From: Laurent Vivier <lvivier@redhat.com>
To: kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Cc: Andrew Jones <drjones@redhat.com>,
thuth@redhat.com, dgibson@redhat.com,
david@gibson.dropbear.id.au, agraf@suse.de, pbonzini@redhat.com,
rkrcmar@redhat.com
Subject: Re: [kvm-unit-tests PATCH v6 00/18] ppc64: initial drop
Date: Thu, 25 Feb 2016 15:10:44 +0000 [thread overview]
Message-ID: <56CF1974.40302@redhat.com> (raw)
In-Reply-To: <1455897503-11835-1-git-send-email-drjones@redhat.com>
Hi,
based on Drew's work, I've written two small patches to add support of
ppc64le host and target.
As Drew's series is not merged I don't send yet theses patches, but you
can find them here:
https://github.com/vivier/kvm-unit-tests/commits/ppc64/endianness-v1
1- powerpc: allow to build big-endian binaries on little-endian host
2- powerpc: select endianness
Patch 2 allows to build and test ppc64le target.
I don't know what to do about these two patches: should I wait Drew's
series is merged or should I send them now for review?
Thanks,
Laurent
On 19/02/2016 16:58, Andrew Jones wrote:
> This series brings basic setup; starts a test's C entry point, main(),
> and printf, exit, and malloc work. Three more series should follow this
> one which must bring; vector support, mmu support, and smp support, at
> which point I believe the framework could just evolve with the creation
> of unit tests.
>
> Tested on TCG and a P8 kvm_pr machine, and Laurent has tested it on
> both a PowerMac G5 (kvm_pr) and a kvm_hv machine. I'm looking forward
> to hearing more testing feedback from others though.
>
> Patches also available here
> https://github.com/rhdrjones/kvm-unit-tests/commits/ppc64/initial-drop-v6
>
> v6:
> - setup: capture i & d cache size and use as needed [David]
> - setup: only capture cache size once, rather than every cpu node read [drew]
> - rtas: deal with the endianness of the rtas blob [David]
> - more David r-b's
> - one r-b from Radim
>
> v5:
> - add vprintf [David & drew]
> - move hcall and hcall_patch_broken_sc1 to assembler [David]
> - get cache line size from DT [David]
> (I left Thomas' r-b on "powerpc/ppc64: adapt arm's setup", but Thomas
> will probably want to look again, as this change added a few lines
> there. The commit message was updated to point out the changes.)
> - rename uart_lock (as it's not a uart) [David]
> - drop unused variables from powerpc makefiles
> (LOADADDR, phys_base, kernel_offset) [David & drew]
> - mkstandalone: only introduce a single firmware variable and set the
> trap handler first [Radim]
> - added more r-b's from David
>
> v4:
> - check for H_PRIVILEGE in broken sc1 probe [David]
> - rename rtas' lock from lock to rtas_lock [Thomas]
> - rtas: should only iterate to size/4 [drew]
> - add powerpc/.gitignore (ignore boot_rom.bin) [drew]
>
> v3:
> Paolo's comments:
> - got rid of zero-sized files
>
> Thomas' review comments:
> - remove useless casts in needed cast adding patch
> - got rid of build_romfs building (and committing a binary), just
> offset the rom binary by 256 bytes now
> - added a better error message for a -smp N, N > NR_CPUS user error
> - got rid of infinite loop with broken rtas-poweroff
> - one r-b (wasn't sure the "looks good"'s counted, so didn't add more)
>
> Laurent's testing led me to
> - fix a problem on kvm_pr with broken sc1
> - fix handling of memory regions, expect more than one
> - and a fix to DT code so that works
>
> Additionally:
> - new patches
> - cscope: ppc64 needs to look in lib/powerpc/asm too,
> and arm64 in lib/arm/asm
> - handle memory regions better also for arm
> - a misc trivial fix for arm...
