From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP
Date: Thu, 11 Feb 2016 12:01:53 -0800 [thread overview]
Message-ID: <56BCE8B1.2060900@gmail.com> (raw)
In-Reply-To: <1449249162-16850-1-git-send-email-yrdreddy@broadcom.com>
On 04/12/15 09:12, Yendapally Reddy Dhananjaya Reddy wrote:
> This enables the GPIO-a support for Broadcom NSP SoC
>
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yrdreddy@broadcom.com>
Finally applied to devicetree/next, since there was a bit of
restructuring with the addition of the ranges, please verify the results
look correct here:
https://github.com/Broadcom/stblinux/commit/018e4feb7584971b3dbda6daa6a8fef310cafbcb
> ---
> arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> index 58aca27..148d79e 100644
> --- a/arch/arm/boot/dts/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -116,4 +116,16 @@
> status = "disabled";
> };
> };
> +
> + gpioa: gpio at 18000020 {
> + compatible = "brcm,nsp-gpio-a";
> + reg = <0x18000020 0x70>,
> + <0x1803f1c4 0x1c>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + ngpios = <32>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + };
> };
>
--
Florian
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: Yendapally Reddy Dhananjaya Reddy <yrdreddy@broadcom.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP
Date: Thu, 11 Feb 2016 12:01:53 -0800 [thread overview]
Message-ID: <56BCE8B1.2060900@gmail.com> (raw)
In-Reply-To: <1449249162-16850-1-git-send-email-yrdreddy@broadcom.com>
On 04/12/15 09:12, Yendapally Reddy Dhananjaya Reddy wrote:
> This enables the GPIO-a support for Broadcom NSP SoC
>
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yrdreddy@broadcom.com>
Finally applied to devicetree/next, since there was a bit of
restructuring with the addition of the ranges, please verify the results
look correct here:
https://github.com/Broadcom/stblinux/commit/018e4feb7584971b3dbda6daa6a8fef310cafbcb
> ---
> arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> index 58aca27..148d79e 100644
> --- a/arch/arm/boot/dts/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -116,4 +116,16 @@
> status = "disabled";
> };
> };
> +
> + gpioa: gpio@18000020 {
> + compatible = "brcm,nsp-gpio-a";
> + reg = <0x18000020 0x70>,
> + <0x1803f1c4 0x1c>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + ngpios = <32>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + };
> };
>
--
Florian
next prev parent reply other threads:[~2016-02-11 20:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 17:12 [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP Yendapally Reddy Dhananjaya Reddy
2015-12-04 17:12 ` Yendapally Reddy Dhananjaya Reddy
2015-12-04 17:12 ` Yendapally Reddy Dhananjaya Reddy
2015-12-10 17:46 ` Linus Walleij
2015-12-10 17:46 ` Linus Walleij
2015-12-10 17:46 ` Linus Walleij
2015-12-11 0:33 ` Florian Fainelli
2015-12-11 0:33 ` Florian Fainelli
2015-12-11 0:33 ` Florian Fainelli
2016-02-11 20:01 ` Florian Fainelli [this message]
2016-02-11 20:01 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BCE8B1.2060900@gmail.com \
--to=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.