* RH 7 nfs-utils update causes @ 2016-03-07 15:48 Mark Valites 2016-03-07 16:00 ` Benjamin Coddington 0 siblings, 1 reply; 13+ messages in thread From: Mark Valites @ 2016-03-07 15:48 UTC (permalink / raw) To: linux-nfs I recently updated a Red Hat 7 host. After rebooting, the nfs mounts on it (nfsver3,sec=krb5) failed to mount, due to the gss daemon segfaulting when the mount attempt happened: [ 7.816487] FS-Cache: Loaded [ 7.887575] FS-Cache: Netfs 'nfs' registered for caching [ 7.931164] rpc.gssd[498]: segfault at 5544452e ip 00007fbc9d704ee6 sp 00007ffc37291678 error 4 in libc-2.17.so[7fbc9d5ca000+1b 4000] [ 7.964578] abrt-hook-ccpp[994]: segfault at 0 ip 00007fba2e09431b sp 00007ffefa92fb50 error 4 in libreport.so.0.0.1[7fba2e0860 00+25000] [ 7.965398] Process 994(abrt-hook-ccpp) has RLIMIT_CORE set to 1 [ 7.965483] Aborting core At mount time, The console displays these messages as well: RPC: AUTH_GSS upcall timed out. Please check user daemon is running. gssd will start without issue if started manually on its own, but dies if I subsequently try to manually mount any of the nfs mounts. I've isolated the issue down to the latest update in the nfs-utils package: Working: nfs-utils-1.3.0-0.21.el7.x86_64 Broken: nfs-utils-1.3.0-0.21.el7_2.x86_64 (note the '_v2' difference) gssd/the mounting works without issue after backing down to the older nfs-utils version. It looks similar to the following bug report (fixed in 1.3.1), but I'm not 100% convinced it's the same: https://bugzilla.redhat.com/show_bug.cgi?id=1108615 If this is in fact the issue, I would be happy keeping the updated nfs-utils version, but working around the issue via changing my krb5.conf, but I'm not sure where the *preferred*_realm comes from - I do have *default*_realm set in my krb5.conf. If that's not it, I'd be happy to provide any additional information that may assist in troubleshooting & welcome any suggestions, but I'd greatly prefer to retain the OS-supplied nfs-utils. -Mark ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes 2016-03-07 15:48 RH 7 nfs-utils update causes Mark Valites @ 2016-03-07 16:00 ` Benjamin Coddington 2016-03-07 16:27 ` RH 7 nfs-utils update causes segfault Mark Valites 0 siblings, 1 reply; 13+ messages in thread From: Benjamin Coddington @ 2016-03-07 16:00 UTC (permalink / raw) To: Mark Valites; +Cc: linux-nfs On Mon, 7 Mar 2016, Mark Valites wrote: > I recently updated a Red Hat 7 host. After rebooting, the nfs mounts on it > (nfsver3,sec=krb5) failed to mount, due to the gss daemon segfaulting when the > mount attempt happened: > > [ 7.816487] FS-Cache: Loaded > [ 7.887575] FS-Cache: Netfs 'nfs' registered for caching > [ 7.931164] rpc.gssd[498]: segfault at 5544452e ip 00007fbc9d704ee6 sp > 00007ffc37291678 error 4 in libc-2.17.so[7fbc9d5ca000+1b > 4000] > [ 7.964578] abrt-hook-ccpp[994]: segfault at 0 ip 00007fba2e09431b sp > 00007ffefa92fb50 error 4 in libreport.so.0.0.1[7fba2e0860 > 00+25000] > [ 7.965398] Process 994(abrt-hook-ccpp) has RLIMIT_CORE set to 1 > [ 7.965483] Aborting core > > At mount time, The console displays these messages as well: > > RPC: AUTH_GSS upcall timed out. > Please check user daemon is running. > > gssd will start without issue if started manually on its own, but dies if I > subsequently try to manually mount any of the nfs mounts. > > I've isolated the issue down to the latest update in the nfs-utils package: > > Working: nfs-utils-1.3.0-0.21.el7.x86_64 > Broken: nfs-utils-1.3.0-0.21.el7_2.x86_64 > > (note the '_v2' difference) > > gssd/the mounting works without issue after backing down to the older > nfs-utils version. > > It looks similar to the following bug report (fixed in 1.3.1), but I'm not > 100% convinced it's the same: > > https://bugzilla.redhat.com/show_bug.cgi?id=1108615 > > If this is in fact the issue, I would be happy keeping the updated nfs-utils > version, but working around the issue via changing my krb5.conf, but I'm not > sure where the *preferred*_realm comes from - I do have *default*_realm set in > my krb5.conf. > > If that's not it, I'd be happy to provide any additional information that may > assist in troubleshooting & welcome any suggestions, but I'd greatly prefer to > retain the OS-supplied nfs-utils. > > -Mark Hey Mark, could it be this one? https://bugzilla.redhat.com/show_bug.cgi?id=1313090 Ben ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-07 16:00 ` Benjamin Coddington @ 2016-03-07 16:27 ` Mark Valites 2016-03-07 19:49 ` Benjamin Coddington 0 siblings, 1 reply; 13+ messages in thread From: Mark Valites @ 2016-03-07 16:27 UTC (permalink / raw) To: linux-nfs On 03/07/2016 11:00 AM, Benjamin Coddington wrote: > Hey Mark, could it be this one? > > https://bugzilla.redhat.com/show_bug.cgi?id=1313090 > > Ben > Doesn't look like it: $ sudo restorecon -v /etc/krb5.keytab <no output> $ ls -laZ /etc/krb5.keytab -rw-------. root root unconfined_u:object_r:krb5_keytab_t:s0 /etc/krb5.keytab I'd only had selinux in permissive mode, so I tried disabling it as well, but that too unfortunately made no difference. