From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91/dt: sama5d4 xplained: don't disable hsmci regulator
Date: Tue, 22 Mar 2016 11:55:19 +0100 [thread overview]
Message-ID: <56F12497.8080602@atmel.com> (raw)
In-Reply-To: <1457692516-3151-1-git-send-email-ludovic.desroches@atmel.com>
Le 11/03/2016 11:35, Ludovic Desroches a ?crit :
> If enabling the hsmci regulator on card detection, the board can reboot
> on sd card insertion. Keeping the regulator always enabled fixes this
> issue.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Fixes: 8d545f32bd77 ("ARM: at91/dt: sama5d4 xplained: add regulators for
> v(q)mmc1 supplies")
> Cc: stable at vger.kernel.org #4.3 and later
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
And changed the $subject prefix to the new convention:
"ARM: dts: at91:"
Thanks, bye.
> ---
> arch/arm/boot/dts/at91-sama5d4_xplained.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index 569026e..da84e65 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -268,5 +268,6 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> vin-supply = <&vcc_3v3_reg>;
> + regulator-always-on;
> };
> };
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: Ludovic Desroches
<ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ARM: at91/dt: sama5d4 xplained: don't disable hsmci regulator
Date: Tue, 22 Mar 2016 11:55:19 +0100 [thread overview]
Message-ID: <56F12497.8080602@atmel.com> (raw)
In-Reply-To: <1457692516-3151-1-git-send-email-ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Le 11/03/2016 11:35, Ludovic Desroches a écrit :
> If enabling the hsmci regulator on card detection, the board can reboot
> on sd card insertion. Keeping the regulator always enabled fixes this
> issue.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> Fixes: 8d545f32bd77 ("ARM: at91/dt: sama5d4 xplained: add regulators for
> v(q)mmc1 supplies")
> Cc: stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org #4.3 and later
Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
And changed the $subject prefix to the new convention:
"ARM: dts: at91:"
Thanks, bye.
> ---
> arch/arm/boot/dts/at91-sama5d4_xplained.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index 569026e..da84e65 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -268,5 +268,6 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> vin-supply = <&vcc_3v3_reg>;
> + regulator-always-on;
> };
> };
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Ludovic Desroches <ludovic.desroches@atmel.com>,
<alexandre.belloni@free-electrons.com>
Cc: <plagnioj@jcrosoft.com>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: at91/dt: sama5d4 xplained: don't disable hsmci regulator
Date: Tue, 22 Mar 2016 11:55:19 +0100 [thread overview]
Message-ID: <56F12497.8080602@atmel.com> (raw)
In-Reply-To: <1457692516-3151-1-git-send-email-ludovic.desroches@atmel.com>
Le 11/03/2016 11:35, Ludovic Desroches a écrit :
> If enabling the hsmci regulator on card detection, the board can reboot
> on sd card insertion. Keeping the regulator always enabled fixes this
> issue.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Fixes: 8d545f32bd77 ("ARM: at91/dt: sama5d4 xplained: add regulators for
> v(q)mmc1 supplies")
> Cc: stable@vger.kernel.org #4.3 and later
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
And changed the $subject prefix to the new convention:
"ARM: dts: at91:"
Thanks, bye.
> ---
> arch/arm/boot/dts/at91-sama5d4_xplained.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index 569026e..da84e65 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -268,5 +268,6 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> vin-supply = <&vcc_3v3_reg>;
> + regulator-always-on;
> };
> };
>
--
Nicolas Ferre
next prev parent reply other threads:[~2016-03-22 10:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-11 10:35 [PATCH] ARM: at91/dt: sama5d4 xplained: don't disable hsmci regulator Ludovic Desroches
2016-03-11 10:35 ` Ludovic Desroches
2016-03-11 10:35 ` Ludovic Desroches
2016-03-22 10:55 ` Nicolas Ferre [this message]
2016-03-22 10:55 ` Nicolas Ferre
2016-03-22 10:55 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56F12497.8080602@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.