From: Laurent Vivier <lvivier@redhat.com>
To: Andrew Jones <drjones@redhat.com>,
kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Cc: thuth@redhat.com, dgibson@redhat.com,
david@gibson.dropbear.id.au, agraf@suse.de, pbonzini@redhat.com
Subject: Re: [kvm-unit-tests PATCH v2 00/14] ppc64: initial drop
Date: Thu, 11 Feb 2016 13:36:57 +0000 [thread overview]
Message-ID: <56BC8E79.7050409@redhat.com> (raw)
In-Reply-To: <1454957594-30601-1-git-send-email-drjones@redhat.com>
Hi,
On 08/02/2016 19:53, Andrew Jones wrote:
> It's been a loooong time since I posted v1 of this series, but thanks
> to Thomas' poking, and even volunteering to help move v2 along, I've
> finally picked it back up.
>
> v2:
> Besides rebasing on latest master, v2 addresses all of David's comments
> - assembler cleanup
> - jump into the RTAS blob we get from DT, instead of reproducing it
> - don't store the RTAS root node, always hunt it down
>
> v2 didn't address debug-exit, and we still need a solution for that.
> Plugging chr-testdev into an spapr vty is probably what we should
> investigate first (as was suggested by Alex Graf under the v1 review).
> For this v2 I just kept the hack from v1, but simplified it and
> explicitly call it out as the hack that it is.
>
> Additional known issues:
> Latest F22 cross-compiler (gcc5 based) doesn't generate working
> code with this series. I didn't try to debug. The 4.9 based compiler
> I initially used on v1 works, so I reverted to that one.
>
> Testing:
> I only tested with qemu-system-ppc64 (latest) on x86_64 so far. I'll
> try to get a machine to test with real hardware (and KVM) unless
> someone (hi Thomas :-) beats me to it.
I've tested the series from the branch initial-drop-v2:
- On RHEL 7.2 ppc64 (ppc64le is not supported ?), POWER8 + kvm_hv.
I have (sometime) an error:
./powerpc/run: line 60: exit: too many arguments
PASS selftest-setup
Which is in fact:
/usr/libexec/qemu-kvm -machine pseries,accel=kvm -bios
powerpc/boot_rom.bin -display none -serial stdio -kernel
powerpc/selftest.elf -smp 2 -m 256 -append setup smp=2 mem%6
PASS: selftest: setup: smp: nr_cpus = 2
PASS: selftest: setup: mem: size = 256 MB
SUMMARY: 2 tests, 0 unexpected failures
EXIT: STATUS=1
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS\x12
Return value from qemu: 1 127 127 127 127 127 127 127 127 127 127 127 12
./powerpc/run: line 60: exit: too many arguments
- On fedora 23 on PowerMac G5 (ppc64) kvm_pr, it doesn't work at all:
lib/powerpc/setup.c:60: assert failed
59 assert(freemem_start >= mem_start && freemem_start < mem_end);
The values I have are:
freemem_start 434000 mem_start 8000000 mem_end 10000000
>
> Standard cover-letter summary:
> This series brings basic setup; starts a test's C entry point, main(),
> and printf, exit, and malloc work. Three more series should follow this
> one which must bring; vector support, mmu support, and smp support, at
> which point I believe the framework could just evolve with the creation
> of unit tests.
