* [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 @ 2016-04-10 14:22 Robert Yang 2016-04-10 14:22 ` [PATCH 1/1] " Robert Yang 2016-04-11 1:52 ` [PATCH 0/1] " Bruce Ashfield 0 siblings, 2 replies; 13+ messages in thread From: Robert Yang @ 2016-04-10 14:22 UTC (permalink / raw) To: poky, bruce.ashfield The following changes since commit 778121ab844af623a215430ba579a5fb3947928b: local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES (2016-04-09 23:00:46 +0100) are available in the git repository at: git://git.pokylinux.org/poky-contrib rbt/kernel http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel Robert Yang (1): poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 meta-poky/conf/distro/poky-tiny.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.8.0 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-10 14:22 [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 Robert Yang @ 2016-04-10 14:22 ` Robert Yang 2016-04-11 1:52 ` [PATCH 0/1] " Bruce Ashfield 1 sibling, 0 replies; 13+ messages in thread From: Robert Yang @ 2016-04-10 14:22 UTC (permalink / raw) To: poky, bruce.ashfield Signed-off-by: Robert Yang <liezhi.yang@windriver.com> --- meta-poky/conf/distro/poky-tiny.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/meta-poky/conf/distro/poky-tiny.conf b/meta-poky/conf/distro/poky-tiny.conf index 0ac46ac..ac05420 100644 --- a/meta-poky/conf/distro/poky-tiny.conf +++ b/meta-poky/conf/distro/poky-tiny.conf @@ -37,7 +37,7 @@ TCLIBC = "musl" # Distro config is evaluated after the machine config, so we have to explicitly # set the kernel provider to override a machine config. PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-tiny" -PREFERRED_VERSION_linux-yocto-tiny ?= "4.1%" +PREFERRED_VERSION_linux-yocto-tiny ?= "4.4%" # We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny #POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot" -- 2.8.0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-10 14:22 [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 Robert Yang 2016-04-10 14:22 ` [PATCH 1/1] " Robert Yang @ 2016-04-11 1:52 ` Bruce Ashfield 2016-04-11 2:40 ` Robert Yang 1 sibling, 1 reply; 13+ messages in thread From: Bruce Ashfield @ 2016-04-11 1:52 UTC (permalink / raw) To: Robert Yang, poky On 2016-04-10 10:22 AM, Robert Yang wrote: > The following changes since commit 778121ab844af623a215430ba579a5fb3947928b: > > local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES (2016-04-09 23:00:46 +0100) > > are available in the git repository at: > > git://git.pokylinux.org/poky-contrib rbt/kernel > http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel > > Robert Yang (1): > poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 > Can you provide some bootlogs ? Size information, etc ? When we jump this between kernel versions, we need to log some sort of information about functionality and the size of the image. I've been carrying this support forward, but in 4.4, we did change some of the kernel configs, so it would be good to see what sort of size delta we are talking about. Bruce > meta-poky/conf/distro/poky-tiny.conf | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-11 1:52 ` [PATCH 0/1] " Bruce Ashfield @ 2016-04-11 2:40 ` Robert Yang 2016-04-11 13:24 ` Bruce Ashfield 0 siblings, 1 reply; 13+ messages in thread From: Robert Yang @ 2016-04-11 2:40 UTC (permalink / raw) To: Bruce Ashfield, poky [-- Attachment #1: Type: text/plain, Size: 1762 bytes --] On 04/11/2016 09:52 AM, Bruce Ashfield wrote: > On 2016-04-10 10:22 AM, Robert Yang wrote: >> The following changes since commit 778121ab844af623a215430ba579a5fb3947928b: >> >> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >> (2016-04-09 23:00:46 +0100) >> >> are available in the git repository at: >> >> git://git.pokylinux.org/poky-contrib rbt/kernel >> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >> >> Robert Yang (1): >> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >> > > Can you provide some bootlogs ? Size information, etc ? When we jump > this between kernel versions, we need to log some sort of information > about functionality and the size of the image. > > I've been carrying this support forward, but in 4.4, we did change > some of the kernel configs, so it would be good to see what sort of > size delta we are talking about. * Size: $ du -s tmp/deploy/images/qemux86/bzImage* 2664 tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin 2572 tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin We can see that 4.1 and 4.4 are nearly the same (92K different). And: $ runqemu qemux86 ramfs works well. Please see the boot logs in the attachment. And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two enhancements for YP 2.2 to support more machines and fs types: https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 // Robert > > Bruce > >> meta-poky/conf/distro/poky-tiny.conf | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> > > [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: tiny_boot.log --] [-- Type: text/x-log; name="tiny_boot.log", Size: 16407 bytes --] Continuing with the following parameters: KERNEL: [/buildarea/lyang1/test_tiny/tmp/deploy/images/qemux86/bzImage-qemux86.bin] ROOTFS: [/buildarea/lyang1/test_tiny/tmp/deploy/images/qemux86/core-image-minimal-qemux86-20160410124846.rootfs.cpio.gz] FSTYPE: [cpio.gz] Acquiring lockfile for tap0... Setting up tap interface under sudo Acquiring lockfile for tap1... -initrd /buildarea/lyang1/test_tiny/tmp/deploy/images/qemux86/core-image-minimal-qemux86-20160410124846.rootfs.cpio.gz -nographic -m 256 Running qemu-system-i386... /buildarea/lyang1/test_tiny/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-i386 -kernel /buildarea/lyang1/test_tiny/tmp/deploy/images/qemux86/bzImage-qemux86.bin -initrd /buildarea/lyang1/test_tiny/tmp/deploy/images/qemux86/core-image-minimal-qemux86-20160410124846.rootfs.cpio.gz -nographic -no-reboot -m 256 -serial mon:stdio -serial null -append "root=/dev/ram0 console=ttyS0 debugshell " [ 0.000000] Linux version 4.4.3-yocto-tiny (lyang1@ala-blade47) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Sun Apr 10 18:59:26 PDT 2016 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffe0000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] e820: last_pfn = 0xffe0 max_arch_pfn = 0x100000 [ 0.000000] MTRR: Disabled [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x0ff2c000-0x0ffdffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F62D0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000000FFE16B4 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000000FFE0BDA 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000000FFE0040 000B9A (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000000FFE0000 000040 [ 0.000000] ACPI: SSDT 0x000000000FFE0C4E 0009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x000000000FFE1604 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000000FFE167C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0ffe0000 [ 0.000000] low ram: 0 - 0ffe0000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000001000-0x000000000ffdffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000ffdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffdffff] [ 0.000000] Using APIC driver default [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x10000000-0xfffbffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 16 pages/cpu @cfd19000 s35660 r0 d29876 u65536 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64894 [ 0.000000] Kernel command line: root=/dev/ram0 console=ttyS0 debugshell [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 252512K/261624K available (3645K kernel code, 253K rwdata, 1432K rodata, 284K init, 300K bss, 9112K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd07e0000 - 0xff7fe000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcffe0000 ( 255 MB) [ 0.000000] .init : 0xc1538000 - 0xc157f000 ( 284 kB) [ 0.000000] .data : 0xc138f9f7 - 0xc15365c0 (1690 kB) [ 0.000000] .text : 0xc1000000 - 0xc138f9f7 (3646 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using HPET reference calibration [ 0.000000] tsc: Detected 2600.004 MHz processor [ 0.006369] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.00 BogoMIPS (lpj=2600004) [ 0.007568] pid_max: default: 4096 minimum: 301 [ 0.008067] ACPI: Core revision 20150930 [ 0.039058] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.040162] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.040477] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.047756] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.047958] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.079046] Freeing SMP alternatives memory: 20K (c157f000 - c1584000) [ 0.087689] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.091000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.202508] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) [ 0.203413] Performance Events: Broken PMU hardware detected, using software events only. [ 0.203897] Failed to access perfctr msr (MSR c2 is 0) [ 0.215445] x86: Booted up 1 node, 1 CPUs [ 0.215656] smpboot: Total of 1 processors activated (5200.00 BogoMIPS) [ 0.224316] devtmpfs: initialized [ 0.230186] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.231440] pinctrl core: initialized pinctrl subsystem [ 0.237353] NET: Registered protocol family 16 [ 0.241762] ACPI: bus type PCI registered [ 0.244440] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0 [ 0.244691] PCI: Using configuration type 1 for base access [ 0.274929] ACPI: Added _OSI(Module Device) [ 0.275047] ACPI: Added _OSI(Processor Device) [ 