Re: [PATCH] help guest boot up on AArch64 host with GICv2

[Marc Zyngier <marc.zyngier@arm.com>]

On 29/01/16 18:29, Chris Metcalf wrote:
> On 01/29/2016 12:54 PM, Marc Zyngier wrote:
>> By the look of it, you're trying to use a GICv3 firmware, and pass a
>> GICv2 DT to the kernel. Do not do that. Either you use a GICv2 firmware
>> (having spoken to the ATF guys, there is a GICv2 driver in there that
>> should work for your case) and pass a GICv2 DT, or you go GICv3 all the way.
>>
>> A mix of the two things is completely unsupported on the model, and
>> solidly places you in the UNPREDICTABLE category when running that on
>> actual HW...
> 
> Once we upgrade to ATF 1.2 we will remove all of our GICv2
> stuff and see if everything works smoothly; till then, at least, we
> seem to have a workaround in place for development that will
> let us keep moving forward.
> 
>  From the ATF docs it does seem that using a v3 GIC in v2
> compatibility mode should be supported, but it's not pressing
> from our side to drill any deeper to try to see why it's not
> actually working correctly for us (though I'd be happy to try
> any further testing in this configuration if that's helpful).

That's what I've been told as well - the GICv2 code in ATF 1.2 should do
the trick out of the box.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...