* [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
@ 2016-01-12 9:46 ` Wenyou Yang
0 siblings, 0 replies; 13+ messages in thread
From: Wenyou Yang @ 2016-01-12 9:46 UTC (permalink / raw)
To: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala
Cc: Javier Martinez Canillas, Krzysztof Kozlowski, Nicolas Ferre,
linux-arm-kernel, linux-kernel, devicetree, Wenyou Yang
This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
- Regulator
- Charger
It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
Changes in v3: None
Changes in v2:
- add more help information in Kconfig.
- update the file header with short version license and author line.
- remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
- use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
- use more explicit info to indicate the failure to add sub devices.
- remove the unnecessary print out.
- substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
drivers/mfd/Kconfig | 11 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/act8945a.c | 109 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/act8945a.h | 21 ++++++++
4 files changed, 142 insertions(+)
create mode 100644 drivers/mfd/act8945a.c
create mode 100644 include/linux/mfd/act8945a.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..34375a9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
+config MFD_ACT8945A
+ bool "Active-semi ACT8945A"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C && OF
+ help
+ Support for the ACT8945A PMIC from Active-semi. This device
+ features three step-down DC/DC converters and four low-dropout
+ linear regulators, along with a complete ActivePath battery
+ charger.
+
config MFD_AS3711
bool "AMS AS3711"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..7f8c50a
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,109 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/act8945a.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell act8945a_devs[] = {
+ {
+ .name = "act8945a-pmic",
+ .of_compatible = "active-semi,act8945a-regulator",
+ },
+ {
+ .name = "act8945a-charger",
+ .of_compatible = "active-semi,act8945a-charger",
+ },
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct act8945a_dev *act8945a;
+ int ret;
+
+ act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
+ if (!act8945a)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, act8945a);
+
+ act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+ if (IS_ERR(act8945a->regmap)) {
+ ret = PTR_ERR(act8945a->regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+ ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add sub devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+ mfd_remove_devices(&i2c->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+ { "act8945a", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+ {.compatible = "active-semi,act8945a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+ .driver = {
+ .name = "act8945a",
+ .of_match_table = of_match_ptr(act8945a_of_match),
+ },
+ .probe = act8945a_i2c_probe,
+ .remove = act8945a_i2c_remove,
+ .id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+ return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+ i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/act8945a.h b/include/linux/mfd/act8945a.h
new file mode 100644
index 0000000..5f67009
--- /dev/null
+++ b/include/linux/mfd/act8945a.h
@@ -0,0 +1,21 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _LINUX_MFD_ACT8945A_H
+#define _LINUX_MFD_ACT8945A_H
+
+struct act8945a_dev {
+ struct regmap *regmap;
+};
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
@ 2016-01-12 9:46 ` Wenyou Yang
0 siblings, 0 replies; 13+ messages in thread
From: Wenyou Yang @ 2016-01-12 9:46 UTC (permalink / raw)
To: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala
Cc: Javier Martinez Canillas, Krzysztof Kozlowski, Nicolas Ferre,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Wenyou Yang
This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
- Regulator
- Charger
It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.
Signed-off-by: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---
Changes in v3: None
Changes in v2:
- add more help information in Kconfig.
- update the file header with short version license and author line.
- remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
- use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
- use more explicit info to indicate the failure to add sub devices.
- remove the unnecessary print out.
- substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
drivers/mfd/Kconfig | 11 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/act8945a.c | 109 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/act8945a.h | 21 ++++++++
4 files changed, 142 insertions(+)
create mode 100644 drivers/mfd/act8945a.c
create mode 100644 include/linux/mfd/act8945a.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..34375a9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
+config MFD_ACT8945A
+ bool "Active-semi ACT8945A"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C && OF
+ help
+ Support for the ACT8945A PMIC from Active-semi. This device
+ features three step-down DC/DC converters and four low-dropout
+ linear regulators, along with a complete ActivePath battery
+ charger.