0.275202] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.275360] ACPI: Added _OSI(Processor Aggregator Device) [ 0.300343] ACPI: Interpreter enabled [ 0.300812] ACPI: (supports S0 S5) [ 0.301019] ACPI: Using IOAPIC for interrupt routing [ 0.301557] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.346334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.348320] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.348699] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.349244] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.351794] PCI host bridge to bus 0000:00 [ 0.352152] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.352398] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.352635] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.352879] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window] [ 0.353104] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.361856] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.362059] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.362337] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.362587] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.385242] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.386486] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.387450] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.388408] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.388949] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.391313] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.393435] SCSI subsystem initialized [ 0.395208] ACPI: bus type USB registered [ 0.395816] usbcore: registered new interface driver usbfs [ 0.396324] usbcore: registered new interface driver hub [ 0.396765] usbcore: registered new device driver usb [ 0.397530] pps_core: LinuxPPS API ver. 1 registered [ 0.397704] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.398137] PTP clock support registered [ 0.398626] PCI: Using ACPI for IRQ routing [ 0.405198] Bluetooth: Core ver 2.21 [ 0.405447] NET: Registered protocol family 31 [ 0.405611] Bluetooth: HCI device and connection manager initialized [ 0.405929] Bluetooth: HCI socket layer initialized [ 0.406094] Bluetooth: L2CAP socket layer initialized [ 0.407091] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.407536] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.407816] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.412631] clocksource: Switched to clocksource hpet [ 0.416392] pnp: PnP ACPI init [ 0.423809] pnp: PnP ACPI: found 7 devices [ 0.449277] NET: Registered protocol family 2 [ 0.452564] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.452926] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.453351] TCP: Hash tables configured (established 2048 bind 2048) [ 0.454260] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.454543] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.455896] NET: Registered protocol family 1 [ 0.460674] Trying to unpack rootfs image as initramfs... [ 0.630274] Freeing initrd memory: 720K (cff2c000 - cffe0000) [ 0.632892] Scanning for low memory corruption every 60 seconds [ 0.637392] futex hash table entries: 16 (order: -2, 1024 bytes) [ 0.674624] io scheduler noop registered [ 0.674819] io scheduler deadline registered [ 0.675206] io scheduler cfq registered (default) [ 0.676277] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.678450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.679214] ACPI: Power Button [PWRF] [ 0.680590] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.703478] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.725238] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.729345] Linux agpgart interface v0.103 [ 0.730520] [drm] Initialized drm 1.1.0 20060810 [ 0.743924] brd: module loaded [ 0.744207] Uniform Multi-Platform E-IDE driver [ 0.744789] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 0.746483] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 0.747612] ide0: BM-DMA at 0xc040-0xc047 [ 0.748305] ide1: BM-DMA at 0xc048-0xc04f [ 1.631376] tsc: Refined TSC clocksource calibration: 2600.004 MHz [ 1.631648] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3ff7d60, max_idle_ns: 440795222870 ns [ 1.939546] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 2.552581] hdc: MWDMA2 mode selected [ 2.553469] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.553755] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.557487] ide-gd driver 1.18 [ 2.557826] ide-cd driver 5.00 [ 2.562813] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache [ 2.563254] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.567984] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 2.568665] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.568869] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.569316] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.569547] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.635342] clocksource: Switched to clocksource tsc [ 2.894699] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 3.175050] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 3.175492] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.176214] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.176406] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.176815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.177147] ehci-pci: EHCI PCI platform driver [ 3.177518] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.177794] uhci_hcd: USB Universal Host Controller Interface driver [ 3.178865] usbcore: registered new interface driver usbserial [ 3.179289] usbcore: registered new interface driver usbserial_generic [ 3.179694] usbserial: USB Serial support registered for generic [ 3.180121] usbcore: registered new interface driver ftdi_sio [ 3.180422] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.180759] usbcore: registered new interface driver pl2303 [ 3.181110] usbserial: USB Serial support registered for pl2303 [ 3.182148] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.184454] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.185367] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.186756] mousedev: PS/2 mouse device common for all mice [ 3.189918] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.193580] rtc_cmos 00:00: RTC can wake from S4 [ 3.195348] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 3.198847] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 3.199300] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 3.200539] usbcore: registered new interface driver usbhid [ 3.200733] usbhid: USB HID core driver [ 3.202284] NET: Registered protocol family 17 [ 3.202570] mce: Unable to init device /dev/mcelog (rc: -5) [ 3.203774] microcode: CPU0 sig=0x663, pf=0x1, revision=0x0 [ 3.204485] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 3.204862] Using IPI Shortcut mode [ 3.212493] console [netcon0] enabled [ 3.212652] netconsole: network logging started [ 3.254736] Freeing unused kernel memory: 284K (c1538000 - c157f000) / # QEMU: Terminated \rSet 'tap1' nonpersistent Releasing lockfile of preconfigured tap device 'tap1' ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-11 2:40 ` Robert Yang @ 2016-04-11 13:24 ` Bruce Ashfield 2016-04-11 13:36 ` Khem Raj 2016-04-18 2:47 ` Robert Yang 0 siblings, 2 replies; 13+ messages in thread From: Bruce Ashfield @ 2016-04-11 13:24 UTC (permalink / raw) To: Robert Yang, poky On 2016-04-10 10:40 PM, Robert Yang wrote: > > > On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >> On 2016-04-10 10:22 AM, Robert Yang wrote: >>> The following changes since commit >>> 778121ab844af623a215430ba579a5fb3947928b: >>> >>> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >>> (2016-04-09 23:00:46 +0100) >>> >>> are available in the git repository at: >>> >>> git://git.pokylinux.org/poky-contrib rbt/kernel >>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>> >>> Robert Yang (1): >>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>> >> >> Can you provide some bootlogs ? Size information, etc ? When we jump >> this between kernel versions, we need to log some sort of information >> about functionality and the size of the image. >> >> I've been carrying this support forward, but in 4.4, we did change >> some of the kernel configs, so it would be good to see what sort of >> size delta we are talking about. > > * Size: > $ du -s tmp/deploy/images/qemux86/bzImage* > 2664 > tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin > > 2572 > tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin > > > We can see that 4.1 and 4.4 are nearly the same (92K different). Excellent. That is good news. > > And: > $ runqemu qemux86 ramfs > works well. Please see the boot logs in the attachment. perfect. Thanks! > > And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two > enhancements > for YP 2.2 to support more machines and fs types: > As long as it doesn't add too much extra functionality, it makes sense. Tiny turns pretty much everything off on purpose, since it forms a baseline that we do expect users to extend or add their own configs. It is much easier to add, then to subtract. Thanks for the extra details here. As long as RP is willing to merge this patch for the 2.1 release, I have no objections. Bruce > https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 > > https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 > > // Robert > >> >> Bruce >> >>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >> >> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-11 13:24 ` Bruce Ashfield @ 2016-04-11 13:36 ` Khem Raj 2016-04-12 1:18 ` Robert Yang 