All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: Geoff Levand <geoff@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	marc.zyngier@arm.com, Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	AKASHI Takahiro <takahiro.akashi@linaro.org>,
	kexec@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v14 12/20] arm64/kexec: Add core kexec support
Date: Fri, 11 Mar 2016 11:37:54 +0000	[thread overview]
Message-ID: <56E2AE12.4020604@arm.com> (raw)
In-Reply-To: <cdab8a2001a9f8beb605bfcd565201c37dad78e6.1457135058.git.geoff@infradead.org>

Hi Geoff,

On 04/03/16 23:51, Geoff Levand wrote:
> Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the
> arm64 architecture that add support for the kexec re-boot mechanism
> (CONFIG_KEXEC) on arm64 platforms.
> 
> Signed-off-by: Geoff Levand <geoff@infradead.org>

> diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
> new file mode 100644
> index 0000000..6fd0f0c
> --- /dev/null
> +++ b/arch/arm64/kernel/machine_kexec.c

[ ... snip ... ]

> +/**
> + * kexec_list_flush - Helper to flush the kimage list to PoC.
> + */
> +static void kexec_list_flush(struct kimage *kimage)
> +{
> +	kimage_entry_t *entry;
> +	unsigned int flag;
> +
> +	for (entry = &kimage->head, flag = 0; flag != IND_DONE; entry++) {
> +		void *addr = kmap(phys_to_page(*entry & PAGE_MASK));

Isn't kmap() only needed for highmem? All memory should be accessible via the
linear map, so this could just be a call to phys_to_virt(), without the
intermediate page step.


> +
> +		flag = *entry & IND_FLAGS;
> +
> +		switch (flag) {
> +		case IND_INDIRECTION:
> +			entry = (kimage_entry_t *)addr - 1;
> +			__flush_dcache_area(addr, PAGE_SIZE);
> +			break;
> +		case IND_DESTINATION:
> +			break;
> +		case IND_SOURCE:
> +			__flush_dcache_area(addr, PAGE_SIZE);
> +			break;
> +		case IND_DONE:
> +			break;
> +		default:
> +			BUG();
> +		}
> +		kunmap(addr);
> +	}
> +}
> +
> +/**
> + * kexec_segment_flush - Helper to flush the kimage segments to PoC.
> + */
> +static void kexec_segment_flush(const struct kimage *kimage)
> +{
> +	unsigned long i;
> +
> +	pr_devel("%s:\n", __func__);
> +
> +	for (i = 0; i < kimage->nr_segments; i++) {
> +		pr_devel("  segment[%lu]: %016lx - %016lx, %lx bytes, %lu pages\n",
> +			i,
> +			kimage->segment[i].mem,
> +			kimage->segment[i].mem + kimage->segment[i].memsz,
> +			kimage->segment[i].memsz,
> +			kimage->segment[i].memsz /  PAGE_SIZE);
> +
> +		__flush_dcache_area(phys_to_virt(kimage->segment[i].mem),
> +			kimage->segment[i].memsz);
> +	}
> +}
> +
> +/**
> + * machine_kexec - Do the kexec reboot.
> + *
> + * Called from the core kexec code for a sys_reboot with LINUX_REBOOT_CMD_KEXEC.
> + */
> +void machine_kexec(struct kimage *kimage)
> +{
> +	phys_addr_t reboot_code_buffer_phys;
> +	void *reboot_code_buffer;
> +
> +	BUG_ON(num_online_cpus() > 1);
> +
> +	reboot_code_buffer_phys = page_to_phys(kimage->control_code_page);
> +	reboot_code_buffer = kmap(kimage->control_code_page);

page_address()?