> - align toc to 256 bytes for later gcc
>
> v2:
> Besides rebasing on latest master, v2 addresses all of David's comments
> - assembler cleanup
> - jump into the RTAS blob we get from DT, instead of reproducing it
> - don't store the RTAS root node, always hunt it down
>
> We still haven't addressed debug-exit. Plugging chr-testdev into an spapr
> vty is probably what we should investigate first (as was suggested by Alex
> Graf under the v1 review). For now we keep the hack from v1, but simplified.
>
>
> Andrew Jones (18):
> arm/arm64: trivial: another assert fix
> Makefile: cscope: also look in arch shared asm
> lib: asm-generic: add missing casts
> devicetree: fix dt_get_memory_params
> arm/arm64: setup improvements
> lib: add vprintf
> lib: share arm-selftest utility functions
> config: no need to mix arch makefiles
> powerpc/ppc64: start skeleton framework
> powerpc/ppc64: ppc-ify makefiles and linker script
> powerpc/ppc64: add a boot rom
> powerpc/ppc64: add hcall support and putchar
> powerpc/ppc64: adapt arm's setup
> powerpc/ppc64: relocate linker VMAs
> powerpc/ppc64: add run script and unittests.cfg
> mkstandalone: add support for powerpc
> powerpc/ppc64: add RTAS support
> powerpc/ppc64: make a fake debug-exit
>
> Makefile | 8 +-
> README | 3 +-
> arm/Makefile | 1 +
> config/config-arm.mak => arm/Makefile.arm | 2 +-
> config/config-arm64.mak => arm/Makefile.arm64 | 2 +-
> .../config-arm-common.mak => arm/Makefile.common | 3 +-
> arm/selftest.c | 45 ++-----
> configure | 6 +
> lib/arm/asm/setup.h | 9 ++
> lib/arm/io.c | 3 +-
> lib/arm/setup.c | 66 ++++++---
> lib/asm-generic/io.h | 12 +-
> lib/devicetree.c | 8 +-
> lib/libcflat.h | 12 +-
> lib/powerpc/.gitignore | 1 +
> lib/powerpc/asm/hcall.h | 37 +++++
> lib/powerpc/asm/rtas.h | 26 ++++
> lib/powerpc/asm/setup.h | 29 ++++
> lib/powerpc/hcall.c | 33 +++++
> lib/powerpc/io.c | 37 +++++
> lib/powerpc/rtas.c | 139 +++++++++++++++++++
> lib/powerpc/setup.c | 150 +++++++++++++++++++++
> lib/ppc64/.gitignore | 1 +
> lib/ppc64/asm-offsets.c | 12 ++
> lib/ppc64/asm/asm-offsets.h | 1 +
> lib/ppc64/asm/hcall.h | 1 +
> lib/ppc64/asm/io.h | 5 +
> lib/ppc64/asm/page.h | 1 +
> lib/ppc64/asm/rtas.h | 1 +
> lib/ppc64/asm/setup.h | 1 +
> lib/ppc64/asm/spinlock.h | 11 ++
> lib/ppc64/spinlock.c | 11 ++
> lib/printf.c | 14 +-
> lib/report.c | 18 ++-
> lib/util.c | 18 +++
> lib/util.h | 23 ++++
> powerpc/.gitignore | 1 +
> powerpc/Makefile | 1 +
> powerpc/Makefile.common | 65 +++++++++
> powerpc/Makefile.ppc64 | 19 +++
> powerpc/boot_rom.S | 5 +
> powerpc/cstart64.S | 90 +++++++++++++
> powerpc/flat.lds | 44 ++++++
> powerpc/reloc64.c | 55 ++++++++
> powerpc/run | 55 ++++++++
> powerpc/selftest.c | 64 +++++++++
> powerpc/unittests.cfg | 30 +++++
> {config => scripts}/asm-offsets.mak | 0
> scripts/mkstandalone.sh | 5 +
> x86/Makefile | 1 +
> .../config-x86-common.mak => x86/Makefile.common | 0
> config/config-i386.mak => x86/Makefile.i386 | 2 +-
> config/config-x86_64.mak => x86/Makefile.x86_64 | 2 +-
> 53 files changed, 1110 insertions(+), 79 deletions(-)
> create mode 100644 arm/Makefile
> rename config/config-arm.mak => arm/Makefile.arm (90%)
> rename config/config-arm64.mak => arm/Makefile.arm64 (89%)