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-07 16:27 ` RH 7 nfs-utils update causes segfault Mark Valites @ 2016-03-07 19:49 ` Benjamin Coddington 2016-03-08 16:57 ` Mark Valites 0 siblings, 1 reply; 13+ messages in thread From: Benjamin Coddington @ 2016-03-07 19:49 UTC (permalink / raw) To: Mark Valites; +Cc: linux-nfs On Mon, 7 Mar 2016, Mark Valites wrote: > On 03/07/2016 11:00 AM, Benjamin Coddington wrote: > > > Hey Mark, could it be this one? > > > > https://bugzilla.redhat.com/show_bug.cgi?id=1313090 > > > > Ben > > > > Doesn't look like it: > > $ sudo restorecon -v /etc/krb5.keytab > <no output> > $ ls -laZ /etc/krb5.keytab > -rw-------. root root unconfined_u:object_r:krb5_keytab_t:s0 /etc/krb5.keytab > > I'd only had selinux in permissive mode, so I tried disabling it as well, but > that too unfortunately made no difference. That bug was only tickled in my case if the normal host principals were not found in the keytab. In that specific case, selinux prohibited access to the keytab, causing the host keys to be unable to be looked up, and the bug was hit. Best bet would be to attache a debugger to rpc.gssd and get a stack trace of it when it crashes. That will give us something to work from. You can do that with gdb -p <pid of gssd>. Something like `gdb -p $(pidof rpc.gssd)` will work -- then type "continue" to let the process continue to run. When it fails you can enter "bt" to emit a back trace. That information would be very helpful. Ben ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-07 19:49 ` Benjamin Coddington @ 2016-03-08 16:57 ` Mark Valites 2016-03-08 18:21 ` Benjamin Coddington 0 siblings, 1 reply; 13+ messages in thread From: Mark Valites @ 2016-03-08 16:57 UTC (permalink / raw) To: linux-nfs On 03/07/2016 02:49 PM, Benjamin Coddington wrote: > Best bet would be to attache a debugger to rpc.gssd and get a stack trace of > it when it crashes. That will give us something to work from. > > You can do that with gdb -p <pid of gssd>. Something like `gdb -p $(pidof > rpc.gssd)` will work -- then type "continue" to let the process continue to > run. When it fails you can enter "bt" to emit a back trace. That > information would be very helpful. Thank you for the gdb usage suggestion - I needed it... Here's the output: GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-80.el7 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Attaching to process 492 Reading symbols from /usr/sbin/rpc.gssd...Reading symbols from /usr/lib/debug/usr/sbin/rpc.gssd.debug...done. done. Reading symbols from /lib64/libtirpc.so.1...Reading symbols from /lib64/libtirpc.so.1...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/libtirpc.so.1 Reading symbols from /lib64/libgssapi_krb5.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libgssapi_krb5.so.2.2.debug...done. done. Loaded symbols for /lib64/libgssapi_krb5.so.2 Reading symbols from /lib64/libkrb5.so.3...Reading symbols from /usr/lib/debug/usr/lib64/libkrb5.so.3.3.debug...done. done. Loaded symbols for /lib64/libkrb5.so.3 Reading symbols from /lib64/libk5crypto.so.3...Reading symbols from /usr/lib/debug/usr/lib64/libk5crypto.so.3.1.debug...done. done. Loaded symbols for /lib64/libk5crypto.so.3 Reading symbols from /lib64/libcom_err.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libcom_err.so.2.1.debug...done. done. Loaded symbols for /lib64/libcom_err.so.2 Reading symbols from /lib64/libc.so.6...Reading symbols from /usr/lib/debug/usr/lib64/libc-2.17.so.debug...done. done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/libnsl.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libnsl-2.17.so.debug...done. done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libpthread.so.0...Reading symbols from /usr/lib/debug/usr/lib64/libpthread-2.17.so.debug...done. done. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libkrb5support.so.0...Reading symbols from /usr/lib/debug/usr/lib64/libkrb5support.so.0.1.debug...done. done. Loaded symbols for /lib64/libkrb5support.so.0 Reading symbols from /lib64/libdl.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libdl-2.17.so.debug...done. done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libkeyutils.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libkeyutils.so.1.5.debug...done. done. Loaded symbols for /lib64/libkeyutils.so.1 Reading symbols from /lib64/libresolv.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libresolv-2.17.so.debug...done. done. Loaded symbols for /lib64/libresolv.so.2 Reading symbols from /lib64/ld-linux-x86-64.so.2...Reading symbols from /usr/lib/debug/usr/lib64/ld-2.17.so.debug...done. done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libselinux.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libselinux.so.1.debug...done. done. Loaded symbols for /lib64/libselinux.so.1 Reading symbols from /lib64/libpcre.so.1...Reading symbols from /lib64/libpcre.so.1...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/libpcre.so.1 Reading symbols from /lib64/liblzma.so.5...Reading symbols from /lib64/liblzma.so.5...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/liblzma.so.5 Reading symbols from /usr/lib64/gssproxy/proxymech.so...Reading symbols from /usr/lib/debug/usr/lib64/gssproxy/proxymech.so.debug...done. done. Loaded symbols for /usr/lib64/gssproxy/proxymech.so Reading symbols from /lib64/libgssrpc.so.4...Reading symbols from /usr/lib/debug/usr/lib64/libgssrpc.so.4.2.debug...done. done. Loaded symbols for /lib64/libgssrpc.so.4 0x00007f4cd7ba4be9 in __GI_ppoll (fds=fds@entry=0x7f4cd9dc8b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffdd6f44770) at ../sysdeps/unix/sysv/linux/ppoll.c:51 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, _NSIG / 8); Missing separate debuginfos, use: debuginfo-install libtirpc-0.2.4-0.6.el7.x86_64 pcre-8.32-15.el7.x86_64 xz-libs-5.1.2-12alpha.el7.x86_64 (gdb) continue Continuing. Program received signal SIG37, Real-time event 37. 