4.5-rc iser issues

4.5-rc iser issues

[Christoph Hellwig]

iSER on 4.5-rc3 seems to fall over pretty quickly for me.  The
test is a a single LUN, against a Linux iSER target, also running
4.5-rc.  Both are usinx mlx4 hardware.  These messages appear
immediately when running xfstests on xfs (but not during mkfs.xfs),
and after a few dozend tests with ext4, and ultimiately lock up the
system:

Feb 13 13:33:57 redstar37 kernel: [  566.871038] iser: iser_fast_reg_fmr: ib_fmr_pool_map_phys failed: -22
Feb 13 13:33:57 redstar37 kernel: [  566.878278] iser: iser_prepare_read_cmd: Failed to set up Data-IN RDMA
Feb 13 13:33:57 redstar37 kernel: [  566.885604] iser: iser_send_command: conn ffff8809261bbb28 failed task->itt 5 err -22
Feb 13 13:33:57 redstar37 kernel: [  566.899804] iser: iser_fast_reg_fmr: ib_fmr_pool_map_phys failed: -22
Feb 13 13:33:57 redstar37 kernel: [  566.907037] iser: iser_prepare_read_cmd: Failed to set up Data-IN RDMA
Feb 13 13:33:57 redstar37 kernel: [  566.914355] iser: iser_send_command: conn ffff8809261bbb28 failed task->itt 6 err -22

When hacking the initiator to use FRs instead of FMRs I get something
fairly similar:

Feb 13 22:49:18 redstar37 kernel: [  277.500477] iser: iser_fast_reg_mr: failed to map sg (5/6)
Feb 13 22:49:18 redstar37 kernel: [  277.506679] iser: iser_prepare_write_cmd: Failed to register write cmd RDMA mem
Feb 13 22:49:18 redstar37 kernel: [  277.514906] iser: iser_send_command: conn ffff88091ac8cb28 failed task->itt 59 err -22
Feb 13 22:49:18 redstar37 kernel: [  277.529614] iser: iser_fast_reg_mr: failed to map sg (5/6)
Feb 13 22:49:18 redstar37 kernel: [  277.535785] iser: iser_prepare_write_cmd: Failed to register write cmd RDMA mem
Feb 13 22:49:18 redstar37 kernel: [  277.544006] iser: iser_send_command: conn ffff88091ac8cb28 failed task->itt 29 err -22
Feb 13 22:49:18 redstar37 kernel: [  277.558669] iser: iser_fast_reg_mr: failed to map sg (5/6)
Feb 13 22:49:18 redstar37 kernel: [  277.564844] iser: iser_prepare_write_cmd: Failed to register write cmd RDMA mem
Feb 13 22:49:18 redstar37 kernel: [  277.573069] iser: iser_send_command: conn ffff88091ac8cb28 failed task->itt 78 err -22
Feb 13 22:49:18 redstar37 kernel: [  277.587677] iser: iser_fast_reg_mr: failed to map sg (5/6)

The only other kernel version I had available quickly is 3.16 from Debian
Jessie, and that works fine.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: 4.5-rc iser issues

[Sagi Grimberg]

> iSER on 4.5-rc3 seems to fall over pretty quickly for me.  The
> test is a a single LUN, against a Linux iSER target, also running
> 4.5-rc.  Both are usinx mlx4 hardware.  These messages appear
> immediately when running xfstests on xfs (but not during mkfs.xfs),
> and after a few dozend tests with ext4, and ultimiately lock up the
> system:
>
> Feb 13 13:33:57 redstar37 kernel: [  566.871038] iser: iser_fast_reg_fmr: ib_fmr_pool_map_phys failed: -22
> Feb 13 13:33:57 redstar37 kernel: [  566.878278] iser: iser_prepare_read_cmd: Failed to set up Data-IN RDMA
> Feb 13 13:33:57 redstar37 kernel: [  566.885604] iser: iser_send_command: conn ffff8809261bbb28 failed task->itt 5 err -22
> Feb 13 13:33:57 redstar37 kernel: [  566.899804] iser: iser_fast_reg_fmr: ib_fmr_pool_map_phys failed: -22
> Feb 13 13:33:57 redstar37 kernel: [  566.907037] iser: iser_prepare_read_cmd: Failed to set up Data-IN RDMA
> Feb 13 13:33:57 redstar37 kernel: [  566.914355] iser: iser_send_command: conn ffff8809261bbb28 failed task->itt 6 err -22
>
> When hacking the initiator to use FRs instead of FMRs I get something
> fairly similar:
>
> Feb 13 22:49:18 redstar37 kernel: [  277.500477] iser: iser_fast_reg_mr: failed to map sg (5/6)
> Feb 13 22:49:18 redstar37 kernel: [  277.506679] iser: iser_prepare_write_cmd: Failed to register write cmd RDMA mem
> Feb 13 22:49:18 redstar37 kernel: [  277.514906] iser: iser_send_command: conn ffff88091ac8cb28 failed task->itt 59 err -22
> Feb 13 22:49:18 redstar37 kernel: [  277.529614] iser: iser_fast_reg_mr: failed to map sg (5/6)
> Feb 13 22:49:18 redstar37 kernel: [  277.535785] iser: iser_prepare_write_cmd: Failed to register write cmd RDMA mem
> Feb 13 22:49:18 redstar37 kernel: [  277.544006] iser: iser_send_command: conn ffff88091ac8cb28 failed task->itt 29 err -22
> Feb 13 22:49:18 redstar37 kernel: [  277.558669] iser: iser_fast_reg_mr: failed to map sg (5/6)
> Feb 13 22:49:18 redstar37 kernel: [  277.564844] iser: iser_prepare_write_cmd: Failed to register write cmd RDMA mem
> Feb 13 22:49:18 redstar37 kernel: [  277.573069] iser: iser_send_command: conn ffff88091ac8cb28 failed task->itt 78 err -22
> Feb 13 22:49:18 redstar37 kernel: [  277.587677] iser: iser_fast_reg_mr: failed to map sg (5/6)
>
> The only other kernel version I had available quickly is 3.16 from Debian
> Jessie, and that works fine.

Thanks for reporting, I'll have a look.

I suspect this is coming from Keith+Ming changes in
blk_bio_segment_split()...
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Sagi Grimberg]

>> The only other kernel version I had available quickly is 3.16 from Debian
>> Jessie, and that works fine.
>
> Thanks for reporting, I'll have a look.
>
> I suspect this is coming from Keith+Ming changes in
> blk_bio_segment_split()...

OK,

I can clearly see that the block layer commitment to respect the
driver virtual boundary was broken in 4.5.

 From the log:
iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
iser: sg[3] dma_addr:0x8621EA000 off:0x0 sz:0x200 dma_len:0x200 ...
iser: sg[4] dma_addr:0x8621EB000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[5] dma_addr:0x860384000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[6] dma_addr:0x860385000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[7] dma_addr:0x860316000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[8] dma_addr:0x860317000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[9] dma_addr:0x860294000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[10] dma_addr:0x860295000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[11] dma_addr:0x8609F8000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[12] dma_addr:0x8609F9000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[13] dma_addr:0x8607DA000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[14] dma_addr:0x8607DB000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[15] dma_addr:0x8607D4000 off:0x0 sz:0x200 dma_len:0x200
--

While iser sets the virtual boundary to be 4096, we can
clearly see that each of the SG elements contain a gap
and should not ever see those...

I'm bisecting now, there are a couple of patches from Ming in
the area of the bio splitting code...

CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
wrt the virtual boundary so I think nvme will break as well.

Attaching a small test program I used to force gappy I/O.