> rename config/config-arm-common.mak => arm/Makefile.common (96%)
> create mode 100644 lib/powerpc/.gitignore
> create mode 100644 lib/powerpc/asm/hcall.h
> create mode 100644 lib/powerpc/asm/rtas.h
> create mode 100644 lib/powerpc/asm/setup.h
> create mode 100644 lib/powerpc/hcall.c
> create mode 100644 lib/powerpc/io.c
> create mode 100644 lib/powerpc/rtas.c
> create mode 100644 lib/powerpc/setup.c
> create mode 100644 lib/ppc64/.gitignore
> create mode 100644 lib/ppc64/asm-offsets.c
> create mode 100644 lib/ppc64/asm/asm-offsets.h
> create mode 100644 lib/ppc64/asm/hcall.h
> create mode 100644 lib/ppc64/asm/io.h
> create mode 100644 lib/ppc64/asm/page.h
> create mode 100644 lib/ppc64/asm/rtas.h
> create mode 100644 lib/ppc64/asm/setup.h
> create mode 100644 lib/ppc64/asm/spinlock.h
> create mode 100644 lib/ppc64/spinlock.c
> create mode 100644 lib/util.c
> create mode 100644 lib/util.h
> create mode 100644 powerpc/.gitignore
> create mode 100644 powerpc/Makefile
> create mode 100644 powerpc/Makefile.common
> create mode 100644 powerpc/Makefile.ppc64
> create mode 100644 powerpc/boot_rom.S
> create mode 100644 powerpc/cstart64.S
> create mode 100644 powerpc/flat.lds
> create mode 100644 powerpc/reloc64.c
> create mode 100755 powerpc/run
> create mode 100644 powerpc/selftest.c
> create mode 100644 powerpc/unittests.cfg
> rename {config => scripts}/asm-offsets.mak (100%)
> create mode 100644 x86/Makefile
> rename config/config-x86-common.mak => x86/Makefile.common (100%)
> rename config/config-i386.mak => x86/Makefile.i386 (91%)
> rename config/config-x86_64.mak => x86/Makefile.x86_64 (93%)
>
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Vivier <lvivier@redhat.com>
To: kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Cc: Andrew Jones <drjones@redhat.com>,
thuth@redhat.com, dgibson@redhat.com,
david@gibson.dropbear.id.au, agraf@suse.de, pbonzini@redhat.com,
rkrcmar@redhat.com
Subject: Re: [kvm-unit-tests PATCH v6 00/18] ppc64: initial drop
Date: Thu, 25 Feb 2016 16:10:44 +0100 [thread overview]
Message-ID: <56CF1974.40302@redhat.com> (raw)
In-Reply-To: <1455897503-11835-1-git-send-email-drjones@redhat.com>
Hi,
based on Drew's work, I've written two small patches to add support of
ppc64le host and target.
As Drew's series is not merged I don't send yet theses patches, but you
can find them here:
https://github.com/vivier/kvm-unit-tests/commits/ppc64/endianness-v1
1- powerpc: allow to build big-endian binaries on little-endian host
2- powerpc: select endianness
Patch 2 allows to build and test ppc64le target.
I don't know what to do about these two patches: should I wait Drew's
series is merged or should I send them now for review?
Thanks,
Laurent
On 19/02/2016 16:58, Andrew Jones wrote:
> This series brings basic setup; starts a test's C entry point, main(),
> and printf, exit, and malloc work. Three more series should follow this
> one which must bring; vector support, mmu support, and smp support, at
> which point I believe the framework could just evolve with the creation
> of unit tests.
>
> Tested on TCG and a P8 kvm_pr machine, and Laurent has tested it on
> both a PowerMac G5 (kvm_pr) and a kvm_hv machine. I'm looking forward
> to hearing more testing feedback from others though.
