* [PATCH] Kconfig: fix environment variable handling
@ 2016-01-13 10:46 Jan Beulich
2016-01-13 15:50 ` Doug Goldstein
2016-01-15 15:44 ` Ian Campbell
0 siblings, 2 replies; 6+ messages in thread
From: Jan Beulich @ 2016-01-13 10:46 UTC (permalink / raw)
To: xen-devel
Cc: Ian Campbell, Ian Jackson, Keir Fraser, Doug Goldstein,
Tim Deegan
[-- Attachment #1: Type: text/plain, Size: 2878 bytes --]
With xen/Makefile including include/config/auto.conf.cmd, environment
variables checked in the latter must be available at the time of
inclusion of that file, and hence must be populated in xen/Makefile
rather than by passing to or inside xen/tools/kconfig/Makefile.kconfig.
Otherwise incremental re-builds will always be full re-builds, which is
not only annoying but actively problematic when building as non-root
and only running "install-xen" as root.
Also take the opportunity and remove stray $(Q) uses.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -20,6 +20,9 @@ MAKEFLAGS += -rR
EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
+ARCH=$(XEN_TARGET_ARCH)
+SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
+
# Don't break if the build process wasn't called from the top level
# we need XEN_TARGET_ARCH to generate the proper config
include $(XEN_ROOT)/Config.mk
@@ -101,7 +104,7 @@ _clean: delete-unfresh-files
$(MAKE) -f $(BASEDIR)/Rules.mk -C xsm clean
$(MAKE) -f $(BASEDIR)/Rules.mk -C crypto clean
$(MAKE) -f $(BASEDIR)/Rules.mk -C arch/$(TARGET_ARCH) clean
- $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig clean
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) clean
find . \( -name "*.o" -o -name ".*.d" \) -exec rm -f {} \;
rm -f include/asm $(TARGET) $(TARGET).gz $(TARGET).efi $(TARGET)-syms *~ core
rm -f include/asm-*/asm-offsets.h
@@ -236,14 +239,14 @@ kconfig := silentoldconfig oldconfig con
nconfig xconfig gconfig savedefconfig listnewconfig olddefconfig
.PHONY: $(kconfig)
$(kconfig):
- $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) $@
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) $@
include/config/%.conf: include/config/auto.conf.cmd $(KCONFIG_CONFIG)
- $(Q)$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) silentoldconfig
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) silentoldconfig
# Allow people to just run `make` as before and not force them to configure
$(KCONFIG_CONFIG):
- $(Q)$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) defconfig
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) defconfig
# Break the dependency chain for the first run
include/config/auto.conf.cmd: ;
--- a/xen/tools/kconfig/Makefile.kconfig
+++ b/xen/tools/kconfig/Makefile.kconfig
@@ -44,10 +44,6 @@ PHONY += FORCE
FORCE:
-SRCARCH = $(shell echo $(ARCH) | \
- sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
-export SRCARCH
-
# include the original Makefile and Makefile.host from Linux
include $(src)/Makefile
include $(src)/Makefile.host
[-- Attachment #2: Kconfig-env-vars.patch --]
[-- Type: text/plain, Size: 2918 bytes --]
Kconfig: fix environment variable handling
With xen/Makefile including include/config/auto.conf.cmd, environment
variables checked in the latter must be available at the time of
inclusion of that file, and hence must be populated in xen/Makefile
rather than by passing to or inside xen/tools/kconfig/Makefile.kconfig.
Otherwise incremental re-builds will always be full re-builds, which is
not only annoying but actively problematic when building as non-root
and only running "install-xen" as root.
