[PATCH v4 0/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[PATCH v4 0/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Add DT support for WLS1271 SPI driver.
Add power operation function to the WLS1271 SPI driver.

Uri Mashiach (3):
  wlcore/wl12xx: spi: add power operation function
  wlcore/wl12xx: spi: add device tree support
  wlcore/wl12xx: spi: add wifi support to cm-t335

 .../bindings/net/wireless/ti,wlcore,spi.txt        | 36 +++++++++
 arch/arm/boot/dts/am335x-cm-t335.dts               | 55 ++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  2 +-
 drivers/net/wireless/ti/wlcore/spi.c               | 86 +++++++++++++++++++++-
 4 files changed, 174 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt

-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 0/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Add DT support for WLS1271 SPI driver.
Add power operation function to the WLS1271 SPI driver.

Uri Mashiach (3):
  wlcore/wl12xx: spi: add power operation function
  wlcore/wl12xx: spi: add device tree support
  wlcore/wl12xx: spi: add wifi support to cm-t335

 .../bindings/net/wireless/ti,wlcore,spi.txt        | 36 +++++++++
 arch/arm/boot/dts/am335x-cm-t335.dts               | 55 ++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  2 +-
 drivers/net/wireless/ti/wlcore/spi.c               | 86 +++++++++++++++++++++-
 4 files changed, 174 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt

-- 
2.5.0

[PATCH v4 0/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Add DT support for WLS1271 SPI driver.
Add power operation function to the WLS1271 SPI driver.

Uri Mashiach (3):
  wlcore/wl12xx: spi: add power operation function
  wlcore/wl12xx: spi: add device tree support
  wlcore/wl12xx: spi: add wifi support to cm-t335

 .../bindings/net/wireless/ti,wlcore,spi.txt        | 36 +++++++++
 arch/arm/boot/dts/am335x-cm-t335.dts               | 55 ++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  2 +-
 drivers/net/wireless/ti/wlcore/spi.c               | 86 +++++++++++++++++++++-
 4 files changed, 174 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt

-- 
2.5.0

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Uri Mashiach]

The power function uses a consumer regulator access to update the WiFi
enable GPIO value.

Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
---
v1 -> v2: oops fix was removed to a separate fix.
v2 -> v3: no changes
v3 -> v4: update devm_regulator_get() error handling.

 drivers/net/wireless/ti/wlcore/spi.c | 39 ++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 44f059f..dec1512 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
 #include "wl12xx_80211.h"
@@ -81,6 +82,7 @@
 struct wl12xx_spi_glue {
 	struct device *dev;
 	struct platform_device *core;
+	struct regulator *reg; /* Power regulator */
 };
 
 static void wl12xx_spi_reset(struct device *child)
@@ -318,11 +320,40 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
 	return 0;
 }
 
+/**
+ * wl12xx_spi_set_power - power on/off the wl12xx unit
+ * @child: wl12xx device handle.
+ * @enable: true/false to power on/off the unit.
+ *
+ * use the WiFi enable regulator to enable/disable the WiFi unit.
+ */
+static int wl12xx_spi_set_power(struct device *child, bool enable)
+{
+	int ret = 0;
+	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
+
+	WARN_ON(!glue->reg);
+
+	/* Update regulator state */
+	if (enable) {
+		ret = regulator_enable(glue->reg);
+		if (ret)
+			dev_err(child, "Power enable failure\n");
+	} else {
+		ret =  regulator_disable(glue->reg);
+		if (ret)
+			dev_err(child, "Power disable failure\n");
+	}
+
+	return ret;
+}
+
 static struct wl1271_if_operations spi_ops = {
 	.read		= wl12xx_spi_raw_read,
 	.write		= wl12xx_spi_raw_write,
 	.reset		= wl12xx_spi_reset,
 	.init		= wl12xx_spi_init,
+	.power		= wl12xx_spi_set_power,
 	.set_block_size = NULL,
 };
 
@@ -353,6 +384,14 @@ static int wl1271_probe(struct spi_device *spi)
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
 
+	glue->reg = devm_regulator_get(&spi->dev, "vwlan");
+	if (PTR_ERR(glue->reg) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (IS_ERR(glue->reg)) {
+		dev_err(glue->dev, "can't get regulator\n");
+		return PTR_ERR(glue->reg);
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Uri Mashiach]

The power function uses a consumer regulator access to update the WiFi
enable GPIO value.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
---
v1 -> v2: oops fix was removed to a separate fix.
v2 -> v3: no changes
v3 -> v4: update devm_regulator_get() error handling.

 drivers/net/wireless/ti/wlcore/spi.c | 39 ++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 44f059f..dec1512 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
 #include "wl12xx_80211.h"
@@ -81,6 +82,7 @@
 struct wl12xx_spi_glue {
 	struct device *dev;
 	struct platform_device *core;
+	struct regulator *reg; /* Power regulator */
 };
 
 static void wl12xx_spi_reset(struct device *child)
@@ -318,11 +320,40 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
 	return 0;
 }
 
+/**
+ * wl12xx_spi_set_power - power on/off the wl12xx unit
+ * @child: wl12xx device handle.
+ * @enable: true/false to power on/off the unit.
+ *
+ * use the WiFi enable regulator to enable/disable the WiFi unit.
+ */
+static int wl12xx_spi_set_power(struct device *child, bool enable)
+{
+	int ret = 0;
+	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
+
+	WARN_ON(!glue->reg);
+
+	/* Update regulator state */
+	if (enable) {
+		ret = regulator_enable(glue->reg);
+		if (ret)
+			dev_err(child, "Power enable failure\n");
+	} else {
+		ret =  regulator_disable(glue->reg);
+		if (ret)
+			dev_err(child, "Power disable failure\n");
+	}
+
+	return ret;
+}
+
 static struct wl1271_if_operations spi_ops = {
 	.read		= wl12xx_spi_raw_read,
 	.write		= wl12xx_spi_raw_write,
 	.reset		= wl12xx_spi_reset,
 	.init		= wl12xx_spi_init,
+	.power		= wl12xx_spi_set_power,
 	.set_block_size = NULL,
 };
 
@@ -353,6 +384,14 @@ static int wl1271_probe(struct spi_device *spi)
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
 
+	glue->reg = devm_regulator_get(&spi->dev, "vwlan");
+	if (PTR_ERR(glue->reg) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (IS_ERR(glue->reg)) {
+		dev_err(glue->dev, "can't get regulator\n");
+		return PTR_ERR(glue->reg);
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
-- 
2.5.0

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Uri Mashiach]

The power function uses a consumer regulator access to update the WiFi
enable GPIO value.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
---
v1 -> v2: oops fix was removed to a separate fix.
v2 -> v3: no changes
v3 -> v4: update devm_regulator_get() error handling.

