All of lore.kernel.org
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] Re: [PATCH 1/2] regulator: axp20x: Fix axp22x ldo_io voltage ranges
Date: Thu, 17 Mar 2016 19:51:42 +0100	[thread overview]
Message-ID: <56EAFCBE.3060308@redhat.com> (raw)
In-Reply-To: <CAGb2v67vsbH1-Vq_G_C=t3CCBFBaS1RCZc4ggqhoyjj7F_Hgaw@mail.gmail.com>

Hi,

On 14-03-16 07:59, Chen-Yu Tsai wrote:
> On Sat, Mar 12, 2016 at 4:12 AM, Hans de Goede <hdegoede@redhat.com> wrote:
>> The minium voltage of 1800mV is a copy and paste error from the axp20x
>> regulator info. The correct minimum voltage for the ldo_io regulators
>> on the axp22x is 700mV.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Fixes: 1b82b4e4f954 ("regulator: axp20x: Add support for AXP22X regulators")
>
> then
>
> Acked-by: Chen-Yu Tsai <wens@csie.org>

Thanks, I'll send a v2 with the fixes tags and your acked-by.

> Also, this bug has been in since v4.2. Should we mark it for stable?

Nothing is using it, I found out because I've a group of students
from my local university working on a gsl1680 driver, and one of
the a23 q8 tablets I've used ldoio1 to power the touchscreen
controller.

But that is not upstream yet, so nothing uses it, and thus I
see no reason for a Cc: stable.

Regards,

Hans



>
> Regards
> ChenYu
>
>
>> ---
>>   drivers/regulator/axp20x-regulator.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
>> index 40cd894..0c0e7a3 100644
>> --- a/drivers/regulator/axp20x-regulator.c
>> +++ b/drivers/regulator/axp20x-regulator.c
>> @@ -215,10 +215,10 @@ static const struct regulator_desc axp22x_regulators[] = {
>>                   AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
>>          AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
>>                   AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
>> -       AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100,
>> +       AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
>>                      AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
>>                      AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
>> -       AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100,
>> +       AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
>>                      AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
>>                      AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
>>          AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
>> --
>> 2.7.2
>>

WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Mark Brown <broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-arm-kernel
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
Subject: Re: [linux-sunxi] Re: [PATCH 1/2] regulator: axp20x: Fix axp22x ldo_io voltage ranges
Date: Thu, 17 Mar 2016 19:51:42 +0100	[thread overview]
Message-ID: <56EAFCBE.3060308@redhat.com> (raw)
In-Reply-To: <CAGb2v67vsbH1-Vq_G_C=t3CCBFBaS1RCZc4ggqhoyjj7F_Hgaw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

Hi,

On 14-03-16 07:59, Chen-Yu Tsai wrote:
> On Sat, Mar 12, 2016 at 4:12 AM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
>> The minium voltage of 1800mV is a copy and paste error from the axp20x
>> regulator info. The correct minimum voltage for the ldo_io regulators
>> on the axp22x is 700mV.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>
> Fixes: 1b82b4e4f954 ("regulator: axp20x: Add support for AXP22X regulators")
>
> then
>
> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>

Thanks, I'll send a v2 with the fixes tags and your acked-by.

> Also, this bug has been in since v4.2. Should we mark it for stable?

Nothing is using it, I found out because I've a group of students
from my local university working on a gsl1680 driver, and one of
the a23 q8 tablets I've used ldoio1 to power the touchscreen
controller.

But that is not upstream yet, so nothing uses it, and thus I
see no reason for a Cc: stable.

Regards,

Hans



>
> Regards
> ChenYu
>
>
>> ---
>>   drivers/regulator/axp20x-regulator.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
>> index 40cd894..0c0e7a3 100644
>> --- a/drivers/regulator/axp20x-regulator.c
>> +++ b/drivers/regulator/axp20x-regulator.c
>> @@ -215,10 +215,10 @@ static const struct regulator_desc axp22x_regulators[] = {
>>                   AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
>>          AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
>>                   AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
>> -       AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100,
>> +       AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
>>                      AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
>>                      AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
>> -       AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100,
>> +       AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
>>                      AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
>>                      AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
>>          AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
>> --
>> 2.7.2
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2016-03-17 18:51 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-11 20:12 [PATCH 1/2] regulator: axp20x: Fix axp22x ldo_io voltage ranges Hans de Goede
2016-03-11 20:12 ` Hans de Goede
2016-03-11 20:12 ` [PATCH 2/2] regulator: axp20x: Fix axp22x ldo_io registration error on cold boot Hans de Goede
2016-03-11 20:12   ` Hans de Goede
2016-03-14  6:59 ` [PATCH 1/2] regulator: axp20x: Fix axp22x ldo_io voltage ranges Chen-Yu Tsai
2016-03-14  6:59   ` Chen-Yu Tsai
2016-03-17 18:51   ` Hans de Goede [this message]
2016-03-17 18:51     ` [linux-sunxi] " Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56EAFCBE.3060308@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.