All of lore.kernel.org
 help / color / mirror / Atom feed
From: nsekhar@ti.com (Sekhar Nori)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: DTS: da850: add node for i2c1
Date: Thu, 7 Apr 2016 20:21:34 +0530	[thread overview]
Message-ID: <570673F6.1090508@ti.com> (raw)
In-Reply-To: <1459525325-25470-3-git-send-email-petr@barix.com>

On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> da850 has two I2C controllers, but the node for i2c1 was missing.
> Add node for i2c1 controller and i2c1 pinmux pins.
> 
> Signed-off-by: Petr Kulhavy <petr@barix.com>
> ---
>  arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 42948496b8f7..136c422204d3 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -63,6 +63,12 @@
>  					0x10 0x00002200 0x0000ff00
>  				>;
>  			};
> +			i2c1_pins: pinmux_i2c1_pins {
> +				pinctrl-single,bits = <

> +				/* I2C1_SDA,I2C1_SCL */
> +				0x10 0x00440000 0x00ff0000

Indented these two lines one tab like its done elsewhere in the file and
applied.

Thanks,
Sekhar

WARNING: multiple messages have this Message-ID (diff)
From: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
To: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>,
	khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org
Subject: Re: [PATCH 2/3] ARM: DTS: da850: add node for i2c1
Date: Thu, 7 Apr 2016 20:21:34 +0530	[thread overview]
Message-ID: <570673F6.1090508@ti.com> (raw)
In-Reply-To: <1459525325-25470-3-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>

On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> da850 has two I2C controllers, but the node for i2c1 was missing.
> Add node for i2c1 controller and i2c1 pinmux pins.
> 
> Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 42948496b8f7..136c422204d3 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -63,6 +63,12 @@
>  					0x10 0x00002200 0x0000ff00
>  				>;
>  			};
> +			i2c1_pins: pinmux_i2c1_pins {
> +				pinctrl-single,bits = <

> +				/* I2C1_SDA,I2C1_SCL */
> +				0x10 0x00440000 0x00ff0000

Indented these two lines one tab like its done elsewhere in the file and
applied.

Thanks,
Sekhar

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2016-04-07 14:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-01 15:42 [PATCH 0/3] ARM: DTS: da850: add node for i2c1 Petr Kulhavy
2016-04-01 15:42 ` Petr Kulhavy
2016-04-01 15:42 ` [PATCH 1/3] dt: davinci: use proper address after @ Petr Kulhavy
2016-04-01 15:42   ` Petr Kulhavy
2016-04-07 14:33   ` Sekhar Nori
2016-04-07 14:33     ` Sekhar Nori
2016-04-07 15:05     ` Petr Kulhavy
2016-04-07 15:05       ` Petr Kulhavy
2016-04-01 15:42 ` [PATCH 2/3] ARM: DTS: da850: add node for i2c1 Petr Kulhavy
2016-04-01 15:42   ` Petr Kulhavy
2016-04-07 14:51   ` Sekhar Nori [this message]
2016-04-07 14:51     ` Sekhar Nori
2016-04-01 15:42 ` [PATCH 3/3] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry " Petr Kulhavy
2016-04-01 15:42   ` Petr Kulhavy
2016-04-07 14:53   ` Sekhar Nori
2016-04-07 14:53     ` Sekhar Nori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=570673F6.1090508@ti.com \
    --to=nsekhar@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.