From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: vinod.koul@intel.com
Cc: linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, nsekhar@ti.com,
linux-omap@vger.kernel.org
Subject: Re: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
Date: Thu, 11 Feb 2016 11:00:47 +0200 [thread overview]
Message-ID: <56BC4DBF.8080605@ti.com> (raw)
In-Reply-To: <1455180894-2672-1-git-send-email-peter.ujfalusi@ti.com>
On 02/11/2016 10:54 AM, Peter Ujfalusi wrote:
> We need the callback to support the dmaengine_terminate_sync().
I have made some typos and I only compiled the kernel after sending the patch..
Resending.
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> drivers/dma/omap-dma.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> index e691f48f9d73..7c6a300b6b57 100644
> --- a/drivers/dma/omap-dma.c
> +++ b/drivers/dma/omap-dma.c
> @@ -1007,6 +1007,13 @@ static int omap_dma_terminate_all(struct dma_chan *chan)
> return 0;
> }
>
> +static void omap_dma_synchronize(struct dma_chan *c)
> +{
> + struct omap_chan *c = to_omap_dma_chan(chan);
> +
> + vchan_synchronize(&c->vc);
> +}
> +
> static int omap_dma_pause(struct dma_chan *chan)
> {
> struct omap_chan *c = to_omap_dma_chan(chan);
> @@ -1110,6 +1117,7 @@ static int omap_dma_probe(struct platform_device *pdev)
> od->ddev.device_pause = omap_dma_pause;
> od->ddev.device_resume = omap_dma_resume;
> od->ddev.device_terminate_all = omap_dma_terminate_all;
> + od-ddev.device_synchronize = omap_dma_synchronize;
> od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
>
--
Péter
WARNING: multiple messages have this Message-ID (diff)
From: peter.ujfalusi@ti.com (Peter Ujfalusi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
Date: Thu, 11 Feb 2016 11:00:47 +0200 [thread overview]
Message-ID: <56BC4DBF.8080605@ti.com> (raw)
In-Reply-To: <1455180894-2672-1-git-send-email-peter.ujfalusi@ti.com>
On 02/11/2016 10:54 AM, Peter Ujfalusi wrote:
> We need the callback to support the dmaengine_terminate_sync().
I have made some typos and I only compiled the kernel after sending the patch..
Resending.
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> drivers/dma/omap-dma.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> index e691f48f9d73..7c6a300b6b57 100644
> --- a/drivers/dma/omap-dma.c
> +++ b/drivers/dma/omap-dma.c
> @@ -1007,6 +1007,13 @@ static int omap_dma_terminate_all(struct dma_chan *chan)
> return 0;
> }
>
> +static void omap_dma_synchronize(struct dma_chan *c)
> +{
> + struct omap_chan *c = to_omap_dma_chan(chan);
> +
> + vchan_synchronize(&c->vc);
> +}
> +
> static int omap_dma_pause(struct dma_chan *chan)
> {
> struct omap_chan *c = to_omap_dma_chan(chan);
> @@ -1110,6 +1117,7 @@ static int omap_dma_probe(struct platform_device *pdev)
> od->ddev.device_pause = omap_dma_pause;
> od->ddev.device_resume = omap_dma_resume;
> od->ddev.device_terminate_all = omap_dma_terminate_all;
> + od-ddev.device_synchronize = omap_dma_synchronize;
> od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
>
--
P?ter
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vinod.koul@intel.com>
Cc: <linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <nsekhar@ti.com>,
<linux-omap@vger.kernel.org>
Subject: Re: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
Date: Thu, 11 Feb 2016 11:00:47 +0200 [thread overview]
Message-ID: <56BC4DBF.8080605@ti.com> (raw)
In-Reply-To: <1455180894-2672-1-git-send-email-peter.ujfalusi@ti.com>
On 02/11/2016 10:54 AM, Peter Ujfalusi wrote:
> We need the callback to support the dmaengine_terminate_sync().
I have made some typos and I only compiled the kernel after sending the patch..
Resending.
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> drivers/dma/omap-dma.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> index e691f48f9d73..7c6a300b6b57 100644
> --- a/drivers/dma/omap-dma.c
> +++ b/drivers/dma/omap-dma.c
> @@ -1007,6 +1007,13 @@ static int omap_dma_terminate_all(struct dma_chan *chan)
> return 0;
> }
>
> +static void omap_dma_synchronize(struct dma_chan *c)
> +{
> + struct omap_chan *c = to_omap_dma_chan(chan);
> +
> + vchan_synchronize(&c->vc);
> +}
> +
> static int omap_dma_pause(struct dma_chan *chan)
> {
> struct omap_chan *c = to_omap_dma_chan(chan);
> @@ -1110,6 +1117,7 @@ static int omap_dma_probe(struct platform_device *pdev)
> od->ddev.device_pause = omap_dma_pause;
> od->ddev.device_resume = omap_dma_resume;
> od->ddev.device_terminate_all = omap_dma_terminate_all;
> + od-ddev.device_synchronize = omap_dma_synchronize;
> od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
>
--
Péter
next prev parent reply other threads:[~2016-02-11 9:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-11 8:54 [PATCH] dmaengine: omap-dma: Implement device_synchronize callback Peter Ujfalusi
2016-02-11 8:54 ` Peter Ujfalusi
2016-02-11 8:54 ` Peter Ujfalusi
2016-02-11 9:00 ` Peter Ujfalusi [this message]
2016-02-11 9:00 ` Peter Ujfalusi
2016-02-11 9:00 ` Peter Ujfalusi
2016-02-11 10:28 ` kbuild test robot
2016-02-11 10:28 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BC4DBF.8080605@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.