From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: Vivek Gautam <gautamvivek1987-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "Linux USB Mailing List"
<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Russell King - ARM Linux"
<linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
"Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
spear-devel-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Chen-Yu Tsai" <wens-jdAy2FN1RRM@public.gmane.org>,
"linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Vivek Gautam"
<gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
CPGS <cpgs-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
"Maxime Ripard"
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
"linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Shiraz Hashim"
<shiraz.linux.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers
Date: Wed, 6 Apr 2016 18:21:54 +0530 [thread overview]
Message-ID: <5705066A.8010903@ti.com> (raw)
In-Reply-To: <CAFp+6iEJAq6CzntpM-RXYN8NwtHUUJoFHFf17mdV4nLE8eJwyA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Hi,
On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote:
> Hi,
>
>
> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> wrote:
>> Hi,
>>
>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>>> Adding vendor specific directories in phy to group
>>> phy drivers under their respective vendor umbrella.
>>>
>>> Signed-off-by: Vivek Gautam <gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>>> ---
>>>
>>> With growing number of phy drivers, it makes sense to
>>> group these drivers under their respective vendor/platform
>>> umbrella directory.
>>>
>>> Build-tested 'multi_v7_defconfig'.
>>>
>>> drivers/phy/Kconfig | 386 +---------------------
>>> drivers/phy/Makefile | 57 +---
>>> drivers/phy/bcom/Kconfig | 27 ++
>>> drivers/phy/bcom/Makefile | 3 +
>>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
>>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
>>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
>>> drivers/phy/hisi/Kconfig | 20 ++
>>> drivers/phy/hisi/Makefile | 2 +
>>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
>>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
>>> drivers/phy/marvell/Kconfig | 50 +++
>>> drivers/phy/marvell/Makefile | 6 +
>>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
>>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
>>> drivers/phy/qcom/Kconfig | 23 ++
>>> drivers/phy/qcom/Makefile | 5 +
>>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
>>> drivers/phy/rcar/Kconfig | 16 +
>>> drivers/phy/rcar/Makefile | 2 +
>>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
>>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
>>> drivers/phy/rockchip/Kconfig | 23 ++
>>> drivers/phy/rockchip/Makefile | 3 +
>>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
>>> drivers/phy/samsung/Kconfig | 87 +++++
>>> drivers/phy/samsung/Makefile | 10 +
>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>> drivers/phy/st/Kconfig | 51 +++
>>> drivers/phy/st/Makefile | 6 +
>>> drivers/phy/{ => st}/phy-miphy28lp.c | 0
>>> drivers/phy/{ => st}/phy-miphy365x.c | 0
>>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>>> drivers/phy/{ => st}/phy-stih407-usb.c | 0
>>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
>>> drivers/phy/sunxi/Kconfig | 28 ++
>>> drivers/phy/sunxi/Makefile | 2 +
>>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
>>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
>>> drivers/phy/ti/Kconfig | 67 ++++
>>> drivers/phy/ti/Makefile | 6 +
>>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
>>> drivers/phy/{ => ti}/phy-omap-control.c | 0
>>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
>>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
>>> drivers/phy/{ => ti}/phy-tusb1210.c | 0
>>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
>>> drivers/phy/{ => ti}/ulpi_phy.h | 0
>>
>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
>> driver.
>
> Yes, you are right. But i was hesitant to add a multi-level header
> file include in the phy driver
> which uses it.
>
> Does it makes sense to move this ulpi_phy.h to include/linux/phy ?
yeah.. that should be okay.