Also take the opportunity and remove stray $(Q) uses.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -20,6 +20,9 @@ MAKEFLAGS += -rR
EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
+ARCH=$(XEN_TARGET_ARCH)
+SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
+
# Don't break if the build process wasn't called from the top level
# we need XEN_TARGET_ARCH to generate the proper config
include $(XEN_ROOT)/Config.mk
@@ -101,7 +104,7 @@ _clean: delete-unfresh-files
$(MAKE) -f $(BASEDIR)/Rules.mk -C xsm clean
$(MAKE) -f $(BASEDIR)/Rules.mk -C crypto clean
$(MAKE) -f $(BASEDIR)/Rules.mk -C arch/$(TARGET_ARCH) clean
- $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig clean
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) clean
find . \( -name "*.o" -o -name ".*.d" \) -exec rm -f {} \;
rm -f include/asm $(TARGET) $(TARGET).gz $(TARGET).efi $(TARGET)-syms *~ core
rm -f include/asm-*/asm-offsets.h
@@ -236,14 +239,14 @@ kconfig := silentoldconfig oldconfig con
nconfig xconfig gconfig savedefconfig listnewconfig olddefconfig
.PHONY: $(kconfig)
$(kconfig):
- $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) $@
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) $@
include/config/%.conf: include/config/auto.conf.cmd $(KCONFIG_CONFIG)
- $(Q)$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) silentoldconfig
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) silentoldconfig
# Allow people to just run `make` as before and not force them to configure
$(KCONFIG_CONFIG):
- $(Q)$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) defconfig
+ $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) defconfig
# Break the dependency chain for the first run
include/config/auto.conf.cmd: ;
--- a/xen/tools/kconfig/Makefile.kconfig
+++ b/xen/tools/kconfig/Makefile.kconfig
@@ -44,10 +44,6 @@ PHONY += FORCE
FORCE:
-SRCARCH = $(shell echo $(ARCH) | \
- sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
-export SRCARCH
-
# include the original Makefile and Makefile.host from Linux
include $(src)/Makefile
include $(src)/Makefile.host
[-- Attachment #3: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] Kconfig: fix environment variable handling
2016-01-13 10:46 [PATCH] Kconfig: fix environment variable handling Jan Beulich
@ 2016-01-13 15:50 ` Doug Goldstein
2016-01-15 15:44 ` Ian Campbell
1 sibling, 0 replies; 6+ messages in thread
From: Doug Goldstein @ 2016-01-13 15:50 UTC (permalink / raw)
To: Jan Beulich, xen-devel; +Cc: Ian Campbell, Keir Fraser, Ian Jackson, Tim Deegan
[-- Attachment #1.1: Type: text/plain, Size: 3128 bytes --]
On 1/13/16 4:46 AM, Jan Beulich wrote:
> With xen/Makefile including include/config/auto.conf.cmd, environment
> variables checked in the latter must be available at the time of
> inclusion of that file, and hence must be populated in xen/Makefile
> rather than by passing to or inside xen/tools/kconfig/Makefile.kconfig.
> Otherwise incremental re-builds will always be full re-builds, which is
> not only annoying but actively problematic when building as non-root
> and only running "install-xen" as root.
>
> Also take the opportunity and remove stray $(Q) uses.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>
> --- a/xen/Makefile
> +++ b/xen/Makefile
> @@ -20,6 +20,9 @@ MAKEFLAGS += -rR
>
> EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
>
> +ARCH=$(XEN_TARGET_ARCH)
> +SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
> +
> # Don't break if the build process wasn't called from the top level
> # we need XEN_TARGET_ARCH to generate the proper config
> include $(XEN_ROOT)/Config.mk
> @@ -101,7 +104,7 @@ _clean: delete-unfresh-files
> $(MAKE) -f $(BASEDIR)/Rules.mk -C xsm clean
> $(MAKE) -f $(BASEDIR)/Rules.mk -C crypto clean
> $(MAKE) -f $(BASEDIR)/Rules.mk -C arch/$(TARGET_ARCH) clean
> - $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig clean
> + $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) clean
> find . \( -name "*.o" -o -name ".*.d" \) -exec rm -f {} \;
> rm -f include/asm $(TARGET) $(TARGET).gz $(TARGET).efi $(TARGET)-syms *~ core
> rm -f include/asm-*/asm-offsets.h
> @@ -236,14 +239,14 @@ kconfig := silentoldconfig oldconfig con
> nconfig xconfig gconfig savedefconfig listnewconfig olddefconfig
> .PHONY: $(kconfig)
> $(kconfig):
> - $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) $@
> + $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) $@
>
> include/config/%.conf: include/config/auto.conf.cmd $(KCONFIG_CONFIG)
> - $(Q)$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) silentoldconfig
> + $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) silentoldconfig
>
> # Allow people to just run `make` as before and not force them to configure
> $(KCONFIG_CONFIG):
> - $(Q)$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(XEN_TARGET_ARCH) defconfig
> + $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) defconfig
>
> # Break the dependency chain for the first run
> include/config/auto.conf.cmd: ;
> --- a/xen/tools/kconfig/Makefile.kconfig
> +++ b/xen/tools/kconfig/Makefile.kconfig
> @@ -44,10 +44,6 @@ PHONY += FORCE
>
> FORCE:
>
> -SRCARCH = $(shell echo $(ARCH) | \
> - sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
> -export SRCARCH
> -
> # include the original Makefile and Makefile.host from Linux
> include $(src)/Makefile
> include $(src)/Makefile.host
>
>
>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
--
Doug Goldstein
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 959 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] Kconfig: fix environment variable handling
2016-01-13 10:46 [PATCH] Kconfig: fix environment variable handling Jan Beulich
2016-01-13 15:50 ` Doug Goldstein
@ 2016-01-15 15:44 ` Ian Campbell
2016-01-15 15:54 ` Jan Beulich
1 sibling, 1 reply; 6+ messages in thread
From: Ian Campbell @ 2016-01-15 15:44 UTC (permalink / raw)
To: Jan Beulich, xen-devel
Cc: Ian Jackson, Keir Fraser, Doug Goldstein, Tim Deegan
On Wed, 2016-01-13 at 03:46 -0700, Jan Beulich wrote:
> With xen/Makefile including include/config/auto.conf.cmd, environment
> variables checked in the latter must be available at the time of
> inclusion of that file, and hence must be populated in xen/Makefile
> rather than by passing to or inside xen/tools/kconfig/Makefile.kconfig.
