[PATCH v2 0/4] ARM64: dts: amlogi: add a few more boards

[PATCH v2 0/4] ARM64: dts: amlogi: add a few more boards

[Kevin Hilman]

Add support for a few more Amlogic S905/GXBB based boards: Hardkernel
ODROID-C2 and Amlogic P200/P201 boards.

Series was boot tested on P200 and odroid-c2, on top of next-20160321.

Kevin Hilman (4):
  ARM64: dts: amlogic: update serial aliases
  Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards
  ARM64: dts: amlogic: add Hardkernel ODROID-C2
  ARM64: dts: amlogic: Add P200/P201 boards

 Documentation/devicetree/bindings/arm/amlogic.txt  |  3 +
 arch/arm64/boot/dts/amlogic/Makefile               |  3 +
 .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 69 ++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts    | 52 ++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts    | 52 ++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi   | 65 ++++++++++++++++++++
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi      |  4 ++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  5 --
 8 files changed, 248 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

-- 
2.7.4

[PATCH v2 1/4] ARM64: dts: amlogic: update serial aliases

[Kevin Hilman]

Apparently, it's not valid to have an alias point to a disabled device.
Fix this by moving the aliases that are used (serial0) into the files
that use them, and remove aliases to disabled devices (serial1).

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi          | 5 -----
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index c1fa2667ec5c..012cdccc8a35 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -45,6 +45,10 @@
 / {
 	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
 
+	aliases {
+		serial0 = &uart_AO;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index eaa0a4553734..832815d80462 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -50,11 +50,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &uart_AO;
-		serial1 = &uart_A;
-	};
-
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;
-- 
2.7.4

[PATCH v2 2/4] Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards

[Kevin Hilman]

Add compatible strings for Amlogic S905/GXBB based boards: Hardkernel
ODROID-C2, Amlogic P200 and Amlogic P201.

Cc: devicetree at vger.kernel.org
Reviewed-by: Andreas F?rber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 8a5122ab19b0..fcc6f6c10803 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -25,3 +25,6 @@ Board compatible values:
   - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
+  - "hardkernel,odroid-c2" (Meson gxbb)
+  - "amlogic,p200" (Meson gxbb)
+  - "amlogic,p201" (Meson gxbb)
-- 
2.7.4

[PATCH v2 2/4] Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards

[Kevin Hilman]

Add compatible strings for Amlogic S905/GXBB based boards: Hardkernel
ODROID-C2, Amlogic P200 and Amlogic P201.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Reviewed-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
Signed-off-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 8a5122ab19b0..fcc6f6c10803 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -25,3 +25,6 @@ Board compatible values:
   - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
+  - "hardkernel,odroid-c2" (Meson gxbb)
+  - "amlogic,p200" (Meson gxbb)
+  - "amlogic,p201" (Meson gxbb)
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/4] ARM64: dts: amlogic: add Hardkernel ODROID-C2

[Kevin Hilman]

Add minimal DT files for the Hardkernel ODROID-C2 board based on the
Amlogic S905/GXBB SoC.

Used the other gxbb boards from Andreas F?rber as a starting point.

Cc: Andreas F?rber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |  1 +
 .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 69 ++++++++++++++++++++++
 2 files changed, 70 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index eb672f38f89e..a595752459e8 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
new file mode 100644
index 000000000000..7f2c6747a71e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas F?rber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
+	model = "Hardkernel ODROID-C2";
+	
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};
-- 
2.7.4

[PATCH v2 4/4] ARM64: dts: amlogic: Add P200/P201 boards

[Kevin Hilman]

Add minimal DT files for the Amlogic P20x development boards, based on
the Amlogic S905/GXBB SoC.