2016-04-18 2:47 ` Robert Yang 1 sibling, 1 reply; 13+ messages in thread From: Khem Raj @ 2016-04-11 13:36 UTC (permalink / raw) To: Bruce Ashfield; +Cc: poky [-- Attachment #1: Type: text/plain, Size: 3035 bytes --] > On Apr 11, 2016, at 9:24 AM, Bruce Ashfield <bruce.ashfield@windriver.com> wrote: > > On 2016-04-10 10:40 PM, Robert Yang wrote: >> >> >> On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >>> On 2016-04-10 10:22 AM, Robert Yang wrote: >>>> The following changes since commit >>>> 778121ab844af623a215430ba579a5fb3947928b: >>>> >>>> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >>>> (2016-04-09 23:00:46 +0100) >>>> >>>> are available in the git repository at: >>>> >>>> git://git.pokylinux.org/poky-contrib rbt/kernel >>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>>> >>>> Robert Yang (1): >>>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>>> >>> >>> Can you provide some bootlogs ? Size information, etc ? When we jump >>> this between kernel versions, we need to log some sort of information >>> about functionality and the size of the image. >>> >>> I've been carrying this support forward, but in 4.4, we did change >>> some of the kernel configs, so it would be good to see what sort of >>> size delta we are talking about. >> >> * Size: >> $ du -s tmp/deploy/images/qemux86/bzImage* >> 2664 >> tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin >> >> 2572 >> tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin >> >> >> We can see that 4.1 and 4.4 are nearly the same (92K different). > > Excellent. That is good news. I looked at it briefly, and I see that we don’t have n/w enabled and this kernel is sort of crippled if we don’t have /proc/sys/ can you enable CONFIG_PROC_SYSCTL and see how much size it increased. Because this would pave way to enable busybox-mdev for device management among other things you could do with sysctls > >> >> And: >> $ runqemu qemux86 ramfs >> works well. Please see the boot logs in the attachment. > > perfect. Thanks! > >> >> And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two >> enhancements >> for YP 2.2 to support more machines and fs types: >> > > As long as it doesn't add too much extra functionality, it makes sense. > Tiny turns pretty much everything off on purpose, since it forms a > baseline that we do expect users to extend or add their own configs. It > is much easier to add, then to subtract. > > Thanks for the extra details here. As long as RP is willing to merge > this patch for the 2.1 release, I have no objections. > > Bruce > >> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 >> >> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 >> >> // Robert >> >>> >>> Bruce >>> >>>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>> >>> > > -- > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky [-- Attachment #2: Message signed with OpenPGP using GPGMail --] [-- Type: application/pgp-signature, Size: 211 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-11 13:36 ` Khem Raj @ 2016-04-12 1:18 ` Robert Yang 0 siblings, 0 replies; 13+ messages in thread From: Robert Yang @ 2016-04-12 1:18 UTC (permalink / raw) To: Khem Raj, Bruce Ashfield; +Cc: poky On 04/11/2016 09:36 PM, Khem Raj wrote: > >> On Apr 11, 2016, at 9:24 AM, Bruce Ashfield <bruce.ashfield@windriver.com> wrote: >> >> On 2016-04-10 10:40 PM, Robert Yang wrote: >>> >>> >>> On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >>>> On 2016-04-10 10:22 AM, Robert Yang wrote: >>>>> The following changes since commit >>>>> 778121ab844af623a215430ba579a5fb3947928b: >>>>> >>>>> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >>>>> (2016-04-09 23:00:46 +0100) >>>>> >>>>> are available in the git repository at: >>>>> >>>>> git://git.pokylinux.org/poky-contrib rbt/kernel >>>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>>>> >>>>> Robert Yang (1): >>>>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>>>> >>>> >>>> Can you provide some bootlogs ? Size information, etc ? When we jump >>>> this between kernel versions, we need to log some sort of information >>>> about functionality and the size of the image. >>>> >>>> I've been carrying this support forward, but in 4.4, we did change >>>> some of the kernel configs, so it would be good to see what sort of >>>> size delta we are talking about. >>> >>> * Size: >>> $ du -s tmp/deploy/images/qemux86/bzImage* >>> 2664 >>> tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin >>> >>> 2572 >>> tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin >>> >>> >>> We can see that 4.1 and 4.4 are nearly the same (92K different). >> >> Excellent. That is good news. > > I looked at it briefly, and I see that we don’t have n/w enabled and this kernel is sort of crippled if > we don’t have /proc/sys/ can you enable CONFIG_PROC_SYSCTL and see how much