> Otherwise incremental re-builds will always be full re-builds, which is
> not only annoying but actively problematic when building as non-root
> and only running "install-xen" as root.
>
> Also take the opportunity and remove stray $(Q) uses.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>
> --- a/xen/Makefile
> +++ b/xen/Makefile
> @@ -20,6 +20,9 @@ MAKEFLAGS += -rR
>
> EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
>
> +ARCH=$(XEN_TARGET_ARCH)
> +SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
Why not just use XEN_TARGET_ARCH and TARGET_ARCH as defined in
xen/Rules.mk, at the point where recursing into kconfig/Makefile.kconfig?
Otherwise wouldn't we risk SRCARCH and TARGET_ARCH getting out of sync?
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] Kconfig: fix environment variable handling
2016-01-15 15:44 ` Ian Campbell
@ 2016-01-15 15:54 ` Jan Beulich
2016-01-15 16:01 ` Ian Campbell
0 siblings, 1 reply; 6+ messages in thread
From: Jan Beulich @ 2016-01-15 15:54 UTC (permalink / raw)
To: Ian Campbell
Cc: Ian Jackson, Tim Deegan, Keir Fraser, Doug Goldstein, xen-devel
>>> On 15.01.16 at 16:44, <ian.campbell@citrix.com> wrote:
> On Wed, 2016-01-13 at 03:46 -0700, Jan Beulich wrote:
>> With xen/Makefile including include/config/auto.conf.cmd, environment
>> variables checked in the latter must be available at the time of
>> inclusion of that file, and hence must be populated in xen/Makefile
>> rather than by passing to or inside xen/tools/kconfig/Makefile.kconfig.
>> Otherwise incremental re-builds will always be full re-builds, which is
>> not only annoying but actively problematic when building as non-root
>> and only running "install-xen" as root.
>>
>> Also take the opportunity and remove stray $(Q) uses.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>
>> --- a/xen/Makefile
>> +++ b/xen/Makefile
>> @@ -20,6 +20,9 @@ MAKEFLAGS += -rR
>>
>> EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
>>
>> +ARCH=$(XEN_TARGET_ARCH)
>> +SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g')
>
> Why not just use XEN_TARGET_ARCH and TARGET_ARCH as defined in
> xen/Rules.mk, at the point where recursing into kconfig/Makefile.kconfig?
xen/Makefile doesn't include xen/Rules.mk afaics. And the recursion
into kconfig/Makefile.kconfig doesn't use it either (and probably
shouldn't, as we want to keep the two environments distinct, in
order to not risk collisions).
> Otherwise wouldn't we risk SRCARCH and TARGET_ARCH getting out of sync?
That would be bad indeed, but no worse than before this patch
(which just moves it). I vaguely recall even maybe having
commented on that duplication in the context of the Kconfig series.
Jan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] Kconfig: fix environment variable handling
2016-01-15 15:54 ` Jan Beulich
@ 2016-01-15 16:01 ` Ian Campbell
2016-01-15 16:17 ` Jan Beulich
0 siblings, 1 reply; 6+ messages in thread
From: Ian Campbell @ 2016-01-15 16:01 UTC (permalink / raw)
To: Jan Beulich
Cc: Ian Jackson, Tim Deegan, Keir Fraser, Doug Goldstein, xen-devel
On Fri, 2016-01-15 at 08:54 -0700, Jan Beulich wrote:
> > > > On 15.01.16 at 16:44, <ian.campbell@citrix.com> wrote:
> > On Wed, 2016-01-13 at 03:46 -0700, Jan Beulich wrote:
> > > With xen/Makefile including include/config/auto.conf.cmd, environment
> > > variables checked in the latter must be available at the time of
> > > inclusion of that file, and hence must be populated in xen/Makefile
> > > rather than by passing to or inside
> > > xen/tools/kconfig/Makefile.kconfig.