>
> Patches also available here
> https://github.com/rhdrjones/kvm-unit-tests/commits/ppc64/initial-drop-v2
>
>
> Andrew Jones (14):
> lib: asm-generic: add missing casts
> lib: share arm-selftest utility functions
> config: no need to mix arch makefiles
> powerpc/ppc64: start skeleton framework
> powerpc/pp64: ppc-ify makefiles and linker script
> powerpc/ppc64: add boot rom source
> powerpc/ppc64: add bootloader to bounce into memory
> powerpc/ppc64: add HV putchar
> powerpc/ppc64: adapt arm's setup
> powerpc/ppc64: relocate linker VMAs
> powerpc/ppc64: add run script and unittests.cfg
> mkstandalone: add support for powerpc
> powerpc/ppc64: add RTAS support
> powerpc/ppc64: HACK: make a fake debug-exit
>
> Makefile | 2 +-
> README | 3 +-
> arm/Makefile | 1 +
> config/config-arm.mak => arm/Makefile.arm | 2 +-
> config/config-arm64.mak => arm/Makefile.arm64 | 2 +-
> .../config-arm-common.mak => arm/Makefile.common | 3 +-
> arm/selftest.c | 45 +++-----
> configure | 6 ++
> lib/asm-generic/io.h | 12 +--
> lib/libcflat.h | 11 +-
> lib/powerpc/.gitignore | 1 +
> lib/powerpc/asm/rtas.h | 26 +++++
> lib/powerpc/asm/setup.h | 27 +++++
> lib/powerpc/io.c | 37 +++++++
> lib/powerpc/mmu.c | 0
> lib/powerpc/rtas.c | 120 +++++++++++++++++++++
> lib/powerpc/setup.c | 91 ++++++++++++++++
> lib/powerpc/smp.c | 0
> lib/ppc64/.gitignore | 1 +
> lib/ppc64/asm-offsets.c | 12 +++
> lib/ppc64/asm/asm-offsets.h | 1 +
> lib/ppc64/asm/io.h | 5 +
> lib/ppc64/asm/page.h | 1 +
> lib/ppc64/asm/rtas.h | 1 +
> lib/ppc64/asm/setup.h | 1 +
> lib/ppc64/asm/spinlock.h | 11 ++
> lib/ppc64/processor.c | 0
> lib/ppc64/spinlock.c | 11 ++
> lib/report.c | 16 +++
> lib/util.c | 18 ++++
> lib/util.h | 23 ++++
> powerpc/Makefile | 1 +
> powerpc/Makefile.common | 65 +++++++++++
> powerpc/Makefile.ppc64 | 21 ++++
> powerpc/boot_rom.bin | Bin 0 -> 280 bytes
> powerpc/cstart64.S | 86 +++++++++++++++
> powerpc/flat.lds | 44 ++++++++
> powerpc/reloc64.c | 55 ++++++++++
> powerpc/rom/.gitignore | 1 +
> powerpc/rom/Makefile | 36 +++++++
> powerpc/rom/header.img | 1 +
> powerpc/rom/rom.ffs | 4 +
> powerpc/rom/stage1.S | 5 +
> powerpc/run | 60 +++++++++++
> powerpc/selftest.c | 65 +++++++++++
> powerpc/unittests.cfg | 30 ++++++
> {config => scripts}/asm-offsets.mak | 0
> scripts/mkstandalone.sh | 5 +
> x86/Makefile | 1 +
> .../config-x86-common.mak => x86/Makefile.common | 0
> config/config-i386.mak => x86/Makefile.i386 | 2 +-
> config/config-x86_64.mak => x86/Makefile.x86_64 | 2 +-
> 52 files changed, 924 insertions(+), 50 deletions(-)
> create mode 100644 arm/Makefile
> rename config/config-arm.mak => arm/Makefile.arm (90%)
> rename config/config-arm64.mak => arm/Makefile.arm64 (89%)
> rename config/config-arm-common.mak => arm/Makefile.common (96%)
> create mode 100644 lib/powerpc/.gitignore
> create mode 100644 lib/powerpc/asm/rtas.h
> create mode 100644 lib/powerpc/asm/setup.h
> create mode 100644 lib/powerpc/io.c
> create mode 100644 lib/powerpc/mmu.c
> create mode 100644 lib/powerpc/rtas.c
> create mode 100644 lib/powerpc/setup.c
> create mode 100644 lib/powerpc/smp.c
> create mode 100644 lib/ppc64/.gitignore
> create mode 100644 lib/ppc64/asm-offsets.c
