Re: [PATCH V2 1/4] mfd: f81504-core: Add Fintek F81504/508/512 PCIE-to-UART/GPIO core support

[Peter Hung <hpeter@gmail.com>]

Hi Alan,

One Thousand Gnomes 於 2016/1/28 下午 06:04 寫道:
>> +          Please bulit-in kernel if you need early console support.
> This driver needs to be built into the kernel to use early console
> support.
>

ok

>> +	switch (dev->device) {
>> +	case FINTEK_F81504: /* 4 ports */
>> +		/* F81504 max 2 sets of GPIO, others are max 6 sets*/
>> +		gpio_en &= 0x03;
>> +	case FINTEK_F81508: /* 8 ports */
>> +		max_port = dev->device & 0xff;
>
> If that is meant to fall through from F81504 into F81508 it's worth
> commenting, otherwise someone reviewing the code can't always be sure it
> was intentional.

ok, I'll add comments to describe this.

>> +	/* Get the UART IO address dispatch from the BIOS */
>> +	pci_read_config_dword(dev, 0x24, &bar_data[0]);
>> +	pci_read_config_dword(dev, 0x20, &bar_data[1]);
>> +	pci_read_config_dword(dev, 0x1c, &bar_data[2]);
>
> Take these from the pci device itself. On some non PC platforms the
> values in the pci bar may be remapped by bridges and not give you the
> true answer.
>
> 	pci_resource_start(dev, barnumber)
>

Thanks for point this out, I'll rewrite here with pci_resource_start().
-- 
With Best Regards,
Peter Hung