All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: k.kozlowski@samsung.com, kgene@kernel.org,
	s.nawrocki@samsung.com, tomasz.figa@gmail.com
Cc: jh80.chung@samsung.com, andi.shyti@samsung.com,
	inki.dae@samsung.com, sw0312.kim@samsung.com,
	pankaj.dubey@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 3/8] clk: samsung: exynos3250: Add MMC2 clock
Date: Fri, 25 Mar 2016 08:39:40 +0900	[thread overview]
Message-ID: <56F47ABC.7060006@samsung.com> (raw)
In-Reply-To: <1458027490-13787-4-git-send-email-cw00.choi@samsung.com>

Ping.

Hi Sylwester,

Could you review this patch?

Regards,
Chanwoo Choi

On 2016년 03월 15일 16:38, Chanwoo Choi wrote:
> This patch add the MMC2 clocks (mux, divider, gate) of Exynos3250 SoC.
> 
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos3250.c   | 9 +++++++++
>  include/dt-bindings/clock/exynos3250.h | 7 ++++++-
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
> index bc60e399d1bc..16575ee874cb 100644
> --- a/drivers/clk/samsung/clk-exynos3250.c
> +++ b/drivers/clk/samsung/clk-exynos3250.c
> @@ -302,6 +302,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
>  
>  	/* SRC_FSYS */
>  	MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
> +	MUX(CLK_MOUT_MMC2, "mout_mmc2", group_sclk_p, SRC_FSYS, 8, 4),
>  	MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 4),
>  	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
>  
> @@ -390,6 +391,11 @@ static struct samsung_div_clock div_clks[] __initdata = {
>  		CLK_SET_RATE_PARENT, 0),
>  	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>  
> +	/* DIV_FSYS2 */
> +	DIV_F(CLK_DIV_MMC2_PRE, "div_mmc2_pre", "div_mmc2", DIV_FSYS2, 8, 8,
> +		CLK_SET_RATE_PARENT, 0),
> +	DIV(CLK_DIV_MMC2, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
> +
>  	/* DIV_PERIL0 */
>  	DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
>  	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
> @@ -540,6 +546,8 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  		GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
>  		GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
> +	GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc2_pre",
> +		GATE_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
>  		GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
> @@ -635,6 +643,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  	GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
>  	GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
>  	GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
> +	GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200", GATE_IP_FSYS, 7, 0, 0),
>  	GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
>  	GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
>  	GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
> diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
> index ddb874130d86..c796ff02ceeb 100644
> --- a/include/dt-bindings/clock/exynos3250.h
> +++ b/include/dt-bindings/clock/exynos3250.h
> @@ -80,6 +80,7 @@
>  #define CLK_MOUT_APLL			59
>  #define CLK_MOUT_ACLK_266_SUB		60
>  #define CLK_MOUT_UART2			61
> +#define CLK_MOUT_MMC2			62
>  
>  /* Dividers */
>  #define CLK_DIV_GPL			64
> @@ -129,6 +130,8 @@
>  #define CLK_DIV_HPM			108
>  #define CLK_DIV_COPY			109
>  #define CLK_DIV_UART2			110
> +#define CLK_DIV_MMC2_PRE		111
> +#define CLK_DIV_MMC2			112
>  
>  /* Gates */
>  #define CLK_ASYNC_G3D			128
> @@ -226,6 +229,7 @@
>  #define CLK_BLOCK_CAM			220
>  #define CLK_SMIES			221
>  #define CLK_UART2			222
> +#define CLK_SDMMC2			223
>  
>  /* Special clocks */
>  #define CLK_SCLK_JPEG			224
> @@ -253,12 +257,13 @@
>  #define CLK_SCLK_UART1			246
>  #define CLK_SCLK_UART0			247
>  #define CLK_SCLK_UART2			248
> +#define CLK_SCLK_MMC2			249
>  
>  /*
>   * Total number of clocks of main CMU.
>   * NOTE: Must be equal to last clock ID increased by one.
>   */
> -#define CLK_NR_CLKS			249
> +#define CLK_NR_CLKS			250
>  
>  /*
>   * CMU DMC
> 

WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/8] clk: samsung: exynos3250: Add MMC2 clock
Date: Fri, 25 Mar 2016 08:39:40 +0900	[thread overview]
Message-ID: <56F47ABC.7060006@samsung.com> (raw)
In-Reply-To: <1458027490-13787-4-git-send-email-cw00.choi@samsung.com>

Ping.

Hi Sylwester,

Could you review this patch?