 drivers/net/wireless/ti/wlcore/spi.c | 39 ++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 44f059f..dec1512 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
 #include "wl12xx_80211.h"
@@ -81,6 +82,7 @@
 struct wl12xx_spi_glue {
 	struct device *dev;
 	struct platform_device *core;
+	struct regulator *reg; /* Power regulator */
 };
 
 static void wl12xx_spi_reset(struct device *child)
@@ -318,11 +320,40 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
 	return 0;
 }
 
+/**
+ * wl12xx_spi_set_power - power on/off the wl12xx unit
+ * @child: wl12xx device handle.
+ * @enable: true/false to power on/off the unit.
+ *
+ * use the WiFi enable regulator to enable/disable the WiFi unit.
+ */
+static int wl12xx_spi_set_power(struct device *child, bool enable)
+{
+	int ret = 0;
+	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
+
+	WARN_ON(!glue->reg);
+
+	/* Update regulator state */
+	if (enable) {
+		ret = regulator_enable(glue->reg);
+		if (ret)
+			dev_err(child, "Power enable failure\n");
+	} else {
+		ret =  regulator_disable(glue->reg);
+		if (ret)
+			dev_err(child, "Power disable failure\n");
+	}
+
+	return ret;
+}
+
 static struct wl1271_if_operations spi_ops = {
 	.read		= wl12xx_spi_raw_read,
 	.write		= wl12xx_spi_raw_write,
 	.reset		= wl12xx_spi_reset,
 	.init		= wl12xx_spi_init,
+	.power		= wl12xx_spi_set_power,
 	.set_block_size = NULL,
 };
 
@@ -353,6 +384,14 @@ static int wl1271_probe(struct spi_device *spi)
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
 
+	glue->reg = devm_regulator_get(&spi->dev, "vwlan");
+	if (PTR_ERR(glue->reg) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (IS_ERR(glue->reg)) {
+		dev_err(glue->dev, "can't get regulator\n");
+		return PTR_ERR(glue->reg);
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
-- 
2.5.0

Re: [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 367 bytes --]

Hi,

On Wed, Dec 30, 2015 at 03:35:31PM +0200, Uri Mashiach wrote:
> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>

[On Nokia N950]
Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Sebastian Reichel]

Hi,

On Wed, Dec 30, 2015 at 03:35:31PM +0200, Uri Mashiach wrote:
> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>

[On Nokia N950]
Tested-By: Sebastian Reichel <sre@kernel.org>

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160109/46270873/attachment-0001.sig>

Re: [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 313 bytes --]

Hi,

On Wed, Dec 30, 2015 at 03:35:31PM +0200, Uri Mashiach wrote:
> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>

[On Nokia N950]
Tested-By: Sebastian Reichel <sre@kernel.org>

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Grygorii Strashko]

On 01/09/2016 04:53 AM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Dec 30, 2015 at 03:35:31PM +0200, Uri Mashiach wrote:
>> The power function uses a consumer regulator access to update the WiFi
>> enable GPIO value.
>>
>> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
>
> [On Nokia N950]
> Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>


Reviewed-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>

Thanks.
-- 
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Grygorii Strashko]

On 01/09/2016 04:53 AM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Dec 30, 2015 at 03:35:31PM +0200, Uri Mashiach wrote:
>> The power function uses a consumer regulator access to update the WiFi
>> enable GPIO value.
>>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>
> [On Nokia N950]
> Tested-By: Sebastian Reichel <sre@kernel.org>


Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

Thanks.
-- 
regards,
-grygorii

Re: [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Grygorii Strashko]

On 01/09/2016 04:53 AM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Dec 30, 2015 at 03:35:31PM +0200, Uri Mashiach wrote:
>> The power function uses a consumer regulator access to update the WiFi
>> enable GPIO value.
>>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>
> [On Nokia N950]
> Tested-By: Sebastian Reichel <sre@kernel.org>


Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

Thanks.
-- 
regards,
-grygorii

Re: [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>

Acked-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>


-- 
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>


-- 
Regards,
Igor.

Re: [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>


-- 
Regards,
Igor.

Re: [v4,1/3] wlcore/wl12xx: spi: add power operation function

[Kalle Valo]

> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Reviewed-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
> Acked-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>

Thanks, 2 patches applied to wireless-drivers-next.git:

4c1ce07bcf62 wlcore/wl12xx: spi: add power operation function
04654c386145 wlcore/wl12xx: spi: add device tree support

Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [v4,1/3] wlcore/wl12xx: spi: add power operation function

[Kalle Valo]

> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Tested-By: Sebastian Reichel <sre@kernel.org>
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Thanks, 2 patches applied to wireless-drivers-next.git:

4c1ce07bcf62 wlcore/wl12xx: spi: add power operation function
04654c386145 wlcore/wl12xx: spi: add device tree support

Kalle Valo

Re: [v4,1/3] wlcore/wl12xx: spi: add power operation function

[Kalle Valo]

> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Tested-By: Sebastian Reichel <sre@kernel.org>
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Thanks, 2 patches applied to wireless-drivers-next.git:

4c1ce07bcf62 wlcore/wl12xx: spi: add power operation function
04654c386145 wlcore/wl12xx: spi: add device tree support

Kalle Valo

Re: [v4,1/3] wlcore/wl12xx: spi: add power operation function

[Kalle Valo]

> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Tested-By: Sebastian Reichel <sre@kernel.org>
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Thanks, 2 patches applied to wireless-drivers-next.git:

4c1ce07bcf62 wlcore/wl12xx: spi: add power operation function
04654c386145 wlcore/wl12xx: spi: add device tree support

Kalle Valo

[v4,1/3] wlcore/wl12xx: spi: add power operation function

[Kalle Valo]

> The power function uses a consumer regulator access to update the WiFi
> enable GPIO value.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Tested-By: Sebastian Reichel <sre@kernel.org>
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Thanks, 2 patches applied to wireless-drivers-next.git:

4c1ce07bcf62 wlcore/wl12xx: spi: add power operation function
04654c386145 wlcore/wl12xx: spi: add device tree support

Kalle Valo

[PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Uri Mashiach]

Add DT support for the wl1271 SPI WiFi.

Add documentation file for the wl1271 SPI WiFi.

Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
v1 -> v2: update interrupt documentation.
          replace interrupts and interrupt-parent with interrupts-extended.
	  IRQ parameters retrieved from spi_device instead of DT.
	  remove redundant #ifdef CONFIG_OF
v2 -> v3: Add MODULE_DEVICE_TABLE.
          Remove #ifdef CONFIG_OF.
	  Make the Kconfig symbol to depend on OF.
	  Replace irqd_get_trigger_type() with irq_get_trigger_type().
v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
          According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
	  interrupts-extended should only be used when a device has multiple interrupt parents.