>
> Patches also available here
> https://github.com/rhdrjones/kvm-unit-tests/commits/ppc64/initial-drop-v6
>
> v6:
> - setup: capture i & d cache size and use as needed [David]
> - setup: only capture cache size once, rather than every cpu node read [drew]
> - rtas: deal with the endianness of the rtas blob [David]
> - more David r-b's
> - one r-b from Radim
>
> v5:
> - add vprintf [David & drew]
> - move hcall and hcall_patch_broken_sc1 to assembler [David]
> - get cache line size from DT [David]
> (I left Thomas' r-b on "powerpc/ppc64: adapt arm's setup", but Thomas
> will probably want to look again, as this change added a few lines
> there. The commit message was updated to point out the changes.)
> - rename uart_lock (as it's not a uart) [David]
> - drop unused variables from powerpc makefiles
> (LOADADDR, phys_base, kernel_offset) [David & drew]
> - mkstandalone: only introduce a single firmware variable and set the
> trap handler first [Radim]
> - added more r-b's from David
>
> v4:
> - check for H_PRIVILEGE in broken sc1 probe [David]
> - rename rtas' lock from lock to rtas_lock [Thomas]
> - rtas: should only iterate to size/4 [drew]
> - add powerpc/.gitignore (ignore boot_rom.bin) [drew]
>
> v3:
> Paolo's comments:
> - got rid of zero-sized files
>
> Thomas' review comments:
> - remove useless casts in needed cast adding patch
> - got rid of build_romfs building (and committing a binary), just
> offset the rom binary by 256 bytes now
> - added a better error message for a -smp N, N > NR_CPUS user error
> - got rid of infinite loop with broken rtas-poweroff
> - one r-b (wasn't sure the "looks good"'s counted, so didn't add more)
>
> Laurent's testing led me to
> - fix a problem on kvm_pr with broken sc1
> - fix handling of memory regions, expect more than one
> - and a fix to DT code so that works
>
> Additionally:
> - new patches
> - cscope: ppc64 needs to look in lib/powerpc/asm too,
> and arm64 in lib/arm/asm
> - handle memory regions better also for arm
> - a misc trivial fix for arm...
> - align toc to 256 bytes for later gcc
>
> v2:
> Besides rebasing on latest master, v2 addresses all of David's comments
> - assembler cleanup
> - jump into the RTAS blob we get from DT, instead of reproducing it
> - don't store the RTAS root node, always hunt it down
>
> We still haven't addressed debug-exit. Plugging chr-testdev into an spapr
> vty is probably what we should investigate first (as was suggested by Alex
> Graf under the v1 review). For now we keep the hack from v1, but simplified.
>
>
> Andrew Jones (18):
> arm/arm64: trivial: another assert fix
> Makefile: cscope: also look in arch shared asm
> lib: asm-generic: add missing casts
> devicetree: fix dt_get_memory_params
> arm/arm64: setup improvements
> lib: add vprintf
> lib: share arm-selftest utility functions
> config: no need to mix arch makefiles
> powerpc/ppc64: start skeleton framework
> powerpc/ppc64: ppc-ify makefiles and linker script
> powerpc/ppc64: add a boot rom
> powerpc/ppc64: add hcall support and putchar
> powerpc/ppc64: adapt arm's setup
> powerpc/ppc64: relocate linker VMAs
> powerpc/ppc64: add run script and unittests.cfg
> mkstandalone: add support for powerpc
> powerpc/ppc64: add RTAS support
> powerpc/ppc64: make a fake debug-exit
>
> Makefile | 8 +-
> README | 3 +-
> arm/Makefile | 1 +
> config/config-arm.mak => arm/Makefile.arm | 2 +-
> config/config-arm64.mak => arm/Makefile.arm64 | 2 +-