+
config MFD_AS3711
bool "AMS AS3711"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..7f8c50a
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,109 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/act8945a.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell act8945a_devs[] = {
+ {
+ .name = "act8945a-pmic",
+ .of_compatible = "active-semi,act8945a-regulator",
+ },
+ {
+ .name = "act8945a-charger",
+ .of_compatible = "active-semi,act8945a-charger",
+ },
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct act8945a_dev *act8945a;
+ int ret;
+
+ act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
+ if (!act8945a)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, act8945a);
+
+ act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+ if (IS_ERR(act8945a->regmap)) {
+ ret = PTR_ERR(act8945a->regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+ ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add sub devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+ mfd_remove_devices(&i2c->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+ { "act8945a", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+ {.compatible = "active-semi,act8945a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+ .driver = {
+ .name = "act8945a",
+ .of_match_table = of_match_ptr(act8945a_of_match),
+ },
+ .probe = act8945a_i2c_probe,
+ .remove = act8945a_i2c_remove,
+ .id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+ return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+ i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/act8945a.h b/include/linux/mfd/act8945a.h
new file mode 100644
index 0000000..5f67009
--- /dev/null
+++ b/include/linux/mfd/act8945a.h
@@ -0,0 +1,21 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _LINUX_MFD_ACT8945A_H
+#define _LINUX_MFD_ACT8945A_H
+
+struct act8945a_dev {
+ struct regmap *regmap;
+};
+
+#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
2016-01-12 9:46 ` Wenyou Yang
@ 2016-01-13 1:46 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2016-01-13 1:46 UTC (permalink / raw)
To: linux-arm-kernel
On 12.01.2016 18:46, Wenyou Yang wrote:
> This patch adds support for the Active-semi ACT8945A PMIC.
> It is a Multi Function Device with the following subdevices:
> - Regulator
> - Charger
>
> It is interfaced to the host controller using I2C interface,
> ACT8945A is a child device of the I2C.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
>
> Changes in v3: None
> Changes in v2:
> - add more help information in Kconfig.
> - update the file header with short version license and author line.
> - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> - use more explicit info to indicate the failure to add sub devices.
> - remove the unnecessary print out.
> - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
>
> drivers/mfd/Kconfig | 11 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/act8945a.c | 109 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/act8945a.h | 21 ++++++++
> 4 files changed, 142 insertions(+)
> create mode 100644 drivers/mfd/act8945a.c
> create mode 100644 include/linux/mfd/act8945a.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..34375a9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,17 @@ config MFD_CS5535
> This is the core driver for CS5535/CS5536 MFD functions. This is
> necessary for using the board's GPIO and MFGPT functionality.
>
> +config MFD_ACT8945A
> + bool "Active-semi ACT8945A"
> + select MFD_CORE
> + select REGMAP_I2C
> + depends on I2C && OF
> + help
> + Support for the ACT8945A PMIC from Active-semi. This device
> + features three step-down DC/DC converters and four low-dropout
> + linear regulators, along with a complete ActivePath battery
> + charger.
> +
> config MFD_AS3711
> bool "AMS AS3711"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..2f1ca82 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
> obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
> +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> obj-$(CONFIG_MFD_SM501) += sm501.o
> obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
> new file mode 100644
> index 0000000..7f8c50a
> --- /dev/null
> +++ b/drivers/mfd/act8945a.c
> @@ -0,0 +1,109 @@
> +/*
> + * MFD driver for Active-semi ACT8945a PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.
> + *
> + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/act8945a.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +static const struct mfd_cell act8945a_devs[] = {
> + {
> + .name = "act8945a-pmic",
> + .of_compatible = "active-semi,act8945a-regulator",
> + },
> + {
> + .name = "act8945a-charger",
> + .of_compatible = "active-semi,act8945a-charger",
> + },
> +};
> +
> +static const struct regmap_config act8945a_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int act8945a_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct act8945a_dev *act8945a;
> + int ret;
> +
> + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> + if (!act8945a)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, act8945a);
> +
> + act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
> + if (IS_ERR(act8945a->regmap)) {
> + ret = PTR_ERR(act8945a->regmap);
> + dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
> + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add sub devices\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int act8945a_i2c_remove(struct i2c_client *i2c)
> +{
> + mfd_remove_devices(&i2c->dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id act8945a_i2c_id[] = {
> + { "act8945a", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> +
> +static const struct of_device_id act8945a_of_match[] = {
> + {.compatible = "active-semi,act8945a", },
Nit: a space before .compatible
Overall it looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
@ 2016-01-13 1:46 ` Krzysztof Kozlowski
0 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2016-01-13 1:46 UTC (permalink / raw)
To: Wenyou Yang, Lee Jones, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala
Cc: Javier Martinez Canillas, Nicolas Ferre, linux-arm-kernel,
linux-kernel, devicetree
On 12.01.2016 18:46, Wenyou Yang wrote:
> This patch adds support for the Active-semi ACT8945A PMIC.