$ ./scatter_data -l 64k -n 128 -d <dev>
-------------- next part --------------
/**
 * Scattered IO test
 *
 * Author: Adir Lev
 **/
#define _GNU_SOURCE

#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <malloc.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <errno.h>
#include <string.h>
#include <getopt.h>
#include <sys/uio.h>
#include <sys/time.h>
#include <assert.h>


#define MAX_SGE 128

int do_write = 0;
int count = 1;
int num_sge = 0;
int bs = 0;
char *dev;
size_t page_size;
void *ibuf;
void *obuf;
long disk_sz = 0;


double time_diff(struct timeval x , struct timeval y) {
	double x_ms , y_ms , diff;
	x_ms = (double)x.tv_sec*1000000 + (double)x.tv_usec;
	y_ms = (double)y.tv_sec*1000000 + (double)y.tv_usec;
	diff = (double)y_ms - (double)x_ms;
	return diff;
}

void print_usage(char* cmd) {
	printf("USAGE: %s -l 1024 -n 2 -d /dev/sdb [-C 1000]\n", cmd);
	printf("\t-l bs in KBytes\n");
	printf("\t-n num of sges to use\n");
	printf("\t-d block device\n");
	printf("\t[-C] num of iterations\n");
}

int open_block_dev() {
	FILE *fp;
	int fd, rc;
	long sz;

	printf("Device: %s\n", dev);
	fd = open(dev, O_RDWR|O_DIRECT|O_SYNC, 777);
	if (fd < 0) {
		perror("Unable to open block device");
		return fd;
	}

	fp = fdopen(fd, "w+");
	if (!fp) {
		printf("failed to fdopen, errno=%d\n", errno);
		return -1;
	}

	rc = fseek(fp, 0, SEEK_END);
	if (rc < 0) {
		printf("failed to fseek, errno=%d\n", errno);
		return -1;
	}

	disk_sz = ftell(fp);
	if (disk_sz < 0) {
		printf("failed to ftell, errno=%d\n", errno);
		return -1;
	}

	rewind(fp);

	return fd;
}

int my_rewind(fd) {
	FILE *fp;

	fp = fdopen(fd, "w+");
	if (!fp) {
		printf("failed to fdopen, errno=%d\n", errno);
		return -1;
	}
	rewind(fp);
	return 0;
}

int parse_args(int argc, char **argv) {
	int option = 0;

	while ((option = getopt(argc, argv,"wC:l:n:d:")) != -1) {
		switch (option) {
			case 'w':
				do_write = 1;
				break;
			case 'C':
				count = atoi(optarg);
				break;
			case 'd':
				dev = optarg;
				break;
			case 'l':
				bs = atoi(optarg);
				break;
			case 'n':
				num_sge = atoi(optarg);
				break;
			default:
				print_usage(argv[0]);
				return -1;
		}
	}

	/* sanity check args */
	if (optind < 4) {
		printf("Mandatory argument(s) missing\n");
		print_usage(argv[0]);
		return -1;
	}

	if (bs == 512) {
		printf("ERROR: Block size must exceed 512Bytes \n");
		return -1;
	}
	bs = bs * 1024;
	if (num_sge > MAX_SGE) {
		printf("ERROR: num_sge (-n) cannot exceed 128\n");
		return -1;
	}

	if (bs % 512 != 0) {
		printf("ERROR: Block size must be multiple of 512\n");
		return -1;
	}

	if ((bs / num_sge) % 512 != 0) {
		printf("ERROR: Block size/num_sge must be multiple of 512\n");
		return -1;
	}

	if (bs > (page_size * 128)) {
		printf("ERROR: Block size cannot exceed 524288 Bytes (4096B * 128)\n");
		return -1;
	}

	if (count < 1) {
		printf("ERROR: count needs to be higher than 0\n");
		return -1;
	}

	return 0;
}

void* alloc_sges()
{
	void *buf;
	int sge_size = bs / num_sge;

	if (sge_size > page_size) {
		printf("ERROR: sge size cannot exceed page size\n");
		return NULL;
	}

	buf = memalign(page_size, num_sge * page_size);
	if (!buf)
		perror( "ERROR: cannot allocate memory");

	memset(buf, 0, num_sge * page_size);

	return buf;
}

int sample_counter() {
	FILE *fp;
	int val;

	system("iscsiadm -m session -s | grep fmr_un | awk '{print $2}'"
	       " | awk '{ sum+=$1} END {print sum}' >> /tmp/indir_counter");

	fp = fopen("/tmp/indir_counter", "rw");
	if (!fp) {
		perror("Unable to open counter file");
		return -1;
	}

	fscanf(fp, "%d", &val);

	if (val < 0) {
		printf("Failed to get fmr_unaligned counter\n");
		return -1;
	}

	fclose(fp);
	unlink("/tmp/indir_counter");
	return val;
}

void get_stats(struct timeval t_before, struct timeval t_after) {
	double t_diff;
	float iops;
	long bw;

	t_diff = time_diff(t_before, t_after);
	iops = (float)count / t_diff * 1000;
	bw = iops * bs;

	printf("time elapsed in sec %f\n", t_diff/1000000);
	printf("iops: %.2fkiops\n", iops);
	printf("BW: %ldKB\n", bw);
}

int calc_counter(int before, int after) {
	int total = 0;

	total = after - before;
	if (total != count * 2) {
		printf("count: %d, fmr_unaligned_cntr: %d\n", count, total);
		return -1;
	} else {
		return 0;
	}
}

static void dump_bufs(void *s1, void *s2, int len)
{
	int i;

	for (i = 0; i < len; i += 8) {
		uint64_t idword = *(uint64_t *)&(((char *)s2)[i]);
		uint64_t odword = *(uint64_t *)&(((char *)s1)[i]);

		printf("obuf[%x]: %x,		ibuf[%x]: %x\n",
			i, odword, i, idword);
	}
}

static int run_rw(int is_write, int fd, void *buf)
{
	struct iovec iov[num_sge];
	int sge_size = bs / num_sge;
	int max = page_size - sge_size;
	int i = 0, j = 0, offset = 0, rc = 0;
	ssize_t bytes_read;
	long bytes_left = disk_sz;

	/* for every iteration */
	for (i = 0; i < count; i++) {
		if (max > 0)
			offset = (512 * i) % max;
		if (bytes_left < bs) {
			rc = my_rewind(fd);
			if (rc < 0)
				return rc;
			printf("count: %d, no space left on block "
			       "device, rewinding\n", i);
			bytes_left = disk_sz;
		}
		/* for every sge */
		for (j = 0; j < num_sge; j++) {
			/* change offset in page */
			iov[j].iov_base = buf + (page_size * j) + offset;
			iov[j].iov_len = sge_size;
			if (is_write)
				memset(iov[j].iov_base, i+j, iov[j].iov_len);
		}

		if (is_write) {
			bytes_read = writev(fd, iov, num_sge);
			if (bytes_read < bs) {
				if (bytes_read < 0) {
					printf("failed to writev, bytes=%d, "
						"errno=%d\n", bytes_read, errno);
					perror("failed to writev");
				} else
					printf("writev less than expected. "
						"Bytes=%d, expected %d\n", bytes_read, bs);
				return -1;
			}
		} else {
			bytes_read = readv(fd, iov, num_sge);
			if (bytes_read < bs) {
				if (bytes_read < 0) {
					printf("failed to readv, bytes=%d, "
						"errno=%d\n", bytes_read, errno);
					perror("failed to readv");
				} else
					printf("readv less than expected. "
						"Bytes=%d, expected %d\n", bytes_read, bs);
				return -1;
			}
		}
		bytes_left -= bs;
	}

	return 0;
}

int run_iovec_traffic(int fd)
{
	int rc;

	rc = my_rewind(fd);
	if (rc) {
		printf("rewind failed\n");
		return -1;
	}

	rc = run_rw(1, fd, obuf);
	if (rc) {
		printf("write failed\n");
		return -1;
	}

	rc = my_rewind(fd);
	if (rc) {
		printf("rewind failed\n");
		return -1;
	}

	rc = run_rw(0, fd, ibuf);
	if (rc) {
		printf("read failed\n");
		return -1;
	}

	rc = memcmp(ibuf, obuf, bs);
	if (rc) {
		printf("memcmp failed\n");
		dump_bufs(obuf, ibuf, bs);
		return -1;
	}

	return rc;
}

int main(int argc, char **argv) {
	struct timeval t_before, t_after;
	void **page_list = NULL;
	int fd, before_counter = 0, after_counter = 0, rc = 0;

	page_size = sysconf(_SC_PAGESIZE);
	rc = parse_args(argc, argv);
	if (rc)
		return -1;

	fd = open_block_dev();
	if (fd < 0)
		return -1;

	ibuf = alloc_sges();
	if (!ibuf) {
		rc = -ENOMEM;
		goto out;
	}

	obuf = alloc_sges();
	if (!obuf) {
		rc = -ENOMEM;
		goto out;
	}

	before_counter = sample_counter();
	if (before_counter < 0) {
		rc = -1;
		goto out;
	}

	gettimeofday(&t_before, NULL);
	rc = run_iovec_traffic(fd);
	gettimeofday(&t_after, NULL);

	if (rc) {
		printf("Exiting with rc=%d\n", rc);
		goto out;
	}

	get_stats(t_before, t_after);

	after_counter = sample_counter();
	if (after_counter < 0) {
		rc = -1;
		goto out;
	}

	rc = calc_counter(before_counter, after_counter);
	if (rc) {
		printf("Test Failed unaligned count\n");
		goto out;
	}

	printf("Test Passes\n");
out:
	close(fd);
	free (ibuf);
	free (obuf);

	return rc;
}

Re: 4.5-rc iser issues

[Sagi Grimberg]