0x00007f4cd7ba4be9 in __GI_ppoll (fds=fds@entry=0x7f4cd9dc8b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffdd6f44770) at ../sysdeps/unix/sysv/linux/ppoll.c:51 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, _NSIG / 8); (gdb) bt #0 0x00007f4cd7ba4be9 in __GI_ppoll (fds=fds@entry=0x7f4cd9dc8b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffdd6f44770) at ../sysdeps/unix/sysv/linux/ppoll.c:51 #1 0x00007f4cd8c30587 in ppoll (__ss=0x7ffdd6f44770, __timeout=0x0, __nfds=1024, __fds=0x7f4cd9dc8b50) at /usr/include/bits/poll2.h:77 #2 gssd_poll (nfds=1024, fds=0x7f4cd9dc8b50) at gssd_main_loop.c:194 #3 gssd_run () at gssd_main_loop.c:258 #4 0x00007f4cd8c2f11a in main (argc=<optimized out>, argv=0x7ffdd6f449d8) at gssd.c:216 ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 16:57 ` Mark Valites @ 2016-03-08 18:21 ` Benjamin Coddington 2016-03-08 18:39 ` Mark Valites 0 siblings, 1 reply; 13+ messages in thread From: Benjamin Coddington @ 2016-03-08 18:21 UTC (permalink / raw) To: Mark Valites; +Cc: linux-nfs On Tue, 8 Mar 2016, Mark Valites wrote: > On 03/07/2016 02:49 PM, Benjamin Coddington wrote: > > > Best bet would be to attache a debugger to rpc.gssd and get a stack trace of > > it when it crashes. That will give us something to work from. > > > > You can do that with gdb -p <pid of gssd>. Something like `gdb -p $(pidof > > rpc.gssd)` will work -- then type "continue" to let the process continue to > > run. When it fails you can enter "bt" to emit a back trace. That > > information would be very helpful. > > Thank you for the gdb usage suggestion - I needed it... > > Here's the output: > > > GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-80.el7 > Copyright (C) 2013 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "x86_64-redhat-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>. > Attaching to process 492 > Reading symbols from /usr/sbin/rpc.gssd...Reading symbols from > /usr/lib/debug/usr/sbin/rpc.gssd.debug...done. > done. > Reading symbols from /lib64/libtirpc.so.1...Reading symbols from > /lib64/libtirpc.so.1...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/libtirpc.so.1 > Reading symbols from /lib64/libgssapi_krb5.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libgssapi_krb5.so.2.2.debug...done. > done. > Loaded symbols for /lib64/libgssapi_krb5.so.2 > Reading symbols from /lib64/libkrb5.so.3...Reading symbols from > /usr/lib/debug/usr/lib64/libkrb5.so.3.3.debug...done. > done. > Loaded symbols for /lib64/libkrb5.so.3 > Reading symbols from /lib64/libk5crypto.so.3...Reading symbols from > /usr/lib/debug/usr/lib64/libk5crypto.so.3.1.debug...done. > done. > Loaded symbols for /lib64/libk5crypto.so.3 > Reading symbols from /lib64/libcom_err.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libcom_err.so.2.1.debug...done. > done. > Loaded symbols for /lib64/libcom_err.so.2 > Reading symbols from /lib64/libc.so.6...Reading symbols from > /usr/lib/debug/usr/lib64/libc-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libc.so.6 > Reading symbols from /lib64/libnsl.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libnsl-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libnsl.so.1 > Reading symbols from /lib64/libpthread.so.0...Reading symbols from > /usr/lib/debug/usr/lib64/libpthread-2.17.so.debug...done. > done. > [Thread debugging using libthread_db enabled] > Using host libthread_db library "/lib64/libthread_db.so.1". > Loaded symbols for /lib64/libpthread.so.0 > Reading symbols from /lib64/libkrb5support.so.0...Reading symbols from > /usr/lib/debug/usr/lib64/libkrb5support.so.0.1.debug...done. > done. > Loaded symbols for /lib64/libkrb5support.so.0 > Reading symbols from /lib64/libdl.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libdl-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libdl.so.2 > Reading symbols from /lib64/libkeyutils.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libkeyutils.so.1.5.debug...done. > done. > Loaded symbols for /lib64/libkeyutils.so.1 > Reading symbols from /lib64/libresolv.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libresolv-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libresolv.so.2 > Reading symbols from /lib64/ld-linux-x86-64.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/ld-2.17.so.debug...done. > done. > Loaded symbols for /lib64/ld-linux-x86-64.so.2 > Reading symbols from /lib64/libselinux.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libselinux.so.1.debug...done. > done. > Loaded symbols for /lib64/libselinux.so.1 > Reading symbols from /lib64/libpcre.so.1...Reading symbols from > /lib64/libpcre.so.1...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/libpcre.so.1 > Reading symbols from /lib64/liblzma.so.5...Reading symbols from > /lib64/liblzma.so.5...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/liblzma.so.5 > Reading symbols from /usr/lib64/gssproxy/proxymech.so...Reading symbols from > /usr/lib/debug/usr/lib64/gssproxy/proxymech.so.debug...done. > done. > Loaded symbols for /usr/lib64/gssproxy/proxymech.so > Reading symbols from /lib64/libgssrpc.so.4...Reading symbols from > /usr/lib/debug/usr/lib64/libgssrpc.so.4.2.debug...done. > done. > Loaded symbols for /lib64/libgssrpc.so.4 > 0x00007f4cd7ba4be9 in __GI_ppoll (fds=fds@entry=0x7f4cd9dc8b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffdd6f44770) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, > _NSIG / 8); > Missing separate debuginfos, use: debuginfo-install > libtirpc-0.2.4-0.6.el7.x86_64 pcre-8.32-15.el7.x86_64 > xz-libs-5.1.2-12alpha.el7.x86_64 > (gdb) continue > Continuing. > > Program received signal SIG37, Real-time event 37. > 0x00007f4cd7ba4be9 in __GI_ppoll (fds=fds@entry=0x7f4cd9dc8b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffdd6f44770) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, > _NSIG / 8); > (gdb) bt > #0 0x00007f4cd7ba4be9 in __GI_ppoll (fds=fds@entry=0x7f4cd9dc8b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffdd6f44770) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > #1 0x00007f4cd8c30587 in ppoll (__ss=0x7ffdd6f44770, __timeout=0x0, > __nfds=1024, __fds=0x7f4cd9dc8b50) at /usr/include/bits/poll2.h:77 > #2 gssd_poll (nfds=1024, fds=0x7f4cd9dc8b50) at gssd_main_loop.c:194 > #3 gssd_run () at gssd_main_loop.c:258 > #4 0x00007f4cd8c2f11a in main (argc=<optimized out>, argv=0x7ffdd6f449d8) at > gssd.c:216 That's weird -- you're getting SIG37 - I don't know what that could be. Can you just do another 'continue' there? If not, can you do 'ptype $_siginfo' there? Ben ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 18:21 ` Benjamin Coddington @ 2016-03-08 18:39 ` Mark Valites 2016-03-08 19:07 ` Benjamin Coddington 0 siblings, 1 reply; 13+ messages in thread From: Mark Valites @ 2016-03-08 18:39 UTC (permalink / raw) To: linux-nfs On 03/08/2016 01:21 PM, Benjamin Coddington wrote: > That's weird -- you're getting SIG37 - I don't know what that could be. Can > you just do another 'continue' there? If not, can you do 'ptype $_siginfo' > there? Here's a new gdb session: GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-80.el7 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Attaching to process 464 Reading symbols from /usr/sbin/rpc.gssd...Reading symbols from /usr/lib/debug/usr/sbin/rpc.gssd.debug...done. done. Reading symbols from /lib64/libtirpc.so.1...Reading symbols from /lib64/libtirpc.so.1...