Regards,
Chanwoo Choi

On 2016? 03? 15? 16:38, Chanwoo Choi wrote:
> This patch add the MMC2 clocks (mux, divider, gate) of Exynos3250 SoC.
> 
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos3250.c   | 9 +++++++++
>  include/dt-bindings/clock/exynos3250.h | 7 ++++++-
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
> index bc60e399d1bc..16575ee874cb 100644
> --- a/drivers/clk/samsung/clk-exynos3250.c
> +++ b/drivers/clk/samsung/clk-exynos3250.c
> @@ -302,6 +302,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
>  
>  	/* SRC_FSYS */
>  	MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
> +	MUX(CLK_MOUT_MMC2, "mout_mmc2", group_sclk_p, SRC_FSYS, 8, 4),
>  	MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 4),
>  	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
>  
> @@ -390,6 +391,11 @@ static struct samsung_div_clock div_clks[] __initdata = {
>  		CLK_SET_RATE_PARENT, 0),
>  	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>  
> +	/* DIV_FSYS2 */
> +	DIV_F(CLK_DIV_MMC2_PRE, "div_mmc2_pre", "div_mmc2", DIV_FSYS2, 8, 8,
> +		CLK_SET_RATE_PARENT, 0),
> +	DIV(CLK_DIV_MMC2, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
> +
>  	/* DIV_PERIL0 */
>  	DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
>  	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
> @@ -540,6 +546,8 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  		GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
>  		GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
> +	GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc2_pre",
> +		GATE_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
>  		GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
> @@ -635,6 +643,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  	GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
>  	GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
>  	GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
> +	GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200", GATE_IP_FSYS, 7, 0, 0),
>  	GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
>  	GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
>  	GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
> diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
> index ddb874130d86..c796ff02ceeb 100644
> --- a/include/dt-bindings/clock/exynos3250.h
> +++ b/include/dt-bindings/clock/exynos3250.h
> @@ -80,6 +80,7 @@
>  #define CLK_MOUT_APLL			59
>  #define CLK_MOUT_ACLK_266_SUB		60
>  #define CLK_MOUT_UART2			61
> +#define CLK_MOUT_MMC2			62
>  
>  /* Dividers */
>  #define CLK_DIV_GPL			64
> @@ -129,6 +130,8 @@
>  #define CLK_DIV_HPM			108
>  #define CLK_DIV_COPY			109
>  #define CLK_DIV_UART2			110
> +#define CLK_DIV_MMC2_PRE		111
> +#define CLK_DIV_MMC2			112
>  
>  /* Gates */
>  #define CLK_ASYNC_G3D			128
> @@ -226,6 +229,7 @@
>  #define CLK_BLOCK_CAM			220
>  #define CLK_SMIES			221
>  #define CLK_UART2			222
> +#define CLK_SDMMC2			223
>  
>  /* Special clocks */
>  #define CLK_SCLK_JPEG			224
> @@ -253,12 +257,13 @@
>  #define CLK_SCLK_UART1			246
>  #define CLK_SCLK_UART0			247
>  #define CLK_SCLK_UART2			248
> +#define CLK_SCLK_MMC2			249
>  
>  /*
>   * Total number of clocks of main CMU.
>   * NOTE: Must be equal to last clock ID increased by one.
>   */
> -#define CLK_NR_CLKS			249
> +#define CLK_NR_CLKS			250
>  
>  /*
>   * CMU DMC
> 

  reply	other threads:[~2016-03-24 23:39 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-15  7:38 [PATCH v3 0/8] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
2016-03-15  7:38 ` Chanwoo Choi
2016-03-15  7:38 ` [PATCH v3 1/8] ARM: dts: Add initial pin configuration for exynos3250-rinato Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi
2016-03-15  7:38 ` [PATCH v3 2/8] clk: samsung: exynos3250: Add UART2 clock Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi
2016-03-24 23:39   ` Chanwoo Choi
2016-03-24 23:39     ` Chanwoo Choi
2016-03-15  7:38 ` [PATCH v3 3/8] clk: samsung: exynos3250: Add MMC2 clock Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi
2016-03-24 23:39   ` Chanwoo Choi [this message]
2016-03-24 23:39     ` Chanwoo Choi
2016-03-25  9:50     ` Sylwester Nawrocki
2016-03-25  9:50       ` Sylwester Nawrocki
2016-03-25  9:50       ` Sylwester Nawrocki
2016-03-28  0:44       ` Chanwoo Choi
2016-03-28  0:44         ` Chanwoo Choi
     [not found]         ` <56F87E83.7060100-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-29  1:48           ` Krzysztof Kozlowski
2016-03-29  1:48             ` Krzysztof Kozlowski
2016-03-29  1:48             ` Krzysztof Kozlowski
2016-03-30  9:37             ` Sylwester Nawrocki
2016-03-30  9:37               ` Sylwester Nawrocki
     [not found]             ` <56F9DEE6.8020203-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-31 11:04               ` Sylwester Nawrocki
2016-03-31 11:04                 ` Sylwester Nawrocki
2016-03-31 11:04                 ` Sylwester Nawrocki
2016-04-01  0:15                 ` Krzysztof Kozlowski
2016-04-01  0:15                   ` Krzysztof Kozlowski
2016-03-30  9:30         ` Sylwester Nawrocki
2016-03-30  9:30           ` Sylwester Nawrocki
2016-03-15  7:38 ` [PATCH v3 4/8] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi
2016-03-15  7:38 ` [PATCH v3 5/8] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi
     [not found] ` <1458027490-13787-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15  7:38   ` [PATCH v3 6/8] ARM: dts: Add MSHC2 dt node for Exynos3250 SoC Chanwoo Choi
2016-03-15  7:38     ` Chanwoo Choi
2016-03-15  7:38     ` Chanwoo Choi
2016-03-15  7:38 ` [PATCH v3 7/8] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi
2016-03-18 21:01   ` Rob Herring
2016-03-18 21:01     ` Rob Herring
2016-03-19 11:44     ` Chanwoo Choi
2016-03-19 11:44       ` Chanwoo Choi
2016-03-15  7:38 ` [PATCH v3 8/8] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Chanwoo Choi
2016-03-15  7:38   ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56F47ABC.7060006@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=andi.shyti@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=jh80.chung@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=pankaj.dubey@samsung.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sw0312.kim@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.