Cc: Andreas F?rber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile             |  2 +
 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts  | 52 +++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts  | 52 +++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 65 ++++++++++++++++++++++++
 4 files changed, 171 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index a595752459e8..47ec703cb230 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,4 +1,6 @@
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
new file mode 100644
index 000000000000..62979076e250
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2016 Andreas F?rber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p200", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P200 Development Board";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
new file mode 100644
index 000000000000..39bb037a3e47
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2016 Andreas F?rber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p201", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P201 Development Board";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
new file mode 100644
index 000000000000..bf7ff1d41851
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2016 Andreas F?rber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
-- 
2.7.4

[PATCH v2 1/4] ARM64: dts: amlogic: update serial aliases

[Andreas Färber]

Am 24.03.2016 um 19:05 schrieb Kevin Hilman:
> Apparently, it's not valid to have an alias point to a disabled device.
> Fix this by moving the aliases that are used (serial0) into the files
> that use them, and remove aliases to disabled devices (serial1).
> 
> Suggested-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi          | 5 -----
>  2 files changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> index c1fa2667ec5c..012cdccc8a35 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> @@ -45,6 +45,10 @@
>  / {
>  	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
>  
> +	aliases {
> +		serial0 = &uart_AO;
> +	};
> +
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index eaa0a4553734..832815d80462 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -50,11 +50,6 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> -	aliases {
> -		serial0 = &uart_AO;
> -		serial1 = &uart_A;
> -	};
> -
>  	cpus {
>  		#address-cells = <0x2>;
>  		#size-cells = <0x0>;

Reviewed-by: Andreas F?rber <afaerber@suse.de>

Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton; HRB 21284 (AG N?rnberg)

[PATCH v2 3/4] ARM64: dts: amlogic: add Hardkernel ODROID-C2

[Andreas Färber]

Am 24.03.2016 um 19:05 schrieb Kevin Hilman:
> Add minimal DT files for the Hardkernel ODROID-C2 board based on the
> Amlogic S905/GXBB SoC.
> 
> Used the other gxbb boards from Andreas F?rber as a starting point.
> 
> Cc: Andreas F?rber <afaerber@suse.de>
> Cc: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile               |  1 +
>  .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 69 ++++++++++++++++++++++
>  2 files changed, 70 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

Reviewed-by: Andreas F?rber <afaerber@suse.de>

Will re-test at a later point.

Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton; HRB 21284 (AG N?rnberg)

[PATCH v2 4/4] ARM64: dts: amlogic: Add P200/P201 boards

[Andreas Färber]

Am 24.03.2016 um 19:05 schrieb Kevin Hilman:
> Add minimal DT files for the Amlogic P20x development boards, based on
> the Amlogic S905/GXBB SoC.
> 
> Cc: Andreas F?rber <afaerber@suse.de>
> Cc: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile             |  2 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts  | 52 +++++++++++++++++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts  | 52 +++++++++++++++++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 65 ++++++++++++++++++++++++
>  4 files changed, 171 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

Reviewed-by: Andreas F?rber <afaerber@suse.de>

Thanks,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton; HRB 21284 (AG N?rnberg)

[PATCH v2 0/4] ARM64: dts: amlogi: add a few more boards

[Arnd Bergmann]

On Thursday 24 March 2016 11:05:11 Kevin Hilman wrote:
> Add support for a few more Amlogic S905/GXBB based boards: Hardkernel
> ODROID-C2 and Amlogic P200/P201 boards.
> 
> Series was boot tested on P200 and odroid-c2, on top of next-20160321.
> 

Acked-by: Arnd Bergmann <arnd@arndb.de>

[PATCH v2 2/4] Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards

[Rob Herring]

On Thu, Mar 24, 2016 at 11:05:13AM -0700, Kevin Hilman wrote:
> Add compatible strings for Amlogic S905/GXBB based boards: Hardkernel
> ODROID-C2, Amlogic P200 and Amlogic P201.
> 
> Cc: devicetree at vger.kernel.org
> Reviewed-by: Andreas F?rber <afaerber@suse.de>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.txt | 3 +++
>  1 file changed, 3 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 2/4] Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards

[Rob Herring]

On Thu, Mar 24, 2016 at 11:05:13AM -0700, Kevin Hilman wrote:
> Add compatible strings for Amlogic S905/GXBB based boards: Hardkernel
> ODROID-C2, Amlogic P200 and Amlogic P201.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Reviewed-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
> Signed-off-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.txt | 3 +++
>  1 file changed, 3 insertions(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html