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/libtirpc.so.1 Reading symbols from /lib64/libgssapi_krb5.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libgssapi_krb5.so.2.2.debug...done. done. Loaded symbols for /lib64/libgssapi_krb5.so.2 Reading symbols from /lib64/libkrb5.so.3...Reading symbols from /usr/lib/debug/usr/lib64/libkrb5.so.3.3.debug...done. done. Loaded symbols for /lib64/libkrb5.so.3 Reading symbols from /lib64/libk5crypto.so.3...Reading symbols from /usr/lib/debug/usr/lib64/libk5crypto.so.3.1.debug...done. done. Loaded symbols for /lib64/libk5crypto.so.3 Reading symbols from /lib64/libcom_err.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libcom_err.so.2.1.debug...done. done. Loaded symbols for /lib64/libcom_err.so.2 Reading symbols from /lib64/libc.so.6...Reading symbols from /usr/lib/debug/usr/lib64/libc-2.17.so.debug...done. done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/libnsl.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libnsl-2.17.so.debug...done. done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libpthread.so.0...Reading symbols from /usr/lib/debug/usr/lib64/libpthread-2.17.so.debug...done. done. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libkrb5support.so.0...Reading symbols from /usr/lib/debug/usr/lib64/libkrb5support.so.0.1.debug...done. done. Loaded symbols for /lib64/libkrb5support.so.0 Reading symbols from /lib64/libdl.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libdl-2.17.so.debug...done. done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libkeyutils.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libkeyutils.so.1.5.debug...done. done. Loaded symbols for /lib64/libkeyutils.so.1 Reading symbols from /lib64/libresolv.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libresolv-2.17.so.debug...done. done. Loaded symbols for /lib64/libresolv.so.2 Reading symbols from /lib64/ld-linux-x86-64.so.2...Reading symbols from /usr/lib/debug/usr/lib64/ld-2.17.so.debug...done. done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libselinux.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libselinux.so.1.debug...done. done. Loaded symbols for /lib64/libselinux.so.1 Reading symbols from /lib64/libpcre.so.1...Reading symbols from /lib64/libpcre.so.1...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/libpcre.so.1 Reading symbols from /lib64/liblzma.so.5...Reading symbols from /lib64/liblzma.so.5...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/liblzma.so.5 Reading symbols from /usr/lib64/gssproxy/proxymech.so...Reading symbols from /usr/lib/debug/usr/lib64/gssproxy/proxymech.so.debug...done. done. Loaded symbols for /usr/lib64/gssproxy/proxymech.so Reading symbols from /lib64/libgssrpc.so.4...Reading symbols from /usr/lib/debug/usr/lib64/libgssrpc.so.4.2.debug...done. done. Loaded symbols for /lib64/libgssrpc.so.4 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffd00c8b7d0) at ../sysdeps/unix/sysv/linux/ppoll.c:51 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, _NSIG / 8); Missing separate debuginfos, use: debuginfo-install libtirpc-0.2.4-0.6.el7.x86_64 pcre-8.32-15.el7.x86_64 xz-libs-5.1.2-12alpha.el7.x86_64 (gdb) continue Continuing. Program received signal SIG37, Real-time event 37. 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffd00c8b7d0) at ../sysdeps/unix/sysv/linux/ppoll.c:51 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, _NSIG / 8); (gdb) bt #0 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffd00c8b7d0) at ../sysdeps/unix/sysv/linux/ppoll.c:51 #1 0x00007f4c714ab587 in ppoll (__ss=0x7ffd00c8b7d0, __timeout=0x0, __nfds=1024, __fds=0x7f4c72c45b50) at /usr/include/bits/poll2.h:77 #2 gssd_poll (nfds=1024, fds=0x7f4c72c45b50) at gssd_main_loop.c:194 #3 gssd_run () at gssd_main_loop.c:258 #4 0x00007f4c714aa11a in main (argc=<optimized out>, argv=0x7ffd00c8ba38) at gssd.c:216 (gdb) continue Continuing. Program received signal SIG37, Real-time event 37. 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffd00c8b7d0) at ../sysdeps/unix/sysv/linux/ppoll.c:51 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, _NSIG / 8); (gdb) ptype $_siginfo type = struct { int si_signo; int si_errno; int si_code; union { int _pad __attribute__ ((vector_size(28))); struct {...} _kill; struct {...} _timer; struct {...} _rt; struct {...} _sigchld; struct {...} _sigfault; struct {...