> It is a Multi Function Device with the following subdevices:
> - Regulator
> - Charger
>
> It is interfaced to the host controller using I2C interface,
> ACT8945A is a child device of the I2C.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
>
> Changes in v3: None
> Changes in v2:
> - add more help information in Kconfig.
> - update the file header with short version license and author line.
> - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> - use more explicit info to indicate the failure to add sub devices.
> - remove the unnecessary print out.
> - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
>
> drivers/mfd/Kconfig | 11 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/act8945a.c | 109 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/act8945a.h | 21 ++++++++
> 4 files changed, 142 insertions(+)
> create mode 100644 drivers/mfd/act8945a.c
> create mode 100644 include/linux/mfd/act8945a.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..34375a9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,17 @@ config MFD_CS5535
> This is the core driver for CS5535/CS5536 MFD functions. This is
> necessary for using the board's GPIO and MFGPT functionality.
>
> +config MFD_ACT8945A
> + bool "Active-semi ACT8945A"
> + select MFD_CORE
> + select REGMAP_I2C
> + depends on I2C && OF
> + help
> + Support for the ACT8945A PMIC from Active-semi. This device
> + features three step-down DC/DC converters and four low-dropout
> + linear regulators, along with a complete ActivePath battery
> + charger.
> +
> config MFD_AS3711
> bool "AMS AS3711"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..2f1ca82 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
> obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
> +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> obj-$(CONFIG_MFD_SM501) += sm501.o
> obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
> new file mode 100644
> index 0000000..7f8c50a
> --- /dev/null
> +++ b/drivers/mfd/act8945a.c
> @@ -0,0 +1,109 @@
> +/*
> + * MFD driver for Active-semi ACT8945a PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.
> + *
> + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/act8945a.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +static const struct mfd_cell act8945a_devs[] = {
> + {
> + .name = "act8945a-pmic",
> + .of_compatible = "active-semi,act8945a-regulator",
> + },
> + {
> + .name = "act8945a-charger",
> + .of_compatible = "active-semi,act8945a-charger",
> + },
> +};
> +
> +static const struct regmap_config act8945a_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int act8945a_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct act8945a_dev *act8945a;
> + int ret;
> +
> + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> + if (!act8945a)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, act8945a);
> +
> + act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
> + if (IS_ERR(act8945a->regmap)) {
> + ret = PTR_ERR(act8945a->regmap);
> + dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
> + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add sub devices\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int act8945a_i2c_remove(struct i2c_client *i2c)
> +{
> + mfd_remove_devices(&i2c->dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id act8945a_i2c_id[] = {
> + { "act8945a", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> +
> +static const struct of_device_id act8945a_of_match[] = {
> + {.compatible = "active-semi,act8945a", },
Nit: a space before .compatible
Overall it looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
2016-01-13 1:46 ` Krzysztof Kozlowski
@ 2016-01-13 3:48 ` Yang, Wenyou
-1 siblings, 0 replies; 13+ messages in thread
From: Yang, Wenyou @ 2016-01-13 3:48 UTC (permalink / raw)
To: linux-arm-kernel
Hi Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:k.kozlowski at samsung.com]
> Sent: 2016?1?13? 9:46
> To: Yang, Wenyou <Wenyou.Yang@atmel.com>; Lee Jones
> <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>; Pawel Moll
> <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian Campbell
> <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>; Ferre, Nicolas
> <Nicolas.FERRE@atmel.com>; linux-arm-kernel at lists.infradead.org; linux-
> kernel at vger.kernel.org; devicetree at vger.kernel.org
> Subject: Re: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> MFD driver
>
> On 12.01.2016 18:46, Wenyou Yang wrote:
> > This patch adds support for the Active-semi ACT8945A PMIC.