 .../bindings/net/wireless/ti,wlcore,spi.txt        | 36 +++++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  2 +-
 drivers/net/wireless/ti/wlcore/spi.c               | 47 ++++++++++++++++++++--
 3 files changed, 80 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
new file mode 100644
index 0000000..9180724
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
@@ -0,0 +1,36 @@
+* Texas Instruments wl1271 wireless lan controller
+
+The wl1271 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :          Should be "ti,wl1271"
+- reg :                 Chip select address of device
+- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
+- ref-clock-frequency : Reference clock frequency
+- interrupt-parent, interrupts :
+                        Should contain parameters for 1 interrupt line.
+                        Interrupt parameters: parent, line number, type.
+- vwlan-supply :        Point the node of the regulator that powers/enable the wl1271 chip
+
+Optional properties:
+- clock-xtal :          boolean, clock is generated from XTAL
+
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1271@1 {
+		compatible = "ti,wl1271";
+
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 7c09954..5918080 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -13,7 +13,7 @@ config WLCORE
 
 config WLCORE_SPI
 	tristate "TI wlcore SPI support"
-	depends on WLCORE && SPI_MASTER
+	depends on WLCORE && SPI_MASTER && OF
 	select CRC7
 	---help---
 	  This module adds support for the SPI interface of adapters using
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index dec1512..020ac1a 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/of_irq.h>
 #include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
@@ -357,6 +358,39 @@ static struct wl1271_if_operations spi_ops = {
 	.set_block_size = NULL,
 };
 
+static const struct of_device_id wlcore_spi_of_match_table[] = {
+	{ .compatible = "ti,wl1271" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
+
+/**
+ * wlcore_probe_of - DT node parsing.
+ * @spi: SPI slave device parameters.
+ * @res: resource parameters.
+ * @glue: wl12xx SPI bus to slave device glue parameters.
+ * @pdev_data: wlcore device parameters
+ */
+static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
+			   struct wlcore_platdev_data *pdev_data)
+{
+	struct device_node *dt_node = spi->dev.of_node;
+	int ret;
+
+	if (of_find_property(dt_node, "clock-xtal", NULL))
+		pdev_data->ref_clock_xtal = true;
+
+	ret = of_property_read_u32(dt_node, "ref-clock-frequency",
+				   &pdev_data->ref_clock_freq);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(glue->dev,
+			"can't get reference clock frequency (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
@@ -366,8 +400,6 @@ static int wl1271_probe(struct spi_device *spi)
 
 	memset(&pdev_data, 0x00, sizeof(pdev_data));
 
-	/* TODO: add DT parsing when needed */
-
 	pdev_data.if_ops = &spi_ops;
 
 	glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
@@ -392,6 +424,13 @@ static int wl1271_probe(struct spi_device *spi)
 		return PTR_ERR(glue->reg);
 	}
 
+	ret = wlcore_probe_of(spi, glue, &pdev_data);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(glue->dev,
+			"can't get device tree parameters (%d)\n", ret);
+		return ret;
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
@@ -409,7 +448,7 @@ static int wl1271_probe(struct spi_device *spi)
 	memset(res, 0x00, sizeof(res));
 
 	res[0].start = spi->irq;
-	res[0].flags = IORESOURCE_IRQ;
+	res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq);
 	res[0].name = "irq";
 
 	ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
@@ -447,10 +486,10 @@ static int wl1271_remove(struct spi_device *spi)
 	return 0;
 }
 

[PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Uri Mashiach]

Add DT support for the wl1271 SPI WiFi.

Add documentation file for the wl1271 SPI WiFi.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
---
v1 -> v2: update interrupt documentation.
          replace interrupts and interrupt-parent with interrupts-extended.
	  IRQ parameters retrieved from spi_device instead of DT.
	  remove redundant #ifdef CONFIG_OF
v2 -> v3: Add MODULE_DEVICE_TABLE.
          Remove #ifdef CONFIG_OF.
	  Make the Kconfig symbol to depend on OF.
	  Replace irqd_get_trigger_type() with irq_get_trigger_type().
v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
          According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
	  interrupts-extended should only be used when a device has multiple interrupt parents.

 .../bindings/net/wireless/ti,wlcore,spi.txt        | 36 +++++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  2 +-
 drivers/net/wireless/ti/wlcore/spi.c               | 47 ++++++++++++++++++++--
 3 files changed, 80 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
new file mode 100644
index 0000000..9180724
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
@@ -0,0 +1,36 @@
+* Texas Instruments wl1271 wireless lan controller
+
+The wl1271 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :          Should be "ti,wl1271"
+- reg :                 Chip select address of device
+- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
+- ref-clock-frequency : Reference clock frequency
+- interrupt-parent, interrupts :
+                        Should contain parameters for 1 interrupt line.
+                        Interrupt parameters: parent, line number, type.
+- vwlan-supply :        Point the node of the regulator that powers/enable the wl1271 chip
+
+Optional properties:
+- clock-xtal :          boolean, clock is generated from XTAL
+
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1271 at 1 {
+		compatible = "ti,wl1271";
+
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 7c09954..5918080 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -13,7 +13,7 @@ config WLCORE
 
 config WLCORE_SPI
 	tristate "TI wlcore SPI support"
-	depends on WLCORE && SPI_MASTER
+	depends on WLCORE && SPI_MASTER && OF
 	select CRC7
 	---help---
 	  This module adds support for the SPI interface of adapters using
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index dec1512..020ac1a 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/of_irq.h>
 #include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
@@ -357,6 +358,39 @@ static struct wl1271_if_operations spi_ops = {
 	.set_block_size = NULL,
 };
 
+static const struct of_device_id wlcore_spi_of_match_table[] = {
+	{ .compatible = "ti,wl1271" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
+
+/**
+ * wlcore_probe_of - DT node parsing.
+ * @spi: SPI slave device parameters.
+ * @res: resource parameters.
+ * @glue: wl12xx SPI bus to slave device glue parameters.
+ * @pdev_data: wlcore device parameters
+ */
+static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
+			   struct wlcore_platdev_data *pdev_data)
+{
+	struct device_node *dt_node = spi->dev.of_node;
+	int ret;
+
+	if (of_find_property(dt_node, "clock-xtal", NULL))
+		pdev_data->ref_clock_xtal = true;
+
+	ret = of_property_read_u32(dt_node, "ref-clock-frequency",
+				   &pdev_data->ref_clock_freq);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(glue->dev,
+			"can't get reference clock frequency (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
@@ -366,8 +400,6 @@ static int wl1271_probe(struct spi_device *spi)
 
 	memset(&pdev_data, 0x00, sizeof(pdev_data));
 
-	/* TODO: add DT parsing when needed */
-
 	pdev_data.if_ops = &spi_ops;
 
 	glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
@@ -392,6 +424,13 @@ static int wl1271_probe(struct spi_device *spi)
 		return PTR_ERR(glue->reg);
 	}
 
+	ret = wlcore_probe_of(spi, glue, &pdev_data);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(glue->dev,
+			"can't get device tree parameters (%d)\n", ret);
+		return ret;
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
@@ -409,7 +448,7 @@ static int wl1271_probe(struct spi_device *spi)
 	memset(res, 0x00, sizeof(res));
 
 	res[0].start = spi->irq;
-	res[0].flags = IORESOURCE_IRQ;
+	res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq);
 	res[0].name = "irq";
 
 	ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
@@ -447,10 +486,10 @@ static int wl1271_remove(struct spi_device *spi)
 	return 0;
 }
 
-
 static struct spi_driver wl1271_spi_driver = {
 	.driver = {
 		.name		= "wl1271_spi",
+		.of_match_table = of_match_ptr(wlcore_spi_of_match_table),
 	},
 
 	.probe		= wl1271_probe,
-- 
2.5.0

[PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Uri Mashiach]

Add DT support for the wl1271 SPI WiFi.