} _sigpoll; } _sifields; } In order to keep the gssd process alive (to be able to attach gbd to it), I've commented out my nfs mounts in vfstab & am then mounting the export manually: $ sudo mount /my/mountpoint Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-error-quark, 24) Failed to start rpc-statd.service: Connection timed out mount.nfs: access denied by server while mounting nfsserver:/the_export $ systemctl --failed UNIT LOAD ACTIVE SUB DESCRIPTION polkit.service loaded failed failed Authorization Manager I see now that when mounting manually this way, the gss daemon actually doesn't die. The rpc-statd process the mount whines about failing to start *is* running. -Mark ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 18:39 ` Mark Valites @ 2016-03-08 19:07 ` Benjamin Coddington 2016-03-08 19:30 ` Mark Valites 0 siblings, 1 reply; 13+ messages in thread From: Benjamin Coddington @ 2016-03-08 19:07 UTC (permalink / raw) To: Mark Valites; +Cc: linux-nfs On Tue, 8 Mar 2016, Mark Valites wrote: > On 03/08/2016 01:21 PM, Benjamin Coddington wrote: > > > That's weird -- you're getting SIG37 - I don't know what that could be. Can > > you just do another 'continue' there? If not, can you do 'ptype $_siginfo' > > there? > > Here's a new gdb session: > > GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-80.el7 > Copyright (C) 2013 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "x86_64-redhat-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>. > Attaching to process 464 > Reading symbols from /usr/sbin/rpc.gssd...Reading symbols from > /usr/lib/debug/usr/sbin/rpc.gssd.debug...done. > done. > Reading symbols from /lib64/libtirpc.so.1...Reading symbols from > /lib64/libtirpc.so.1...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/libtirpc.so.1 > Reading symbols from /lib64/libgssapi_krb5.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libgssapi_krb5.so.2.2.debug...done. > done. > Loaded symbols for /lib64/libgssapi_krb5.so.2 > Reading symbols from /lib64/libkrb5.so.3...Reading symbols from > /usr/lib/debug/usr/lib64/libkrb5.so.3.3.debug...done. > done. > Loaded symbols for /lib64/libkrb5.so.3 > Reading symbols from /lib64/libk5crypto.so.3...Reading symbols from > /usr/lib/debug/usr/lib64/libk5crypto.so.3.1.debug...done. > done. > Loaded symbols for /lib64/libk5crypto.so.3 > Reading symbols from /lib64/libcom_err.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libcom_err.so.2.1.debug...done. > done. > Loaded symbols for /lib64/libcom_err.so.2 > Reading symbols from /lib64/libc.so.6...Reading symbols from > /usr/lib/debug/usr/lib64/libc-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libc.so.6 > Reading symbols from /lib64/libnsl.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libnsl-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libnsl.so.1 > Reading symbols from /lib64/libpthread.so.0...Reading symbols from > /usr/lib/debug/usr/lib64/libpthread-2.17.so.debug...done. > done. > [Thread debugging using libthread_db enabled] > Using host libthread_db library "/lib64/libthread_db.so.1". > Loaded symbols for /lib64/libpthread.so.0 > Reading symbols from /lib64/libkrb5support.so.0...Reading symbols from > /usr/lib/debug/usr/lib64/libkrb5support.so.0.1.debug...done. > done. > Loaded symbols for /lib64/libkrb5support.so.0 > Reading symbols from /lib64/libdl.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libdl-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libdl.so.2 > Reading symbols from /lib64/libkeyutils.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libkeyutils.so.1.5.debug...done. > done. > Loaded symbols for /lib64/libkeyutils.so.1 > Reading symbols from /lib64/libresolv.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libresolv-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libresolv.so.2 > Reading symbols from /lib64/ld-linux-x86-64.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/ld-2.17.so.debug...done. > done. > Loaded symbols for /lib64/ld-linux-x86-64.so.2 > Reading symbols from /lib64/libselinux.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libselinux.so.1.debug...done. > done. > Loaded symbols for /lib64/libselinux.so.1 > Reading symbols from /lib64/libpcre.so.1...Reading symbols from > /lib64/libpcre.so.1...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/libpcre.so.1 > Reading symbols from /lib64/liblzma.so.5...Reading symbols from > /lib64/liblzma.so.5...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/liblzma.so.5 > Reading symbols from /usr/lib64/gssproxy/proxymech.so...Reading symbols from > /usr/lib/debug/usr/lib64/gssproxy/proxymech.so.debug...done. > done. > Loaded symbols for /usr/lib64/gssproxy/proxymech.so > Reading symbols from /lib64/libgssrpc.so.4...Reading symbols from > /usr/lib/debug/usr/lib64/libgssrpc.so.4.2.debug...done. > done. > Loaded symbols for /lib64/libgssrpc.so.4 > 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffd00c8b7d0) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, > _NSIG / 8); > Missing separate debuginfos, use: debuginfo-install > libtirpc-0.2.4-0.6.el7.x86_64 pcre-8.32-15.el7.x86_64 > xz-libs-5.1.2-12alpha.el7.x86_64 > (gdb) continue > Continuing. > > Program received signal SIG37, Real-time event 37. > 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffd00c8b7d0) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, > _NSIG / 8); > (gdb) bt > #0 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffd00c8b7d0) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > #1 0x00007f4c714ab587 in ppoll (__ss=0x7ffd00c8b7d0, __timeout=0x0, > __nfds=1024, __fds=0x7f4c72c45b50) at /usr/include/bits/poll2.h:77 > #2 gssd_poll (nfds=1024, fds=0x7f4c72c45b50) at gssd_main_loop.c:194 > #3 gssd_run () at gssd_main_loop.c:258 > #4 0x00007f4c714aa11a in main (argc=<optimized out>, argv=0x7ffd00c8ba38) at > gssd.c:216 > (gdb) continue > Continuing. > > Program received signal SIG37, Real-time event 37. > 0x00007f4c7041fbe9 in __GI_ppoll (fds=fds@entry=0x7f4c72c45b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffd00c8b7d0) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, > _NSIG / 8); > (gdb) ptype $_siginfo > type = struct { > int si_signo; > int si_errno; > int si_code; > union { > int _pad __attribute__ ((vector_size(28))); > struct {...} _kill; > struct {...} _timer; > struct {...} _rt; > struct {...} _sigchld; > struct {...} _sigfault; > struct {...