>
>>> 71 files changed, 464 insertions(+), 416 deletions(-)
>>> create mode 100644 drivers/phy/bcom/Kconfig
>>> create mode 100644 drivers/phy/bcom/Makefile
>>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>>> create mode 100644 drivers/phy/hisi/Kconfig
>>> create mode 100644 drivers/phy/hisi/Makefile
>>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>>> create mode 100644 drivers/phy/marvell/Kconfig
>>> create mode 100644 drivers/phy/marvell/Makefile
>>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>>> create mode 100644 drivers/phy/qcom/Kconfig
>>> create mode 100644 drivers/phy/qcom/Makefile
>>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>>> create mode 100644 drivers/phy/rcar/Kconfig
>>> create mode 100644 drivers/phy/rcar/Makefile
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>>> create mode 100644 drivers/phy/rockchip/Kconfig
>>> create mode 100644 drivers/phy/rockchip/Makefile
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>>> create mode 100644 drivers/phy/samsung/Kconfig
>>> create mode 100644 drivers/phy/samsung/Makefile
>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>> create mode 100644 drivers/phy/st/Kconfig
>>> create mode 100644 drivers/phy/st/Makefile
>>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>>> create mode 100644 drivers/phy/sunxi/Kconfig
>>> create mode 100644 drivers/phy/sunxi/Makefile
>>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>>> create mode 100644 drivers/phy/ti/Kconfig
>>> create mode 100644 drivers/phy/ti/Makefile
>>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index 26566db..80c8c68 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>>> phy users can obtain reference to the PHY. All the users of this
>>> framework should select this config.
>>>
>>
>>> +menuconfig PHY_PLAT
>>> + bool "Platform Phy drivers"
>>
>> Not really convinced about adding a new config here. This will create new
>> dependencies and will also start breaking users of oldconfig.
>
> This serves including all the directory paths in the 'make' for
> driver/phy/Makefile.
>
> Otherwise each directory will have to be built as per particular platform
> And, not all drivers of a vendor are built for one-kind of platform,
> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
> Similarly, Broadcom phy drivers are based on multiple platforms, and so
> does Marvell's.
>
> Please suggest a concise way to include the vendor directories in the build path
> in drivers/phy/Makefile.
obj-y += vendor/?
-Kishon
>
>>
>> Also not all of them are platform drivers (e.g ULPI PHY drivers).
> I Think this applies to ulpi_phy only at this moment, which we can resolve
> by moving that to include/linux path.
>
>>
>> Thanks
>> Kishon
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] phy: Group vendor specific phy drivers
Date: Wed, 6 Apr 2016 18:21:54 +0530 [thread overview]
Message-ID: <5705066A.8010903@ti.com> (raw)
In-Reply-To: <CAFp+6iEJAq6CzntpM-RXYN8NwtHUUJoFHFf17mdV4nLE8eJwyA@mail.gmail.com>
Hi,
On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote:
> Hi,
>
>
> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>> Hi,
>>
>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>>> Adding vendor specific directories in phy to group
>>> phy drivers under their respective vendor umbrella.
>>>
>>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
>>> ---
>>>
>>> With growing number of phy drivers, it makes sense to
>>> group these drivers under their respective vendor/platform
>>> umbrella directory.
>>>
>>> Build-tested 'multi_v7_defconfig'.
>>>
>>> drivers/phy/Kconfig | 386 +---------------------
>>> drivers/phy/Makefile | 57 +---
>>> drivers/phy/bcom/Kconfig | 27 ++
>>> drivers/phy/bcom/Makefile | 3 +
>>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
>>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
>>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
>>> drivers/phy/hisi/Kconfig | 20 ++
>>> drivers/phy/hisi/Makefile | 2 +
>>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
>>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
>>> drivers/phy/marvell/Kconfig | 50 +++
>>> drivers/phy/marvell/Makefile | 6 +
>>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
>>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
>>> drivers/phy/qcom/Kconfig | 23 ++
>>> drivers/phy/qcom/Makefile | 5 +
>>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
>>> drivers/phy/rcar/Kconfig | 16 +
>>> drivers/phy/rcar/Makefile | 2 +
>>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
>>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
>>> drivers/phy/rockchip/Kconfig | 23 ++
>>> drivers/phy/rockchip/Makefile | 3 +
>>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
>>> drivers/phy/samsung/Kconfig | 87 +++++
>>> drivers/phy/samsung/Makefile | 10 +
>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>> drivers/phy/st/Kconfig | 51 +++
>>> drivers/phy/st/Makefile | 6 +
>>> drivers/phy/{ => st}/phy-miphy28lp.c | 0
>>> drivers/phy/{ => st}/phy-miphy365x.c | 0
>>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>>> drivers/phy/{ => st}/phy-stih407-usb.c | 0
>>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
>>> drivers/phy/sunxi/Kconfig | 28 ++
>>> drivers/phy/sunxi/Makefile | 2 +
>>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
>>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
>>> drivers/phy/ti/Kconfig | 67 ++++
>>> drivers/phy/ti/Makefile | 6 +
>>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
>>> drivers/phy/{ => ti}/phy-omap-control.c | 0
>>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
>>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
>>> drivers/phy/{ => ti}/phy-tusb1210.c | 0
>>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
>>> drivers/phy/{ => ti}/ulpi_phy.h | 0
>>
>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
>> driver.