size it increased. Because Good catch, I tried it, for 4.4: 2664K -> 2680K 16K has increased, the similar to 4.1 (2572 -> 2588), neither of them has /proc/sys. I will send patches for updating the config, Bruce can decide whether merge them or not. // Robert > this would pave way to enable busybox-mdev for device management among other things you could do > with sysctls > >> >>> >>> And: >>> $ runqemu qemux86 ramfs >>> works well. Please see the boot logs in the attachment. >> >> perfect. Thanks! >> >>> >>> And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two >>> enhancements >>> for YP 2.2 to support more machines and fs types: >>> >> >> As long as it doesn't add too much extra functionality, it makes sense. >> Tiny turns pretty much everything off on purpose, since it forms a >> baseline that we do expect users to extend or add their own configs. It >> is much easier to add, then to subtract. >> >> Thanks for the extra details here. As long as RP is willing to merge >> this patch for the 2.1 release, I have no objections. >> >> Bruce >> >>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 >>> >>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 >>> >>> // Robert >>> >>>> >>>> Bruce >>>> >>>>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>> >>>> >>>> >> >> -- >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-11 13:24 ` Bruce Ashfield 2016-04-11 13:36 ` Khem Raj @ 2016-04-18 2:47 ` Robert Yang 2016-04-18 5:18 ` Khem Raj 1 sibling, 1 reply; 13+ messages in thread From: Robert Yang @ 2016-04-18 2:47 UTC (permalink / raw) To: Richard Purdie; +Cc: poky On 04/11/2016 09:24 PM, Bruce Ashfield wrote: > On 2016-04-10 10:40 PM, Robert Yang wrote: >> >> >> On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >>> On 2016-04-10 10:22 AM, Robert Yang wrote: >>>> The following changes since commit >>>> 778121ab844af623a215430ba579a5fb3947928b: >>>> >>>> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >>>> (2016-04-09 23:00:46 +0100) >>>> >>>> are available in the git repository at: >>>> >>>> git://git.pokylinux.org/poky-contrib rbt/kernel >>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>>> >>>> Robert Yang (1): >>>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>>> >>> >>> Can you provide some bootlogs ? Size information, etc ? When we jump >>> this between kernel versions, we need to log some sort of information >>> about functionality and the size of the image. >>> >>> I've been carrying this support forward, but in 4.4, we did change >>> some of the kernel configs, so it would be good to see what sort of >>> size delta we are talking about. >> >> * Size: >> $ du -s tmp/deploy/images/qemux86/bzImage* >> 2664 >> tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin >> >> >> 2572 >> tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin >> >> >> >> We can see that 4.1 and 4.4 are nearly the same (92K different). > > Excellent. That is good news. > >> >> And: >> $ runqemu qemux86 ramfs >> works well. Please see the boot logs in the attachment. > > perfect. Thanks! > >> >> And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two >> enhancements >> for YP 2.2 to support more machines and fs types: >> > > As long as it doesn't add too much extra functionality, it makes sense. > Tiny turns pretty much everything off on purpose, since it forms a > baseline that we do expect users to extend or add their own configs. It > is much easier to add, then to subtract. > > Thanks for the extra details here. As long as RP is willing to merge > this patch for the 2.1 release, I have no objections. Hi RP, What's you opinion, please ? // Robert > > Bruce > >> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 >> >> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 >> >> // Robert >> >>> >>> Bruce >>> >>>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>> >>> > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-18 2:47 ` Robert Yang @ 2016-04-18 5:18 ` Khem Raj 2016-04-18 5:44 ` Robert Yang 0 siblings, 1 reply; 13+ messages in thread From: Khem Raj @ 2016-04-18 5:18 UTC (permalink / raw) To: Robert Yang; +Cc: poky [-- Attachment #1: Type: text/plain, Size: 3079 bytes --] > On Apr 17, 2016, at 7:47 PM, Robert Yang <liezhi.yang@windriver.com> wrote: > > > > On 04/11/2016 09:24 PM, Bruce Ashfield wrote: >> On 2016-04-10 10:40 PM, Robert Yang wrote: >>> >>> >>> On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >>>> On 2016-04-10 10:22 AM, Robert Yang wrote: >>>>> The following changes since commit >>>>> 778121ab844af623a215430ba579a5fb3947928b: >>>>> >>>>> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >>>>> (2016-04-09 23:00:46 +0100) >>>>> >>>>> are available in the git repository at: >>>>> >>>>> git://git.pokylinux.org/poky-contrib rbt/kernel >>>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>>>> >>>>> Robert