} _sigpoll; > } _sifields; > } > > > In order to keep the gssd process alive (to be able to attach gbd to it), I've > commented out my nfs mounts in vfstab & am then mounting the export manually: > > $ sudo mount /my/mountpoint > Error getting authority: Error initializing authority: Error calling > StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached > (g-io-error-quark, 24) > Failed to start rpc-statd.service: Connection timed out > mount.nfs: access denied by server while mounting nfsserver:/the_export > > $ systemctl --failed > UNIT LOAD ACTIVE SUB DESCRIPTION > polkit.service loaded failed failed Authorization Manager > > > I see now that when mounting manually this way, the gss daemon actually > doesn't die. The rpc-statd process the mount whines about failing to start > *is* running. Before the first 'continue' use 'handle SIG37 nostop'.. Ben ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 19:07 ` Benjamin Coddington @ 2016-03-08 19:30 ` Mark Valites 2016-03-08 20:16 ` Benjamin Coddington 0 siblings, 1 reply; 13+ messages in thread From: Mark Valites @ 2016-03-08 19:30 UTC (permalink / raw) To: linux-nfs On 03/08/2016 02:07 PM, Benjamin Coddington wrote: > Before the first 'continue' use 'handle SIG37 nostop'.. I get a segfault that way: GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-80.el7 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Attaching to process 473 Reading symbols from /usr/sbin/rpc.gssd...Reading symbols from /usr/lib/debug/usr/sbin/rpc.gssd.debug...done. done. Reading symbols from /lib64/libtirpc.so.1...Reading symbols from /lib64/libtirpc.so.1...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/libtirpc.so.1 Reading symbols from /lib64/libgssapi_krb5.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libgssapi_krb5.so.2.2.debug...done. done. Loaded symbols for /lib64/libgssapi_krb5.so.2 Reading symbols from /lib64/libkrb5.so.3...Reading symbols from /usr/lib/debug/usr/lib64/libkrb5.so.3.3.debug...done. done. Loaded symbols for /lib64/libkrb5.so.3 Reading symbols from /lib64/libk5crypto.so.3...Reading symbols from /usr/lib/debug/usr/lib64/libk5crypto.so.3.1.debug...done. done. Loaded symbols for /lib64/libk5crypto.so.3 Reading symbols from /lib64/libcom_err.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libcom_err.so.2.1.debug...done. done. Loaded symbols for /lib64/libcom_err.so.2 Reading symbols from /lib64/libc.so.6...Reading symbols from /usr/lib/debug/usr/lib64/libc-2.17.so.debug...done. done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/libnsl.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libnsl-2.17.so.debug...done. done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libpthread.so.0...Reading symbols from /usr/lib/debug/usr/lib64/libpthread-2.17.so.debug...done. done. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libkrb5support.so.0...Reading symbols from /usr/lib/debug/usr/lib64/libkrb5support.so.0.1.debug...done. done. Loaded symbols for /lib64/libkrb5support.so.0 Reading symbols from /lib64/libdl.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libdl-2.17.so.debug...done. done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libkeyutils.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libkeyutils.so.1.5.debug...done. done. Loaded symbols for /lib64/libkeyutils.so.1 Reading symbols from /lib64/libresolv.so.2...Reading symbols from /usr/lib/debug/usr/lib64/libresolv-2.17.so.debug...done. done. Loaded symbols for /lib64/libresolv.so.2 Reading symbols from /lib64/ld-linux-x86-64.so.2...Reading symbols from /usr/lib/debug/usr/lib64/ld-2.17.so.debug...done. done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libselinux.so.1...Reading symbols from /usr/lib/debug/usr/lib64/libselinux.so.1.debug...done. done. Loaded symbols for /lib64/libselinux.so.1 Reading symbols from /lib64/libpcre.so.1...Reading symbols from /lib64/libpcre.so.1...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/libpcre.so.1 Reading symbols from /lib64/liblzma.so.5...Reading symbols from /lib64/liblzma.so.5...(no debugging symbols found)...done. (no debugging symbols found)...done. Loaded symbols for /lib64/liblzma.so.5 Reading symbols from /usr/lib64/gssproxy/proxymech.so...Reading symbols from /usr/lib/debug/usr/lib64/gssproxy/proxymech.so.debug...done. done. Loaded symbols for /usr/lib64/gssproxy/proxymech.so Reading symbols from /lib64/libgssrpc.so.4...Reading symbols from /usr/lib/debug/usr/lib64/libgssrpc.so.4.2.debug...done. done. Loaded symbols for /lib64/libgssrpc.so.4 0x00007ff64f5a6be9 in __GI_ppoll (fds=fds@entry=0x7ff6518b8b50, nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, sigmask=sigmask@entry=0x7ffce9f91570) at ../sysdeps/unix/sysv/linux/ppoll.c:51 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, _NSIG / 8); Missing separate debuginfos, use: debuginfo-install libtirpc-0.2.4-0.6.el7.x86_64 pcre-8.32-15.el7.x86_64 xz-libs-5.1.2-12alpha.el7.x86_64 (gdb) handle SIG37 nostop Signal Stop Print Pass to program Description SIG37 No Yes Yes Real-time event 37 (gdb) continue Continuing. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIGSEGV, Segmentation fault. __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:212 212 movlpd (%rdi), %xmm1 (gdb) continue Continuing. Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. (gdb) ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 19:30 ` Mark Valites @ 2016-03-08 20:16 ` Benjamin Coddington 2016-03-08 20:27 ` Mark Valites 0 siblings, 1 reply; 13+ messages in thread From: Benjamin Coddington @ 2016-03-08 20:16 UTC (permalink / raw) To: Mark Valites; +Cc: linux-nfs On Tue, 8 Mar 2016, Mark Valites wrote: > On 03/08/2016 02:07 PM, Benjamin Coddington wrote: > > > Before the first 'continue' use 'handle SIG37 nostop'.. > > I get a segfault that way: > > GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-80.el7 > Copyright (C) 2013 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "x86_64-redhat-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>. > Attaching to process 473 > Reading symbols from /usr/sbin/rpc.gssd...Reading symbols from > /usr/lib/debug/usr/sbin/rpc.gssd.debug...done. > done. > Reading symbols from /lib64/libtirpc.so.1...Reading symbols from > /lib64/libtirpc.so.1...