[-- Attachment #1: Type: text/plain, Size: 1899 bytes --]


>> The only other kernel version I had available quickly is 3.16 from Debian
>> Jessie, and that works fine.
>
> Thanks for reporting, I'll have a look.
>
> I suspect this is coming from Keith+Ming changes in
> blk_bio_segment_split()...

OK,

I can clearly see that the block layer commitment to respect the
driver virtual boundary was broken in 4.5.

 From the log:
iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
iser: sg[3] dma_addr:0x8621EA000 off:0x0 sz:0x200 dma_len:0x200 ...
iser: sg[4] dma_addr:0x8621EB000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[5] dma_addr:0x860384000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[6] dma_addr:0x860385000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[7] dma_addr:0x860316000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[8] dma_addr:0x860317000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[9] dma_addr:0x860294000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[10] dma_addr:0x860295000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[11] dma_addr:0x8609F8000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[12] dma_addr:0x8609F9000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[13] dma_addr:0x8607DA000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[14] dma_addr:0x8607DB000 off:0x0 sz:0x200 dma_len:0x200
iser: sg[15] dma_addr:0x8607D4000 off:0x0 sz:0x200 dma_len:0x200
--

While iser sets the virtual boundary to be 4096, we can
clearly see that each of the SG elements contain a gap
and should not ever see those...

I'm bisecting now, there are a couple of patches from Ming in
the area of the bio splitting code...

CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
wrt the virtual boundary so I think nvme will break as well.

Attaching a small test program I used to force gappy I/O.

$ ./scatter_data -l 64k -n 128 -d <dev>

[-- Attachment #2: scattered_data.c --]
[-- Type: text/plain, Size: 7535 bytes --]

/**
 * Scattered IO test
 *
 * Author: Adir Lev
 **/
#define _GNU_SOURCE

#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <malloc.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <errno.h>
#include <string.h>
#include <getopt.h>
#include <sys/uio.h>
#include <sys/time.h>
#include <assert.h>


#define MAX_SGE 128

int do_write = 0;
int count = 1;
int num_sge = 0;
int bs = 0;
char *dev;
size_t page_size;
void *ibuf;
void *obuf;
long disk_sz = 0;


double time_diff(struct timeval x , struct timeval y) {
	double x_ms , y_ms , diff;
	x_ms = (double)x.tv_sec*1000000 + (double)x.tv_usec;
	y_ms = (double)y.tv_sec*1000000 + (double)y.tv_usec;
	diff = (double)y_ms - (double)x_ms;
	return diff;
}

void print_usage(char* cmd) {
	printf("USAGE: %s -l 1024 -n 2 -d /dev/sdb [-C 1000]\n", cmd);
	printf("\t-l bs in KBytes\n");
	printf("\t-n num of sges to use\n");
	printf("\t-d block device\n");
	printf("\t[-C] num of iterations\n");
}

int open_block_dev() {
	FILE *fp;
	int fd, rc;
	long sz;

	printf("Device: %s\n", dev);
	fd = open(dev, O_RDWR|O_DIRECT|O_SYNC, 777);
	if (fd < 0) {
		perror("Unable to open block device");
		return fd;
	}

	fp = fdopen(fd, "w+");
	if (!fp) {
		printf("failed to fdopen, errno=%d\n", errno);
		return -1;
	}

	rc = fseek(fp, 0, SEEK_END);
	if (rc < 0) {
		printf("failed to fseek, errno=%d\n", errno);
		return -1;
	}

	disk_sz = ftell(fp);
	if (disk_sz < 0) {
		printf("failed to ftell, errno=%d\n", errno);
		return -1;
	}

	rewind(fp);

	return fd;
}

int my_rewind(fd) {
	FILE *fp;

	fp = fdopen(fd, "w+");
	if (!fp) {
		printf("failed to fdopen, errno=%d\n", errno);
		return -1;
	}
	rewind(fp);
	return 0;
}

int parse_args(int argc, char **argv) {
	int option = 0;

	while ((option = getopt(argc, argv,"wC:l:n:d:")) != -1) {
		switch (option) {
			case 'w':
				do_write = 1;
				break;
			case 'C':
				count = atoi(optarg);
				break;
			case 'd':
				dev = optarg;
				break;
			case 'l':
				bs = atoi(optarg);
				break;
			case 'n':
				num_sge = atoi(optarg);
				break;
			default:
				print_usage(argv[0]);
				return -1;
		}
	}

	/* sanity check args */
	if (optind < 4) {
		printf("Mandatory argument(s) missing\n");
		print_usage(argv[0]);
		return -1;
	}

	if (bs == 512) {
		printf("ERROR: Block size must exceed 512Bytes \n");
		return -1;
	}
	bs = bs * 1024;
	if (num_sge > MAX_SGE) {
		printf("ERROR: num_sge (-n) cannot exceed 128\n");
		return -1;
	}

	if (bs % 512 != 0) {
		printf("ERROR: Block size must be multiple of 512\n");
		return -1;
	}

	if ((bs / num_sge) % 512 != 0) {
		printf("ERROR: Block size/num_sge must be multiple of 512\n");
		return -1;
	}

	if (bs > (page_size * 128)) {
		printf("ERROR: Block size cannot exceed 524288 Bytes (4096B * 128)\n");
		return -1;
	}

	if (count < 1) {
		printf("ERROR: count needs to be higher than 0\n");
		return -1;
	}

	return 0;
}

void* alloc_sges()
{
	void *buf;
	int sge_size = bs / num_sge;

	if (sge_size > page_size) {
		printf("ERROR: sge size cannot exceed page size\n");
		return NULL;
	}

	buf = memalign(page_size, num_sge * page_size);
	if (!buf)
		perror( "ERROR: cannot allocate memory");

	memset(buf, 0, num_sge * page_size);

	return buf;
}

int sample_counter() {
	FILE *fp;
	int val;

	system("iscsiadm -m session -s | grep fmr_un | awk '{print $2}'"
	       " | awk '{ sum+=$1} END {print sum}' >> /tmp/indir_counter");

	fp = fopen("/tmp/indir_counter", "rw");
	if (!fp) {
		perror("Unable to open counter file");
		return -1;
	}

	fscanf(fp, "%d", &val);

	if (val < 0) {
		printf("Failed to get fmr_unaligned counter\n");
		return -1;
	}

	fclose(fp);
	unlink("/tmp/indir_counter");
	return val;
}

void get_stats(struct timeval t_before, struct timeval t_after) {
	double t_diff;
	float iops;
	long bw;

	t_diff = time_diff(t_before, t_after);
	iops = (float)count / t_diff * 1000;
	bw = iops * bs;

	printf("time elapsed in sec %f\n", t_diff/1000000);
	printf("iops: %.2fkiops\n", iops);
	printf("BW: %ldKB\n", bw);
}

int calc_counter(int before, int after) {
	int total = 0;

	total = after - before;
	if (total != count * 2) {
		printf("count: %d, fmr_unaligned_cntr: %d\n", count, total);
		return -1;
	} else {
		return 0;
	}
}

static void dump_bufs(void *s1, void *s2, int len)
{
	int i;

	for (i = 0; i < len; i += 8) {
		uint64_t idword = *(uint64_t *)&(((char *)s2)[i]);
		uint64_t odword = *(uint64_t *)&(((char *)s1)[i]);

		printf("obuf[%x]: %x,		ibuf[%x]: %x\n",
			i, odword, i, idword);
	}
}

static int run_rw(int is_write, int fd, void *buf)
{
	struct iovec iov[num_sge];
	int sge_size = bs / num_sge;
	int max = page_size - sge_size;
	int i = 0, j = 0, offset = 0, rc = 0;
	ssize_t bytes_read;
	long bytes_left = disk_sz;