>
> Yes, you are right. But i was hesitant to add a multi-level header
> file include in the phy driver
> which uses it.
>
> Does it makes sense to move this ulpi_phy.h to include/linux/phy ?
yeah.. that should be okay.
>
>>> 71 files changed, 464 insertions(+), 416 deletions(-)
>>> create mode 100644 drivers/phy/bcom/Kconfig
>>> create mode 100644 drivers/phy/bcom/Makefile
>>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>>> create mode 100644 drivers/phy/hisi/Kconfig
>>> create mode 100644 drivers/phy/hisi/Makefile
>>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>>> create mode 100644 drivers/phy/marvell/Kconfig
>>> create mode 100644 drivers/phy/marvell/Makefile
>>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>>> create mode 100644 drivers/phy/qcom/Kconfig
>>> create mode 100644 drivers/phy/qcom/Makefile
>>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>>> create mode 100644 drivers/phy/rcar/Kconfig
>>> create mode 100644 drivers/phy/rcar/Makefile
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>>> create mode 100644 drivers/phy/rockchip/Kconfig
>>> create mode 100644 drivers/phy/rockchip/Makefile
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>>> create mode 100644 drivers/phy/samsung/Kconfig
>>> create mode 100644 drivers/phy/samsung/Makefile
>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>> create mode 100644 drivers/phy/st/Kconfig
>>> create mode 100644 drivers/phy/st/Makefile
>>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>>> create mode 100644 drivers/phy/sunxi/Kconfig
>>> create mode 100644 drivers/phy/sunxi/Makefile
>>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>>> create mode 100644 drivers/phy/ti/Kconfig
>>> create mode 100644 drivers/phy/ti/Makefile
>>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index 26566db..80c8c68 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>>> phy users can obtain reference to the PHY. All the users of this
>>> framework should select this config.
>>>
>>
>>> +menuconfig PHY_PLAT
>>> + bool "Platform Phy drivers"
>>
>> Not really convinced about adding a new config here. This will create new
>> dependencies and will also start breaking users of oldconfig.
>
> This serves including all the directory paths in the 'make' for
> driver/phy/Makefile.
>
> Otherwise each directory will have to be built as per particular platform
> And, not all drivers of a vendor are built for one-kind of platform,
> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
> Similarly, Broadcom phy drivers are based on multiple platforms, and so
> does Marvell's.
>
> Please suggest a concise way to include the vendor directories in the build path
> in drivers/phy/Makefile.
obj-y += vendor/?
-Kishon
>
>>
>> Also not all of them are platform drivers (e.g ULPI PHY drivers).
> I Think this applies to ulpi_phy only at this moment, which we can resolve
> by moving that to include/linux path.
>
>>
>> Thanks
>> Kishon
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Vivek Gautam <gautamvivek1987@gmail.com>
Cc: "Vivek Gautam" <gautam.vivek@samsung.com>,
vireshk@kernel.org,
"Shiraz Hashim" <shiraz.linux.kernel@gmail.com>,
"Heiko Stübner" <heiko@sntech.de>,
"Maxime Ripard" <maxime.ripard@free-electrons.com>,
"Chen-Yu Tsai" <wens@csie.org>,
"Russell King - ARM Linux" <linux@arm.linux.org.uk>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
spear-devel@list.st.com,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-rockchip@lists.infradead.org,
"Linux USB Mailing List" <linux-usb@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
CPGS <cpgs@samsung.com>
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers
Date: Wed, 6 Apr 2016 18:21:54 +0530 [thread overview]
Message-ID: <5705066A.8010903@ti.com> (raw)
In-Reply-To: <CAFp+6iEJAq6CzntpM-RXYN8NwtHUUJoFHFf17mdV4nLE8eJwyA@mail.gmail.com>
Hi,
On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote:
> Hi,
>
>
> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>> Hi,
>>
>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>>> Adding vendor specific directories in phy to group
>>> phy drivers under their respective vendor umbrella.