Yang (1): >>>>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>>>> >>>> >>>> Can you provide some bootlogs ? Size information, etc ? When we jump >>>> this between kernel versions, we need to log some sort of information >>>> about functionality and the size of the image. >>>> >>>> I've been carrying this support forward, but in 4.4, we did change >>>> some of the kernel configs, so it would be good to see what sort of >>>> size delta we are talking about. >>> >>> * Size: >>> $ du -s tmp/deploy/images/qemux86/bzImage* >>> 2664 >>> tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin >>> >>> >>> 2572 >>> tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin >>> >>> >>> >>> We can see that 4.1 and 4.4 are nearly the same (92K different). >> >> Excellent. That is good news. >> >>> >>> And: >>> $ runqemu qemux86 ramfs >>> works well. Please see the boot logs in the attachment. >> >> perfect. Thanks! >> >>> >>> And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two >>> enhancements >>> for YP 2.2 to support more machines and fs types: >>> >> >> As long as it doesn't add too much extra functionality, it makes sense. >> Tiny turns pretty much everything off on purpose, since it forms a >> baseline that we do expect users to extend or add their own configs. It >> is much easier to add, then to subtract. >> >> Thanks for the extra details here. As long as RP is willing to merge >> this patch for the 2.1 release, I have no objections. > > Hi RP, > > What's you opinion, please ? We should bump to 4.4 and another patch which limits the linux-yocto to qemux86 only should be applied too so we can use poky-tiny beyond qemux86 > > // Robert > > >> >> Bruce >> >>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 >>> >>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 >>> >>> // Robert >>> >>>> >>>> Bruce >>>> >>>>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>> >>>> >>>> >> >> > -- > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky [-- Attachment #2: Message signed with OpenPGP using GPGMail --] [-- Type: application/pgp-signature, Size: 211 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-18 5:18 ` Khem Raj @ 2016-04-18 5:44 ` Robert Yang 2016-04-18 11:37 ` Khem Raj 0 siblings, 1 reply; 13+ messages in thread From: Robert Yang @ 2016-04-18 5:44 UTC (permalink / raw) To: Khem Raj; +Cc: poky On 04/18/2016 01:18 PM, Khem Raj wrote: > >> On Apr 17, 2016, at 7:47 PM, Robert Yang <liezhi.yang@windriver.com> wrote: >> >> >> >> On 04/11/2016 09:24 PM, Bruce Ashfield wrote: >>> On 2016-04-10 10:40 PM, Robert Yang wrote: >>>> >>>> >>>> On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >>>>> On 2016-04-10 10:22 AM, Robert Yang wrote: >>>>>> The following changes since commit >>>>>> 778121ab844af623a215430ba579a5fb3947928b: >>>>>> >>>>>> local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES >>>>>> (2016-04-09 23:00:46 +0100) >>>>>> >>>>>> are available in the git repository at: >>>>>> >>>>>> git://git.pokylinux.org/poky-contrib rbt/kernel >>>>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>>>>> >>>>>> Robert Yang (1): >>>>>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>>>>> >>>>> >>>>> Can you provide some bootlogs ? Size information, etc ? When we jump >>>>> this between kernel versions, we need to log some sort of information >>>>> about functionality and the size of the image. >>>>> >>>>> I've been carrying this support forward, but in 4.4, we did change >>>>> some of the kernel configs, so it would be good to see what sort of >>>>> size delta we are talking about. >>>> >>>> * Size: >>>> $ du -s tmp/deploy/images/qemux86/bzImage* >>>> 2664 >>>> tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin >>>> >>>> >>>> 2572 >>>> tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin >>>> >>>> >>>> >>>> We can see that 4.1 and 4.4 are nearly the same (92K different). >>> >>> Excellent. That is good news. >>> >>>> >>>> And: >>>> $ runqemu qemux86 ramfs >>>> works well. Please see the boot logs in the attachment. >>> >>> perfect. Thanks! >>> >>>> >>>> And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two >>>> enhancements >>>> for YP 2.2 to support more machines and fs types: >>>> >>> >>> As long as it doesn't add too much extra functionality, it makes sense. >>> Tiny turns pretty much everything off on purpose, since it forms a >>> baseline that we do expect users to extend or add their own configs. It >>> is much easier to add, then to subtract. >>> >>> Thanks for the extra details here. As long as RP is willing to merge >>> this patch for the 2.1 release, I have no objections. >> >> Hi RP, >> >> What's you opinion, please ? > > We should bump to 4.4 and another patch which limits the linux-yocto to qemux86 only > should be applied too so we can use poky-tiny beyond qemux86 Another patch had