	/* for every iteration */
	for (i = 0; i < count; i++) {
		if (max > 0)
			offset = (512 * i) % max;
		if (bytes_left < bs) {
			rc = my_rewind(fd);
			if (rc < 0)
				return rc;
			printf("count: %d, no space left on block "
			       "device, rewinding\n", i);
			bytes_left = disk_sz;
		}
		/* for every sge */
		for (j = 0; j < num_sge; j++) {
			/* change offset in page */
			iov[j].iov_base = buf + (page_size * j) + offset;
			iov[j].iov_len = sge_size;
			if (is_write)
				memset(iov[j].iov_base, i+j, iov[j].iov_len);
		}

		if (is_write) {
			bytes_read = writev(fd, iov, num_sge);
			if (bytes_read < bs) {
				if (bytes_read < 0) {
					printf("failed to writev, bytes=%d, "
						"errno=%d\n", bytes_read, errno);
					perror("failed to writev");
				} else
					printf("writev less than expected. "
						"Bytes=%d, expected %d\n", bytes_read, bs);
				return -1;
			}
		} else {
			bytes_read = readv(fd, iov, num_sge);
			if (bytes_read < bs) {
				if (bytes_read < 0) {
					printf("failed to readv, bytes=%d, "
						"errno=%d\n", bytes_read, errno);
					perror("failed to readv");
				} else
					printf("readv less than expected. "
						"Bytes=%d, expected %d\n", bytes_read, bs);
				return -1;
			}
		}
		bytes_left -= bs;
	}

	return 0;
}

int run_iovec_traffic(int fd)
{
	int rc;

	rc = my_rewind(fd);
	if (rc) {
		printf("rewind failed\n");
		return -1;
	}

	rc = run_rw(1, fd, obuf);
	if (rc) {
		printf("write failed\n");
		return -1;
	}

	rc = my_rewind(fd);
	if (rc) {
		printf("rewind failed\n");
		return -1;
	}

	rc = run_rw(0, fd, ibuf);
	if (rc) {
		printf("read failed\n");
		return -1;
	}

	rc = memcmp(ibuf, obuf, bs);
	if (rc) {
		printf("memcmp failed\n");
		dump_bufs(obuf, ibuf, bs);
		return -1;
	}

	return rc;
}

int main(int argc, char **argv) {
	struct timeval t_before, t_after;
	void **page_list = NULL;
	int fd, before_counter = 0, after_counter = 0, rc = 0;

	page_size = sysconf(_SC_PAGESIZE);
	rc = parse_args(argc, argv);
	if (rc)
		return -1;

	fd = open_block_dev();
	if (fd < 0)
		return -1;

	ibuf = alloc_sges();
	if (!ibuf) {
		rc = -ENOMEM;
		goto out;
	}

	obuf = alloc_sges();
	if (!obuf) {
		rc = -ENOMEM;
		goto out;
	}

	before_counter = sample_counter();
	if (before_counter < 0) {
		rc = -1;
		goto out;
	}

	gettimeofday(&t_before, NULL);
	rc = run_iovec_traffic(fd);
	gettimeofday(&t_after, NULL);

	if (rc) {
		printf("Exiting with rc=%d\n", rc);
		goto out;
	}

	get_stats(t_before, t_after);

	after_counter = sample_counter();
	if (after_counter < 0) {
		rc = -1;
		goto out;
	}

	rc = calc_counter(before_counter, after_counter);
	if (rc) {
		printf("Test Failed unaligned count\n");
		goto out;
	}

	printf("Test Passes\n");
out:
	close(fd);
	free (ibuf);
	free (obuf);

	return rc;
}

4.5-rc iser issues

[Sagi Grimberg]

> I'm bisecting now, there are a couple of patches from Ming in
> the area of the bio splitting code...
>
> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
> wrt the virtual boundary so I think nvme will break as well.

Bisection reveals that this one is the culprit:

commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
Author: Ming Lei <ming.lei at canonical.com>
Date:   Thu Sep 17 09:58:38 2015 -0600

     block: blk-merge: fast-clone bio when splitting rw bios

     biovecs has become immutable since v3.13, so it isn't necessary
     to allocate biovecs for the new cloned bios, then we can save
     one extra biovecs allocation/copy, and the allocation is often
     not fixed-length and a bit more expensive.

     For example, if the 'max_sectors_kb' of null blk's queue is set
     as 16(32 sectors) via sysfs just for making more splits, this patch
     can increase throught about ~70% in the sequential read test over
     null_blk(direct io, bs: 1M).

     Cc: Christoph Hellwig <hch at infradead.org>
     Cc: Kent Overstreet <kent.overstreet at gmail.com>
     Cc: Ming Lin <ming.l at ssi.samsung.com>
     Cc: Dongsu Park <dpark at posteo.net>
     Signed-off-by: Ming Lei <ming.lei at canonical.com>

     This fixes a performance regression introduced by commit 54efd50bfd,
     and allows us to take full advantage of the fact that we have immutable
     bio_vecs. Hand applied, as it rejected violently with commit
     5014c311baa2.

     Signed-off-by: Jens Axboe <axboe at fb.com>
--

Re: 4.5-rc iser issues

[Sagi Grimberg]

> I'm bisecting now, there are a couple of patches from Ming in
> the area of the bio splitting code...
>
> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
> wrt the virtual boundary so I think nvme will break as well.

Bisection reveals that this one is the culprit:

commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
Author: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Date:   Thu Sep 17 09:58:38 2015 -0600

     block: blk-merge: fast-clone bio when splitting rw bios

     biovecs has become immutable since v3.13, so it isn't necessary
     to allocate biovecs for the new cloned bios, then we can save
     one extra biovecs allocation/copy, and the allocation is often
     not fixed-length and a bit more expensive.

     For example, if the 'max_sectors_kb' of null blk's queue is set
     as 16(32 sectors) via sysfs just for making more splits, this patch
     can increase throught about ~70% in the sequential read test over
     null_blk(direct io, bs: 1M).

     Cc: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
     Cc: Kent Overstreet <kent.overstreet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
     Cc: Ming Lin <ming.l-Vzezgt5dB6uUEJcrhfAQsw@public.gmane.org>
     Cc: Dongsu Park <dpark-VwIFZPTo/vqsTnJN9+BGXg@public.gmane.org>
     Signed-off-by: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>

     This fixes a performance regression introduced by commit 54efd50bfd,
     and allows us to take full advantage of the fact that we have immutable
     bio_vecs. Hand applied, as it rejected violently with commit
     5014c311baa2.

