From: ddaney@caviumnetworks.com (David Daney)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: Add workaround for Cavium erratum 27456
Date: Wed, 10 Feb 2016 10:08:17 -0800 [thread overview]
Message-ID: <56BB7C91.5010205@caviumnetworks.com> (raw)
In-Reply-To: <20160210092822.GA1052@arm.com>
On 02/10/2016 01:28 AM, Will Deacon wrote:
> On Tue, Feb 09, 2016 at 11:29:16AM -0800, David Daney wrote:
>> From: Andrew Pinski <apinski@cavium.com>
>>
>> On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
>> instructions may cause the icache to become invalid if it contains
>> data for a non-current ASID.
>>
>> This patch implements the workaround (which flushes the local icache
>> when switching the mm) by using code patching.
>
> So, to be clear, is this "just" a performance problem as opposed to a
> correctness issue?
No. It is a correctness issue. Without this workaround in place,
userspace programs end up executing the wrong instructions, which leads
to unpredictable behavior and program crashes.
> If so, do you have any numbers with and without this
> change?
We tried to measure it, but the impact is not measurable in the tests we
have done. Switching the mm is not often done so the extra ICache
invalidation is rare.
Also note that for the non-workaround case, the code path is unchanged.
Since the following function (__cpu_setup()) is not on the hot path of
anything, any extra ICache pressure from the three NOPs is unlikely to
matter.
>
> Will
>
WARNING: multiple messages have this Message-ID (diff)
From: David Daney <ddaney@caviumnetworks.com>
To: Will Deacon <will.deacon@arm.com>
Cc: David Daney <ddaney.cavm@gmail.com>,
<linux-arm-kernel@lists.infradead.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Marc Zyngier <marc.zyngier@arm.com>,
<linux-kernel@vger.kernel.org>,
Andrew Pinski <apinski@cavium.com>,
David Daney <david.daney@cavium.com>
Subject: Re: [PATCH] arm64: Add workaround for Cavium erratum 27456
Date: Wed, 10 Feb 2016 10:08:17 -0800 [thread overview]
Message-ID: <56BB7C91.5010205@caviumnetworks.com> (raw)
In-Reply-To: <20160210092822.GA1052@arm.com>
On 02/10/2016 01:28 AM, Will Deacon wrote:
> On Tue, Feb 09, 2016 at 11:29:16AM -0800, David Daney wrote:
>> From: Andrew Pinski <apinski@cavium.com>
>>
>> On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
>> instructions may cause the icache to become invalid if it contains
>> data for a non-current ASID.
>>
>> This patch implements the workaround (which flushes the local icache
>> when switching the mm) by using code patching.
>
> So, to be clear, is this "just" a performance problem as opposed to a
> correctness issue?
No. It is a correctness issue. Without this workaround in place,
userspace programs end up executing the wrong instructions, which leads
to unpredictable behavior and program crashes.
> If so, do you have any numbers with and without this
> change?
We tried to measure it, but the impact is not measurable in the tests we
have done. Switching the mm is not often done so the extra ICache
invalidation is rare.
Also note that for the non-workaround case, the code path is unchanged.
Since the following function (__cpu_setup()) is not on the hot path of
anything, any extra ICache pressure from the three NOPs is unlikely to
matter.
>
> Will
>
next prev parent reply other threads:[~2016-02-10 18:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 19:29 [PATCH] arm64: Add workaround for Cavium erratum 27456 David Daney
2016-02-09 19:29 ` David Daney
2016-02-09 19:52 ` Marc Zyngier
2016-02-09 19:52 ` Marc Zyngier
2016-02-09 19:59 ` David Daney
2016-02-09 19:59 ` David Daney
2016-02-09 20:07 ` Marc Zyngier
2016-02-09 20:07 ` Marc Zyngier
2016-02-10 9:28 ` Will Deacon
2016-02-10 9:28 ` Will Deacon
2016-02-10 18:08 ` David Daney [this message]
2016-02-10 18:08 ` David Daney
2016-02-10 18:15 ` Will Deacon
2016-02-10 18:15 ` Will Deacon
2016-02-10 18:42 ` David Daney
2016-02-10 18:42 ` David Daney
2016-02-11 13:07 ` Will Deacon
2016-02-11 13:07 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BB7C91.5010205@caviumnetworks.com \
--to=ddaney@caviumnetworks.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.