From: "François-David Collin" <fradav@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2
Date: Fri, 18 Mar 2016 18:33:09 +0100 [thread overview]
Message-ID: <56ec3bd5.8b941c0a.37c90.1d4d@mx.google.com> (raw)
Hi,
As I?m banging my head on this too, please allow me to provide some details
I got two stable situations :
The Lime2 is connected directly to the Gbit interface of my laptop, speed are OK:
1. The Lime2 is connected directly to the Gbit interface of my laptop
[alarm at lime2 ~]$ iperf3 -s -p 5201
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.137.1, port 58077
[ 5] local 192.168.137.58 port 5201 connected to 192.168.137.1 port 58078
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 81.4 MBytes 683 Mbits/sec
[ 5] 1.00-2.00 sec 82.2 MBytes 690 Mbits/sec
[ 5] 2.00-3.00 sec 85.0 MBytes 713 Mbits/sec
[ 5] 3.00-4.00 sec 82.1 MBytes 689 Mbits/sec
[ 5] 4.00-5.00 sec 87.9 MBytes 738 Mbits/sec
[ 5] 5.00-6.00 sec 78.8 MBytes 661 Mbits/sec
[ 5] 6.00-7.00 sec 75.0 MBytes 629 Mbits/sec
[ 5] 7.00-8.00 sec 88.4 MBytes 741 Mbits/sec
[ 5] 8.00-9.00 sec 69.2 MBytes 581 Mbits/sec
[ 5] 9.00-10.00 sec 67.2 MBytes 564 Mbits/sec
[ 5] 10.00-10.04 sec 2.82 MBytes 660 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.04 sec 800 MBytes 669 Mbits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.137.1, port 58081
[ 5] local 192.168.137.58 port 5201 connected to 192.168.137.1 port 58082
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.00 sec 71.4 MBytes 598 Mbits/sec 0 221 KBytes
[ 5] 1.00-2.00 sec 76.0 MBytes 637 Mbits/sec 0 221 KBytes
[ 5] 2.00-3.00 sec 76.8 MBytes 645 Mbits/sec 0 221 KBytes
[ 5] 3.00-4.00 sec 74.1 MBytes 621 Mbits/sec 0 221 KBytes
[ 5] 4.00-5.00 sec 75.0 MBytes 630 Mbits/sec 0 221 KBytes
[ 5] 5.00-6.00 sec 69.4 MBytes 582 Mbits/sec 0 221 KBytes
[ 5] 6.00-7.03 sec 68.6 MBytes 562 Mbits/sec 0 221 KBytes
[ 5] 7.03-8.03 sec 65.3 MBytes 548 Mbits/sec 0 221 KBytes
[ 5] 8.03-9.00 sec 64.1 MBytes 552 Mbits/sec 0 221 KBytes
[ 5] 9.00-10.00 sec 72.8 MBytes 610 Mbits/sec 0 221 KBytes
[ 5] 10.00-10.04 sec 2.27 MBytes 513 Mbits/sec 0 221 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-10.04 sec 716 MBytes 598 Mbits/sec 0 sender
[ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
[alarm at lime2 Dev]$ sudo ./mmio-dump 0x1c20164
01c20164: 00000006
[alarm at lime2 Dev]$ sudo i2cdump -f -y 0 0x34
No size specified (using byte-data access)
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: c1 10 00 41 00 00 00 00 00 00 00 00 00 00 00 00 ??.A............
10: 05 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 ?._.............
20: 00 00 00 1c 00 00 00 16 cb 54 00 00 00 00 00 00 ...?...??T......
30: 60 03 42 c9 45 22 9d 0a a5 1f 68 5f fc 16 00 00 `?B?E"????h_??..
40: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 ....`...........
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 02 ..............p?
60: dc 0e 3e 08 00 00 00 00 00 00 00 00 00 00 00 00 ??>?............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0e ..............??
80: e0 fd 83 80 32 00 ff 00 00 00 00 00 00 00 00 21 ????2..........!
90: 07 a5 07 07 00 02 00 00 00 00 00 00 00 00 00 00 ????.?..........
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0c ..............??
b0: 00 00 00 00 00 00 00 00 00 7f 00 ba 00 00 00 00 .........?.?....
c0: 01 01 02 04 07 0d 10 1a 24 2e 35 3d 49 54 5c 63 ????????$.5=IT\c
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 41 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 A.??............