     Signed-off-by: Jens Axboe <axboe-b10kYP2dOMg@public.gmane.org>
--
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Sagi Grimberg]

>> I'm bisecting now, there are a couple of patches from Ming in
>> the area of the bio splitting code...
>>
>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>> wrt the virtual boundary so I think nvme will break as well.
>
> Bisection reveals that this one is the culprit:
>
> commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
> Author: Ming Lei <ming.lei at canonical.com>
> Date:   Thu Sep 17 09:58:38 2015 -0600
>
>      block: blk-merge: fast-clone bio when splitting rw bios
>
>      biovecs has become immutable since v3.13, so it isn't necessary
>      to allocate biovecs for the new cloned bios, then we can save
>      one extra biovecs allocation/copy, and the allocation is often
>      not fixed-length and a bit more expensive.
>
>      For example, if the 'max_sectors_kb' of null blk's queue is set
>      as 16(32 sectors) via sysfs just for making more splits, this patch
>      can increase throught about ~70% in the sequential read test over
>      null_blk(direct io, bs: 1M).
>
>      Cc: Christoph Hellwig <hch at infradead.org>
>      Cc: Kent Overstreet <kent.overstreet at gmail.com>
>      Cc: Ming Lin <ming.l at ssi.samsung.com>
>      Cc: Dongsu Park <dpark at posteo.net>
>      Signed-off-by: Ming Lei <ming.lei at canonical.com>
>
>      This fixes a performance regression introduced by commit 54efd50bfd,
>      and allows us to take full advantage of the fact that we have
> immutable
>      bio_vecs. Hand applied, as it rejected violently with commit
>      5014c311baa2.
>
>      Signed-off-by: Jens Axboe <axboe at fb.com>
> --

Looks like there is a problem with bio_clone_fast()

This change makes the problem go away:
--
diff --git a/block/bio.c b/block/bio.c
index dbabd48..5e93733 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1791,7 +1791,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
          * Discards need a mutable bio_vec to accommodate the payload
          * required by the DSM TRIM and UNMAP commands.
          */
-       if (bio->bi_rw & REQ_DISCARD)
+       if (1 || bio->bi_rw & REQ_DISCARD)
                 split = bio_clone_bioset(bio, gfp, bs);
         else
                 split = bio_clone_fast(bio, gfp, bs);
--

Any thoughts?

Re: 4.5-rc iser issues

[Sagi Grimberg]

>> I'm bisecting now, there are a couple of patches from Ming in
>> the area of the bio splitting code...
>>
>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>> wrt the virtual boundary so I think nvme will break as well.
>
> Bisection reveals that this one is the culprit:
>
> commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
> Author: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
> Date:   Thu Sep 17 09:58:38 2015 -0600
>
>      block: blk-merge: fast-clone bio when splitting rw bios
>
>      biovecs has become immutable since v3.13, so it isn't necessary
>      to allocate biovecs for the new cloned bios, then we can save
>      one extra biovecs allocation/copy, and the allocation is often
>      not fixed-length and a bit more expensive.
>
>      For example, if the 'max_sectors_kb' of null blk's queue is set
>      as 16(32 sectors) via sysfs just for making more splits, this patch
>      can increase throught about ~70% in the sequential read test over
>      null_blk(direct io, bs: 1M).
>
>      Cc: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
>      Cc: Kent Overstreet <kent.overstreet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>      Cc: Ming Lin <ming.l-Vzezgt5dB6uUEJcrhfAQsw@public.gmane.org>
>      Cc: Dongsu Park <dpark-VwIFZPTo/vqsTnJN9+BGXg@public.gmane.org>
>      Signed-off-by: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
>
>      This fixes a performance regression introduced by commit 54efd50bfd,
>      and allows us to take full advantage of the fact that we have
> immutable
>      bio_vecs. Hand applied, as it rejected violently with commit
>      5014c311baa2.
>
>      Signed-off-by: Jens Axboe <axboe-b10kYP2dOMg@public.gmane.org>
> --

Looks like there is a problem with bio_clone_fast()

This change makes the problem go away:
--
diff --git a/block/bio.c b/block/bio.c
index dbabd48..5e93733 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1791,7 +1791,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
          * Discards need a mutable bio_vec to accommodate the payload
          * required by the DSM TRIM and UNMAP commands.
          */
-       if (bio->bi_rw & REQ_DISCARD)
+       if (1 || bio->bi_rw & REQ_DISCARD)
                 split = bio_clone_bioset(bio, gfp, bs);
         else
                 split = bio_clone_fast(bio, gfp, bs);
--

Any thoughts?
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Christoph Hellwig]

Adding Ming to Cc.

But I don't think simply not cloning the biovecs is the right thing
to do in the end.  This must be something with the bvec iterators.

Full quote for Ming:

On Sun, Feb 14, 2016@04:02:18PM +0200, Sagi Grimberg wrote:
> 
> >>I'm bisecting now, there are a couple of patches from Ming in
> >>the area of the bio splitting code...
> >>
> >>CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
> >>wrt the virtual boundary so I think nvme will break as well.
> >
> >Bisection reveals that this one is the culprit:
> >
> >commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
> >Author: Ming Lei <ming.lei at canonical.com>
> >Date:   Thu Sep 17 09:58:38 2015 -0600
> >
> >     block: blk-merge: fast-clone bio when splitting rw bios
> >
> >     biovecs has become immutable since v3.13, so it isn't necessary
> >     to allocate biovecs for the new cloned bios, then we can save
> >     one extra biovecs allocation/copy, and the allocation is often
> >     not fixed-length and a bit more expensive.
> >
> >     For example, if the 'max_sectors_kb' of null blk's queue is set
> >     as 16(32 sectors) via sysfs just for making more splits, this patch
> >     can increase throught about ~70% in the sequential read test over
> >     null_blk(direct io, bs: 1M).
> >
> >     Cc: Christoph Hellwig <hch at infradead.org>
> >     Cc: Kent Overstreet <kent.overstreet at gmail.com>
> >     Cc: Ming Lin <ming.l at ssi.samsung.com>
> >     Cc: Dongsu Park <dpark at posteo.net>
> >     Signed-off-by: Ming Lei <ming.lei at canonical.com>
> >
> >     This fixes a performance regression introduced by commit 54efd50bfd,
> >     and allows us to take full advantage of the fact that we have
> >immutable
> >     bio_vecs. Hand applied, as it rejected violently with commit
> >     5014c311baa2.
> >
> >     Signed-off-by: Jens Axboe <axboe at fb.com>
> >--
> 
> Looks like there is a problem with bio_clone_fast()
> 
> This change makes the problem go away:
> --
> diff --git a/block/bio.c b/block/bio.c
> index dbabd48..5e93733 100644
> --- a/block/bio.c
> +++ b/block/bio.c
> @@ -1791,7 +1791,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
>          * Discards need a mutable bio_vec to accommodate the payload
>          * required by the DSM TRIM and UNMAP commands.
>          */
> -       if (bio->bi_rw & REQ_DISCARD)
> +       if (1 || bio->bi_rw & REQ_DISCARD)
>                 split = bio_clone_bioset(bio, gfp, bs);
>         else
>                 split = bio_clone_fast(bio, gfp, bs);
> --
> 
> Any thoughts?
---end quoted text---

Re: 4.5-rc iser issues

[Christoph Hellwig]

Adding Ming to Cc.

But I don't think simply not cloning the biovecs is the right thing
to do in the end.  This must be something with the bvec iterators.

Full quote for Ming:

On Sun, Feb 14, 2016 at 04:02:18PM +0200, Sagi Grimberg wrote:
> 
> >>I'm bisecting now, there are a couple of patches from Ming in
> >>the area of the bio splitting code...
> >>
> >>CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
> >>wrt the virtual boundary so I think nvme will break as well.
> >
> >Bisection reveals that this one is the culprit:
> >
> >commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
> >Author: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
> >Date:   Thu Sep 17 09:58:38 2015 -0600
> >
> >     block: blk-merge: fast-clone bio when splitting rw bios
> >
> >     biovecs has become immutable since v3.13, so it isn't necessary
> >     to allocate biovecs for the new cloned bios, then we can save
> >     one extra biovecs allocation/copy, and the allocation is often
> >     not fixed-length and a bit more expensive.
> >
> >     For example, if the 'max_sectors_kb' of null blk's queue is set
> >     as 16(32 sectors) via sysfs just for making more splits, this patch
> >     can increase throught about ~70% in the sequential read test over
> >     null_blk(direct io, bs: 1M).
> >
> >     Cc: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
> >     Cc: Kent Overstreet <kent.overstreet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >     Cc: Ming Lin <ming.l-Vzezgt5dB6uUEJcrhfAQsw@public.gmane.org>
> >     Cc: Dongsu Park <dpark-VwIFZPTo/vqsTnJN9+BGXg@public.gmane.org>
> >     Signed-off-by: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
> >
> >     This fixes a performance regression introduced by commit 54efd50bfd,
> >     and allows us to take full advantage of the fact that we have
> >immutable
> >     bio_vecs. Hand applied, as it rejected violently with commit
> >     5014c311baa2.
> >
> >     Signed-off-by: Jens Axboe <axboe-b10kYP2dOMg@public.gmane.org>
> >--
> 
> Looks like there is a problem with bio_clone_fast()
> 
> This change makes the problem go away:
> --
> diff --git a/block/bio.c b/block/bio.c
> index dbabd48..5e93733 100644
> --- a/block/bio.c
> +++ b/block/bio.c
> @@ -1791,7 +1791,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
>          * Discards need a mutable bio_vec to accommodate the payload
>          * required by the DSM TRIM and UNMAP commands.
>          */
> -       if (bio->bi_rw & REQ_DISCARD)
> +       if (1 || bio->bi_rw & REQ_DISCARD)
>                 split = bio_clone_bioset(bio, gfp, bs);
>         else
>                 split = bio_clone_fast(bio, gfp, bs);
> --
> 
> Any thoughts?
---end quoted text---
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Ming Lei]