> > > Otherwise incremental re-builds will always be full re-builds, which
> > > is
> > > not only annoying but actively problematic when building as non-root
> > > and only running "install-xen" as root.
> > >
> > > Also take the opportunity and remove stray $(Q) uses.
> > >
> > > Signed-off-by: Jan Beulich <jbeulich@suse.com>
> > >
> > > --- a/xen/Makefile
> > > +++ b/xen/Makefile
> > > @@ -20,6 +20,9 @@ MAKEFLAGS += -rR
> > >
> > > EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
> > >
> > > +ARCH=$(XEN_TARGET_ARCH)
> > > +SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e
> > > s'/arm\(32\|64\)/arm/g')
> >
> > Why not just use XEN_TARGET_ARCH and TARGET_ARCH as defined in
> > xen/Rules.mk, at the point where recursing into
> > kconfig/Makefile.kconfig?
>
> xen/Makefile doesn't include xen/Rules.mk afaics. And the recursion
> into kconfig/Makefile.kconfig doesn't use it either (and probably
> shouldn't, as we want to keep the two environments distinct, in
> order to not risk collisions).
Hrm, true. In which case:
Acked-by: Ian Campbell <ian.campbell@citrix.com>
> > Otherwise wouldn't we risk SRCARCH and TARGET_ARCH getting out of sync?
>
> That would be bad indeed, but no worse than before this patch
> (which just moves it). I vaguely recall even maybe having
> commented on that duplication in the context of the Kconfig series.
Perhaps the answer is another file alongside Rules.mk which is more
constrained and can therefore be included from more places (including
xen/Makefile)?
Ian.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] Kconfig: fix environment variable handling
2016-01-15 16:01 ` Ian Campbell
@ 2016-01-15 16:17 ` Jan Beulich
0 siblings, 0 replies; 6+ messages in thread
From: Jan Beulich @ 2016-01-15 16:17 UTC (permalink / raw)
To: Ian Campbell
Cc: Ian Jackson, Tim Deegan, Keir Fraser, Doug Goldstein, xen-devel
>>> On 15.01.16 at 17:01, <ian.campbell@citrix.com> wrote:
> On Fri, 2016-01-15 at 08:54 -0700, Jan Beulich wrote:
>> > > > On 15.01.16 at 16:44, <ian.campbell@citrix.com> wrote:
>> > On Wed, 2016-01-13 at 03:46 -0700, Jan Beulich wrote:
>> > > With xen/Makefile including include/config/auto.conf.cmd, environment
>> > > variables checked in the latter must be available at the time of
>> > > inclusion of that file, and hence must be populated in xen/Makefile
>> > > rather than by passing to or inside
>> > > xen/tools/kconfig/Makefile.kconfig.
>> > > Otherwise incremental re-builds will always be full re-builds, which
>> > > is
>> > > not only annoying but actively problematic when building as non-root
>> > > and only running "install-xen" as root.
>> > >
>> > > Also take the opportunity and remove stray $(Q) uses.
>> > >
>> > > Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> > >
>> > > --- a/xen/Makefile
>> > > +++ b/xen/Makefile
>> > > @@ -20,6 +20,9 @@ MAKEFLAGS += -rR
>> > >
>> > > EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi
>> > >
>> > > +ARCH=$(XEN_TARGET_ARCH)
>> > > +SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e
>> > > s'/arm\(32\|64\)/arm/g')
>> >
>> > Why not just use XEN_TARGET_ARCH and TARGET_ARCH as defined in
>> > xen/Rules.mk, at the point where recursing into
>> > kconfig/Makefile.kconfig?
>>
>> xen/Makefile doesn't include xen/Rules.mk afaics. And the recursion
>> into kconfig/Makefile.kconfig doesn't use it either (and probably
>> shouldn't, as we want to keep the two environments distinct, in
>> order to not risk collisions).
>
> Hrm, true. In which case:
>
> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Thanks.
>> > Otherwise wouldn't we risk SRCARCH and TARGET_ARCH getting out of sync?
>>
>> That would be bad indeed, but no worse than before this patch
>> (which just moves it). I vaguely recall even maybe having
>> commented on that duplication in the context of the Kconfig series.
>
> Perhaps the answer is another file alongside Rules.mk which is more
> constrained and can therefore be included from more places (including
> xen/Makefile)?
Indeed I was thinking along those same lines.
Jan
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-01-15 16:17 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-13 10:46 [PATCH] Kconfig: fix environment variable handling Jan Beulich
2016-01-13 15:50 ` Doug Goldstein
2016-01-15 15:44 ` Ian Campbell
2016-01-15 15:54 ` Jan Beulich
2016-01-15 16:01 ` Ian Campbell
2016-01-15 16:17 ` Jan Beulich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.