From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Mark Brown <broonie@kernel.org>
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linus.walleij@linaro.org, gnurou@gmail.com, lee.jones@linaro.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
lgirdwood@gmail.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
rtc-linux@googlegroups.com, swarren@nvidia.com,
treding@nvidia.com
Subject: Re: [PATCH V2 5/6] rtc: max77xxx: add RTC driver for Maxim MAX77xxx series RTC IP
Date: Mon, 18 Jan 2016 13:23:26 +0900 [thread overview]
Message-ID: <569C68BE.3030804@samsung.com> (raw)
In-Reply-To: <20160114142048.GS6588@sirena.org.uk>
On 14.01.2016 23:20, Mark Brown wrote:
> On Thu, Jan 14, 2016 at 10:20:56AM +0900, Krzysztof Kozlowski wrote:
>
>> 2. It has different register address.
>> We need a register-layout/configuration structure. The logic is the
>> same except few differences (e.g. presence of MAX77802_RTC_AE1).
>
> Depending on what the differences are either just some variables in the
> driver data that get set on probe with the different registers (if it's
> just the register) or using regmap_field (if things get shifted as well,
> or if it happens to make more sense) should work.
Thanks for the hints!
The addresses for registers are indeed shifted. It is non-linear because
apart of different offset at beginning, a new field appears. Anyway it
would be good for me (or other person doing this work) to get more
knowledge of what regmap API provides.
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Mark Brown <broonie@kernel.org>
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linus.walleij@linaro.org, gnurou@gmail.com, lee.jones@linaro.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
lgirdwood@gmail.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
rtc-linux@googlegroups.com, swarren@nvidia.com,
treding@nvidia.com
Subject: [rtc-linux] Re: [PATCH V2 5/6] rtc: max77xxx: add RTC driver for Maxim MAX77xxx series RTC IP
Date: Mon, 18 Jan 2016 13:23:26 +0900 [thread overview]
Message-ID: <569C68BE.3030804@samsung.com> (raw)
In-Reply-To: <20160114142048.GS6588@sirena.org.uk>
On 14.01.2016 23:20, Mark Brown wrote:
> On Thu, Jan 14, 2016 at 10:20:56AM +0900, Krzysztof Kozlowski wrote:
>
>> 2. It has different register address.
>> We need a register-layout/configuration structure. The logic is the
>> same except few differences (e.g. presence of MAX77802_RTC_AE1).
>
> Depending on what the differences are either just some variables in the
> driver data that get set on probe with the different registers (if it's
> just the register) or using regmap_field (if things get shifted as well,
> or if it happens to make more sense) should work.
Thanks for the hints!
The addresses for registers are indeed shifted. It is non-linear because
apart of different offset at beginning, a new field appears. Anyway it
would be good for me (or other person doing this work) to get more
knowledge of what regmap API provides.
Best regards,
Krzysztof
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2016-01-18 4:23 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 9:17 [PATCH V2 0/6] Add support for MAXIM MAX77620/MAX20024 PMIC Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
2016-01-12 9:17 ` [PATCH V2 1/6] DT: mfd: add device-tree binding doc fro PMIC max77620/max20024 Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
[not found] ` <1452590273-16421-2-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-13 2:07 ` Rob Herring
2016-01-13 2:07 ` Rob Herring
2016-01-13 2:07 ` [rtc-linux] " Rob Herring
2016-01-12 9:17 ` [PATCH V2 2/6] mfd: max77620: add core driver for MAX77620/MAX20024 Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
2016-01-13 0:47 ` Krzysztof Kozlowski
2016-01-13 0:47 ` [rtc-linux] " Krzysztof Kozlowski
2016-01-13 9:00 ` Laxman Dewangan
2016-01-13 9:00 ` Laxman Dewangan
