[linux-sunxi] [PATCH 10/11] arm64: dts: add Allwinner A64 SoC .dtsi

[andre.przywara@arm.com (André Przywara)]

On 01/02/16 19:05, Karsten Merker wrote:
> Hello,
> 
> a few tiny spelling nitpicks in case you should do a V2:

Definitely! ;-)

> 
> On Mon, Feb 01, 2016 at 05:39:29PM +0000, Andre Przywara wrote:
> 
>> The Allwinner A64 SoC is low-cost SoC with 4 ARM Cortex-A53 cores
> 
> s/is low-cost SoC/is a low-cost SoC/
>                          
>> and the typical tablet / TV box peripherals.
>> The Soc is based on the (32-bit) Allwinner H3 chip, sharing most of
> 
> s/Soc/SoC/

Thanks for catching those!

>> the peripherals and the memory map.
>> Although the cores are proper 64-bit ones, the whole SoC is actually
>> limited to 4GB (including all the supported DRAM), so we use 32-bit
>> address and size cells. This has the nice feature of us being able to
>> reuse the DT for 32-bit kernels as well.
>> This .dtsi lists the hardware that we support so far.
>>
>> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
>> ---
>>  Documentation/devicetree/bindings/arm/sunxi.txt   |   1 +
>>  Documentation/devicetree/bindings/clock/sunxi.txt |   1 +
>>  arch/arm64/boot/dts/allwinner/a64.dtsi            | 583 ++++++++++++++++++++++
>>  3 files changed, 585 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/allwinner/a64.dtsi
>>
>> diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
>> index 980e065..4a83853 100644
>> --- a/Documentation/devicetree/bindings/arm/sunxi.txt
>> +++ b/Documentation/devicetree/bindings/arm/sunxi.txt
>> @@ -14,6 +14,7 @@ using one of the following compatible strings:
>>    allwinner,sun8i-a83t
>>    allwinner,sun8i-h3
>>    allwinner,sun9i-a80
>> +  allwinner,a64
> 
> Please see my followup to patch No. 5 in this series.
> s/allwinner,a64/allwinner,sun50i-a64/ ?

As explained in the first email, rather not, especially if it is about
DT namings.

>>  
>>  For Allwinner SoCs without any specific needs the generic fallback value of:
>>    allwinner,sunxi
>> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
>> index e59f57b..44b0c6c 100644
>> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
>> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
>> @@ -77,6 +77,7 @@ Required properties:
>>  	"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
>>  	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
>>  	"allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
>> +	"allwinner,a64-bus-gates-clk" - for the A64 multi-parent bus gates clock
> 
> see above
> 
>>  
>>  Required properties for all clocks:
>>  - reg : shall be the control register address for the clock.
>> diff --git a/arch/arm64/boot/dts/allwinner/a64.dtsi b/arch/arm64/boot/dts/allwinner/a64.dtsi
> 
> see above - the dts and dtsi names for the other Allwinner SoCs contain
> the SoC family. 

... mostly because the arm DTs are all in one directory, and just some
a<xx>.dtsi is then indeed not very specific. But arm64 fortunately has
per-vendor directories, so things are pretty well separated. If a64.dtsi
is deemed too short, I could call it allwinner_a64.dtsi or maybe
sunxi_a64.dtsi, but I'd rather avoid sun50i-a64.dtsi.
Also looking at the other arm64 DTs I see a lot of short names, just
using the (marketing) chip name as the stub.

Similar reasoning for the other occurrences below.

Cheers,
Andre.

