct.
> Support different opcode/addr/data formats as per Brian's suggestion
> here: https://lkml.org/lkml/2015/11/11/454
> 
> Changes since v2:
> Remove mmap_lock_mutex.
> Optimize enable/disable of mmap mode.
> 
> Changes since v1:
> Introduce API in SPI core that MTD flash driver can call for mmap read
> instead of directly calling spi-master driver callback. This API makes
> sure that SPI core msg queue is locked during mmap transfers.
> v1: https://lkml.org/lkml/2015/9/4/103
> 
> 
> Cover letter:
> 
> This patch series adds support for memory mapped read port of ti-qspi.
> ti-qspi has a special memory mapped port through which SPI flash
> memories can be accessed directly via SoC specific memory region.
> 
> First patch adds a method to pass flash specific information like read
> opcode, dummy bytes etc and to request mmap read. Second patch
> implements mmap read method in ti-qspi driver. Patch 3 adapts m25p80 to
> use mmap read method before trying normal SPI transfer. Patch 4 and 5
> add memory map region DT entries for DRA7xx and AM43xx SoCs.
> 
> This patch series is based on the discussions here:
> http://www.spinics.net/lists/linux-spi/msg04796.html
> 
> Tested on DRA74 EVM and AM437x-SK.
> Read performance increases from ~100kB/s to ~2.5MB/s.
> 
> Vignesh R (5):
>   spi: introduce accelerated read support for spi flash devices
>   spi: spi-ti-qspi: add mmap mode read support
>   mtd: devices: m25p80: add support for mmap read request
>   ARM: dts: DRA7: add entry for qspi mmap region
>   ARM: dts: AM4372: add entry for qspi mmap region
> 
>  Documentation/devicetree/bindings/spi/ti_qspi.txt |  22 +++-
>  arch/arm/boot/dts/am4372.dtsi                     |   4 +-
>  arch/arm/boot/dts/dra7.dtsi                       |   6 +-
>  drivers/mtd/devices/m25p80.c                      |  20 ++++
>  drivers/spi/spi-ti-qspi.c                         | 139 +++++++++++++++++-----
>  drivers/spi/spi.c                                 |  45 +++++++
>  include/linux/spi/spi.h                           |  41 +++++++
>  7 files changed, 243 insertions(+), 34 deletions(-)
> 

-- 
Regards
Vignesh

WARNING: multiple messages have this Message-ID (diff)
From: vigneshr@ti.com (Vignesh R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] Add memory mapped read support for ti-qspi
Date: Tue, 5 Jan 2016 10:50:42 +0530	[thread overview]
Message-ID: <568B52AA.4070900@ti.com> (raw)
In-Reply-To: <1449807000-6457-1-git-send-email-vigneshr@ti.com>

Hi Brian,

On 12/11/2015 09:39 AM, Vignesh R wrote:
> Changes since v4:
> Use syscon to access system control module register in ti-qspi driver.
> 

Gentle ping...
Are you ok with MTD side changes of this patch series?

> Changes since v3:
> Rework to introduce spi_flash_read_message struct.
> Support different opcode/addr/data formats as per Brian's suggestion
> here: https://lkml.org/lkml/2015/11/11/454
> 
> Changes since v2:
> Remove mmap_lock_mutex.
> Optimize enable/disable of mmap mode.
> 
> Changes since v1:
> Introduce API in SPI core that MTD flash driver can call for mmap read
> instead of directly calling spi-master driver callback. This API makes
> sure that SPI core msg queue is locked during mmap transfers.
> v1: https://lkml.org/lkml/2015/9/4/103
> 
> 
> Cover letter:
> 
> This patch series adds support for memory mapped read port of ti-qspi.
> ti-qspi has a special memory mapped port through which SPI flash
> memories can be accessed directly via SoC specific memory region.
> 
> First patch adds a method to pass flash specific information like read
> opcode, dummy bytes etc and to request mmap read. Second patch
> implements mmap read method in ti-qspi driver. Patch 3 adapts m25p80 to
> use mmap read method before trying normal SPI transfer. Patch 4 and 5
> add memory map region DT entries for DRA7xx and AM43xx SoCs.
> 
> This patch series is based on the discussions here:
> http://www.spinics.net/lists/linux-spi/msg04796.html
> 
> Tested on DRA74 EVM and AM437x-SK.
> Read performance increases from ~100kB/s to ~2.5MB/s.
> 
> Vignesh R (5):
>   spi: introduce accelerated read support for spi flash devices
>   spi: spi-ti-qspi: add mmap mode read support
>   mtd: devices: m25p80: add support for mmap read request
>   ARM: dts: DRA7: add entry for qspi mmap region
>   ARM: dts: AM4372: add entry for qspi mmap region
> 
>  Documentation/devicetree/bindings/spi/ti_qspi.txt |  22 +++-
>  arch/arm/boot/dts/am4372.dtsi                     |   4 +-
>  arch/arm/boot/dts/dra7.dtsi                       |   6 +-
>  drivers/mtd/devices/m25p80.c                      |  20 ++++
>  drivers/spi/spi-ti-qspi.c                         | 139 +++++++++++++++++-----
>  drivers/spi/spi.c                                 |  45 +++++++
>  include/linux/spi/spi.h                           |  41 +++++++
>  7 files changed, 243 insertions(+), 34 deletions(-)
> 

