From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Alim Akhtar <alim.akhtar@samsung.com>,
linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, will.deacon@arm.com,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
devicetree@vger.kernel.org, l.majewski@samsung.com
Subject: Re: [RESPIN/PATCH] arm64: dts: Add tmu node for exynos7
Date: Fri, 26 Feb 2016 09:38:43 +0900 [thread overview]
Message-ID: <56CF9E93.9090905@samsung.com> (raw)
In-Reply-To: <1456391116-11553-1-git-send-email-alim.akhtar@samsung.com>
On 25.02.2016 18:05, Alim Akhtar wrote:
> This patch adds tmu node, related temprature sensor and triping
> point data for Atlas cpu core found on exynos7 SoC.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
> Change log:
> * no changes, just sending back from my email id.
All my comments from previous submission are still valid...
Best regards,
Krzysztof
>
> .../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi | 25 +++++++++
> .../arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 55 ++++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 20 +++++++
> 3 files changed, 100 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> new file mode 100644
> index 0000000..1d6dcf2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> @@ -0,0 +1,25 @@
> +/*
> + * Device tree sources for Exynos7 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <9>;
> +samsung,tmu_reference_voltage = <17>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <15>;
> +samsung,tmu_max_efuse_value = <100>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> new file mode 100644
> index 0000000..3970545
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> @@ -0,0 +1,55 @@
> +/*
> + * Device tree sources for default Exynos7 thermal zone definition
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +trips {
> + cpu-alert-0 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-1 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-2 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-3 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-4 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-5 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-6 {
> + temperature = <110000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + /* HW Trip point */
> + cpu-crit-0 {
> + temperature = <115000>; /* millicelsius */
> + hysteresis = <0>; /* millicelsius */
> + type = "critical";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c662f98..fc9d130 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -27,6 +27,7 @@
> pinctrl6 = &pinctrl_fsys0;
> pinctrl7 = &pinctrl_fsys1;
> pinctrl8 = &pinctrl_bus1;
> + tmuctrl0 = &tmuctrl_0;
> };
>
> cpus {
> @@ -538,6 +539,25 @@
> clocks = <&clock_peric0 PCLK_PWM>;
> clock-names = "timers";
> };
> +
> + tmuctrl_0: tmu@10060000 {
> + compatible = "samsung,exynos7-tmu";
> + reg = <0x10060000 0x200>;
> + interrupts = <0 108 0>;
> + clocks = <&clock_peris PCLK_TMU>,
> + <&clock_peris SCLK_TMU>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos7-tmu-sensor-conf.dtsi"
> + };
> +
> + thermal-zones {
> + atlas_thermal: atlas-thermal {
> + polling-delay-passive = <0>; /* milliseconds */
> + polling-delay = <0>; /* milliseconds */
> + thermal-sensors = <&tmuctrl_0>;
> + #include "exynos7-trip-points.dtsi"
> + };
> + };
> };
> };
>
>
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESPIN/PATCH] arm64: dts: Add tmu node for exynos7
Date: Fri, 26 Feb 2016 09:38:43 +0900 [thread overview]
Message-ID: <56CF9E93.9090905@samsung.com> (raw)
In-Reply-To: <1456391116-11553-1-git-send-email-alim.akhtar@samsung.com>
On 25.02.2016 18:05, Alim Akhtar wrote:
> This patch adds tmu node, related temprature sensor and triping
> point data for Atlas cpu core found on exynos7 SoC.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
> Change log:
> * no changes, just sending back from my email id.
All my comments from previous submission are still valid...
Best regards,
Krzysztof
>
> .../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi | 25 +++++++++
> .../arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 55 ++++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 20 +++++++
> 3 files changed, 100 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> new file mode 100644
> index 0000000..1d6dcf2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> @@ -0,0 +1,25 @@
> +/*
> + * Device tree sources for Exynos7 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <9>;
> +samsung,tmu_reference_voltage = <17>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <15>;
> +samsung,tmu_max_efuse_value = <100>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> new file mode 100644
> index 0000000..3970545
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> @@ -0,0 +1,55 @@
> +/*
> + * Device tree sources for default Exynos7 thermal zone definition
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +trips {
> + cpu-alert-0 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-1 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-2 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-3 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-4 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-5 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-6 {
> + temperature = <110000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + /* HW Trip point */
> + cpu-crit-0 {
> + temperature = <115000>; /* millicelsius */
> + hysteresis = <0>; /* millicelsius */
> + type = "critical";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c662f98..fc9d130 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -27,6 +27,7 @@
> pinctrl6 = &pinctrl_fsys0;
> pinctrl7 = &pinctrl_fsys1;
> pinctrl8 = &pinctrl_bus1;
> + tmuctrl0 = &tmuctrl_0;
> };
>
> cpus {
> @@ -538,6 +539,25 @@
> clocks = <&clock_peric0 PCLK_PWM>;
> clock-names = "timers";
> };
> +
> + tmuctrl_0: tmu at 10060000 {
> + compatible = "samsung,exynos7-tmu";
> + reg = <0x10060000 0x200>;
> + interrupts = <0 108 0>;
> + clocks = <&clock_peris PCLK_TMU>,
> + <&clock_peris SCLK_TMU>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos7-tmu-sensor-conf.dtsi"
> + };
> +
> + thermal-zones {
> + atlas_thermal: atlas-thermal {
> + polling-delay-passive = <0>; /* milliseconds */
> + polling-delay = <0>; /* milliseconds */
> + thermal-sensors = <&tmuctrl_0>;
> + #include "exynos7-trip-points.dtsi"
> + };
> + };
> };
> };
>
>
next prev parent reply other threads:[~2016-02-26 0:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 9:05 [RESPIN/PATCH] arm64: dts: Add tmu node for exynos7 Alim Akhtar
2016-02-25 9:05 ` Alim Akhtar
2016-02-26 0:38 ` Krzysztof Kozlowski [this message]
2016-02-26 0:38 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CF9E93.9090905@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=l.majewski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.