Add documentation file for the wl1271 SPI WiFi.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
---
v1 -> v2: update interrupt documentation.
          replace interrupts and interrupt-parent with interrupts-extended.
	  IRQ parameters retrieved from spi_device instead of DT.
	  remove redundant #ifdef CONFIG_OF
v2 -> v3: Add MODULE_DEVICE_TABLE.
          Remove #ifdef CONFIG_OF.
	  Make the Kconfig symbol to depend on OF.
	  Replace irqd_get_trigger_type() with irq_get_trigger_type().
v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
          According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
	  interrupts-extended should only be used when a device has multiple interrupt parents.

 .../bindings/net/wireless/ti,wlcore,spi.txt        | 36 +++++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  2 +-
 drivers/net/wireless/ti/wlcore/spi.c               | 47 ++++++++++++++++++++--
 3 files changed, 80 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
new file mode 100644
index 0000000..9180724
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
@@ -0,0 +1,36 @@
+* Texas Instruments wl1271 wireless lan controller
+
+The wl1271 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :          Should be "ti,wl1271"
+- reg :                 Chip select address of device
+- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
+- ref-clock-frequency : Reference clock frequency
+- interrupt-parent, interrupts :
+                        Should contain parameters for 1 interrupt line.
+                        Interrupt parameters: parent, line number, type.
+- vwlan-supply :        Point the node of the regulator that powers/enable the wl1271 chip
+
+Optional properties:
+- clock-xtal :          boolean, clock is generated from XTAL
+
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1271@1 {
+		compatible = "ti,wl1271";
+
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 7c09954..5918080 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -13,7 +13,7 @@ config WLCORE
 
 config WLCORE_SPI
 	tristate "TI wlcore SPI support"
-	depends on WLCORE && SPI_MASTER
+	depends on WLCORE && SPI_MASTER && OF
 	select CRC7
 	---help---
 	  This module adds support for the SPI interface of adapters using
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index dec1512..020ac1a 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_device.h>
+#include <linux/of_irq.h>
 #include <linux/regulator/consumer.h>
 
 #include "wlcore.h"
@@ -357,6 +358,39 @@ static struct wl1271_if_operations spi_ops = {
 	.set_block_size = NULL,
 };
 
+static const struct of_device_id wlcore_spi_of_match_table[] = {
+	{ .compatible = "ti,wl1271" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
+
+/**
+ * wlcore_probe_of - DT node parsing.
+ * @spi: SPI slave device parameters.
+ * @res: resource parameters.
+ * @glue: wl12xx SPI bus to slave device glue parameters.
+ * @pdev_data: wlcore device parameters
+ */
+static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
+			   struct wlcore_platdev_data *pdev_data)
+{
+	struct device_node *dt_node = spi->dev.of_node;
+	int ret;
+
+	if (of_find_property(dt_node, "clock-xtal", NULL))
+		pdev_data->ref_clock_xtal = true;
+
+	ret = of_property_read_u32(dt_node, "ref-clock-frequency",
+				   &pdev_data->ref_clock_freq);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(glue->dev,
+			"can't get reference clock frequency (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
@@ -366,8 +400,6 @@ static int wl1271_probe(struct spi_device *spi)
 
 	memset(&pdev_data, 0x00, sizeof(pdev_data));
 
-	/* TODO: add DT parsing when needed */
-
 	pdev_data.if_ops = &spi_ops;
 
 	glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
@@ -392,6 +424,13 @@ static int wl1271_probe(struct spi_device *spi)
 		return PTR_ERR(glue->reg);
 	}
 
+	ret = wlcore_probe_of(spi, glue, &pdev_data);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(glue->dev,
+			"can't get device tree parameters (%d)\n", ret);
+		return ret;
+	}
+
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(glue->dev, "spi_setup failed\n");
@@ -409,7 +448,7 @@ static int wl1271_probe(struct spi_device *spi)
 	memset(res, 0x00, sizeof(res));
 
 	res[0].start = spi->irq;
-	res[0].flags = IORESOURCE_IRQ;
+	res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq);
 	res[0].name = "irq";
 
 	ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
@@ -447,10 +486,10 @@ static int wl1271_remove(struct spi_device *spi)
 	return 0;
 }
 
-
 static struct spi_driver wl1271_spi_driver = {
 	.driver = {
 		.name		= "wl1271_spi",
+		.of_match_table = of_match_ptr(wlcore_spi_of_match_table),
 	},
 
 	.probe		= wl1271_probe,
-- 
2.5.0

Re: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 441 bytes --]

Hi,

On Wed, Dec 30, 2015 at 03:35:32PM +0200, Uri Mashiach wrote:
> Add DT support for the wl1271 SPI WiFi.
> 
> Add documentation file for the wl1271 SPI WiFi.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[On Nokia N950]
Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Sebastian Reichel]

Hi,

On Wed, Dec 30, 2015 at 03:35:32PM +0200, Uri Mashiach wrote:
> Add DT support for the wl1271 SPI WiFi.
> 
> Add documentation file for the wl1271 SPI WiFi.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Acked-by: Rob Herring <robh@kernel.org>

[On Nokia N950]
Tested-By: Sebastian Reichel <sre@kernel.org>

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160109/9774d81e/attachment.sig>

Re: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 358 bytes --]

Hi,

On Wed, Dec 30, 2015 at 03:35:32PM +0200, Uri Mashiach wrote:
> Add DT support for the wl1271 SPI WiFi.
> 
> Add documentation file for the wl1271 SPI WiFi.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Acked-by: Rob Herring <robh@kernel.org>

[On Nokia N950]
Tested-By: Sebastian Reichel <sre@kernel.org>

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Grygorii Strashko]

On 01/09/2016 04:56 AM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Dec 30, 2015 at 03:35:32PM +0200, Uri Mashiach wrote:
>> Add DT support for the wl1271 SPI WiFi.
>>
>> Add documentation file for the wl1271 SPI WiFi.
>>
>> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
>> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>
> [On Nokia N950]
> Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>