>> new file mode 100644
>> index 0000000..8dce10f
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/allwinner/a64.dtsi
>> @@ -0,0 +1,583 @@
>> +/*
>> + * Copyright (C) 2016 ARM Ltd.
>> + * based on the Allwinner H3 dtsi:
>> + *    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> +	compatible = "allwinner,a64", "allwinner,sunxi";
> 
> see above
> 
>> +	interrupt-parent = <&gic>;
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +		serial1 = &uart1;
>> +		serial2 = &uart2;
>> +		serial3 = &uart3;
>> +		serial4 = &uart4;
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu at 0 {
>> +			compatible = "arm,cortex-a53", "arm,armv8";
>> +			device_type = "cpu";
>> +			reg = <0>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu at 1 {
>> +			compatible = "arm,cortex-a53", "arm,armv8";
>> +			device_type = "cpu";
>> +			reg = <1>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu at 2 {
>> +			compatible = "arm,cortex-a53", "arm,armv8";
>> +			device_type = "cpu";
>> +			reg = <2>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu at 3 {
>> +			compatible = "arm,cortex-a53", "arm,armv8";
>> +			device_type = "cpu";
>> +			reg = <3>;
>> +			enable-method = "psci";
>> +		};
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-0.2", "arm,psci";
>> +		method = "smc";
>> +		cpu_suspend = <0xc4000001>;
>> +		cpu_off = <0x84000002>;
>> +		cpu_on = <0xc4000003>;
>> +	};
>> +
>> +	memory {
>> +		device_type = "memory";
>> +		reg = <0x40000000 0>;
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 13
>> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 14
>> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 11
>> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 10
>> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +	};
>> +
>> +	clocks {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		osc24M: osc24M_clk {
>> +			#clock-cells = <0>;
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <24000000>;
>> +			clock-output-names = "osc24M";
>> +		};
>> +
>> +		osc32k: osc32k_clk {
>> +			#clock-cells = <0>;
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32768>;
>> +			clock-output-names = "osc32k";
>> +		};
>> +
>> +		pll1: clk at 01c20000 {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun8i-a23-pll1-clk";
>> +			reg = <0x01c20000 0x4>;
>> +			clocks = <&osc24M>;
>> +			clock-output-names = "pll1";
>> +		};
>> +
>> +		pll6: clk at 01c20028 {
>> +			#clock-cells = <1>;
>> +			compatible = "allwinner,sun6i-a31-pll6-clk";
>> +			reg = <0x01c20028 0x4>;
>> +			clocks = <&osc24M>;
>> +			clock-output-names = "pll6", "pll6x2";
>> +		};
>> +
>> +		pll6d2: pll6d2_clk {
>> +			#clock-cells = <0>;
>> +			compatible = "fixed-factor-clock";
>> +			clock-div = <2>;
>> +			clock-mult = <1>;
>> +			clocks = <&pll6 0>;
>> +			clock-output-names = "pll6d2";
>> +		};
>> +
>> +		/* dummy clock until pll6 can be reused */
>> +		pll8: pll8_clk {
>> +			#clock-cells = <0>;
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1>;
>> +			clock-output-names = "pll8";
>> +		};
>> +
>> +		cpu: cpu_clk at 01c20050 {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun4i-a10-cpu-clk";
>> +			reg = <0x01c20050 0x4>;
>> +			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
>> +			clock-output-names = "cpu";
>> +			critical-clocks = <0>;
>> +		};
>> +
>> +		axi: axi_clk at 01c20050 {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun4i-a10-axi-clk";
>> +			reg = <0x01c20050 0x4>;
>> +			clocks = <&cpu>;
>> +			clock-output-names = "axi";
>> +		};
>> +
>> +		ahb1: ahb1_clk at 01c20054 {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun6i-a31-ahb1-clk";
>> +			reg = <0x01c20054 0x4>;
>> +			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
>> +			clock-output-names = "ahb1";
>> +		};
>> +
>> +		ahb2: ahb2_clk at 01c2005c {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun8i-h3-ahb2-clk";
>> +			reg = <0x01c2005c 0x4>;
>> +			clocks = <&ahb1>, <&pll6d2>;
>> +			clock-output-names = "ahb2";
>> +		};
>> +
>> +		apb1: apb1_clk at 01c20054 {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun4i-a10-apb0-clk";
>> +			reg = <0x01c20054 0x4>;
>> +			clocks = <&ahb1>;
>> +			clock-output-names = "apb1";
>> +		};
>> +
>> +		apb2: apb2_clk at 01c20058 {
>> +			#clock-cells = <0>;
>> +			compatible = "allwinner,sun4i-a10-apb1-clk";
>> +			reg = <0x01c20058 0x4>;
>> +			clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
>> +			clock-output-names = "apb2";
>> +		};
>> +
>> +		bus_gates: clk at 01c20060 {
>> +			#clock-cells = <1>;
>> +			compatible = "allwinner,a64-bus-gates-clk",
> 
> see above
> 
>> +				     "allwinner,sunxi-multi-bus-gates-clk";
>> +			reg = <0x01c20060 0x14>;