> +
> +	/*
> +	 * Copy arm64_relocate_new_kernel to the reboot_code_buffer for use
> +	 * after the kernel is shut down.
> +	 */
> +	memcpy(reboot_code_buffer, arm64_relocate_new_kernel,
> +		arm64_relocate_new_kernel_size);
> +
> +	/* Flush the reboot_code_buffer in preparation for its execution. */
> +	__flush_dcache_area(reboot_code_buffer, arm64_relocate_new_kernel_size);
> +	flush_icache_range((uintptr_t)reboot_code_buffer,
> +		arm64_relocate_new_kernel_size);
> +
> +	/* Flush the kimage list. */
> +	kexec_list_flush(kimage);
> +
> +	/* Flush the new image if already in place. */
> +	if (kimage->head & IND_DONE)
> +		kexec_segment_flush(kimage);
> +
> +	pr_info("Bye!\n");
> +
> +	/* Disable all DAIF exceptions. */
> +	asm volatile ("msr daifset, #0xf" : : : "memory");
> +
> +	cpu_install_idmap();
> +
> +	/*
> +	 * cpu_soft_restart will shutdown the MMU, disable data caches, then
> +	 * transfer control to the reboot_code_buffer which contains a copy of
> +	 * the arm64_relocate_new_kernel routine.  arm64_relocate_new_kernel
> +	 * uses physical addressing to relocate the new image to its final
> +	 * position and transfers control to the image entry point when the
> +	 * relocation is complete.
> +	 */
> +
> +	cpu_soft_restart(is_hyp_mode_available(),
> +		reboot_code_buffer_phys, kimage->head, kimage_start, 0);
> +
> +	BUG(); /* Should never get here. */
> +}
> +
> +void machine_crash_shutdown(struct pt_regs *regs)
> +{
> +	/* Empty routine needed to avoid build errors. */
> +}

Thanks!

James

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

WARNING: multiple messages have this Message-ID (diff)
From: james.morse@arm.com (James Morse)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v14 12/20] arm64/kexec: Add core kexec support
Date: Fri, 11 Mar 2016 11:37:54 +0000	[thread overview]
Message-ID: <56E2AE12.4020604@arm.com> (raw)
In-Reply-To: <cdab8a2001a9f8beb605bfcd565201c37dad78e6.1457135058.git.geoff@infradead.org>

Hi Geoff,

On 04/03/16 23:51, Geoff Levand wrote:
> Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the
> arm64 architecture that add support for the kexec re-boot mechanism
> (CONFIG_KEXEC) on arm64 platforms.
> 
> Signed-off-by: Geoff Levand <geoff@infradead.org>

> diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
> new file mode 100644
> index 0000000..6fd0f0c
> --- /dev/null
> +++ b/arch/arm64/kernel/machine_kexec.c

[ ... snip ... ]

> +/**
> + * kexec_list_flush - Helper to flush the kimage list to PoC.
> + */
> +static void kexec_list_flush(struct kimage *kimage)
> +{
> +	kimage_entry_t *entry;
> +	unsigned int flag;
> +
> +	for (entry = &kimage->head, flag = 0; flag != IND_DONE; entry++) {
> +		void *addr = kmap(phys_to_page(*entry & PAGE_MASK));

Isn't kmap() only needed for highmem? All memory should be accessible via the
linear map, so this could just be a call to phys_to_virt(), without the
intermediate page step.


> +
> +		flag = *entry & IND_FLAGS;
> +
> +		switch (flag) {
> +		case IND_INDIRECTION:
> +			entry = (kimage_entry_t *)addr - 1;
> +			__flush_dcache_area(addr, PAGE_SIZE);
> +			break;
> +		case IND_DESTINATION:
> +			break;
> +		case IND_SOURCE:
> +			__flush_dcache_area(addr, PAGE_SIZE);
> +			break;
> +		case IND_DONE:
> +			break;
> +		default:
> +			BUG();
> +		}
> +		kunmap(addr);
> +	}
> +}
> +
> +/**
> + * kexec_segment_flush - Helper to flush the kimage segments to PoC.
> + */
> +static void kexec_segment_flush(const struct kimage *kimage)
> +{
> +	unsigned long i;
> +
> +	pr_devel("%s:\n", __func__);
> +
> +	for (i = 0; i < kimage->nr_segments; i++) {
> +		pr_devel("  segment[%lu]: %016lx - %016lx, %lx bytes, %lu pages\n",
> +			i,
> +			kimage->segment[i].mem,
> +			kimage->segment[i].mem + kimage->segment[i].memsz,
> +			kimage->segment[i].memsz,
> +			kimage->segment[i].memsz /  PAGE_SIZE);
> +
> +		__flush_dcache_area(phys_to_virt(kimage->segment[i].mem),
> +			kimage->segment[i].memsz);
> +	}
> +}
> +
> +/**
> + * machine_kexec - Do the kexec reboot.
> + *
> + * Called from the core kexec code for a sys_reboot with LINUX_REBOOT_CMD_KEXEC.
> + */
> +void machine_kexec(struct kimage *kimage)
> +{
> +	phys_addr_t reboot_code_buffer_phys;
> +	void *reboot_code_buffer;
> +
> +	BUG_ON(num_online_cpus() > 1);
> +
> +	reboot_code_buffer_phys = page_to_phys(kimage->control_code_page);
> +	reboot_code_buffer = kmap(kimage->control_code_page);

page_address()?


