[PATCH] regulator: max77802: Fix DT binding document reference

[PATCH] regulator: max77802: Fix DT binding document reference

[Javier Martinez Canillas]

The DT binding doc references the max77802 clocks header file which makes
no sense since of course it doesn't contain data related to the regulators.

It's a copy and paste error, so add a reference to the correct header file.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 Documentation/devicetree/bindings/regulator/max77802.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
index 09d796ed48be..879e98d3b9aa 100644
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -60,7 +60,7 @@ The possible values for "regulator-initial-mode" and "regulator-mode" are:
 	1: Normal regulator voltage output mode.
 	3: Low Power which reduces the quiescent current down to only 1uA
 
-The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
 header and can be included by device tree source files.
 
 The standard "regulator-mode" property can only be used for regulators that
-- 
2.5.0

Re: [PATCH] regulator: max77802: Fix DT binding document reference

[Krzysztof Kozlowski]

W dniu 30.01.2016 o 01:09, Javier Martinez Canillas pisze:
> The DT binding doc references the max77802 clocks header file which makes
> no sense since of course it doesn't contain data related to the regulators.
> 
> It's a copy and paste error, so add a reference to the correct header file.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 
> ---
> 
>  Documentation/devicetree/bindings/regulator/max77802.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [PATCH] regulator: max77802: Fix DT binding document reference

[Rob Herring]

On Fri, Jan 29, 2016 at 01:09:00PM -0300, Javier Martinez Canillas wrote:
> The DT binding doc references the max77802 clocks header file which makes
> no sense since of course it doesn't contain data related to the regulators.
> 
> It's a copy and paste error, so add a reference to the correct header file.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

Acked-by: Rob Herring <robh@kernel.org>

Applied "regulator: max77802: Fix DT binding document reference" to the regulator tree

[Mark Brown]

The patch

   regulator: max77802: Fix DT binding document reference

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 917e50d6941ed8b2bbde0a066f15f0d19e8f9409 Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javier@osg.samsung.com>
Date: Fri, 29 Jan 2016 13:09:00 -0300
Subject: [PATCH] regulator: max77802: Fix DT binding document reference

The DT binding doc references the max77802 clocks header file which makes
no sense since of course it doesn't contain data related to the regulators.

It's a copy and paste error, so add a reference to the correct header file.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/regulator/max77802.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
index 09d796ed48be..879e98d3b9aa 100644
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -60,7 +60,7 @@ The possible values for "regulator-initial-mode" and "regulator-mode" are:
 	1: Normal regulator voltage output mode.
 	3: Low Power which reduces the quiescent current down to only 1uA
 
-The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
 header and can be included by device tree source files.
 
 The standard "regulator-mode" property can only be used for regulators that
-- 
2.7.0.rc3