> .../config-arm-common.mak => arm/Makefile.common | 3 +-
> arm/selftest.c | 45 ++-----
> configure | 6 +
> lib/arm/asm/setup.h | 9 ++
> lib/arm/io.c | 3 +-
> lib/arm/setup.c | 66 ++++++---
> lib/asm-generic/io.h | 12 +-
> lib/devicetree.c | 8 +-
> lib/libcflat.h | 12 +-
> lib/powerpc/.gitignore | 1 +
> lib/powerpc/asm/hcall.h | 37 +++++
> lib/powerpc/asm/rtas.h | 26 ++++
> lib/powerpc/asm/setup.h | 29 ++++
> lib/powerpc/hcall.c | 33 +++++
> lib/powerpc/io.c | 37 +++++
> lib/powerpc/rtas.c | 139 +++++++++++++++++++
> lib/powerpc/setup.c | 150 +++++++++++++++++++++
> lib/ppc64/.gitignore | 1 +
> lib/ppc64/asm-offsets.c | 12 ++
> lib/ppc64/asm/asm-offsets.h | 1 +
> lib/ppc64/asm/hcall.h | 1 +
> lib/ppc64/asm/io.h | 5 +
> lib/ppc64/asm/page.h | 1 +
> lib/ppc64/asm/rtas.h | 1 +
> lib/ppc64/asm/setup.h | 1 +
> lib/ppc64/asm/spinlock.h | 11 ++
> lib/ppc64/spinlock.c | 11 ++
> lib/printf.c | 14 +-
> lib/report.c | 18 ++-
> lib/util.c | 18 +++
> lib/util.h | 23 ++++
> powerpc/.gitignore | 1 +
> powerpc/Makefile | 1 +
> powerpc/Makefile.common | 65 +++++++++
> powerpc/Makefile.ppc64 | 19 +++
> powerpc/boot_rom.S | 5 +
> powerpc/cstart64.S | 90 +++++++++++++
> powerpc/flat.lds | 44 ++++++
> powerpc/reloc64.c | 55 ++++++++
> powerpc/run | 55 ++++++++
> powerpc/selftest.c | 64 +++++++++
> powerpc/unittests.cfg | 30 +++++
> {config => scripts}/asm-offsets.mak | 0
> scripts/mkstandalone.sh | 5 +
> x86/Makefile | 1 +
> .../config-x86-common.mak => x86/Makefile.common | 0
> config/config-i386.mak => x86/Makefile.i386 | 2 +-
> config/config-x86_64.mak => x86/Makefile.x86_64 | 2 +-
> 53 files changed, 1110 insertions(+), 79 deletions(-)
> create mode 100644 arm/Makefile
> rename config/config-arm.mak => arm/Makefile.arm (90%)
> rename config/config-arm64.mak => arm/Makefile.arm64 (89%)
> rename config/config-arm-common.mak => arm/Makefile.common (96%)
> create mode 100644 lib/powerpc/.gitignore
> create mode 100644 lib/powerpc/asm/hcall.h
> create mode 100644 lib/powerpc/asm/rtas.h
> create mode 100644 lib/powerpc/asm/setup.h
> create mode 100644 lib/powerpc/hcall.c
> create mode 100644 lib/powerpc/io.c
> create mode 100644 lib/powerpc/rtas.c
> create mode 100644 lib/powerpc/setup.c
> create mode 100644 lib/ppc64/.gitignore
> create mode 100644 lib/ppc64/asm-offsets.c
> create mode 100644 lib/ppc64/asm/asm-offsets.h
> create mode 100644 lib/ppc64/asm/hcall.h
> create mode 100644 lib/ppc64/asm/io.h
> create mode 100644 lib/ppc64/asm/page.h
> create mode 100644 lib/ppc64/asm/rtas.h
> create mode 100644 lib/ppc64/asm/setup.h
> create mode 100644 lib/ppc64/asm/spinlock.h
> create mode 100644 lib/ppc64/spinlock.c
> create mode 100644 lib/util.c
> create mode 100644 lib/util.h
> create mode 100644 powerpc/.gitignore
> create mode 100644 powerpc/Makefile
> create mode 100644 powerpc/Makefile.common
> create mode 100644 powerpc/Makefile.ppc64
> create mode 100644 powerpc/boot_rom.S
> create mode 100644 powerpc/cstart64.S
> create mode 100644 powerpc/flat.lds
> create mode 100644 powerpc/reloc64.c
> create mode 100755 powerpc/run
> create mode 100644 powerpc/selftest.c
> create mode 100644 powerpc/unittests.cfg
> rename {config => scripts}/asm-offsets.mak (100%)
> create mode 100644 x86/Makefile
> rename config/config-x86-common.mak => x86/Makefile.common (100%)
> rename config/config-i386.mak => x86/Makefile.i386 (91%)
> rename config/config-x86_64.mak => x86/Makefile.x86_64 (93%)
>