> > It is a Multi Function Device with the following subdevices:
> > - Regulator
> > - Charger
> >
> > It is interfaced to the host controller using I2C interface, ACT8945A
> > is a child device of the I2C.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > ---
> >
> > Changes in v3: None
> > Changes in v2:
> > - add more help information in Kconfig.
> > - update the file header with short version license and author line.
> > - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> > - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> > - use more explicit info to indicate the failure to add sub devices.
> > - remove the unnecessary print out.
> > - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> >
> > drivers/mfd/Kconfig | 11 +++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/act8945a.c | 109
> ++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/act8945a.h | 21 ++++++++
> > 4 files changed, 142 insertions(+)
> > create mode 100644 drivers/mfd/act8945a.c create mode 100644
> > include/linux/mfd/act8945a.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 9ca66de..34375a9 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -18,6 +18,17 @@ config MFD_CS5535
> > This is the core driver for CS5535/CS5536 MFD functions. This is
> > necessary for using the board's GPIO and MFGPT functionality.
> >
> > +config MFD_ACT8945A
> > + bool "Active-semi ACT8945A"
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + depends on I2C && OF
> > + help
> > + Support for the ACT8945A PMIC from Active-semi. This device
> > + features three step-down DC/DC converters and four low-dropout
> > + linear regulators, along with a complete ActivePath battery
> > + charger.
> > +
> > config MFD_AS3711
> > bool "AMS AS3711"
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 0f230a6..2f1ca82 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -6,6 +6,7 @@
> > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
> > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
> > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> > obj-$(CONFIG_MFD_SM501) += sm501.o
> > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > mode 100644 index 0000000..7f8c50a
> > --- /dev/null
> > +++ b/drivers/mfd/act8945a.c
> > @@ -0,0 +1,109 @@
> > +/*
> > + * MFD driver for Active-semi ACT8945a PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
> > + *
> > + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms of the GNU General Public License as published
> > +by the
> > + * Free Software Foundation; either version 2 of the License, or (at
> > +your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mfd/act8945a.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +static const struct mfd_cell act8945a_devs[] = {
> > + {
> > + .name = "act8945a-pmic",
> > + .of_compatible = "active-semi,act8945a-regulator",
> > + },
> > + {
> > + .name = "act8945a-charger",
> > + .of_compatible = "active-semi,act8945a-charger",
> > + },
> > +};
> > +
> > +static const struct regmap_config act8945a_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int act8945a_i2c_probe(struct i2c_client *i2c,
> > + const struct i2c_device_id *id) {
> > + struct act8945a_dev *act8945a;
> > + int ret;
> > +
> > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> > + if (!act8945a)
> > + return -ENOMEM;
> > +
> > + i2c_set_clientdata(i2c, act8945a);
> > +
> > + act8945a->regmap = devm_regmap_init_i2c(i2c,
> &act8945a_regmap_config);
> > + if (IS_ERR(act8945a->regmap)) {
> > + ret = PTR_ERR(act8945a->regmap);
> > + dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> act8945a_devs,
> > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > + if (ret) {
> > + dev_err(&i2c->dev, "Failed to add sub devices\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > + mfd_remove_devices(&i2c->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > + { "act8945a", 0 },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > +
> > +static const struct of_device_id act8945a_of_match[] = {
> > + {.compatible = "active-semi,act8945a", },
>
> Nit: a space before .compatible
>
> Overall it looks good:
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thank you for your Reviewed-by.