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/libtirpc.so.1 > Reading symbols from /lib64/libgssapi_krb5.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libgssapi_krb5.so.2.2.debug...done. > done. > Loaded symbols for /lib64/libgssapi_krb5.so.2 > Reading symbols from /lib64/libkrb5.so.3...Reading symbols from > /usr/lib/debug/usr/lib64/libkrb5.so.3.3.debug...done. > done. > Loaded symbols for /lib64/libkrb5.so.3 > Reading symbols from /lib64/libk5crypto.so.3...Reading symbols from > /usr/lib/debug/usr/lib64/libk5crypto.so.3.1.debug...done. > done. > Loaded symbols for /lib64/libk5crypto.so.3 > Reading symbols from /lib64/libcom_err.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libcom_err.so.2.1.debug...done. > done. > Loaded symbols for /lib64/libcom_err.so.2 > Reading symbols from /lib64/libc.so.6...Reading symbols from > /usr/lib/debug/usr/lib64/libc-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libc.so.6 > Reading symbols from /lib64/libnsl.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libnsl-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libnsl.so.1 > Reading symbols from /lib64/libpthread.so.0...Reading symbols from > /usr/lib/debug/usr/lib64/libpthread-2.17.so.debug...done. > done. > [Thread debugging using libthread_db enabled] > Using host libthread_db library "/lib64/libthread_db.so.1". > Loaded symbols for /lib64/libpthread.so.0 > Reading symbols from /lib64/libkrb5support.so.0...Reading symbols from > /usr/lib/debug/usr/lib64/libkrb5support.so.0.1.debug...done. > done. > Loaded symbols for /lib64/libkrb5support.so.0 > Reading symbols from /lib64/libdl.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libdl-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libdl.so.2 > Reading symbols from /lib64/libkeyutils.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libkeyutils.so.1.5.debug...done. > done. > Loaded symbols for /lib64/libkeyutils.so.1 > Reading symbols from /lib64/libresolv.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/libresolv-2.17.so.debug...done. > done. > Loaded symbols for /lib64/libresolv.so.2 > Reading symbols from /lib64/ld-linux-x86-64.so.2...Reading symbols from > /usr/lib/debug/usr/lib64/ld-2.17.so.debug...done. > done. > Loaded symbols for /lib64/ld-linux-x86-64.so.2 > Reading symbols from /lib64/libselinux.so.1...Reading symbols from > /usr/lib/debug/usr/lib64/libselinux.so.1.debug...done. > done. > Loaded symbols for /lib64/libselinux.so.1 > Reading symbols from /lib64/libpcre.so.1...Reading symbols from > /lib64/libpcre.so.1...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/libpcre.so.1 > Reading symbols from /lib64/liblzma.so.5...Reading symbols from > /lib64/liblzma.so.5...(no debugging symbols found)...done. > (no debugging symbols found)...done. > Loaded symbols for /lib64/liblzma.so.5 > Reading symbols from /usr/lib64/gssproxy/proxymech.so...Reading symbols from > /usr/lib/debug/usr/lib64/gssproxy/proxymech.so.debug...done. > done. > Loaded symbols for /usr/lib64/gssproxy/proxymech.so > Reading symbols from /lib64/libgssrpc.so.4...Reading symbols from > /usr/lib/debug/usr/lib64/libgssrpc.so.4.2.debug...done. > done. > Loaded symbols for /lib64/libgssrpc.so.4 > 0x00007ff64f5a6be9 in __GI_ppoll (fds=fds@entry=0x7ff6518b8b50, > nfds=nfds@entry=1024, timeout=<optimized out>, timeout@entry=0x0, > sigmask=sigmask@entry=0x7ffce9f91570) > at ../sysdeps/unix/sysv/linux/ppoll.c:51 > 51 result = INLINE_SYSCALL (ppoll, 5, fds, nfds, timeout, sigmask, > _NSIG / 8); > Missing separate debuginfos, use: debuginfo-install > libtirpc-0.2.4-0.6.el7.x86_64 pcre-8.32-15.el7.x86_64 > xz-libs-5.1.2-12alpha.el7.x86_64 > (gdb) handle SIG37 nostop > Signal Stop Print Pass to program Description > SIG37 No Yes Yes Real-time event 37 > (gdb) continue > Continuing. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIGSEGV, Segmentation fault. > __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:212 > 212 movlpd (%rdi), %xmm1 > (gdb) continue > Continuing. That's where we want the backtrace; that's when you should do 'bt'. Feel free to leave out everything else. I think these SIG37s are somehow the DNOTIFY_SIGNAL, though they should be SIG35 (SIGRTMIN + 3), not 37. Ben ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 20:16 ` Benjamin Coddington @ 2016-03-08 20:27 ` Mark Valites 2016-03-08 20:37 ` Benjamin Coddington 0 siblings, 1 reply; 13+ messages in thread From: Mark Valites @ 2016-03-08 20:27 UTC (permalink / raw) To: linux-nfs On 03/08/2016 03:16 PM, Benjamin Coddington wrote: > That's where we want the backtrace; that's when you should do 'bt'. Feel > free to leave out everything else. Wow - Sorry about that. (gdb) handle SIG37 nostop Signal Stop Print Pass to program Description SIG37 No Yes Yes Real-time event 37 (gdb) continue Continuing. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIG37, Real-time event 37. Program received signal SIGSEGV, Segmentation fault. __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:212 212 movlpd (%rdi), %xmm1 (gdb) bt #0 __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:212 #1 0x00007fec0dfb60f4 in find_keytab_entry (context=0x7fec0f82d6d0, kt=0x7fec0f829a10, tgtname=tgtname@entry=0x7fec0f829910 "ubfs1.itorg.ad.buffalo.edu", kte=kte@entry=0x7fffc8ca1ec0, svcnames=svcnames@entry=0x7fffc8ca1e90) at krb5_util.c:894 #2 0x00007fec0dfb6ded in gssd_refresh_krb5_machine_credential (hostname=0x7fec0f829910 "ubfs1.itorg.ad.buffalo.edu", ple=ple@entry=0x0, service=service@entry=0x0) at krb5_util.c:1311 #3 0x00007fec0dfb4030 in krb5_use_machine_creds (clp=clp@entry=0x7fec0f82bcb0, uid=uid@entry=0, tgtname=tgtname@entry=0x0, service=service@entry=0x0, rpc_clnt=rpc_clnt@entry=0x7fffc8ca2000) at gssd_proc.c:1086 #4 0x00007fec0dfb4416 in process_krb5_upcall (clp=clp@entry=0x7fec0f82bcb0, uid=0, fd=13, tgtname=tgtname@entry=0x0, service=service@entry=0x0) at gssd_proc.c:1222 #5 0x00007fec0dfb4d03 in handle_gssd_upcall (clp=clp@entry=0x7fec0f82bcb0) at gssd_proc.c:1413 #6 0x00007fec0dfb264e in scan_poll_results (ret=1) at gssd_main_loop.c:85 #7 gssd_poll (nfds=<optimized out>, fds=<optimized out>) at gssd_main_loop.c:201 #8 gssd_run () at gssd_main_loop.c:258 #9 0x00007fec0dfb111a in main (argc=<optimized out>, argv=0x7fffc8ca2418) at gssd.c:216 (gdb) continue Continuing. Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. (gdb) FWIW, the ubfs1.itorg.ad.buffalo.edu hostname mentioned in the backtrace is the nfs server. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 20:27 ` Mark Valites @ 2016-03-08 20:37 ` Benjamin Coddington 2016-03-08 20:51 ` Mark Valites 0 siblings, 1 reply; 13+ messages in thread From: Benjamin Coddington @ 2016-03-08 20:37 UTC (permalink / raw) To: Mark Valites; +Cc: linux-nfs On Tue, 8 Mar 2016, Mark Valites wrote: > On 03/08/2016 03:16 PM, Benjamin Coddington wrote: > > > That's where we want the backtrace; that's when you should do 'bt'. Feel > > free to leave out everything else. > > Wow - Sorry about that. > > (gdb) handle SIG37 nostop > Signal Stop Print Pass to program Description > SIG37 No Yes Yes Real-time event 37 > (gdb) continue > Continuing. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIG37, Real-time event 37. > > Program received signal SIGSEGV, Segmentation fault. > __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:212 > 212 movlpd (%rdi), %xmm1 > (gdb) bt > #0 __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:212 > #1 0x00007fec0dfb60f4 in find_keytab_entry (context=0x7fec0f82d6d0, > kt=0x7fec0f829a10, tgtname=tgtname@entry=0x7fec0f829910 > "ubfs1.itorg.ad.buffalo.edu", > kte=kte@entry=0x7fffc8ca1ec0, svcnames=svcnames@entry=0x7fffc8ca1e90) at > krb5_util.c:894 > #2 0x00007fec0dfb6ded in gssd_refresh_krb5_machine_credential > (hostname=0x7fec0f829910 "ubfs1.itorg.ad.buffalo.edu", ple=ple@entry=0x0, > service=service@entry=0x0) > at krb5_util.c:1311 > #3 0x00007fec0dfb4030 in krb5_use_machine_creds > (clp=clp@entry=0x7fec0f82bcb0, uid=uid@entry=0, tgtname=tgtname@entry=0x0, > service=service@entry=0x0, > rpc_clnt=rpc_clnt@entry=0x7fffc8ca2000) at gssd_proc.c:1086 > #4 0x00007fec0dfb4416 in process_krb5_upcall (clp=clp@entry=0x7fec0f82bcb0, > uid=0, fd=13, tgtname=tgtname@entry=0x0, service=service@entry=0x0) at > gssd_proc.c:1222 > #5 0x00007fec0dfb4d03 in handle_gssd_upcall (clp=clp@entry=0x7fec0f82bcb0) at > gssd_proc.c:1413 > #6 0x00007fec0dfb264e in scan_poll_results (ret=1) at gssd_main_loop.c:85 > #7 gssd_poll (nfds=<optimized out>, fds=<optimized out>) at > gssd_main_loop.c:201 > #8 gssd_run () at gssd_main_loop.c:258 > #9 0x00007fec0dfb111a in main (argc=<optimized out>, argv=0x7fffc8ca2418) at > gssd.c:216 > (gdb) continue > Continuing. > > Program terminated with signal SIGSEGV, Segmentation fault. > The program no longer exists. > (gdb) > > FWIW, the ubfs1.itorg.ad.buffalo.edu hostname mentioned in the backtrace is > the nfs server. OK, that's pretty certainly this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1313090 You can add your email to the CC list there, and leave a comment stating you're hitting it as well. If you have Red Hat support, you can open a support case. The patch in that BZ should fix it up for you, or you can use the previous nfs-utils version until that BZ changes to CLOSED, at which time a fixed nfs-utils pacakge will be available. Nice job working through gdb over email, and sorry for the trouble. Ben ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: RH 7 nfs-utils update causes segfault 2016-03-08 20:37 ` Benjamin Coddington @ 2016-03-08 20:51 ` Mark Valites 0 siblings, 0 replies; 13+ messages in thread From: Mark Valites @ 2016-03-08 20:51 UTC (permalink / raw) To: linux-nfs On Mar 8, 2016, at 3:37 PM, Benjamin Coddington wrote: > OK, that's pretty certainly this bug: > https://bugzilla.redhat.com/show_bug.cgi?id=1313090 > > You can add your email to the CC list there, and leave a comment stating > you're hitting it as well. Done. > If you have Red Hat support, you can open a support case. Although I know I specifically mentioned RHEL 7 originally, we're actually now an Oracle Linux shop (sorry...) - does opening a case with Oracle help at all? (I'm actually not 100% sure we have support with them either though.) > The patch in that BZ should fix it up for you, or you can use the previous > nfs-utils version until that BZ changes to CLOSED, at which time a fixed > nfs-utils pacakge will be available. > > Nice job working through gdb over email, and sorry for the trouble. Thank you for your patience & walking me through it. I haven't touched gdb since college & they don't let me drink at work like I surely did last time I used it... I'll probably stay at the previous nfs-utils version until a patch comes out & trickles down to Oracle Linux. Thanks again! -Mark ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-03-08 20:51 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-03-07 15:48 RH 7 nfs-utils update causes Mark Valites 2016-03-07 16:00 ` Benjamin Coddington 2016-03-07 16:27 ` RH 7 nfs-utils update causes segfault Mark Valites 2016-03-07 19:49 ` Benjamin Coddington 2016-03-08 16:57 ` Mark Valites 2016-03-08 18:21 ` Benjamin Coddington 2016-03-08 18:39 ` Mark Valites 2016-03-08 19:07 ` Benjamin Coddington 2016-03-08 19:30 ` Mark Valites 2016-03-08 20:16 ` Benjamin Coddington 2016-03-08 20:27 ` Mark Valites 2016-03-08 20:37 ` Benjamin Coddington 2016-03-08 20:51 ` Mark Valites
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.