Reviewed-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>

Thanks.--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Grygorii Strashko]

On 01/09/2016 04:56 AM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Dec 30, 2015 at 03:35:32PM +0200, Uri Mashiach wrote:
>> Add DT support for the wl1271 SPI WiFi.
>>
>> Add documentation file for the wl1271 SPI WiFi.
>>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>> Acked-by: Rob Herring <robh@kernel.org>
>
> [On Nokia N950]
> Tested-By: Sebastian Reichel <sre@kernel.org>


Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

Thanks.--
regards,
-grygorii

Re: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Grygorii Strashko]

On 01/09/2016 04:56 AM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Dec 30, 2015 at 03:35:32PM +0200, Uri Mashiach wrote:
>> Add DT support for the wl1271 SPI WiFi.
>>
>> Add documentation file for the wl1271 SPI WiFi.
>>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>> Acked-by: Rob Herring <robh@kernel.org>
>
> [On Nokia N950]
> Tested-By: Sebastian Reichel <sre@kernel.org>


Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

Thanks.--
regards,
-grygorii

Re: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> Add DT support for the wl1271 SPI WiFi.
> 
> Add documentation file for the wl1271 SPI WiFi.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Acked-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>


-- 
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> Add DT support for the wl1271 SPI WiFi.
> 
> Add documentation file for the wl1271 SPI WiFi.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Acked-by: Rob Herring <robh@kernel.org>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>


-- 
Regards,
Igor.

Re: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> Add DT support for the wl1271 SPI WiFi.
> 
> Add documentation file for the wl1271 SPI WiFi.
> 
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> Acked-by: Rob Herring <robh@kernel.org>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>


-- 
Regards,
Igor.

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Device tree modifications:
- Pinmux for SPI0 and WiFi GPIOs.
- SPI0 node with wlcore as a child node.

Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
---
v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
          According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
	  interrupts-extended should only be used when a device has multiple interrupt parents.

 arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 42e9b66..65f1099 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "CompuLab CM-T335";
@@ -40,6 +41,15 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+		regulator-boot-off;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
@@ -223,6 +233,21 @@
 		>;
 	};
 
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			/* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
+			/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
+			/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
+			/* spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
 	/* wl1271 bluetooth */
 	bluetooth_pins: pinmux_bluetooth_pins {
 		pinctrl-single,pins = <
@@ -230,6 +255,16 @@
 			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
 };
 
 &uart0 {
@@ -394,3 +429,23 @@ status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in = <1>;
+	/* WLS1271 WiFi */
+	wlcore: wlcore@1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Device tree modifications:
- Pinmux for SPI0 and WiFi GPIOs.
- SPI0 node with wlcore as a child node.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
---
v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
          According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
	  interrupts-extended should only be used when a device has multiple interrupt parents.

 arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 42e9b66..65f1099 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "CompuLab CM-T335";
@@ -40,6 +41,15 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator at 2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+		regulator-boot-off;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
@@ -223,6 +233,21 @@
 		>;
 	};
 
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			/* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
+			/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
+			/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
+			/* spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
 	/* wl1271 bluetooth */
 	bluetooth_pins: pinmux_bluetooth_pins {
 		pinctrl-single,pins = <
@@ -230,6 +255,16 @@
 			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
 };
 
 &uart0 {
@@ -394,3 +429,23 @@ status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in = <1>;
+	/* WLS1271 WiFi */
+	wlcore: wlcore at 1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
-- 
2.5.0

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Device tree modifications:
- Pinmux for SPI0 and WiFi GPIOs.
- SPI0 node with wlcore as a child node.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
---
v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
          According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
	  interrupts-extended should only be used when a device has multiple interrupt parents.

 arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 42e9b66..65f1099 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "CompuLab CM-T335";
@@ -40,6 +41,15 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+		regulator-boot-off;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
@@ -223,6 +233,21 @@
 		>;
 	};
 
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			/* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
+			/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
+			/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
+			/* spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
 	/* wl1271 bluetooth */
 	bluetooth_pins: pinmux_bluetooth_pins {
 		pinctrl-single,pins = <
@@ -230,6 +255,16 @@
 			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
 };
 
 &uart0 {
@@ -394,3 +429,23 @@ status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in = <1>;
+	/* WLS1271 WiFi */
+	wlcore: wlcore@1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
-- 
2.5.0

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> writes:

> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
>
> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> ---
> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>
>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)

To what tree should this patch go? My wireless-drivers-next tree doesn't
even have this file.

https://patchwork.kernel.org/patch/7933441/

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Uri Mashiach <uri.mashiach@compulab.co.il> writes:

> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> ---
> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>
>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)

To what tree should this patch go? My wireless-drivers-next tree doesn't
even have this file.

https://patchwork.kernel.org/patch/7933441/

-- 
Kalle Valo

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Uri Mashiach <uri.mashiach@compulab.co.il> writes:

> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> ---
> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>
>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)

To what tree should this patch go? My wireless-drivers-next tree doesn't
even have this file.

https://patchwork.kernel.org/patch/7933441/

-- 
Kalle Valo

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Hi Kalle Valo,

On 01/07/2016 11:02 AM, Kalle Valo wrote:
> Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> writes:
>
>> Device tree modifications:
>> - Pinmux for SPI0 and WiFi GPIOs.
>> - SPI0 node with wlcore as a child node.
>>
>> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
>> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
>> ---
>> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
>> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
>> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>>            According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
>> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>>
>>   arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>
> To what tree should this patch go? My wireless-drivers-next tree doesn't
> even have this file.

Should be applied into omap-for-v4.x/dt

>
> https://patchwork.kernel.org/patch/7933441/
>

-- 
Thanks,
Uri
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Hi Kalle Valo,

On 01/07/2016 11:02 AM, Kalle Valo wrote:
> Uri Mashiach <uri.mashiach@compulab.co.il> writes:
>
>> Device tree modifications:
>> - Pinmux for SPI0 and WiFi GPIOs.
>> - SPI0 node with wlcore as a child node.
>>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>> ---
>> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
>> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
>> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>>            According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
>> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>>
>>   arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>
> To what tree should this patch go? My wireless-drivers-next tree doesn't
> even have this file.

Should be applied into omap-for-v4.x/dt

>
> https://patchwork.kernel.org/patch/7933441/
>

-- 
Thanks,
Uri

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Uri Mashiach]

Hi Kalle Valo,

On 01/07/2016 11:02 AM, Kalle Valo wrote:
> Uri Mashiach <uri.mashiach@compulab.co.il> writes:
>
>> Device tree modifications:
>> - Pinmux for SPI0 and WiFi GPIOs.
>> - SPI0 node with wlcore as a child node.
>>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>> ---
>> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
>> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
>> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>>            According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
>> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>>
>>   arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>
> To what tree should this patch go? My wireless-drivers-next tree doesn't
> even have this file.

