Re: bonding (IEEE 802.3ad) not working with qemu/virtio

[Nikolay Aleksandrov <nikolay@cumulusnetworks.com>]

On 01/29/2016 10:45 PM, Jay Vosburgh wrote:
> Nikolay Aleksandrov <nikolay@cumulusnetworks.com> wrote:
> 
>> On 01/25/2016 05:24 PM, Bjørnar Ness wrote:
>>> As subject says, 802.3ad bonding is not working with virtio network model.
>>>
>>> The only errors I see is:
>>>
>>> No 802.3ad response from the link partner for any adapters in the bond.
>>>
>>> Dumping the network traffic shows that no LACP packets are sent from the
>>> host running with virtio driver, changing to for example e1000 solves
>>> this problem
>>> with no configuration changes.
>>>
>>> Is this a known problem?
>>>
>> [Including bonding maintainers for comments]
>>
>> Hi,
>> Here's a workaround patch for virtio_net devices that "cheats" the
>> duplex test (which is the actual problem). I've tested this locally
>> and it works for me.
>> I'd let the others comment on the implementation, there're other signs
>> that can be used to distinguish a virtio_net device so I'm open to suggestions.
>> Also feedback if this is at all acceptable would be appreciated.
> 
> 	Should virtio instead provide an arbitrary speed and full duplex
> to ethtool, as veth does?
> 
> 	Creating a magic whitelist of devices deep inside the 802.3ad
> implementation seems less desirable.
> 
TBH, I absolutely agree. In fact here's what we've been doing:
add set_settings which allows the user to set any speed/duplex
and get_settings of course to retrieve that. This is also useful
for testing other stuff that requires speed and duplex, not only
for the bonding case.

I'll add the virtio_net maintainers to the discussion, see if it's
okay with everyone and I'll move to send patches once net-next opens up.

Thanks!


> 	-J
> 	
> ---
> 	-Jay Vosburgh, jay.vosburgh@canonical.com
>