next prev parent reply other threads:[~2016-02-25 15:10 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-19 15:58 [kvm-unit-tests PATCH v6 00/18] ppc64: initial drop Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 01/18] arm/arm64: trivial: another assert fix Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 02/18] Makefile: cscope: also look in arch shared asm Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 03/18] lib: asm-generic: add missing casts Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 04/18] devicetree: fix dt_get_memory_params Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 05/18] arm/arm64: setup improvements Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 06/18] lib: add vprintf Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 07/18] lib: share arm-selftest utility functions Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 08/18] config: no need to mix arch makefiles Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 09/18] powerpc/ppc64: start skeleton framework Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 10/18] powerpc/ppc64: ppc-ify makefiles and linker script Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-23 15:07 ` Laurent Vivier
2016-02-23 15:07 ` Laurent Vivier
2016-02-23 15:45 ` Andrew Jones
2016-02-23 15:45 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 11/18] powerpc/ppc64: add a boot rom Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 12/18] powerpc/ppc64: add hcall support and putchar Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 13/18] powerpc/ppc64: adapt arm's setup Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-23 15:04 ` Andrew Jones
2016-02-23 15:04 ` Andrew Jones
2016-02-24 0:31 ` David Gibson
2016-02-24 0:31 ` David Gibson
2016-02-26 13:08 ` Andrew Jones
2016-02-26 13:08 ` Andrew Jones
2016-02-29 0:54 ` David Gibson
2016-02-29 0:54 ` David Gibson
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 14/18] powerpc/ppc64: relocate linker VMAs Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 15/18] powerpc/ppc64: add run script and unittests.cfg Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 16/18] mkstandalone: add support for powerpc Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 17/18] powerpc/ppc64: add RTAS support Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-19 16:10 ` Andrew Jones
2016-02-19 16:10 ` Andrew Jones
2016-02-22 3:26 ` David Gibson
2016-02-22 3:26 ` David Gibson
2016-02-22 7:39 ` Thomas Huth
2016-02-22 7:39 ` Thomas Huth
2016-02-22 7:56 ` David Gibson
2016-02-22 7:56 ` David Gibson
2016-02-23 15:03 ` Andrew Jones
2016-02-23 15:03 ` Andrew Jones
2016-02-24 0:30 ` David Gibson
2016-02-24 0:30 ` David Gibson
2016-02-19 15:58 ` [kvm-unit-tests PATCH v6 18/18] powerpc/ppc64: make a fake debug-exit Andrew Jones
2016-02-19 15:58 ` Andrew Jones
2016-02-25 15:10 ` Laurent Vivier [this message]
2016-02-25 15:10 ` [kvm-unit-tests PATCH v6 00/18] ppc64: initial drop Laurent Vivier
2016-02-26 4:24 ` David Gibson
2016-02-26 4:24 ` David Gibson
2016-02-26 13:05 ` Andrew Jones
2016-02-26 13:05 ` Andrew Jones
2016-02-26 13:15 ` Laurent Vivier
2016-02-26 13:15 ` Laurent Vivier
2016-02-26 13:41 ` David Gibson
2016-02-26 13:41 ` David Gibson
2016-02-26 13:47 ` Laurent Vivier
2016-02-26 13:47 ` Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CF1974.40302@redhat.com \
--to=lvivier@redhat.com \
--cc=agraf@suse.de \
--cc=david@gibson.dropbear.id.au \
--cc=dgibson@redhat.com \
--cc=drjones@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.