> create mode 100644 lib/ppc64/asm/asm-offsets.h
> create mode 100644 lib/ppc64/asm/io.h
> create mode 100644 lib/ppc64/asm/page.h
> create mode 100644 lib/ppc64/asm/rtas.h
> create mode 100644 lib/ppc64/asm/setup.h
> create mode 100644 lib/ppc64/asm/spinlock.h
> create mode 100644 lib/ppc64/processor.c
> create mode 100644 lib/ppc64/spinlock.c
> create mode 100644 lib/util.c
> create mode 100644 lib/util.h
> create mode 100644 powerpc/Makefile
> create mode 100644 powerpc/Makefile.common
> create mode 100644 powerpc/Makefile.ppc64
> create mode 100644 powerpc/boot_rom.bin
> create mode 100644 powerpc/cstart64.S
> create mode 100644 powerpc/flat.lds
> create mode 100644 powerpc/reloc64.c
> create mode 100644 powerpc/rom/.gitignore
> create mode 100644 powerpc/rom/Makefile
> create mode 100644 powerpc/rom/header.img
> create mode 100644 powerpc/rom/rom.ffs
> create mode 100644 powerpc/rom/stage1.S
> create mode 100755 powerpc/run
> create mode 100644 powerpc/selftest.c
> create mode 100644 powerpc/unittests.cfg
> rename {config => scripts}/asm-offsets.mak (100%)
> create mode 100644 x86/Makefile
> rename config/config-x86-common.mak => x86/Makefile.common (100%)
> rename config/config-i386.mak => x86/Makefile.i386 (91%)
> rename config/config-x86_64.mak => x86/Makefile.x86_64 (93%)
>
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Vivier <lvivier@redhat.com>
To: Andrew Jones <drjones@redhat.com>,
kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Cc: thuth@redhat.com, dgibson@redhat.com,
david@gibson.dropbear.id.au, agraf@suse.de, pbonzini@redhat.com
Subject: Re: [kvm-unit-tests PATCH v2 00/14] ppc64: initial drop
Date: Thu, 11 Feb 2016 14:36:57 +0100 [thread overview]
Message-ID: <56BC8E79.7050409@redhat.com> (raw)
In-Reply-To: <1454957594-30601-1-git-send-email-drjones@redhat.com>
Hi,
On 08/02/2016 19:53, Andrew Jones wrote:
> It's been a loooong time since I posted v1 of this series, but thanks
> to Thomas' poking, and even volunteering to help move v2 along, I've
> finally picked it back up.
>
> v2:
> Besides rebasing on latest master, v2 addresses all of David's comments
> - assembler cleanup
> - jump into the RTAS blob we get from DT, instead of reproducing it
> - don't store the RTAS root node, always hunt it down
>
> v2 didn't address debug-exit, and we still need a solution for that.
> Plugging chr-testdev into an spapr vty is probably what we should
> investigate first (as was suggested by Alex Graf under the v1 review).
> For this v2 I just kept the hack from v1, but simplified it and
> explicitly call it out as the hack that it is.
>
> Additional known issues:
> Latest F22 cross-compiler (gcc5 based) doesn't generate working
> code with this series. I didn't try to debug. The 4.9 based compiler
> I initially used on v1 works, so I reverted to that one.
>
> Testing:
> I only tested with qemu-system-ppc64 (latest) on x86_64 so far. I'll
> try to get a machine to test with real hardware (and KVM) unless
> someone (hi Thomas :-) beats me to it.
I've tested the series from the branch initial-drop-v2:
- On RHEL 7.2 ppc64 (ppc64le is not supported ?), POWER8 + kvm_hv.