Should be applied into omap-for-v4.x/dt

>
> https://patchwork.kernel.org/patch/7933441/
>

-- 
Thanks,
Uri

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Igor Grinberg]

Hi Kalle Valo,

On 01/07/16 11:02, Kalle Valo wrote:
> Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> writes:
> 
>> Device tree modifications:
>> - Pinmux for SPI0 and WiFi GPIOs.
>> - SPI0 node with wlcore as a child node.
>>
>> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
>> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
>> ---

Uri, please document the dependencies next time. Thanks!

>> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
>> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
>> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
>> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>>
>>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 55 insertions(+)
> 
> To what tree should this patch go? My wireless-drivers-next tree doesn't
> even have this file.

Right. It will hit the mainline during this merge window through Tony's and
arm-soc trees.

Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
will take the 3/3 (there is no code dependency between first two and the last one),
or we can just wait till arm-soc hits the mainline, so you will have the
needed code?

> 
> https://patchwork.kernel.org/patch/7933441/
> 

-- 
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Igor Grinberg]

Hi Kalle Valo,

On 01/07/16 11:02, Kalle Valo wrote:
> Uri Mashiach <uri.mashiach@compulab.co.il> writes:
> 
>> Device tree modifications:
>> - Pinmux for SPI0 and WiFi GPIOs.
>> - SPI0 node with wlcore as a child node.
>>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>> ---

Uri, please document the dependencies next time. Thanks!

>> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
>> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
>> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
>> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>>
>>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 55 insertions(+)
> 
> To what tree should this patch go? My wireless-drivers-next tree doesn't
> even have this file.

Right. It will hit the mainline during this merge window through Tony's and
arm-soc trees.

Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
will take the 3/3 (there is no code dependency between first two and the last one),
or we can just wait till arm-soc hits the mainline, so you will have the
needed code?

> 
> https://patchwork.kernel.org/patch/7933441/
> 

-- 
Regards,
Igor.

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Igor Grinberg]

Hi Kalle Valo,

On 01/07/16 11:02, Kalle Valo wrote:
> Uri Mashiach <uri.mashiach@compulab.co.il> writes:
> 
>> Device tree modifications:
>> - Pinmux for SPI0 and WiFi GPIOs.
>> - SPI0 node with wlcore as a child node.
>>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
>> ---

Uri, please document the dependencies next time. Thanks!

>> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
>> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
>> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
>>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
>> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
>>
>>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 55 insertions(+)
> 
> To what tree should this patch go? My wireless-drivers-next tree doesn't
> even have this file.

Right. It will hit the mainline during this merge window through Tony's and
arm-soc trees.

Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
will take the 3/3 (there is no code dependency between first two and the last one),
or we can just wait till arm-soc hits the mainline, so you will have the
needed code?

> 
> https://patchwork.kernel.org/patch/7933441/
> 

-- 
Regards,
Igor.

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> [160112 22:01]:
> Hi Kalle Valo,
> 
> On 01/07/16 11:02, Kalle Valo wrote:
> > Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> writes:
> > 
> >> Device tree modifications:
> >> - Pinmux for SPI0 and WiFi GPIOs.
> >> - SPI0 node with wlcore as a child node.
> >>
> >> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> >> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> >> ---
> 
> Uri, please document the dependencies next time. Thanks!
> 
> >> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> >> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> >> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
> >>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> >> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
> >>
> >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
> >>  1 file changed, 55 insertions(+)
> > 
> > To what tree should this patch go? My wireless-drivers-next tree doesn't
> > even have this file.
> 
> Right. It will hit the mainline during this merge window through Tony's and
> arm-soc trees.
> 
> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
> will take the 3/3 (there is no code dependency between first two and the last one),
> or we can just wait till arm-soc hits the mainline, so you will have the
> needed code?

Yeah I'll pick the dts changes separately after the merge window as
there is no dependency to the driver changes.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Igor Grinberg <grinberg@compulab.co.il> [160112 22:01]:
> Hi Kalle Valo,
> 
> On 01/07/16 11:02, Kalle Valo wrote:
> > Uri Mashiach <uri.mashiach@compulab.co.il> writes:
> > 
> >> Device tree modifications:
> >> - Pinmux for SPI0 and WiFi GPIOs.
> >> - SPI0 node with wlcore as a child node.
> >>
> >> Cc: Tony Lindgren <tony@atomide.com>
> >> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> >> ---
> 
> Uri, please document the dependencies next time. Thanks!
> 
> >> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> >> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> >> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
> >>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> >> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
> >>
> >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
> >>  1 file changed, 55 insertions(+)
> > 
> > To what tree should this patch go? My wireless-drivers-next tree doesn't
> > even have this file.
> 
> Right. It will hit the mainline during this merge window through Tony's and
> arm-soc trees.
> 
> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
> will take the 3/3 (there is no code dependency between first two and the last one),
> or we can just wait till arm-soc hits the mainline, so you will have the
> needed code?

Yeah I'll pick the dts changes separately after the merge window as
there is no dependency to the driver changes.

Regards,

Tony

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Igor Grinberg <grinberg@compulab.co.il> [160112 22:01]:
> Hi Kalle Valo,
> 
> On 01/07/16 11:02, Kalle Valo wrote:
> > Uri Mashiach <uri.mashiach@compulab.co.il> writes:
> > 
> >> Device tree modifications:
> >> - Pinmux for SPI0 and WiFi GPIOs.
> >> - SPI0 node with wlcore as a child node.
> >>
> >> Cc: Tony Lindgren <tony@atomide.com>
> >> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> >> ---
> 
> Uri, please document the dependencies next time. Thanks!
> 
> >> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> >> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> >> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
> >>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> >> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
> >>
> >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
> >>  1 file changed, 55 insertions(+)
> > 
> > To what tree should this patch go? My wireless-drivers-next tree doesn't
> > even have this file.
> 
> Right. It will hit the mainline during this merge window through Tony's and
> arm-soc trees.
> 
> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
> will take the 3/3 (there is no code dependency between first two and the last one),
> or we can just wait till arm-soc hits the mainline, so you will have the
> needed code?

Yeah I'll pick the dts changes separately after the merge window as
there is no dependency to the driver changes.

Regards,

Tony

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> writes:

>> >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>> >>  1 file changed, 55 insertions(+)
>> > 
>> > To what tree should this patch go? My wireless-drivers-next tree doesn't
>> > even have this file.
>> 
>> Right. It will hit the mainline during this merge window through Tony's and
>> arm-soc trees.
>> 
>> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
>> will take the 3/3 (there is no code dependency between first two and the last one),
>> or we can just wait till arm-soc hits the mainline, so you will have the
>> needed code?
>
> Yeah I'll pick the dts changes separately after the merge window as
> there is no dependency to the driver changes.