2016-01-13 9:00 ` [rtc-linux] " Laxman Dewangan
2016-01-13 10:11 ` Alexandre Belloni
2016-01-13 10:11 ` [rtc-linux] " Alexandre Belloni
2016-01-12 9:17 ` [PATCH V2 3/6] pinctrl: max77620: add pincontrol " Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
2016-01-12 9:17 ` [PATCH V2 4/6] gpio: max77620: add gpio " Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
2016-01-12 9:17 ` [PATCH V2 5/6] rtc: max77xxx: add RTC driver for Maxim MAX77xxx series RTC IP Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
2016-01-13 0:06 ` Krzysztof Kozlowski
2016-01-13 0:06 ` [rtc-linux] " Krzysztof Kozlowski
2016-01-13 4:07 ` Laxman Dewangan
2016-01-13 4:07 ` Laxman Dewangan
2016-01-13 4:07 ` [rtc-linux] " Laxman Dewangan
2016-01-13 4:28 ` Krzysztof Kozlowski
2016-01-13 4:28 ` [rtc-linux] " Krzysztof Kozlowski
2016-01-13 4:25 ` Laxman Dewangan
2016-01-13 4:25 ` Laxman Dewangan
2016-01-13 4:25 ` [rtc-linux] " Laxman Dewangan
[not found] ` <5695D1AF.9000806-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-13 14:59 ` Laxman Dewangan
2016-01-13 14:59 ` Laxman Dewangan
2016-01-13 14:59 ` [rtc-linux] " Laxman Dewangan
2016-01-14 0:50 ` Krzysztof Kozlowski
2016-01-14 0:50 ` [rtc-linux] " Krzysztof Kozlowski
[not found] ` <5696F0C4.1060904-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-01-14 1:20 ` Krzysztof Kozlowski
2016-01-14 1:20 ` Krzysztof Kozlowski
2016-01-14 1:20 ` [rtc-linux] " Krzysztof Kozlowski
2016-01-14 11:50 ` Laxman Dewangan
2016-01-14 11:50 ` Laxman Dewangan
2016-01-14 11:50 ` [rtc-linux] " Laxman Dewangan
2016-01-15 1:50 ` Javier Martinez Canillas
2016-01-15 1:50 ` [rtc-linux] " Javier Martinez Canillas
2016-01-18 4:27 ` Krzysztof Kozlowski
2016-01-18 4:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-01-18 12:01 ` Laxman Dewangan
2016-01-18 12:01 ` Laxman Dewangan
2016-01-18 12:01 ` [rtc-linux] " Laxman Dewangan
2016-01-18 12:52 ` Javier Martinez Canillas
2016-01-18 12:52 ` [rtc-linux] " Javier Martinez Canillas
2016-01-14 14:20 ` Mark Brown
2016-01-14 14:20 ` [rtc-linux] " Mark Brown
2016-01-18 4:23 ` Krzysztof Kozlowski [this message]
2016-01-18 4:23 ` Krzysztof Kozlowski
2016-01-12 9:17 ` [PATCH V2 6/6] regulator: max77620: add regulator driver for max77620/max20024 Laxman Dewangan
2016-01-12 9:17 ` Laxman Dewangan
2016-01-12 9:17 ` [rtc-linux] " Laxman Dewangan
2016-01-13 1:28 ` Krzysztof Kozlowski
2016-01-13 1:28 ` [rtc-linux] " Krzysztof Kozlowski
2016-01-13 11:39 ` Laxman Dewangan
2016-01-13 11:39 ` Laxman Dewangan
2016-01-13 11:39 ` [rtc-linux] " Laxman Dewangan
2016-01-13 11:57 ` Mark Brown
2016-01-13 11:57 ` [rtc-linux] " Mark Brown
2016-01-13 12:05 ` Laxman Dewangan
2016-01-13 12:05 ` Laxman Dewangan
2016-01-13 12:05 ` [rtc-linux] " Laxman Dewangan
2016-01-13 12:31 ` Mark Brown
2016-01-13 12:31 ` [rtc-linux] " Mark Brown
2016-01-13 12:37 ` Laxman Dewangan
2016-01-13 12:37 ` Laxman Dewangan
2016-01-13 12:37 ` [rtc-linux] " Laxman Dewangan
2016-01-13 13:09 ` Mark Brown
2016-01-13 13:09 ` [rtc-linux] " Mark Brown
2016-01-13 13:11 ` Laxman Dewangan
2016-01-13 13:11 ` Laxman Dewangan
2016-01-13 13:11 ` [rtc-linux] " Laxman Dewangan
[not found] ` <56964CEF.3030900-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-13 14:20 ` Mark Brown
2016-01-13 14:20 ` Mark Brown
2016-01-13 14:20 ` [rtc-linux] " Mark Brown
2016-01-13 14:42 ` Laxman Dewangan
2016-01-13 14:42 ` Laxman Dewangan
2016-01-13 14:42 ` [rtc-linux] " Laxman Dewangan
[not found] ` <56966242.4080601-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-13 15:51 ` Mark Brown
2016-01-13 15:51 ` Mark Brown
2016-01-13 15:51 ` [rtc-linux] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569C68BE.3030804@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gnurou@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=ldewangan@nvidia.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=swarren@nvidia.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.