Hi Sagi,

On Sun, Feb 14, 2016@11:22 PM, Christoph Hellwig <hch@infradead.org> wrote:
> Adding Ming to Cc.
>
> But I don't think simply not cloning the biovecs is the right thing
> to do in the end.  This must be something with the bvec iterators.

I agree with Christoph, and there might be issues somewhere.

> From the log:
> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap

The above gap shouldn't have come since blk_bio_segment_split() splits
out one new bio if gap is detected.

Sort of the following code can be added in driver or prep_fn to check if
bvec of  the rq is correct:

rq_for_each_segment(bvec, sc->request, iter) {
     //check if there is gap between bvec
}

I don't know how to use iser, and looks everything works fine after
I setup virt boundary as 4095 for null_blk by the attachment
patch.

> Full quote for Ming:
>
> On Sun, Feb 14, 2016@04:02:18PM +0200, Sagi Grimberg wrote:
>>
>> >>I'm bisecting now, there are a couple of patches from Ming in
>> >>the area of the bio splitting code...
>> >>
>> >>CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>> >>wrt the virtual boundary so I think nvme will break as well.

The bisected commit is merged to v4.3, and looks no such kind of
report from nvme.

>> >
>> >Bisection reveals that this one is the culprit:
>> >
>> >commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
>> >Author: Ming Lei <ming.lei at canonical.com>
>> >Date:   Thu Sep 17 09:58:38 2015 -0600
>> >
>> >     block: blk-merge: fast-clone bio when splitting rw bios
>> >
>> >     biovecs has become immutable since v3.13, so it isn't necessary
>> >     to allocate biovecs for the new cloned bios, then we can save
>> >     one extra biovecs allocation/copy, and the allocation is often
>> >     not fixed-length and a bit more expensive.
>> >
>> >     For example, if the 'max_sectors_kb' of null blk's queue is set
>> >     as 16(32 sectors) via sysfs just for making more splits, this patch
>> >     can increase throught about ~70% in the sequential read test over
>> >     null_blk(direct io, bs: 1M).
>> >
>> >     Cc: Christoph Hellwig <hch at infradead.org>
>> >     Cc: Kent Overstreet <kent.overstreet at gmail.com>
>> >     Cc: Ming Lin <ming.l at ssi.samsung.com>
>> >     Cc: Dongsu Park <dpark at posteo.net>
>> >     Signed-off-by: Ming Lei <ming.lei at canonical.com>
>> >
>> >     This fixes a performance regression introduced by commit 54efd50bfd,
>> >     and allows us to take full advantage of the fact that we have
>> >immutable
>> >     bio_vecs. Hand applied, as it rejected violently with commit
>> >     5014c311baa2.
>> >
>> >     Signed-off-by: Jens Axboe <axboe at fb.com>
>> >--
>>
>> Looks like there is a problem with bio_clone_fast()
>>
>> This change makes the problem go away:
>> --
>> diff --git a/block/bio.c b/block/bio.c
>> index dbabd48..5e93733 100644
>> --- a/block/bio.c
>> +++ b/block/bio.c
>> @@ -1791,7 +1791,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
>>          * Discards need a mutable bio_vec to accommodate the payload
>>          * required by the DSM TRIM and UNMAP commands.
>>          */
>> -       if (bio->bi_rw & REQ_DISCARD)
>> +       if (1 || bio->bi_rw & REQ_DISCARD)
>>                 split = bio_clone_bioset(bio, gfp, bs);
>>         else
>>                 split = bio_clone_fast(bio, gfp, bs);
>> --
>>
>> Any thoughts?

I don't think bio_clone_fast() is wrong, which use bvec table from
the original bio, and drivers are not allowed to change the table, and
should just call the standard iterator helpers to access bvec.

Also bio_for_each_segment_all() can't be used to iterate over one
cloned bio.

Thanks,
-------------- next part --------------
A non-text attachment was scrubbed...
Name: null_blk_sg_virt_boundary.patch
Type: text/x-patch
Size: 1621 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-nvme/attachments/20160215/26a7157b/attachment.bin>

Re: 4.5-rc iser issues

[Ming Lei]

[-- Attachment #1: Type: text/plain, Size: 4011 bytes --]

Hi Sagi,

On Sun, Feb 14, 2016 at 11:22 PM, Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org> wrote:
> Adding Ming to Cc.
>
> But I don't think simply not cloning the biovecs is the right thing
> to do in the end.  This must be something with the bvec iterators.

I agree with Christoph, and there might be issues somewhere.

> From the log:
> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap

The above gap shouldn't have come since blk_bio_segment_split() splits
out one new bio if gap is detected.

Sort of the following code can be added in driver or prep_fn to check if
bvec of  the rq is correct:

rq_for_each_segment(bvec, sc->request, iter) {
     //check if there is gap between bvec
}

I don't know how to use iser, and looks everything works fine after
I setup virt boundary as 4095 for null_blk by the attachment
patch.

> Full quote for Ming:
>
> On Sun, Feb 14, 2016 at 04:02:18PM +0200, Sagi Grimberg wrote:
>>
>> >>I'm bisecting now, there are a couple of patches from Ming in
>> >>the area of the bio splitting code...
>> >>
>> >>CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>> >>wrt the virtual boundary so I think nvme will break as well.

The bisected commit is merged to v4.3, and looks no such kind of
report from nvme.

>> >
>> >Bisection reveals that this one is the culprit:
>> >
>> >commit 52cc6eead9095e2faf2ec7afc013aa3af1f01ac5
>> >Author: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
>> >Date:   Thu Sep 17 09:58:38 2015 -0600
>> >
>> >     block: blk-merge: fast-clone bio when splitting rw bios
>> >
>> >     biovecs has become immutable since v3.13, so it isn't necessary
>> >     to allocate biovecs for the new cloned bios, then we can save
>> >     one extra biovecs allocation/copy, and the allocation is often
>> >     not fixed-length and a bit more expensive.
>> >
>> >     For example, if the 'max_sectors_kb' of null blk's queue is set
>> >     as 16(32 sectors) via sysfs just for making more splits, this patch
>> >     can increase throught about ~70% in the sequential read test over
>> >     null_blk(direct io, bs: 1M).
>> >
>> >     Cc: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
>> >     Cc: Kent Overstreet <kent.overstreet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> >     Cc: Ming Lin <ming.l-Vzezgt5dB6uUEJcrhfAQsw@public.gmane.org>
>> >     Cc: Dongsu Park <dpark-VwIFZPTo/vqsTnJN9+BGXg@public.gmane.org>
>> >     Signed-off-by: Ming Lei <ming.lei-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
>> >
>> >     This fixes a performance regression introduced by commit 54efd50bfd,
>> >     and allows us to take full advantage of the fact that we have
>> >immutable
>> >     bio_vecs. Hand applied, as it rejected violently with commit
>> >     5014c311baa2.
>> >
>> >     Signed-off-by: Jens Axboe <axboe-b10kYP2dOMg@public.gmane.org>
>> >--
>>
>> Looks like there is a problem with bio_clone_fast()
>>
>> This change makes the problem go away:
>> --
>> diff --git a/block/bio.c b/block/bio.c
>> index dbabd48..5e93733 100644
>> --- a/block/bio.c
>> +++ b/block/bio.c
>> @@ -1791,7 +1791,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
>>          * Discards need a mutable bio_vec to accommodate the payload
>>          * required by the DSM TRIM and UNMAP commands.
>>          */
>> -       if (bio->bi_rw & REQ_DISCARD)
>> +       if (1 || bio->bi_rw & REQ_DISCARD)
>>                 split = bio_clone_bioset(bio, gfp, bs);
>>         else
>>                 split = bio_clone_fast(bio, gfp, bs);
>> --
>>
>> Any thoughts?