>> +			ahb1_parent {
>> +				clocks = <&ahb1>;
>> +				clock-indices = <1>, <5>,
>> +						<6>, <8>,
>> +						<9>, <10>,
>> +						<13>, <14>,
>> +						<18>, <19>,
>> +						<20>, <21>,
>> +						<23>, <24>,
>> +						<25>, <28>,
>> +						<32>, <35>,
>> +						<36>, <37>,
>> +						<40>, <43>,
>> +						<44>, <52>,
>> +						<53>, <54>,
>> +						<135>;
>> +				clock-output-names = "bus_mipidsi", "bus_ce",
>> +						"bus_dma", "bus_mmc0",
>> +						"bus_mmc1", "bus_mmc2",
>> +						"bus_nand", "bus_sdram",
>> +						"bus_ts", "bus_hstimer",
>> +						"bus_spi0", "bus_spi1",
>> +						"bus_otg", "bus_otg_ehci0",
>> +						"bus_ehci0", "bus_otg_ohci0",
>> +						"bus_ve", "bus_lcd0",
>> +						"bus_lcd1", "bus_deint",
>> +						"bus_csi", "bus_hdmi",
>> +						"bus_de", "bus_gpu",
>> +						"bus_msgbox", "bus_spinlock",
>> +						"bus_dbg";
>> +			};
>> +			ahb2_parent {
>> +				clocks = <&ahb2>;
>> +				clock-indices = <17>, <29>;
>> +				clock-output-names = "bus_gmac", "bus_ohci0";
>> +			};
>> +			apb1_parent {
>> +				clocks = <&apb1>;
>> +				clock-indices = <64>, <65>,
>> +						<69>, <72>,
>> +						<76>, <77>,
>> +						<78>;
>> +				clock-output-names = "bus_codec", "bus_spdif",
>> +						"bus_pio", "bus_ths",
>> +						"bus_i2s0", "bus_i2s1",
>> +						"bus_i2s2";
>> +			};
>> +			abp2_parent {
>> +				clocks = <&apb2>;
>> +				clock-indices = <96>, <97>,
>> +						<98>, <101>,
>> +						<112>, <113>,
>> +						<114>, <115>,
>> +						<116>;
>> +				clock-output-names = "bus_i2c0", "bus_i2c1",
>> +						"bus_i2c2", "bus_scr",
>> +						"bus_uart0", "bus_uart1",
>> +						"bus_uart2", "bus_uart3",
>> +						"bus_uart4";
>> +			};
>> +		};
>> +
>> +		mmc0_clk: clk at 01c20088 {
>> +			#clock-cells = <1>;
>> +			compatible = "allwinner,sun4i-a10-mmc-clk";
>> +			reg = <0x01c20088 0x4>;
>> +			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
>> +			clock-output-names = "mmc0",
>> +					     "mmc0_output",
>> +					     "mmc0_sample";
>> +		};
>> +
>> +		mmc1_clk: clk at 01c2008c {
>> +			#clock-cells = <1>;
>> +			compatible = "allwinner,sun4i-a10-mmc-clk";
>> +			reg = <0x01c2008c 0x4>;
>> +			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
>> +			clock-output-names = "mmc1",
>> +					     "mmc1_output",
>> +					     "mmc1_sample";
>> +		};
>> +
>> +		mmc2_clk: clk at 01c20090 {
>> +			#clock-cells = <1>;
>> +			compatible = "allwinner,sun4i-a10-mmc-clk";
>> +			reg = <0x01c20090 0x4>;
>> +			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
>> +			clock-output-names = "mmc2",
>> +					     "mmc2_output",
>> +					     "mmc2_sample";
>> +		};
>> +	};
>> +
>> +	regulators {
>> +		reg_vcc3v3: vcc3v3 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "vcc3v3";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +		};
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		mmc0: mmc at 01c0f000 {
>> +			compatible = "allwinner,sun5i-a13-mmc";
>> +			reg = <0x01c0f000 0x1000>;
>> +			clocks = <&bus_gates 8>,
>> +				 <&mmc0_clk 0>,
>> +				 <&mmc0_clk 1>,
>> +				 <&mmc0_clk 2>;
>> +			clock-names = "ahb",
>> +				      "mmc",
>> +				      "output",
>> +				      "sample";
>> +			resets = <&ahb_rst 8>;
>> +			reset-names = "ahb";
>> +			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
>> +			status = "disabled";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +		};
>> +
>> +		mmc1: mmc at 01c10000 {
>> +			compatible = "allwinner,sun5i-a13-mmc";
>> +			reg = <0x01c10000 0x1000>;
>> +			clocks = <&bus_gates 9>,
>> +				 <&mmc1_clk 0>,
>> +				 <&mmc1_clk 1>,
>> +				 <&mmc1_clk 2>;
>> +			clock-names = "ahb",
>> +				      "mmc",
>> +				      "output",
>> +				      "sample";
>> +			resets = <&ahb_rst 9>;
>> +			reset-names = "ahb";
>> +			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
>> +			status = "disabled";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +		};
>> +
>> +		mmc2: mmc at 01c11000 {
>> +			compatible = "allwinner,sun5i-a13-mmc";
>> +			reg = <0x01c11000 0x1000>;
>> +			clocks = <&bus_gates 10>,
>> +				 <&mmc2_clk 0>,
>> +				 <&mmc2_clk 1>,
>> +				 <&mmc2_clk 2>;
>> +			clock-names = "ahb",
>> +				      "mmc",
>> +				      "output",
>> +				      "sample";
>> +			resets = <&ahb_rst 10>;
>> +			reset-names = "ahb";
>> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>> +			status = "disabled";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +		};
>> +
>> +		pio: pinctrl at 01c20800 {
>> +			compatible = "allwinner,a64-pinctrl";
> 
> see above
> 
>> +			reg = <0x01c20800 0x400>;
>> +			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&bus_gates 69>;
>> +			gpio-controller;