Ok, I'll then take patches 1 and 2 once the merge window opens.

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Tony Lindgren <tony@atomide.com> writes:

>> >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>> >>  1 file changed, 55 insertions(+)
>> > 
>> > To what tree should this patch go? My wireless-drivers-next tree doesn't
>> > even have this file.
>> 
>> Right. It will hit the mainline during this merge window through Tony's and
>> arm-soc trees.
>> 
>> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
>> will take the 3/3 (there is no code dependency between first two and the last one),
>> or we can just wait till arm-soc hits the mainline, so you will have the
>> needed code?
>
> Yeah I'll pick the dts changes separately after the merge window as
> there is no dependency to the driver changes.

Ok, I'll then take patches 1 and 2 once the merge window opens.

-- 
Kalle Valo

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Tony Lindgren <tony@atomide.com> writes:

>> >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>> >>  1 file changed, 55 insertions(+)
>> > 
>> > To what tree should this patch go? My wireless-drivers-next tree doesn't
>> > even have this file.
>> 
>> Right. It will hit the mainline during this merge window through Tony's and
>> arm-soc trees.
>> 
>> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
>> will take the 3/3 (there is no code dependency between first two and the last one),
>> or we can just wait till arm-soc hits the mainline, so you will have the
>> needed code?
>
> Yeah I'll pick the dts changes separately after the merge window as
> there is no dependency to the driver changes.

Ok, I'll then take patches 1 and 2 once the merge window opens.

-- 
Kalle Valo

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Arend van Spriel]

On 01/14/2016 08:05 AM, Kalle Valo wrote:
> Tony Lindgren <tony@atomide.com> writes:
>
>>>>>   arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>>>>   1 file changed, 55 insertions(+)
>>>>
>>>> To what tree should this patch go? My wireless-drivers-next tree doesn't
>>>> even have this file.
>>>
>>> Right. It will hit the mainline during this merge window through Tony's and
>>> arm-soc trees.
>>>
>>> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
>>> will take the 3/3 (there is no code dependency between first two and the last one),
>>> or we can just wait till arm-soc hits the mainline, so you will have the
>>> needed code?
>>
>> Yeah I'll pick the dts changes separately after the merge window as
>> there is no dependency to the driver changes.
>
> Ok, I'll then take patches 1 and 2 once the merge window opens.

I guess it is semantics, but the merge window is open right now so you 
probably mean to say after the merge window closes, ie. when 4.5-rc1 is 
ready.

Regards,
Arend

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Arend van Spriel]

On 01/14/2016 08:05 AM, Kalle Valo wrote:
> Tony Lindgren <tony@atomide.com> writes:
>
>>>>>   arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>>>>   1 file changed, 55 insertions(+)
>>>>
>>>> To what tree should this patch go? My wireless-drivers-next tree doesn't
>>>> even have this file.
>>>
>>> Right. It will hit the mainline during this merge window through Tony's and
>>> arm-soc trees.
>>>
>>> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
>>> will take the 3/3 (there is no code dependency between first two and the last one),
>>> or we can just wait till arm-soc hits the mainline, so you will have the
>>> needed code?
>>
>> Yeah I'll pick the dts changes separately after the merge window as
>> there is no dependency to the driver changes.
>
> Ok, I'll then take patches 1 and 2 once the merge window opens.

I guess it is semantics, but the merge window is open right now so you 
probably mean to say after the merge window closes, ie. when 4.5-rc1 is 
ready.

Regards,
Arend

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Arend van Spriel]

On 01/14/2016 08:05 AM, Kalle Valo wrote:
> Tony Lindgren <tony@atomide.com> writes:
>
>>>>>   arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
>>>>>   1 file changed, 55 insertions(+)
>>>>
>>>> To what tree should this patch go? My wireless-drivers-next tree doesn't
>>>> even have this file.
>>>
>>> Right. It will hit the mainline during this merge window through Tony's and
>>> arm-soc trees.
>>>
>>> Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
>>> will take the 3/3 (there is no code dependency between first two and the last one),
>>> or we can just wait till arm-soc hits the mainline, so you will have the
>>> needed code?
>>
>> Yeah I'll pick the dts changes separately after the merge window as
>> there is no dependency to the driver changes.
>
> Ok, I'll then take patches 1 and 2 once the merge window opens.

I guess it is semantics, but the merge window is open right now so you 
probably mean to say after the merge window closes, ie. when 4.5-rc1 is 
ready.

Regards,
Arend

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Arend van Spriel <arend-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> writes:

> On 01/14/2016 08:05 AM, Kalle Valo wrote:
>> Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> writes:
>>
>>> Yeah I'll pick the dts changes separately after the merge window as
>>> there is no dependency to the driver changes.
>>
>> Ok, I'll then take patches 1 and 2 once the merge window opens.
>
> I guess it is semantics, but the merge window is open right now so you
> probably mean to say after the merge window closes, ie. when 4.5-rc1
> is ready.

Exactly. Sorry, I suck in multitasking :)

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Arend van Spriel <arend@broadcom.com> writes:

> On 01/14/2016 08:05 AM, Kalle Valo wrote:
>> Tony Lindgren <tony@atomide.com> writes:
>>
>>> Yeah I'll pick the dts changes separately after the merge window as
>>> there is no dependency to the driver changes.
>>
>> Ok, I'll then take patches 1 and 2 once the merge window opens.
>
> I guess it is semantics, but the merge window is open right now so you
> probably mean to say after the merge window closes, ie. when 4.5-rc1
> is ready.

Exactly. Sorry, I suck in multitasking :)

-- 
Kalle Valo

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Kalle Valo]

Arend van Spriel <arend@broadcom.com> writes:

> On 01/14/2016 08:05 AM, Kalle Valo wrote:
>> Tony Lindgren <tony@atomide.com> writes:
>>
>>> Yeah I'll pick the dts changes separately after the merge window as
>>> there is no dependency to the driver changes.
>>
>> Ok, I'll then take patches 1 and 2 once the merge window opens.
>
> I guess it is semantics, but the merge window is open right now so you
> probably mean to say after the merge window closes, ie. when 4.5-rc1
> is ready.

Exactly. Sorry, I suck in multitasking :)

-- 
Kalle Valo

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [160113 09:28]:
> * Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> [160112 22:01]:
> > Hi Kalle Valo,
> > 
> > On 01/07/16 11:02, Kalle Valo wrote:
> > > Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> writes:
> > > 
> > >> Device tree modifications:
> > >> - Pinmux for SPI0 and WiFi GPIOs.
> > >> - SPI0 node with wlcore as a child node.
> > >>
> > >> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> > >> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> > >> ---
> > 
> > Uri, please document the dependencies next time. Thanks!
> > 
> > >> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> > >> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> > >> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
> > >>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> > >> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
> > >>
> > >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
> > >>  1 file changed, 55 insertions(+)
> > > 
> > > To what tree should this patch go? My wireless-drivers-next tree doesn't
> > > even have this file.
> > 
> > Right. It will hit the mainline during this merge window through Tony's and
> > arm-soc trees.
> > 
> > Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
> > will take the 3/3 (there is no code dependency between first two and the last one),
> > or we can just wait till arm-soc hits the mainline, so you will have the
> > needed code?
> 
> Yeah I'll pick the dts changes separately after the merge window as
> there is no dependency to the driver changes.