I have (sometime) an error:
./powerpc/run: line 60: exit: too many arguments
PASS selftest-setup
Which is in fact:
/usr/libexec/qemu-kvm -machine pseries,accel=kvm -bios
powerpc/boot_rom.bin -display none -serial stdio -kernel
powerpc/selftest.elf -smp 2 -m 256 -append setup smp=2 mem=256
PASS: selftest: setup: smp: nr_cpus = 2
PASS: selftest: setup: mem: size = 256 MB
SUMMARY: 2 tests, 0 unexpected failures
EXIT: STATUS=1
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=127
RTAS power-off returned 0
lib/powerpc/rtas.c:119: assert failed
EXIT: STATUS=12
Return value from qemu: 1 127 127 127 127 127 127 127 127 127 127 127 12
./powerpc/run: line 60: exit: too many arguments
- On fedora 23 on PowerMac G5 (ppc64) kvm_pr, it doesn't work at all:
lib/powerpc/setup.c:60: assert failed
59 assert(freemem_start >= mem_start && freemem_start < mem_end);
The values I have are:
freemem_start 434000 mem_start 8000000 mem_end 10000000
>
> Standard cover-letter summary:
> This series brings basic setup; starts a test's C entry point, main(),
> and printf, exit, and malloc work. Three more series should follow this
> one which must bring; vector support, mmu support, and smp support, at
> which point I believe the framework could just evolve with the creation
> of unit tests.
>
> Patches also available here
> https://github.com/rhdrjones/kvm-unit-tests/commits/ppc64/initial-drop-v2
>
>
> Andrew Jones (14):
> lib: asm-generic: add missing casts
> lib: share arm-selftest utility functions
> config: no need to mix arch makefiles
> powerpc/ppc64: start skeleton framework
> powerpc/pp64: ppc-ify makefiles and linker script
> powerpc/ppc64: add boot rom source
> powerpc/ppc64: add bootloader to bounce into memory
> powerpc/ppc64: add HV putchar
> powerpc/ppc64: adapt arm's setup
> powerpc/ppc64: relocate linker VMAs
> powerpc/ppc64: add run script and unittests.cfg
> mkstandalone: add support for powerpc
> powerpc/ppc64: add RTAS support
> powerpc/ppc64: HACK: make a fake debug-exit
>
> Makefile | 2 +-
> README | 3 +-
> arm/Makefile | 1 +
> config/config-arm.mak => arm/Makefile.arm | 2 +-
> config/config-arm64.mak => arm/Makefile.arm64 | 2 +-
> .../config-arm-common.mak => arm/Makefile.common | 3 +-
> arm/selftest.c | 45 +++-----
> configure | 6 ++
> lib/asm-generic/io.h | 12 +--
> lib/libcflat.h | 11 +-
> lib/powerpc/.gitignore | 1 +
> lib/powerpc/asm/rtas.h | 26 +++++
> lib/powerpc/asm/setup.h | 27 +++++
> lib/powerpc/io.c | 37 +++++++
> lib/powerpc/mmu.c | 0
> lib/powerpc/rtas.c | 120 +++++++++++++++++++++
> lib/powerpc/setup.c | 91 ++++++++++++++++
> lib/powerpc/smp.c | 0
> lib/ppc64/.gitignore | 1 +
> lib/ppc64/asm-offsets.c | 12 +++
> lib/ppc64/asm/asm-offsets.h | 1 +
> lib/ppc64/asm/io.h | 5 +
> lib/ppc64/asm/page.h | 1 +
> lib/ppc64/asm/rtas.h | 1 +
> lib/ppc64/asm/setup.h | 1 +
> lib/ppc64/asm/spinlock.h | 11 ++
> lib/ppc64/processor.c | 0
> lib/ppc64/spinlock.c | 11 ++
> lib/report.c | 16 +++
> lib/util.c | 18 ++++
> lib/util.h | 23 ++++
> powerpc/Makefile | 1 +
> powerpc/Makefile.common | 65 +++++++++++
> powerpc/Makefile.ppc64 | 21 ++++
> powerpc/boot_rom.bin | Bin 0 -> 280 bytes
> powerpc/cstart64.S | 86 +++++++++++++++
> powerpc/flat.lds | 44 ++++++++
> powerpc/reloc64.c | 55 ++++++++++