I don't think bio_clone_fast() is wrong, which use bvec table from
the original bio, and drivers are not allowed to change the table, and
should just call the standard iterator helpers to access bvec.

Also bio_for_each_segment_all() can't be used to iterate over one
cloned bio.

Thanks,

[-- Attachment #2: null_blk_sg_virt_boundary.patch --]
[-- Type: text/x-patch, Size: 1621 bytes --]

diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 8ba1e97..5328f3c 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -10,6 +10,8 @@
 #include <linux/hrtimer.h>
 #include <linux/lightnvm.h>
 
+#define MAX_SG	128
+
 struct nullb_cmd {
 	struct list_head list;
 	struct llist_node ll_list;
@@ -19,6 +21,7 @@ struct nullb_cmd {
 	unsigned int tag;
 	struct nullb_queue *nq;
 	struct hrtimer timer;
+	struct scatterlist sg[MAX_SG];
 };
 
 struct nullb_queue {
@@ -351,6 +354,23 @@ static void null_request_fn(struct request_queue *q)
 	}
 }
 
+static int handle_sg(struct nullb_cmd *cmd)
+{
+	int num, i;
+	struct request *rq = cmd->rq;
+
+	num = blk_rq_map_sg(rq->q, rq, cmd->sg);
+	trace_printk("%s dump sg for %p(%d)\n", __func__, rq, rq->tag);
+	for (i = 0; i < num; i++) {
+		struct scatterlist *sg = &cmd->sg[i];
+		trace_printk("\t %4d: %u %u %llu\n",
+			     i, sg->offset, sg->length,
+			     (unsigned long long)sg->dma_address);
+	}
+
+	return 0;
+}
+
 static int null_queue_rq(struct blk_mq_hw_ctx *hctx,
 			 const struct blk_mq_queue_data *bd)
 {
@@ -365,6 +385,8 @@ static int null_queue_rq(struct blk_mq_hw_ctx *hctx,
 
 	blk_mq_start_request(bd->rq);
 
+	handle_sg(cmd);
+
 	null_handle_cmd(cmd);
 	return BLK_MQ_RQ_QUEUE_OK;
 }
@@ -707,6 +729,8 @@ static int null_add_dev(void)
 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, nullb->q);
 	queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, nullb->q);
 
+	blk_queue_virt_boundary(nullb->q, (1UL << 12) - 1);
+	blk_queue_max_segments(nullb->q, MAX_SG);
 
 	mutex_lock(&lock);
 	list_add_tail(&nullb->list, &nullb_list);

4.5-rc iser issues

[Sagi Grimberg]

> Hi Sagi,

Hey,

>> But I don't think simply not cloning the biovecs is the right thing
>> to do in the end.  This must be something with the bvec iterators.
>
> I agree with Christoph, and there might be issues somewhere.
>

Me too, it was just an isolation step...

>>  From the log:
>> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
>> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>
> The above gap shouldn't have come since blk_bio_segment_split() splits
> out one new bio if gap is detected.
>
> Sort of the following code can be added in driver or prep_fn to check if
> bvec of  the rq is correct:
>
> rq_for_each_segment(bvec, sc->request, iter) {
>       //check if there is gap between bvec
> }

I added this indication and the gap detection does trigger a bio
split.

>
> I don't know how to use iser, and looks everything works fine after
> I setup virt boundary as 4095 for null_blk by the attachment
> patch.

That's probably because it's artificial and there is no HW with a real
limitation...

>
>> Full quote for Ming:
>>
>> On Sun, Feb 14, 2016@04:02:18PM +0200, Sagi Grimberg wrote:
>>>
>>>>> I'm bisecting now, there are a couple of patches from Ming in
>>>>> the area of the bio splitting code...
>>>>>
>>>>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>>>>> wrt the virtual boundary so I think nvme will break as well.
>
> The bisected commit is merged to v4.3, and looks no such kind of
> report from nvme.

I'm wandering how can that be... because clearly iser is seeing gaps
which like nvme, it can't handle those. Maybe this is scsi specific?

Re: 4.5-rc iser issues

[Sagi Grimberg]

> Hi Sagi,

Hey,

>> But I don't think simply not cloning the biovecs is the right thing
>> to do in the end.  This must be something with the bvec iterators.
>
> I agree with Christoph, and there might be issues somewhere.
>

Me too, it was just an isolation step...

>>  From the log:
>> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
>> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>
> The above gap shouldn't have come since blk_bio_segment_split() splits
> out one new bio if gap is detected.
>
> Sort of the following code can be added in driver or prep_fn to check if
> bvec of  the rq is correct:
>
> rq_for_each_segment(bvec, sc->request, iter) {
>       //check if there is gap between bvec
> }

I added this indication and the gap detection does trigger a bio
split.

>
> I don't know how to use iser, and looks everything works fine after
> I setup virt boundary as 4095 for null_blk by the attachment
> patch.

That's probably because it's artificial and there is no HW with a real
limitation...

>
>> Full quote for Ming:
>>
>> On Sun, Feb 14, 2016 at 04:02:18PM +0200, Sagi Grimberg wrote:
>>>
>>>>> I'm bisecting now, there are a couple of patches from Ming in
>>>>> the area of the bio splitting code...
>>>>>
>>>>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>>>>> wrt the virtual boundary so I think nvme will break as well.
>
> The bisected commit is merged to v4.3, and looks no such kind of
> report from nvme.

I'm wandering how can that be... because clearly iser is seeing gaps
which like nvme, it can't handle those. Maybe this is scsi specific?
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Ming Lei]

On Mon, Feb 15, 2016 at 12:29 AM, Sagi Grimberg
<sagig@dev.mellanox.co.il> wrote:
>> Hi Sagi,
>
>
> Hey,
>
>>> But I don't think simply not cloning the biovecs is the right thing
>>> to do in the end.  This must be something with the bvec iterators.
>>
>>
>> I agree with Christoph, and there might be issues somewhere.
>>
>
> Me too, it was just an isolation step...
>
>>>  From the log:
>>> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
>>> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>
>>
>> The above gap shouldn't have come since blk_bio_segment_split() splits
>> out one new bio if gap is detected.
>>
>> Sort of the following code can be added in driver or prep_fn to check if
>> bvec of  the rq is correct:
>>
>> rq_for_each_segment(bvec, sc->request, iter) {
>>       //check if there is gap between bvec
>> }
>
>
> I added this indication and the gap detection does trigger a bio
> split.

Then I suggest to add the similar check inside blk_queue_split()
further to see if the result bio('res' bio in the function) has gap.

>
>>
>> I don't know how to use iser, and looks everything works fine after
>> I setup virt boundary as 4095 for null_blk by the attachment
>> patch.
>
>
> That's probably because it's artificial and there is no HW with a real
> limitation...

I do check the trace_printk log, and basically one rq only includes one
segment if I set bs as 512 in fio test.

Thanks,

>
>>
>>> Full quote for Ming:
>>>
>>> On Sun, Feb 14, 2016@04:02:18PM +0200, Sagi Grimberg wrote:
>>>>
>>>>
>>>>>> I'm bisecting now, there are a couple of patches from Ming in
>>>>>> the area of the bio splitting code...
>>>>>>
>>>>>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>>>>>> wrt the virtual boundary so I think nvme will break as well.
>>
>>
>> The bisected commit is merged to v4.3, and looks no such kind of
>> report from nvme.
>
>
> I'm wandering how can that be... because clearly iser is seeing gaps
> which like nvme, it can't handle those. Maybe this is scsi specific?

