Re: [PATCH 2/2] add support for DWC UFS Host Controller

[Joao Pinto <Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>]

Hi Akinobu,

Thanks for the comments!
I will put the internal functions static and check your notify suggestion.
Do you know who the maintainer of UFS is?

Thanks,
Joao

On 2/9/2016 12:05 PM, Akinobu Mita wrote:
> Hi Joao,
> 
> 2016-02-09 4:07 GMT+09:00 Joao Pinto <Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>:
>> diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
>> new file mode 100644
>> index 0000000..b12b1a8
>> --- /dev/null
>> +++ b/drivers/scsi/ufs/ufshcd-dwc.c
>> @@ -0,0 +1,768 @@
>> +/*
>> + * UFS Host driver for Synopsys Designware Core
>> + *
>> + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
>> + *
>> + * Authors: Joao Pinto <jpinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include "ufshcd.h"
>> +#include "unipro.h"
>> +
>> +#include "ufshcd-dwc.h"
>> +#include "ufshci-dwc.h"
>> +
>> +/**
>> + * ufshcd_dwc_program_clk_div()
>> + * This function programs the clk divider value. This value is needed to
>> + * provide 1 microsecond tick to unipro layer.
>> + * @hba: Private Structure pointer
>> + * @divider_val: clock divider value to be programmed
>> + *
>> + */
>> +void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
>> +{
>> +       ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
>> +}
>> +EXPORT_SYMBOL(ufshcd_dwc_program_clk_div);
>> +
>> +/**
>> + * ufshcd_dwc_link_is_up()
>> + * Check if link is up
>> + * @hba: private structure poitner
>> + *
>> + * Returns 0 on success, non-zero value on failure
>> + */
>> +int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
>> +{
>> +       int dme_result = 0;
>> +
>> +       ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
>> +
>> +       if (dme_result == UFSHCD_LINK_IS_UP) {
>> +               ufshcd_set_link_active(hba);
>> +               return 0;
>> +       }
>> +
>> +       return 1;
>> +}
>> +EXPORT_SYMBOL(ufshcd_dwc_link_is_up);
>> +
>> +/**
>> + * ufshcd_dwc_connection_setup()
>> + * This function configures both the local side (host) and the peer side
>> + * (device) unipro attributes to establish the connection to application/
>> + * cport.
>> + * This function is not required if the hardware is properly configured to
>> + * have this connection setup on reset. But invoking this function does no
>> + * harm and should be fine even working with any ufs device.
>> + *
>> + * @hba: pointer to drivers private data
>> + *
>> + * Returns 0 on success non-zero value on failure
>> + */
>> +int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
>> +{
>> +       int ret = 0;
>> +
>> +       /* Local side Configuration */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERCPORTID), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), 0x6);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTMODE), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +
>> +       /* Peer side Configuration */
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(N_DEVICEID), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_PEERCPORTID), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), 0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), 0x6);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CPORTMODE), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +       ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 1);
>> +       if (ret)
>> +               goto out;
>> +
>> +out:
>> +       return ret;
>> +}
>> +
>> +/**
>> + * ufshcd_dwc_setup_20bit_rmmi_lane0()
>> + * This function configures Synopsys MPHY 20-bit RMMI Lane 0
>> + * @hba: Pointer to drivers structure
>> + *
>> + * Returns 0 on success or non-zero value on failure
>> + */
>> +int ufshcd_dwc_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
>> +{
>> +       int ret = 0;
>> +
>> +       /* TX Reference Clock 26MHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ,
>> +                                                       SELIND_LN0_TX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* TX Configuration Clock Frequency Val; Divider setting */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL,
>> +                                                       SELIND_LN0_TX), 0x19);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Configuration Clock Frequency Val; Divider setting */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL,
>> +                                                       SELIND_LN0_RX), 0x19);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* TX 20-bit RMMI Interface */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR,
>> +                                                       SELIND_LN0_TX), 0x12);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* TX dither configuration */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2,
>> +                                                       SELIND_LN0_TX), 0xd6);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Reference Clock 26MHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ,
>> +                                                       SELIND_LN0_RX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX 20-bit RMMI Interface */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN,
>> +                                                       SELIND_LN0_RX), 2);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Squelch Detector output is routed to RX hibern8 exit signal */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
>> +                                                       SELIND_LN0_RX), 0x80);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block Direct Control 10 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL10), 0x04);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block Direct Control 19 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL19), 0x02);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* ENARXDIRECTCFG4 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4,
>> +                                                       SELIND_LN0_RX), 0x03);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CFGRXOVR8 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8,
>> +                                                       SELIND_LN0_RX), 0x16);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RXDIRECTCTRL2 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2,
>> +                                                       SELIND_LN0_RX), 0x42);
>> +
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* ENARXDIRECTCFG3 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3,
>> +                                                       SELIND_LN0_RX), 0xa4);
>> +
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RXCALCTRL */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL,
>> +                                                       SELIND_LN0_RX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* ENARXDIRECTCFG2 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2,
>> +                                                       SELIND_LN0_RX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CFGOVR4 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4,
