Re: [PATCH v3 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2

[Nicolas Ferre <nicolas.ferre@atmel.com>]

Le 01/03/2016 12:29, Romain Izard a écrit :
> Hi Nicolas,
> 
> 2016-03-01 11:27 GMT+01:00 Nicolas Ferre <nicolas.ferre@atmel.com>:
>> Le 01/02/2016 11:25, Romain Izard a écrit :
>>> The NAND Flash controller for SAMA5D2 has small differences that make
>>> it impossible to use the existing driver for SAMA5D3. This patchset
>>> uses the device tree's compatible string to get those differences,
>>> and the code is slightly modified to handle them.
>>>
>>> Base on linux-mtd-next, commit
>>> 15c0be7bec002f9a529dd0966d0db96dde176fd0
>>>
>>> See previous revisions to apply on the Atmel Linux 4.1 branch.
>>>
>>> Compile tested for sama5_defconfig, and tested on SAMA5D3xek as there
>>> is no existing SAMA5D2 board with NAND Flash memory (yet).
>>
>> Brian,
>>
>> Hi, do we need to resend this series with all the tags collected (aka
>> ping ;-)) ?
>>
> 
> A v4 has already been sent, and Brian has picked patches 1-4, as seen
> in: http://article.gmane.org/gmane.linux.drivers.devicetree/155864/

Ok, I forget it and it was in another mailbox on my side: sorry for the
noise...

> For patch #5, it is the update for the sama5d2.dtsi to describe the
> NAND controller. Perhaps you can take it on your tree for 4.6, it
> won't change anything until a board needs it, either Atmel's SAMA5D2 PTC
> or another one.

Absolutely. As I am collecting this material, it makes perfect sense to
add it to our at91-4.6-dt branch.

Thanks for the help Romain!

Bye,
-- 
Nicolas Ferre