Re: [PATCH V4 1/4] mfd: f81504-core: Add Fintek F81504/508/512 PCIE-to-UART/GPIO core support

[Peter Hung <hpeter@gmail.com>]

Hi Andy,

Andy Shevchenko 於 2016/2/23 下午 07:05 寫道:
> On Tue, 2016-02-23 at 14:30 +0800, Peter Hung wrote:
>> +config MFD_FINTEK_F81504_CORE
>> +        tristate "Fintek F81504/508/512 PCIE-to-UART/GPIO MFD
>> support"
>> +        depends on PCI
>> +        select MFD_CORE
>> +        default SERIAL_8250
>
> SERIAL_8250_PCI ?

In my opinion, 8250_pci & f81504_core are independently drivers.
So I'll set the default to SERIAL_8250.

>> +static bool f81504_is_gpio(unsigned int idx, u8 gpio_en)
>> +{
>> +	unsigned int i;
>> +
>> +	/* Find every port to check is multi-function port */
>> +	for (i = 0; i < ARRAY_SIZE(fintek_gpio_mapping); i++) {
>
>
>> +		if (fintek_gpio_mapping[i] != idx || !(gpio_en &
>> BIT(i)))
>> +			continue;
>> +
>> +		/*
>> +		 * This port is multi-function and enabled as gpio
>> mode.
>> +		 * So we'll not configure it as serial port.
>> +		 */
>> +		return true;
>
> Perhaps
>
> if (fintek_gpio_mapping[i] == idx && (gpio_en & BIT(i)))
>   return true;

Your code is more simple and readable. I'll change it for V5

Thanks for your advices.
-- 
With Best Regards,
Peter Hung
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html