>> +                                                       SELIND_LN0_RX), 0x28);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RXSQCTRL */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL,
>> +                                                       SELIND_LN0_RX), 0x1E);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CFGOVR6 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6,
>> +                                                       SELIND_LN0_RX), 0x2f);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CBPRGPLL2 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGPLL2), 0x00);
>> +
>> +out:
>> +       return ret;
>> +}
>> +
>> +/**
>> + * ufshcd_dwc_setup_20bit_rmmi_lane1()
>> + * This function configures Synopsys MPHY 20-bit RMMI Lane 1
>> + * @hba: Pointer to drivers structure
>> + *
>> + * Returns 0 on success or non-zero value on failure
>> + */
>> +int ufshcd_dwc_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
>> +{
>> +       int connected_rx_lanes = 0;
>> +       int connected_tx_lanes = 0;
>> +       int ret = 0;
>> +
>> +       /* Get the available lane count */
>> +       ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
>> +                       &connected_rx_lanes);
>> +       ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
>> +                       &connected_tx_lanes);
>> +
>> +       if (connected_tx_lanes == 2) {
>> +
>> +               /* TX Reference Clock 26MHz */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ,
>> +                                                       SELIND_LN1_TX), 0x0d);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* TX Configuration Clock Frequency Val; Divider setting */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL,
>> +                                                       SELIND_LN1_TX), 0x19);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* TX 20-bit RMMI Interface */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR,
>> +                                                       SELIND_LN1_TX), 0x12);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* TX dither configuration */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2,
>> +                                                       SELIND_LN0_TX), 0xd6);
>> +               if (ret)
>> +                       goto out;
>> +       }
>> +
>> +       if (connected_rx_lanes == 2) {
>> +
>> +               /* RX Reference Clock 26MHz */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ,
>> +                                                       SELIND_LN1_RX), 0x01);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* RX Configuration Clock Frequency Val; Divider setting */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL,
>> +                                                       SELIND_LN1_RX), 0x19);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* RX 20-bit RMMI Interface */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN,
>> +                                                       SELIND_LN1_RX), 2);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* RX Squelch Detector output is routed to RX hibern8 exit
>> +                * signal
>> +                */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
>> +                                                       SELIND_LN1_RX), 0x80);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* ENARXDIRECTCFG4 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4,
>> +                                                       SELIND_LN1_RX), 0x03);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* CFGRXOVR8 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8,
>> +                                                       SELIND_LN1_RX), 0x16);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* RXDIRECTCTRL2 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2,
>> +                                                       SELIND_LN1_RX), 0x42);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* ENARXDIRECTCFG3 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3,
>> +                                                       SELIND_LN1_RX), 0xa4);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* RXCALCTRL */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL,
>> +                                                       SELIND_LN1_RX), 0x01);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* ENARXDIRECTCFG2 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2,
>> +                                                       SELIND_LN1_RX), 0x01);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* CFGOVR4 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4,
>> +                                                       SELIND_LN1_RX), 0x28);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* RXSQCTRL */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL,
>> +                                                       SELIND_LN1_RX), 0x1E);
>> +               if (ret)
>> +                       goto out;
>> +
>> +               /* CFGOVR6 */
>> +               ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6,
>> +                                                       SELIND_LN1_RX), 0x2f);
>> +               if (ret)
>> +                       goto out;
>> +       }
>> +
>> +out:
>> +       return ret;
>> +}
>> +
>> +/**
>> + * ufshcd_dwc_setup_20bit_rmmi()
>> + * This function configures Synopsys MPHY specific atributes (20-bit RMMI)
>> + * @hba: Pointer to drivers structure
>> + *
>> + * Returns 0 on success or non-zero value on failure
>> + */
>> +int ufshcd_dwc_setup_20bit_rmmi(struct ufs_hba *hba)
>> +{
>> +       int ret = 0;
>> +
>> +       /* Common block Tx Global Hibernate Exit */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block Reference Clock Mode 26MHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(REFCLKMODE), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block DCO Target Frequency MAX PWM G1:9Mpbs */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CDIRECTCTRL6), 0xc0);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block TX and RX Div Factor is 4 7Mbps/20 = 350KHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDIVFACTOR), 0x44);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common Block DC0 Ctrl 5*/
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDCOCTRL5), 0x64);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common Block Program Tunning*/
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGTUNING), 0x09);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common Block Real Time Observe Select - for debugging */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(RTOBSERVESELECT), 0x00);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Lane 0 configuration*/
>> +       ret = ufshcd_dwc_setup_20bit_rmmi_lane0(hba);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Lane 1 configuration*/
>> +       ret = ufshcd_dwc_setup_20bit_rmmi_lane1(hba);
>> +       if (ret)
>> +               goto out;
>> +
>> +out:
>> +       return ret;
>> +}
>> +
>> +/**
>> + * ufshcd_dwc_setup_40bit_rmmi()
>> + * This function configures Synopsys MPHY specific atributes (40-bit RMMI)