>>>
>>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
>>> ---
>>>
>>> With growing number of phy drivers, it makes sense to
>>> group these drivers under their respective vendor/platform
>>> umbrella directory.
>>>
>>> Build-tested 'multi_v7_defconfig'.
>>>
>>> drivers/phy/Kconfig | 386 +---------------------
>>> drivers/phy/Makefile | 57 +---
>>> drivers/phy/bcom/Kconfig | 27 ++
>>> drivers/phy/bcom/Makefile | 3 +
>>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
>>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
>>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
>>> drivers/phy/hisi/Kconfig | 20 ++
>>> drivers/phy/hisi/Makefile | 2 +
>>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
>>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
>>> drivers/phy/marvell/Kconfig | 50 +++
>>> drivers/phy/marvell/Makefile | 6 +
>>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
>>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
>>> drivers/phy/qcom/Kconfig | 23 ++
>>> drivers/phy/qcom/Makefile | 5 +
>>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
>>> drivers/phy/rcar/Kconfig | 16 +
>>> drivers/phy/rcar/Makefile | 2 +
>>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
>>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
>>> drivers/phy/rockchip/Kconfig | 23 ++
>>> drivers/phy/rockchip/Makefile | 3 +
>>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
>>> drivers/phy/samsung/Kconfig | 87 +++++
>>> drivers/phy/samsung/Makefile | 10 +
>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>> drivers/phy/st/Kconfig | 51 +++
>>> drivers/phy/st/Makefile | 6 +
>>> drivers/phy/{ => st}/phy-miphy28lp.c | 0
>>> drivers/phy/{ => st}/phy-miphy365x.c | 0
>>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>>> drivers/phy/{ => st}/phy-stih407-usb.c | 0
>>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
>>> drivers/phy/sunxi/Kconfig | 28 ++
>>> drivers/phy/sunxi/Makefile | 2 +
>>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
>>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
>>> drivers/phy/ti/Kconfig | 67 ++++
>>> drivers/phy/ti/Makefile | 6 +
>>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
>>> drivers/phy/{ => ti}/phy-omap-control.c | 0
>>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
>>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
>>> drivers/phy/{ => ti}/phy-tusb1210.c | 0
>>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
>>> drivers/phy/{ => ti}/ulpi_phy.h | 0
>>
>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
>> driver.
>
> Yes, you are right. But i was hesitant to add a multi-level header
> file include in the phy driver
> which uses it.
>
> Does it makes sense to move this ulpi_phy.h to include/linux/phy ?
yeah.. that should be okay.
>
>>> 71 files changed, 464 insertions(+), 416 deletions(-)
>>> create mode 100644 drivers/phy/bcom/Kconfig
>>> create mode 100644 drivers/phy/bcom/Makefile
>>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>>> create mode 100644 drivers/phy/hisi/Kconfig
>>> create mode 100644 drivers/phy/hisi/Makefile
>>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>>> create mode 100644 drivers/phy/marvell/Kconfig
>>> create mode 100644 drivers/phy/marvell/Makefile
>>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>>> create mode 100644 drivers/phy/qcom/Kconfig
>>> create mode 100644 drivers/phy/qcom/Makefile
>>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>>> create mode 100644 drivers/phy/rcar/Kconfig
>>> create mode 100644 drivers/phy/rcar/Makefile
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>>> create mode 100644 drivers/phy/rockchip/Kconfig
>>> create mode 100644 drivers/phy/rockchip/Makefile
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>>> create mode 100644 drivers/phy/samsung/Kconfig
>>> create mode 100644 drivers/phy/samsung/Makefile
>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>> create mode 100644 drivers/phy/st/Kconfig
>>> create mode 100644 drivers/phy/st/Makefile
>>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>>> create mode 100644 drivers/phy/sunxi/Kconfig
>>> create mode 100644 drivers/phy/sunxi/Makefile
>>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>>> create mode 100644 drivers/phy/ti/Kconfig
>>> create mode 100644 drivers/phy/ti/Makefile
>>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index 26566db..80c8c68 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>>> phy users can obtain reference to the PHY. All the users of this
>>> framework should select this config.