Applying patch 3/3 into omap-for-v4.6/dt thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [160113 09:28]:
> * Igor Grinberg <grinberg@compulab.co.il> [160112 22:01]:
> > Hi Kalle Valo,
> > 
> > On 01/07/16 11:02, Kalle Valo wrote:
> > > Uri Mashiach <uri.mashiach@compulab.co.il> writes:
> > > 
> > >> Device tree modifications:
> > >> - Pinmux for SPI0 and WiFi GPIOs.
> > >> - SPI0 node with wlcore as a child node.
> > >>
> > >> Cc: Tony Lindgren <tony@atomide.com>
> > >> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> > >> ---
> > 
> > Uri, please document the dependencies next time. Thanks!
> > 
> > >> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> > >> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> > >> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
> > >>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> > >> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
> > >>
> > >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
> > >>  1 file changed, 55 insertions(+)
> > > 
> > > To what tree should this patch go? My wireless-drivers-next tree doesn't
> > > even have this file.
> > 
> > Right. It will hit the mainline during this merge window through Tony's and
> > arm-soc trees.
> > 
> > Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
> > will take the 3/3 (there is no code dependency between first two and the last one),
> > or we can just wait till arm-soc hits the mainline, so you will have the
> > needed code?
> 
> Yeah I'll pick the dts changes separately after the merge window as
> there is no dependency to the driver changes.

Applying patch 3/3 into omap-for-v4.6/dt thanks.

Tony

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [160113 09:28]:
> * Igor Grinberg <grinberg@compulab.co.il> [160112 22:01]:
> > Hi Kalle Valo,
> > 
> > On 01/07/16 11:02, Kalle Valo wrote:
> > > Uri Mashiach <uri.mashiach@compulab.co.il> writes:
> > > 
> > >> Device tree modifications:
> > >> - Pinmux for SPI0 and WiFi GPIOs.
> > >> - SPI0 node with wlcore as a child node.
> > >>
> > >> Cc: Tony Lindgren <tony@atomide.com>
> > >> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> > >> ---
> > 
> > Uri, please document the dependencies next time. Thanks!
> > 
> > >> v1 -> v2: Replace interrupts and interrupt-parent with interrupts-extended.
> > >> v2 -> v3: Move the pinctrl-0 = <&wifi_pins> to the wlcore node.
> > >> v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification).
> > >>           According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt,
> > >> 	  interrupts-extended should only be used when a device has multiple interrupt parents.
> > >>
> > >>  arch/arm/boot/dts/am335x-cm-t335.dts | 55 ++++++++++++++++++++++++++++++++++++
> > >>  1 file changed, 55 insertions(+)
> > > 
> > > To what tree should this patch go? My wireless-drivers-next tree doesn't
> > > even have this file.
> > 
> > Right. It will hit the mainline during this merge window through Tony's and
> > arm-soc trees.
> > 
> > Do you think it will be sensible if you take 1/3 and 2/3 patches and Tony
> > will take the 3/3 (there is no code dependency between first two and the last one),
> > or we can just wait till arm-soc hits the mainline, so you will have the
> > needed code?
> 
> Yeah I'll pick the dts changes separately after the merge window as
> there is no dependency to the driver changes.

Applying patch 3/3 into omap-for-v4.6/dt thanks.

Tony

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
> 
> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>

Acked-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>

-- 
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

-- 
Regards,
Igor.

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Igor Grinberg]

On 12/30/15 15:35, Uri Mashiach wrote:
> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

-- 
Regards,
Igor.

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> [160112 22:09]:
> 
> 
> On 12/30/15 15:35, Uri Mashiach wrote:
> > Device tree modifications:
> > - Pinmux for SPI0 and WiFi GPIOs.
> > - SPI0 node with wlcore as a child node.
> > 
> > Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> > Signed-off-by: Uri Mashiach <uri.mashiach-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
> 
> Acked-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>

Applying into omap-for-v4.6/dt thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Igor Grinberg <grinberg@compulab.co.il> [160112 22:09]:
> 
> 
> On 12/30/15 15:35, Uri Mashiach wrote:
> > Device tree modifications:
> > - Pinmux for SPI0 and WiFi GPIOs.
> > - SPI0 node with wlcore as a child node.
> > 
> > Cc: Tony Lindgren <tony@atomide.com>
> > Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> 
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Applying into omap-for-v4.6/dt thanks.

Tony

Re: [PATCH v4 3/3] wlcore/wl12xx: spi: add wifi support to cm-t335

[Tony Lindgren]

* Igor Grinberg <grinberg@compulab.co.il> [160112 22:09]:
> 
> 
> On 12/30/15 15:35, Uri Mashiach wrote:
> > Device tree modifications:
> > - Pinmux for SPI0 and WiFi GPIOs.
> > - SPI0 node with wlcore as a child node.
> > 
> > Cc: Tony Lindgren <tony@atomide.com>
> > Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
> 
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Applying into omap-for-v4.6/dt thanks.

Tony

[PATCH] ARM: dts: N950: Add wlan support

[Sebastian Reichel]

Add support for the wl1271 wlan chip. As far as I can see N9 uses the
same chip with the same enable and irq gpio, but they use the mmc
interface instead of the spi interface.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Hi,

I got working Wifi on Nokia N950 with this patch and the following
patches from Uri Mashiach (using 4.4-rc8 as base):

 * wlcore/wl12xx: spi: add power operation function
 * wlcore/wl12xx: spi: add device tree support
 * wlcore/wl12xx: spi: fix oops on firmware load

-- Sebastian
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi | 15 +++++++++++++++
 arch/arm/boot/dts/omap3-n950.dts     | 29 +++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index e9ee1df0e467..655deb99010a 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -31,6 +31,14 @@
 		startup-delay-us = <150>;
 		enable-active-high;
 	};
+
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VWLAN";
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
+		enable-active-high;
+		regulator-boot-off;
+	};
 };
 
 &omap3_pmx_core {
@@ -44,6 +52,13 @@
 			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
 		>;
 	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
+		>;
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 0885b34d5d7d..e5967262f28b 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -17,6 +17,17 @@
 	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
 };
 
+&omap3_pmx_core {
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
+};
+
 &i2c2 {
 	smia_1: camera@10 {
 		compatible = "nokia,smia";
@@ -53,3 +64,21 @@
 		};
 	};
 };
+
+&mcspi4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
-- 
2.6.4