>> + * @hba: Pointer to drivers structure
>> + *
>> + * Returns 0 on success or non-zero value on failure
>> + */
>> +int ufshcd_dwc_setup_40bit_rmmi(struct ufs_hba *hba)
>> +{
>> +       int ret = 0;
>> +
>> +       /* Common block Tx Global Hibernate Exit */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block Reference Clock Mode 26MHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(REFCLKMODE), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block DCO Target Frequency MAX PWM G1:7Mpbs */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CDIRECTCTRL6), 0x80);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block TX and RX Div Factor is 4 7Mbps/40 = 175KHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDIVFACTOR), 0x08);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common Block DC0 Ctrl 5*/
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDCOCTRL5), 0x64);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common Block Program Tunning*/
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGTUNING), 0x09);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common Block Real Time Observe Select - for debugging */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(RTOBSERVESELECT), 0x00);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Lane 0 configuration*/
>> +
>> +       /* TX Reference Clock 26MHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ,
>> +                                                       SELIND_LN0_TX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* TX Configuration Clock Frequency Val; Divider setting */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL,
>> +                                                       SELIND_LN0_TX), 0x19);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* TX 40-bit RMMI Interface */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR,
>> +                                                       SELIND_LN0_TX), 0x14);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* TX dither configuration */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2,
>> +                                                       SELIND_LN0_TX), 0xd6);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Reference Clock 26MHz */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ,
>> +                                                       SELIND_LN0_RX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Configuration Clock Frequency Val; Divider setting */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL,
>> +                                                       SELIND_LN0_RX), 0x19);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX 40-bit RMMI Interface */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN,
>> +                                                       SELIND_LN0_RX), 4);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Squelch Detector output is routed to RX hibern8 exit signal */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
>> +                                                       SELIND_LN0_RX), 0x80);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Squelch Detector output is routed to RX hibern8 exit signal */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
>> +                                                       SELIND_LN0_RX), 0x80);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block Direct Control 10 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL10), 0x04);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* Common block Direct Control 19 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL19), 0x02);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RX Squelch Detector output is routed to RX hibern8 exit signal */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
>> +                                                       SELIND_LN0_RX), 0x80);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* ENARXDIRECTCFG4 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4,
>> +                                                       SELIND_LN0_RX), 0x03);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CFGRXOVR8 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8,
>> +                                                       SELIND_LN0_RX), 0x16);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RXDIRECTCTRL2 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2,
>> +                                                       SELIND_LN0_RX), 0x42);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* ENARXDIRECTCFG3 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3,
>> +                                                       SELIND_LN0_RX), 0xa4);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RXCALCTRL */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL,
>> +                                                       SELIND_LN0_RX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* ENARXDIRECTCFG2 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2,
>> +                                                       SELIND_LN0_RX), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CFGOVR4 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4,
>> +                                                       SELIND_LN0_RX), 0x28);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* RXSQCTRL */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL,
>> +                                                       SELIND_LN0_RX), 0x1E);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CFGOVR6 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6,
>> +                                                       SELIND_LN0_RX), 0x2f);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* CBPRGPLL2 */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGPLL2), 0x00);
>> +       if (ret)
>> +               goto out;
>> +
>> +out:
>> +       return ret;
>> +}
>> +
>> +/**
>> + * ufshcd_dwc_setup_mphy()
>> + * This function configures Local (host) Synopsys MPHY specific attributes
>> + *
>> + * @hba: Pointer to drivers structure
>> + *
>> + * Returns 0 on success non-zero value on failure
>> + */
>> +int ufshcd_dwc_setup_mphy(struct ufs_hba *hba)
>> +{
>> +       int ret = 0;
>> +
>> +#ifdef CONFIG_SCSI_UFS_DWC_40BIT_RMMI
>> +       dev_info(hba->dev, "Configuring MPHY 40-bit RMMI");
>> +       ret = ufshcd_dwc_setup_40bit_rmmi(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "40-bit RMMI configuration failed");
>> +               goto out;
>> +       }
>> +#else
>> +#ifdef CONFIG_SCSI_UFS_DWC_20BIT_RMMI
>> +       dev_info(hba->dev, "Configuring MPHY 20-bit RMMI");
>> +       ret = ufshcd_dwc_setup_20bit_rmmi(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "20-bit RMMI configuration failed");
>> +               goto out;
>> +       }
>> +#endif
>> +#endif
>> +       /* To write Shadow register bank to effective configuration block */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
>> +       if (ret)
>> +               goto out;
>> +
>> +       /* To configure Debug OMC */
>> +       ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
>> +
>> +out:
>> +       return ret;
>> +}
> 
> These functions are only used in this file.