> powerpc/rom/.gitignore | 1 +
> powerpc/rom/Makefile | 36 +++++++
> powerpc/rom/header.img | 1 +
> powerpc/rom/rom.ffs | 4 +
> powerpc/rom/stage1.S | 5 +
> powerpc/run | 60 +++++++++++
> powerpc/selftest.c | 65 +++++++++++
> powerpc/unittests.cfg | 30 ++++++
> {config => scripts}/asm-offsets.mak | 0
> scripts/mkstandalone.sh | 5 +
> x86/Makefile | 1 +
> .../config-x86-common.mak => x86/Makefile.common | 0
> config/config-i386.mak => x86/Makefile.i386 | 2 +-
> config/config-x86_64.mak => x86/Makefile.x86_64 | 2 +-
> 52 files changed, 924 insertions(+), 50 deletions(-)
> create mode 100644 arm/Makefile
> rename config/config-arm.mak => arm/Makefile.arm (90%)
> rename config/config-arm64.mak => arm/Makefile.arm64 (89%)
> rename config/config-arm-common.mak => arm/Makefile.common (96%)
> create mode 100644 lib/powerpc/.gitignore
> create mode 100644 lib/powerpc/asm/rtas.h
> create mode 100644 lib/powerpc/asm/setup.h
> create mode 100644 lib/powerpc/io.c
> create mode 100644 lib/powerpc/mmu.c
> create mode 100644 lib/powerpc/rtas.c
> create mode 100644 lib/powerpc/setup.c
> create mode 100644 lib/powerpc/smp.c
> create mode 100644 lib/ppc64/.gitignore
> create mode 100644 lib/ppc64/asm-offsets.c
> create mode 100644 lib/ppc64/asm/asm-offsets.h
> create mode 100644 lib/ppc64/asm/io.h
> create mode 100644 lib/ppc64/asm/page.h
> create mode 100644 lib/ppc64/asm/rtas.h
> create mode 100644 lib/ppc64/asm/setup.h
> create mode 100644 lib/ppc64/asm/spinlock.h
> create mode 100644 lib/ppc64/processor.c
> create mode 100644 lib/ppc64/spinlock.c
> create mode 100644 lib/util.c
> create mode 100644 lib/util.h
> create mode 100644 powerpc/Makefile
> create mode 100644 powerpc/Makefile.common
> create mode 100644 powerpc/Makefile.ppc64
> create mode 100644 powerpc/boot_rom.bin
> create mode 100644 powerpc/cstart64.S
> create mode 100644 powerpc/flat.lds
> create mode 100644 powerpc/reloc64.c
> create mode 100644 powerpc/rom/.gitignore
> create mode 100644 powerpc/rom/Makefile
> create mode 100644 powerpc/rom/header.img
> create mode 100644 powerpc/rom/rom.ffs
> create mode 100644 powerpc/rom/stage1.S
> create mode 100755 powerpc/run
> create mode 100644 powerpc/selftest.c
> create mode 100644 powerpc/unittests.cfg
> rename {config => scripts}/asm-offsets.mak (100%)
> create mode 100644 x86/Makefile
> rename config/config-x86-common.mak => x86/Makefile.common (100%)
> rename config/config-i386.mak => x86/Makefile.i386 (91%)
> rename config/config-x86_64.mak => x86/Makefile.x86_64 (93%)
>
next prev parent reply other threads:[~2016-02-11 13:36 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 18:53 [kvm-unit-tests PATCH v2 00/14] ppc64: initial drop Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 01/14] lib: asm-generic: add missing casts Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 12:05 ` Thomas Huth
2016-02-12 12:05 ` Thomas Huth
2016-02-12 13:58 ` Andrew Jones
2016-02-12 13:58 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 02/14] lib: share arm-selftest utility functions Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 12:40 ` Thomas Huth
2016-02-12 12:40 ` Thomas Huth