Re: 4.5-rc iser issues

[Ming Lei]

On Mon, Feb 15, 2016 at 12:29 AM, Sagi Grimberg
<sagig-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org> wrote:
>> Hi Sagi,
>
>
> Hey,
>
>>> But I don't think simply not cloning the biovecs is the right thing
>>> to do in the end.  This must be something with the bvec iterators.
>>
>>
>> I agree with Christoph, and there might be issues somewhere.
>>
>
> Me too, it was just an isolation step...
>
>>>  From the log:
>>> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
>>> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>
>>
>> The above gap shouldn't have come since blk_bio_segment_split() splits
>> out one new bio if gap is detected.
>>
>> Sort of the following code can be added in driver or prep_fn to check if
>> bvec of  the rq is correct:
>>
>> rq_for_each_segment(bvec, sc->request, iter) {
>>       //check if there is gap between bvec
>> }
>
>
> I added this indication and the gap detection does trigger a bio
> split.

Then I suggest to add the similar check inside blk_queue_split()
further to see if the result bio('res' bio in the function) has gap.

>
>>
>> I don't know how to use iser, and looks everything works fine after
>> I setup virt boundary as 4095 for null_blk by the attachment
>> patch.
>
>
> That's probably because it's artificial and there is no HW with a real
> limitation...

I do check the trace_printk log, and basically one rq only includes one
segment if I set bs as 512 in fio test.

Thanks,

>
>>
>>> Full quote for Ming:
>>>
>>> On Sun, Feb 14, 2016 at 04:02:18PM +0200, Sagi Grimberg wrote:
>>>>
>>>>
>>>>>> I'm bisecting now, there are a couple of patches from Ming in
>>>>>> the area of the bio splitting code...
>>>>>>
>>>>>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>>>>>> wrt the virtual boundary so I think nvme will break as well.
>>
>>
>> The bisected commit is merged to v4.3, and looks no such kind of
>> report from nvme.
>
>
> I'm wandering how can that be... because clearly iser is seeing gaps
> which like nvme, it can't handle those. Maybe this is scsi specific?
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Ming Lei]

On Mon, Feb 15, 2016 at 12:29 AM, Sagi Grimberg
<sagig@dev.mellanox.co.il> wrote:
>> Hi Sagi,
>
>
> Hey,
>
>>> But I don't think simply not cloning the biovecs is the right thing
>>> to do in the end.  This must be something with the bvec iterators.
>>
>>
>> I agree with Christoph, and there might be issues somewhere.
>>
>
> Me too, it was just an isolation step...
>
>>>  From the log:
>>> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
>>> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>
>>
>> The above gap shouldn't have come since blk_bio_segment_split() splits
>> out one new bio if gap is detected.
>>
>> Sort of the following code can be added in driver or prep_fn to check if
>> bvec of  the rq is correct:
>>
>> rq_for_each_segment(bvec, sc->request, iter) {
>>       //check if there is gap between bvec
>> }
>
>
> I added this indication and the gap detection does trigger a bio
> split.
>
>>
>> I don't know how to use iser, and looks everything works fine after
>> I setup virt boundary as 4095 for null_blk by the attachment
>> patch.
>
>
> That's probably because it's artificial and there is no HW with a real
> limitation...
>
>>
>>> Full quote for Ming:
>>>
>>> On Sun, Feb 14, 2016@04:02:18PM +0200, Sagi Grimberg wrote:
>>>>
>>>>
>>>>>> I'm bisecting now, there are a couple of patches from Ming in
>>>>>> the area of the bio splitting code...
>>>>>>
>>>>>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>>>>>> wrt the virtual boundary so I think nvme will break as well.
>>
>>
>> The bisected commit is merged to v4.3, and looks no such kind of
>> report from nvme.
>
>
> I'm wandering how can that be... because clearly iser is seeing gaps
> which like nvme, it can't handle those. Maybe this is scsi specific?

I can reproduce the issue now, and it is easy to trigger it via your test
code on scsi device, but a bit difficult to get it on null_blk.

Turns out it is a block core issue, and it is in bio_will_gap() which gets
the last bvec via 'bi_io_vec[prev->bi_vcnt - 1]' directly.  I have posted
out one patchset for fixing the issue:

http://marc.info/?l=linux-kernel&m=145551975429092&w=2

Thanks,
Ming

Re: 4.5-rc iser issues

[Ming Lei]

On Mon, Feb 15, 2016 at 12:29 AM, Sagi Grimberg
<sagig-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org> wrote:
>> Hi Sagi,
>
>
> Hey,
>
>>> But I don't think simply not cloning the biovecs is the right thing
>>> to do in the end.  This must be something with the bvec iterators.
>>
>>
>> I agree with Christoph, and there might be issues somewhere.
>>
>
> Me too, it was just an isolation step...
>
>>>  From the log:
>>> iser: sg[0] dma_addr:0x85FC06000 off:0x0 sz:0x200 dma_len:0x200
>>> iser: sg[1] dma_addr:0x860334000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>> iser: sg[2] dma_addr:0x860335000 off:0x0 sz:0x200 dma_len:0x200 <-- gap
>>
>>
>> The above gap shouldn't have come since blk_bio_segment_split() splits
>> out one new bio if gap is detected.
>>
>> Sort of the following code can be added in driver or prep_fn to check if
>> bvec of  the rq is correct:
>>
>> rq_for_each_segment(bvec, sc->request, iter) {
>>       //check if there is gap between bvec
>> }
>
>
> I added this indication and the gap detection does trigger a bio
> split.
>
>>
>> I don't know how to use iser, and looks everything works fine after
>> I setup virt boundary as 4095 for null_blk by the attachment
>> patch.
>
>
> That's probably because it's artificial and there is no HW with a real
> limitation...
>
>>
>>> Full quote for Ming:
>>>
>>> On Sun, Feb 14, 2016 at 04:02:18PM +0200, Sagi Grimberg wrote:
>>>>
>>>>
>>>>>> I'm bisecting now, there are a couple of patches from Ming in
>>>>>> the area of the bio splitting code...
>>>>>>
>>>>>> CC'ing Ming, Linux-block and Linux-nvme as iser is identical to nvme
>>>>>> wrt the virtual boundary so I think nvme will break as well.
>>
>>
>> The bisected commit is merged to v4.3, and looks no such kind of
>> report from nvme.
>
>
> I'm wandering how can that be... because clearly iser is seeing gaps
> which like nvme, it can't handle those. Maybe this is scsi specific?

I can reproduce the issue now, and it is easy to trigger it via your test
code on scsi device, but a bit difficult to get it on null_blk.

Turns out it is a block core issue, and it is in bio_will_gap() which gets
the last bvec via 'bi_io_vec[prev->bi_vcnt - 1]' directly.  I have posted
out one patchset for fixing the issue:

http://marc.info/?l=linux-kernel&m=145551975429092&w=2

Thanks,
Ming
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

4.5-rc iser issues

[Sagi Grimberg]

> I can reproduce the issue now, and it is easy to trigger it via your test
> code on scsi device, but a bit difficult to get it on null_blk.
>
> Turns out it is a block core issue, and it is in bio_will_gap() which gets
> the last bvec via 'bi_io_vec[prev->bi_vcnt - 1]' directly.  I have posted
> out one patchset for fixing the issue:
>
> http://marc.info/?l=linux-kernel&m=145551975429092&w=2

Thanks Ming!

I'll give it a shot...

Re: 4.5-rc iser issues

[Sagi Grimberg]

> I can reproduce the issue now, and it is easy to trigger it via your test
> code on scsi device, but a bit difficult to get it on null_blk.
>
> Turns out it is a block core issue, and it is in bio_will_gap() which gets
> the last bvec via 'bi_io_vec[prev->bi_vcnt - 1]' directly.  I have posted
> out one patchset for fixing the issue:
>
> http://marc.info/?l=linux-kernel&m=145551975429092&w=2

Thanks Ming!

I'll give it a shot...
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html