>
> Best regards,
> Krzysztof
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 13+ messages in thread* RE: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
@ 2016-01-13 3:48 ` Yang, Wenyou
0 siblings, 0 replies; 13+ messages in thread
From: Yang, Wenyou @ 2016-01-13 3:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Lee Jones, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala
Cc: Javier Martinez Canillas, Ferre, Nicolas,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Hi Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:k.kozlowski@samsung.com]
> Sent: 2016年1月13日 9:46
> To: Yang, Wenyou <Wenyou.Yang@atmel.com>; Lee Jones
> <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>; Pawel Moll
> <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian Campbell
> <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>; Ferre, Nicolas
> <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> MFD driver
>
> On 12.01.2016 18:46, Wenyou Yang wrote:
> > This patch adds support for the Active-semi ACT8945A PMIC.
> > It is a Multi Function Device with the following subdevices:
> > - Regulator
> > - Charger
> >
> > It is interfaced to the host controller using I2C interface, ACT8945A
> > is a child device of the I2C.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > ---
> >
> > Changes in v3: None
> > Changes in v2:
> > - add more help information in Kconfig.
> > - update the file header with short version license and author line.
> > - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> > - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> > - use more explicit info to indicate the failure to add sub devices.
> > - remove the unnecessary print out.
> > - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> >
> > drivers/mfd/Kconfig | 11 +++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/act8945a.c | 109
> ++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/act8945a.h | 21 ++++++++
> > 4 files changed, 142 insertions(+)
> > create mode 100644 drivers/mfd/act8945a.c create mode 100644
> > include/linux/mfd/act8945a.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 9ca66de..34375a9 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -18,6 +18,17 @@ config MFD_CS5535
> > This is the core driver for CS5535/CS5536 MFD functions. This is
> > necessary for using the board's GPIO and MFGPT functionality.
> >
> > +config MFD_ACT8945A
> > + bool "Active-semi ACT8945A"
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + depends on I2C && OF
> > + help
> > + Support for the ACT8945A PMIC from Active-semi. This device
> > + features three step-down DC/DC converters and four low-dropout
> > + linear regulators, along with a complete ActivePath battery
> > + charger.
> > +
> > config MFD_AS3711
> > bool "AMS AS3711"
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 0f230a6..2f1ca82 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -6,6 +6,7 @@
> > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
> > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
> > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> > obj-$(CONFIG_MFD_SM501) += sm501.o
> > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > mode 100644 index 0000000..7f8c50a
> > --- /dev/null
> > +++ b/drivers/mfd/act8945a.c
> > @@ -0,0 +1,109 @@
> > +/*
> > + * MFD driver for Active-semi ACT8945a PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
> > + *
> > + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms of the GNU General Public License as published
> > +by the
> > + * Free Software Foundation; either version 2 of the License, or (at
> > +your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mfd/act8945a.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +static const struct mfd_cell act8945a_devs[] = {
> > + {
> > + .name = "act8945a-pmic",
> > + .of_compatible = "active-semi,act8945a-regulator",
> > + },
> > + {
> > + .name = "act8945a-charger",
> > + .of_compatible = "active-semi,act8945a-charger",
> > + },
> > +};
> > +
> > +static const struct regmap_config act8945a_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int act8945a_i2c_probe(struct i2c_client *i2c,
> > + const struct i2c_device_id *id) {
> > + struct act8945a_dev *act8945a;
> > + int ret;
> > +
> > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> > + if (!act8945a)
> > + return -ENOMEM;
> > +
> > + i2c_set_clientdata(i2c, act8945a);
> > +
> > + act8945a->regmap = devm_regmap_init_i2c(i2c,
> &act8945a_regmap_config);
> > + if (IS_ERR(act8945a->regmap)) {
> > + ret = PTR_ERR(act8945a->regmap);
> > + dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> act8945a_devs,
> > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > + if (ret) {
> > + dev_err(&i2c->dev, "Failed to add sub devices\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > + mfd_remove_devices(&i2c->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > + { "act8945a", 0 },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > +
> > +static const struct of_device_id act8945a_of_match[] = {
> > + {.compatible = "active-semi,act8945a", },
>
> Nit: a space before .compatible
>
> Overall it looks good:
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thank you for your Reviewed-by.
>
> Best regards,
> Krzysztof
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 13+ messages in thread