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 03/14] config: no need to mix arch makefiles Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 04/14] powerpc/ppc64: start skeleton framework Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 05/14] powerpc/pp64: ppc-ify makefiles and linker script Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-09 17:54 ` [kvm-unit-tests PATCH] align toc to 256 bytes Andrew Jones
2016-02-09 17:54 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 06/14] powerpc/ppc64: add boot rom source Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 6:27 ` Thomas Huth
2016-02-12 6:27 ` Thomas Huth
2016-02-12 10:07 ` Andrew Jones
2016-02-12 10:07 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 07/14] powerpc/ppc64: add bootloader to bounce into memory Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 08/14] powerpc/ppc64: add HV putchar Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 17:08 ` Thomas Huth
2016-02-12 17:08 ` Thomas Huth
2016-02-12 17:45 ` Thomas Huth
2016-02-12 17:45 ` Thomas Huth
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 09/14] powerpc/ppc64: adapt arm's setup Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 11:50 ` Thomas Huth
2016-02-12 11:50 ` Thomas Huth
2016-02-12 13:59 ` Andrew Jones
2016-02-12 13:59 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 10/14] powerpc/ppc64: relocate linker VMAs Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 11/14] powerpc/ppc64: add run script and unittests.cfg Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 12/14] mkstandalone: add support for powerpc Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 13/14] powerpc/ppc64: add RTAS support Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 17:51 ` Thomas Huth
2016-02-12 17:51 ` Thomas Huth
2016-02-08 18:53 ` [kvm-unit-tests PATCH v2 14/14] powerpc/ppc64: HACK: make a fake debug-exit Andrew Jones
2016-02-08 18:53 ` Andrew Jones
2016-02-12 18:07 ` Thomas Huth
2016-02-12 18:07 ` Thomas Huth
2016-02-12 22:50 ` Paolo Bonzini
2016-02-12 22:50 ` Paolo Bonzini
2016-02-09 17:49 ` [kvm-unit-tests PATCH v2 00/14] ppc64: initial drop Andrew Jones
2016-02-09 17:49 ` Andrew Jones
2016-02-10 14:27 ` Paolo Bonzini
2016-02-10 14:27 ` Paolo Bonzini
2016-02-11 11:56 ` Andrew Jones
2016-02-11 11:56 ` Andrew Jones
2016-02-11 12:36 ` Paolo Bonzini
2016-02-11 12:36 ` Paolo Bonzini
2016-02-11 13:36 ` Laurent Vivier [this message]
2016-02-11 13:36 ` Laurent Vivier
2016-02-11 15:29 ` Andrew Jones
2016-02-11 15:29 ` Andrew Jones
2016-02-11 16:44 ` Laurent Vivier
2016-02-11 16:44 ` Laurent Vivier
2016-02-11 17:22 ` Andrew Jones
2016-02-11 17:22 ` Andrew Jones
2016-02-11 17:47 ` Laurent Vivier
2016-02-11 17:47 ` Laurent Vivier
2016-02-12 10:06 ` Andrew Jones
2016-02-12 10:06 ` Andrew Jones
2016-02-12 10:31 ` Laurent Vivier
2016-02-12 10:31 ` Laurent Vivier
2016-02-12 10:57 ` Andrew Jones
2016-02-12 10:57 ` Andrew Jones
2016-02-12 13:44 ` Andrew Jones
2016-02-12 13:44 ` Andrew Jones
2016-02-14 22:43 ` David Gibson
2016-02-14 22:43 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BC8E79.7050409@redhat.com \
--to=lvivier@redhat.com \
--cc=agraf@suse.de \
--cc=david@gibson.dropbear.id.au \
--cc=dgibson@redhat.com \
--cc=drjones@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.