2. The Lime2 is connected to one of the 4 Gbit port of my home switch, TX speed are terrible, RX are somewhat OK
[alarm at lime2 ~]$ iperf3 -s -p 5201
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.0.10, port 58657
[ 5] local 192.168.0.8 port 5201 connected to 192.168.0.10 port 58658
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 1.00-2.00 sec 49.9 KBytes 409 Kbits/sec
[ 5] 2.00-3.00 sec 25.7 KBytes 210 Kbits/sec
[ 5] 3.00-4.00 sec 18.5 KBytes 152 Kbits/sec
[ 5] 4.00-5.00 sec 17.1 KBytes 140 Kbits/sec
[ 5] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 10.00-10.19 sec 0.00 Bytes 0.00 bits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.19 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.19 sec 111 KBytes 89.4 Kbits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.0.10, port 58684
[ 5] local 192.168.0.8 port 5201 connected to 192.168.0.10 port 58685
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.01 sec 87.5 MBytes 728 Mbits/sec 0 210 KBytes
[ 5] 1.01-2.01 sec 89.3 MBytes 746 Mbits/sec 0 210 KBytes
[ 5] 2.01-3.00 sec 84.2 MBytes 710 Mbits/sec 0 221 KBytes
[ 5] 3.00-4.00 sec 85.3 MBytes 718 Mbits/sec 0 221 KBytes
[ 5] 4.00-5.01 sec 80.3 MBytes 668 Mbits/sec 0 221 KBytes
[ 5] 5.01-6.01 sec 88.1 MBytes 741 Mbits/sec 0 221 KBytes
[ 5] 6.01-7.00 sec 89.1 MBytes 751 Mbits/sec 0 221 KBytes
[ 5] 7.00-8.01 sec 89.5 MBytes 745 Mbits/sec 0 221 KBytes
[ 5] 8.01-9.00 sec 83.5 MBytes 708 Mbits/sec 0 221 KBytes
[ 5] 9.00-10.00 sec 79.2 MBytes 664 Mbits/sec 0 221 KBytes
[ 5] 10.00-10.06 sec 2.75 MBytes 371 Mbits/sec 0 221 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-10.06 sec 859 MBytes 716 Mbits/sec 0 sender
[ 5] 0.00-10.06 sec 0.00 Bytes 0.00 bits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
[alarm at lime2 Dev]$ sudo ./mmio-dump 0x1c20164
01c20164: 00000006
[alarm at lime2 Dev]$ sudo i2cdump -f -y 0 0x34
No size specified (using byte-data access)
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: c1 10 00 41 00 00 00 00 00 00 00 00 00 00 00 00 ??.A............
10: 05 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 ?._.............
20: 00 00 00 1c 00 00 00 16 cb 54 00 00 00 00 00 00 ...?...??T......
30: 60 03 42 c9 45 22 9d 0a a5 1f 68 5f fc 16 00 00 `?B?E"????h_??..
40: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 ....`...........
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6c 0a ..............l?
60: dd 08 3e 08 00 00 00 00 00 00 00 00 00 00 00 00 ??>?............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0e ..............??
80: e0 fd 83 80 32 00 ff 00 00 00 00 00 00 00 00 21 ????2..........!
90: 07 a5 07 07 00 02 00 00 00 00 00 00 00 00 00 00 ????.?..........
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 06 ..............??
b0: 00 00 00 00 00 00 00 00 00 7f 00 ba 00 00 00 00 .........?.?....
c0: 01 01 02 04 07 0d 10 1a 24 2e 35 3d 49 54 5c 63 ????????$.5=IT\c
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 41 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 A.??............
Hope this helps to pinepoint the source of the problem ?
Regards,
--
Fran?ois-David Collin
next reply other threads:[~2016-03-18 17:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 17:33 François-David Collin [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-03-15 5:41 [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2 Michael Haas
[not found] ` <20160315180914.GA1878@excalibur.cnev.de>
2016-03-15 20:41 ` Tom Rini
2016-03-16 8:32 ` Michael Haas
2016-03-16 9:29 ` Hans de Goede
2016-03-16 10:53 ` Hans de Goede
[not found] ` <20160316203642.GC1817@excalibur.cnev.de>
2016-03-17 5:28 ` Michael Haas
2016-03-17 10:52 ` Hans de Goede
2016-03-17 21:53 ` Michael Haas
2016-03-18 7:41 ` Hans de Goede
[not found] ` <20160318190220.GC1815@excalibur.cnev.de>
2016-03-18 19:06 ` Michael Haas
2016-03-20 8:36 ` Michael Haas
2016-03-20 10:05 ` François-David Collin
2016-03-18 20:32 ` Michael Haas
2016-03-18 21:53 ` Michael Haas
2016-03-19 8:39 ` François-David Collin
2016-03-19 9:32 ` Hans de Goede
2016-03-19 9:35 ` Michael Haas
2016-03-19 9:45 ` Michael Haas
2016-03-19 13:40 ` Michael Haas
2016-03-19 14:35 ` François-David Collin
2016-03-20 13:45 ` Hans de Goede
2016-03-20 15:28 ` Michael Haas
2016-03-20 18:51 ` Hans de Goede
[not found] ` <20160321154714.GA4751@excalibur.cnev.de>
2016-03-21 18:57 ` Michael Haas
2016-03-21 20:59 ` Hans de Goede
2016-03-21 21:01 ` Hans de Goede
2016-03-21 21:47 ` Michael Haas
2016-03-21 22:00 ` Hans de Goede
2016-03-22 5:12 ` Michael Haas
2016-03-22 8:46 ` Peter Korsgaard
2016-03-22 8:57 ` Hans de Goede
2016-03-22 9:01 ` Michael Haas
2016-03-22 9:50 ` Peter Korsgaard
[not found] ` <20160321173000.GD4751@excalibur.cnev.de>
2016-03-21 20:56 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56ec3bd5.8b941c0a.37c90.1d4d@mx.google.com \
--to=fradav@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.