> +
> +	/*
> +	 * Copy arm64_relocate_new_kernel to the reboot_code_buffer for use
> +	 * after the kernel is shut down.
> +	 */
> +	memcpy(reboot_code_buffer, arm64_relocate_new_kernel,
> +		arm64_relocate_new_kernel_size);
> +
> +	/* Flush the reboot_code_buffer in preparation for its execution. */
> +	__flush_dcache_area(reboot_code_buffer, arm64_relocate_new_kernel_size);
> +	flush_icache_range((uintptr_t)reboot_code_buffer,
> +		arm64_relocate_new_kernel_size);
> +
> +	/* Flush the kimage list. */
> +	kexec_list_flush(kimage);
> +
> +	/* Flush the new image if already in place. */
> +	if (kimage->head & IND_DONE)
> +		kexec_segment_flush(kimage);
> +
> +	pr_info("Bye!\n");
> +
> +	/* Disable all DAIF exceptions. */
> +	asm volatile ("msr daifset, #0xf" : : : "memory");
> +
> +	cpu_install_idmap();
> +
> +	/*
> +	 * cpu_soft_restart will shutdown the MMU, disable data caches, then
> +	 * transfer control to the reboot_code_buffer which contains a copy of
> +	 * the arm64_relocate_new_kernel routine.  arm64_relocate_new_kernel
> +	 * uses physical addressing to relocate the new image to its final
> +	 * position and transfers control to the image entry point when the
> +	 * relocation is complete.
> +	 */
> +
> +	cpu_soft_restart(is_hyp_mode_available(),
> +		reboot_code_buffer_phys, kimage->head, kimage_start, 0);
> +
> +	BUG(); /* Should never get here. */
> +}
> +
> +void machine_crash_shutdown(struct pt_regs *regs)
> +{
> +	/* Empty routine needed to avoid build errors. */
> +}

Thanks!

James

  reply	other threads:[~2016-03-11 11:37 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-04 23:51 [PATCH v14 00/20] arm64 kexec kernel patches v14 Geoff Levand
2016-03-04 23:51 ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 01/20] arm64: Fold proc-macros.S into assembler.h Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 10/20] Revert "arm64: mm: remove unused cpu_set_idmap_tcr_t0sz function" Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 08/20] arm64: Add new asm macro copy_page Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 06/20] arm64: kernel: Include _AC definition in page.h Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 05/20] arm64: kvm: allows kvm cpu hotplug Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 12/20] arm64/kexec: Add core kexec support Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-11 11:37   ` James Morse [this message]
2016-03-11 11:37     ` James Morse
2016-03-04 23:51 ` [PATCH v14 03/20] arm64: Convert hcalls to use HVC immediate value Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 04/20] arm64: Add new hcall HVC_CALL_FUNC Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 09/20] arm64: Add back cpu_reset routines Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 02/20] arm64: Cleanup SCTLR flags Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 07/20] arm64: Promote KERNEL_START/KERNEL_END definitions to a header file Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 11/20] Revert "arm64: remove dead code" Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 16/20] arm64: limit memory regions based on DT property, usable-memory Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 15/20] arm64: kdump: reserve memory for crash dump kernel Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 14/20] arm64/kexec: Add pr_debug output Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-11 11:39   ` James Morse
2016-03-11 11:39     ` James Morse
2016-03-04 23:51 ` [PATCH v14 20/20] arm64: kdump: update a kernel doc Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 18/20] arm64: kdump: add kdump support Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 17/20] arm64: kdump: implement machine_crash_shutdown() Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 13/20] arm64/kexec: Enable kexec in the arm64 defconfig Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-04 23:51 ` [PATCH v14 19/20] arm64: kdump: enable kdump " Geoff Levand
2016-03-04 23:51   ` Geoff Levand
2016-03-07 22:25 ` [PATCH v14 00/20] arm64 kexec kernel patches v14 Azriel Samson
2016-03-07 22:25   ` Azriel Samson
2016-03-07 23:35   ` Geoff Levand
2016-03-07 23:35     ` Geoff Levand
2016-03-08  0:23     ` AKASHI Takahiro
2016-03-08  0:23       ` AKASHI Takahiro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56E2AE12.4020604@arm.com \
    --to=james.morse@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=geoff@infradead.org \
    --cc=kexec@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=takahiro.akashi@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.