>>>
>>
>>> +menuconfig PHY_PLAT
>>> + bool "Platform Phy drivers"
>>
>> Not really convinced about adding a new config here. This will create new
>> dependencies and will also start breaking users of oldconfig.
>
> This serves including all the directory paths in the 'make' for
> driver/phy/Makefile.
>
> Otherwise each directory will have to be built as per particular platform
> And, not all drivers of a vendor are built for one-kind of platform,
> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
> Similarly, Broadcom phy drivers are based on multiple platforms, and so
> does Marvell's.
>
> Please suggest a concise way to include the vendor directories in the build path
> in drivers/phy/Makefile.
obj-y += vendor/?
-Kishon
>
>>
>> Also not all of them are platform drivers (e.g ULPI PHY drivers).
> I Think this applies to ulpi_phy only at this moment, which we can resolve
> by moving that to include/linux path.
>
>>
>> Thanks
>> Kishon
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
next prev parent reply other threads:[~2016-04-06 12:51 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-01 11:29 [PATCH 1/2] phy: Group vendor specific phy drivers Vivek Gautam
2016-04-01 11:29 ` Vivek Gautam
2016-04-01 11:29 ` Vivek Gautam
2016-04-01 11:39 ` Viresh Kumar
2016-04-01 11:39 ` Viresh Kumar
2016-04-01 12:52 ` Vivek Gautam
2016-04-01 12:52 ` Vivek Gautam
2016-04-01 11:42 ` Maxime Ripard
2016-04-01 11:42 ` Maxime Ripard
2016-04-01 12:51 ` Vivek Gautam
2016-04-01 12:51 ` Vivek Gautam
[not found] ` <1459510156-9147-1-git-send-email-gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-04-01 11:29 ` [PATCH 2/2] arm: mach-spear: Enable PHY_PLAT to meet dependency Vivek Gautam
2016-04-01 11:29 ` Vivek Gautam
2016-04-01 11:29 ` Vivek Gautam
2016-04-01 11:42 ` Viresh Kumar
2016-04-01 11:42 ` Viresh Kumar
2016-04-01 13:05 ` [PATCH 1/2] phy: Group vendor specific phy drivers Kishon Vijay Abraham I
2016-04-01 13:05 ` Kishon Vijay Abraham I
2016-04-01 13:05 ` Kishon Vijay Abraham I
2016-04-01 13:35 ` Vivek Gautam
2016-04-01 13:35 ` Vivek Gautam
[not found] ` <CAFp+6iEJAq6CzntpM-RXYN8NwtHUUJoFHFf17mdV4nLE8eJwyA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-06 12:51 ` Kishon Vijay Abraham I [this message]
2016-04-06 12:51 ` Kishon Vijay Abraham I
2016-04-06 12:51 ` Kishon Vijay Abraham I
[not found] ` <5705066A.8010903-l0cyMroinI0@public.gmane.org>
2016-04-06 13:48 ` Vivek Gautam
2016-04-06 13:48 ` Vivek Gautam
2016-04-06 13:48 ` Vivek Gautam
2016-04-01 15:16 ` Heiko Stuebner
2016-04-01 15:16 ` Heiko Stuebner
2016-04-01 15:16 ` Heiko Stuebner
2016-04-01 15:31 ` kbuild test robot
2016-04-01 15:31 ` kbuild test robot
2016-04-01 15:31 ` kbuild test robot
[not found] ` <201604012318.jqf9PVXF%fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-04-05 4:54 ` Vivek Gautam
2016-04-05 4:54 ` Vivek Gautam
2016-04-05 4:54 ` Vivek Gautam
2016-04-03 6:05 ` Krzysztof Kozlowski
2016-04-03 6:05 ` Krzysztof Kozlowski
2016-04-05 4:52 ` Vivek Gautam
2016-04-05 4:52 ` Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5705066A.8010903@ti.com \
--to=kishon-l0cymroini0@public.gmane.org \
--cc=cpgs-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=gautamvivek1987-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=shiraz.linux.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=spear-devel-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org \
--cc=vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.