> 
> ufshcd_dwc_program_clk_div
> ufshcd_dwc_link_is_up
> ufshcd_dwc_connection_setup
> ufshcd_dwc_setup_20bit_rmmi_lane0
> ufshcd_dwc_setup_20bit_rmmi_lane1
> ufshcd_dwc_setup_20bit_rmmi
> ufshcd_dwc_setup_40bit_rmmi
> ufshcd_dwc_setup_mphy
> 
> So you can make them static functions.
> 
>> +/**
>> + * ufshcd_dwc_configuration()
>> + * UFS Host DWC specific configuration
>> + * @hba: private structure poitner
>> + *
>> + * Returns 0 on success, non-zero value on failure
>> + */
>> +int ufshcd_dwc_configuration(struct ufs_hba *hba)
>> +{
>> +       int ret = 0;
>> +
>> +       /* Program Clock Divider Value */
>> +       ufshcd_dwc_program_clk_div(hba, UFSHCD_CLK_DIV_125);
>> +
>> +#ifdef CONFIG_SCSI_UFS_DWC_MPHY_TC
>> +       ret = ufshcd_dwc_setup_mphy(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "MPHY configuration failed (%d)", ret);
>> +               goto out;
>> +       }
>> +#endif
>> +       ret = ufshcd_dme_link_startup(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "Link Startup command failed (%d)", ret);
>> +               goto out;
>> +       }
>> +
>> +       ret = ufshcd_dwc_link_is_up(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "Link is not up");
>> +               goto out;
>> +       }
>> +
>> +       ret = ufshcd_dwc_connection_setup(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "Connection setup failed (%d)", ret);
>> +               goto out;
>> +       }
>> +
>> +       ret = ufshcd_make_hba_operational(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "HBA kick start failed (%d)", ret);
>> +               goto out;
>> +       }
>> +
>> +       ret = ufshcd_verify_dev_init(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "Device init failed (%d)", ret);
>> +               goto out;
>> +       }
>> +
>> +       ret = ufshcd_complete_dev_init(hba);
>> +       if (ret) {
>> +               dev_err(hba->dev, "Device final init failed (%d)", ret);
>> +               goto out;
>> +       }
>> +
>> +       ufshcd_set_ufs_dev_active(hba);
>> +       hba->wlun_dev_clr_ua = false;
>> +
>> +       if (hba->ufshcd_state == UFSHCD_STATE_RESET)
>> +               scsi_unblock_requests(hba->host);
>> +
>> +       hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
>> +
>> +       scsi_scan_host(hba->host);
>> +
>> +out:
>> +       return ret;
>> +}
>> +EXPORT_SYMBOL(ufshcd_dwc_configuration);
> 
> Do you really need this alternative initialization by
> adding new custom_probe_hba() in vops?  I think you only need to write
> link_startup_notify() callback for ufs_dwc_hba_vops like below.
> 
> ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
>                                 enum ufs_notify_change_status status)
> {
>         if (status == PRE_CHANGE) {
>                 ufshcd_dwc_program_clk_div();
>                 ufshcd_dwc_setup_mphy();
>         } else { /* POST_CHANGE */
>                 err = ufshcd_dwc_link_is_up(hba);
>                 if (err)
>                         return err;
>                 ufshcd_dwc_connection_setup();
>         }
> }
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html