-- 
Regards
Vignesh

  parent reply	other threads:[~2016-01-05  5:20 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-11  4:09 [PATCH v5 0/5] Add memory mapped read support for ti-qspi Vignesh R
2015-12-11  4:09 ` Vignesh R
2015-12-11  4:09 ` Vignesh R
2015-12-11  4:09 ` [PATCH v5 1/5] spi: introduce accelerated read support for spi flash devices Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11  4:09 ` [PATCH v5 2/5] spi: spi-ti-qspi: add mmap mode read support Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11  4:09   ` Vignesh R
     [not found]   ` <1449807000-6457-3-git-send-email-vigneshr-l0cyMroinI0@public.gmane.org>
2016-02-09 19:43     ` Applied "spi: spi-ti-qspi: add mmap mode read support" to the spi tree Mark Brown
2015-12-11  4:09 ` [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11  4:09   ` Vignesh R
2016-02-09 19:36   ` Mark Brown
2016-02-09 19:36     ` Mark Brown
2016-02-09 19:36     ` Mark Brown
2016-02-11  5:33     ` Vignesh R
2016-02-11  5:33       ` Vignesh R
2016-02-11  5:33       ` Vignesh R
2016-02-11  5:33       ` Vignesh R
2016-02-12 22:37       ` Mark Brown
2016-02-12 22:37         ` Mark Brown
2016-02-12 22:37         ` Mark Brown
2016-02-16  8:00         ` Vignesh R
2016-02-16  8:00           ` Vignesh R
2016-02-16  8:00           ` Vignesh R
2016-02-16 12:38           ` Mark Brown
2016-02-16 12:38             ` Mark Brown
2016-02-16 12:38             ` Mark Brown
2016-02-17 16:11             ` R, Vignesh
2016-02-17 16:11               ` R, Vignesh
2016-02-17 16:11               ` R, Vignesh
2016-02-24 12:21               ` Vignesh R
2016-02-24 12:21                 ` Vignesh R
2015-12-11  4:09 ` [PATCH v5 4/5] ARM: dts: DRA7: add entry for qspi mmap region Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11  4:09   ` Vignesh R
2015-12-11 15:09   ` Rob Herring
2015-12-11 15:09     ` Rob Herring
2015-12-17 18:45     ` Tony Lindgren
2015-12-17 18:45       ` Tony Lindgren
2015-12-17 18:45       ` Tony Lindgren
2015-12-18  5:50       ` Vignesh R
2015-12-18  5:50         ` Vignesh R
2015-12-18 16:42         ` Tony Lindgren
2015-12-18 16:42           ` Tony Lindgren
2015-12-18 16:42           ` Tony Lindgren
2015-12-11  4:10 ` [PATCH v5 5/5] ARM: dts: AM4372: " Vignesh R
2015-12-11  4:10   ` Vignesh R
2015-12-11  4:10   ` Vignesh R
2015-12-21 12:03 ` [PATCH v5 0/5] Add memory mapped read support for ti-qspi Vignesh R
2015-12-21 12:03   ` Vignesh R
2015-12-21 12:03   ` Vignesh R
2016-01-05  5:20 ` Vignesh R [this message]
2016-01-05  5:20   ` Vignesh R
2016-01-05  5:20   ` Vignesh R
2016-01-05 18:19   ` Mark Brown
2016-01-05 18:19     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=568B52AA.4070900@ti.com \
    --to=vigneshr@ti.com \
    --cc=broonie@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hramrach@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.