>> +			#gpio-cells = <3>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +
>> +			uart0_pins_a: uart0 at 0 {
>> +				allwinner,pins = "PB8", "PB9";
>> +				allwinner,function = "uart0";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			uart0_pins_b: uart0 at 1 {
>> +				allwinner,pins = "PF2", "PF3";
>> +				allwinner,function = "uart0";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			uart1_pins: uart1 at 0 {
>> +				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
>> +				allwinner,function = "uart1";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			uart2_pins: uart2 at 0 {
>> +				allwinner,pins = "PB0", "PB1", "PB2", "PB3";
>> +				allwinner,function = "uart2";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			uart3_pins_a: uart3 at 0 {
>> +				allwinner,pins = "PD0", "PD1";
>> +				allwinner,function = "uart3";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			uart3_pins_b: uart3 at 1 {
>> +				allwinner,pins = "PH4", "PH5", "PH6", "PH7";
>> +				allwinner,function = "uart3";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			uart4_pins: uart4 at 0 {
>> +				allwinner,pins = "PD2", "PD3", "PD4", "PD5";
>> +				allwinner,function = "uart4";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			mmc0_pins: mmc0 at 0 {
>> +				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
>> +						 "PF4", "PF5";
>> +				allwinner,function = "mmc0";
>> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			mmc0_default_cd_pin: mmc0_cd_pin at 0 {
>> +				allwinner,pins = "PF6";
>> +				allwinner,function = "gpio_in";
>> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> +			};
>> +
>> +			mmc1_pins: mmc1 at 0 {
>> +				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
>> +						 "PG4", "PG5";
>> +				allwinner,function = "mmc1";
>> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +
>> +			mmc2_pins: mmc2 at 0 {
>> +				allwinner,pins = "PC1", "PC5", "PC6", "PC8",
>> +						 "PC9", "PC10";
>> +				allwinner,function = "mmc2";
>> +				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> +				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +			};
>> +		};
>> +
>> +		ahb_rst: reset at 01c202c0 {
>> +			#reset-cells = <1>;
>> +			compatible = "allwinner,sun6i-a31-ahb1-reset";
>> +			reg = <0x01c202c0 0xc>;
>> +		};
>> +
>> +		apb1_rst: reset at 01c202d0 {
>> +			#reset-cells = <1>;
>> +			compatible = "allwinner,sun6i-a31-clock-reset";
>> +			reg = <0x01c202d0 0x4>;
>> +		};
>> +
>> +		apb2_rst: reset at 01c202d8 {
>> +			#reset-cells = <1>;
>> +			compatible = "allwinner,sun6i-a31-clock-reset";
>> +			reg = <0x01c202d8 0x4>;
>> +		};
>> +
>> +		uart0: serial at 01c28000 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x01c28000 0x400>;
>> +			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clocks = <&bus_gates 112>;
>> +			resets = <&apb2_rst 16>;
>> +			reset-names = "apb2";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart1: serial at 01c28400 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x01c28400 0x400>;
>> +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clocks = <&bus_gates 113>;
>> +			resets = <&apb2_rst 17>;
>> +			reset-names = "apb2";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart2: serial at 01c28800 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x01c28800 0x400>;
>> +			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clocks = <&bus_gates 114>;
>> +			resets = <&apb2_rst 18>;
>> +			reset-names = "apb2";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart3: serial at 01c28c00 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x01c28c00 0x400>;
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clocks = <&bus_gates 115>;
>> +			resets = <&apb2_rst 19>;
>> +			reset-names = "apb2";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart4: serial at 01c29000 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x01c29000 0x400>;
>> +			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clocks = <&bus_gates 116>;
>> +			resets = <&apb2_rst 20>;
>> +			reset-names = "apb2";
>> +			status = "disabled";
>> +		};
>> +
>> +		rtc: rtc at 01f00000 {
>> +			compatible = "allwinner,sun6i-a31-rtc";
>> +			reg = <0x01f00000 0x54>;
>> +			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +	};
>> +
>> +	gic: interrupt-controller@{
>> +		compatible = "arm,gic-400";
>> +		interrupt-controller;
>> +		#interrupt-cells = <3>;
>> +		#address-cells = <0>;
>> +
>> +		reg = <0x01C81000 0x1000>,
>> +		      <0x01C82000 0x2000>,
>> +		      <0x01C84000 0x2000>,
>> +		      <0x01C86000 0x2000>;
>> +		interrupts = <GIC_PPI 9
>> +		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +	};
>> +};
>> -- 
>> 2.6.4
> 
> Regards,
> Karsten
>