been merged already. commit 3ad70a599f78f645dc212ef7f5fa49ccce3ef1f7 Author: Robert Yang <liezhi.yang@windriver.com> Date: Mon Apr 11 01:53:21 2016 -0700 linux-yocto-tiny: fix COMPATIBLE_MACHINE It only works with qemux86, but mismatched qemux86-64 which caused runtime errros. (kernel is bigger, can't boot, no output, and so on). Add '$' in the end to fix the problem. (From OE-Core rev: 8069399d9fd29428b8f3d3db419b81913b57f997) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> // Robert > >> >> // Robert >> >> >>> >>> Bruce >>> >>>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 >>>> >>>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 >>>> >>>> // Robert >>>> >>>>> >>>>> Bruce >>>>> >>>>>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>>> >>>>> >>>>> >>> >>> >> -- >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-18 5:44 ` Robert Yang @ 2016-04-18 11:37 ` Khem Raj 2016-04-19 1:23 ` Robert Yang 0 siblings, 1 reply; 13+ messages in thread From: Khem Raj @ 2016-04-18 11:37 UTC (permalink / raw) To: Robert Yang; +Cc: poky [-- Attachment #1: Type: text/plain, Size: 4206 bytes --] You are talking about different problem. On Apr 17, 2016 10:44 PM, "Robert Yang" <liezhi.yang@windriver.com> wrote: > > > On 04/18/2016 01:18 PM, Khem Raj wrote: > >> >> On Apr 17, 2016, at 7:47 PM, Robert Yang <liezhi.yang@windriver.com> >>> wrote: >>> >>> >>> >>> On 04/11/2016 09:24 PM, Bruce Ashfield wrote: >>> >>>> On 2016-04-10 10:40 PM, Robert Yang wrote: >>>> >>>>> >>>>> >>>>> On 04/11/2016 09:52 AM, Bruce Ashfield wrote: >>>>> >>>>>> On 2016-04-10 10:22 AM, Robert Yang wrote: >>>>>> >>>>>>> The following changes since commit >>>>>>> 778121ab844af623a215430ba579a5fb3947928b: >>>>>>> >>>>>>> local.conf.sample: Make it possible to override >>>>>>> EXTRA_IMAGE_FEATURES >>>>>>> (2016-04-09 23:00:46 +0100) >>>>>>> >>>>>>> are available in the git repository at: >>>>>>> >>>>>>> git://git.pokylinux.org/poky-contrib rbt/kernel >>>>>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel >>>>>>> >>>>>>> Robert Yang (1): >>>>>>> poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 >>>>>>> >>>>>>> >>>>>> Can you provide some bootlogs ? Size information, etc ? When we jump >>>>>> this between kernel versions, we need to log some sort of information >>>>>> about functionality and the size of the image. >>>>>> >>>>>> I've been carrying this support forward, but in 4.4, we did change >>>>>> some of the kernel configs, so it would be good to see what sort of >>>>>> size delta we are talking about. >>>>>> >>>>> >>>>> * Size: >>>>> $ du -s tmp/deploy/images/qemux86/bzImage* >>>>> 2664 >>>>> >>>>> tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin >>>>> >>>>> >>>>> 2572 >>>>> >>>>> tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin >>>>> >>>>> >>>>> >>>>> We can see that 4.1 and 4.4 are nearly the same (92K different). >>>>> >>>> >>>> Excellent. That is good news. >>>> >>>> >>>>> And: >>>>> $ runqemu qemux86 ramfs >>>>> works well. Please see the boot logs in the attachment. >>>>> >>>> >>>> perfect. Thanks! >>>> >>>> >>>>> And poky-tiny only supports qemux86 + cpio.gz atm, I've filed two >>>>> enhancements >>>>> for YP 2.2 to support more machines and fs types: >>>>> >>>>> >>>> As long as it doesn't add too much extra functionality, it makes sense. >>>> Tiny turns pretty much everything off on purpose, since it forms a >>>> baseline that we do expect users to extend or add their own configs. It >>>> is much easier to add, then to subtract. >>>> >>>> Thanks for the extra details here. As long as RP is willing to merge >>>> this patch for the 2.1 release, I have no objections. >>>> >>> >>> Hi RP, >>> >>> What's you opinion, please ? >>> >> >> We should bump to 4.4 and another patch which limits the linux-yocto to >> qemux86 only >> should be applied too so we can use poky-tiny beyond qemux86 >> > > Another patch had been merged already. > > commit 3ad70a599f78f645dc212ef7f5fa49ccce3ef1f7 > Author: Robert Yang <liezhi.yang@windriver.com> > Date: Mon Apr 11 01:53:21 2016 -0700 > > linux-yocto-tiny: fix COMPATIBLE_MACHINE > > It only works with qemux86, but mismatched qemux86-64 which caused > runtime errros. (kernel is bigger, can't boot, no output, and so on). > > Add '$' in the end to fix the problem. > > (From OE-Core rev: 8069399d9fd29428b8f3d3db419b81913b57f997) > > Signed-off-by: Robert Yang <liezhi.yang@windriver.com> > Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> > > > // Robert > > >> >>> // Robert >>> >>> >>> >>>> Bruce >>>> >>>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 >>>>> >>>>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 >>>>> >>>>> // Robert >>>>> >>>>> >>>>>> Bruce >>>>>> >>>>>> meta-poky/conf/distro/poky-tiny.conf | 2 +- >>>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>>>> >>>>>>> >>>>>> >>>>>> >>>> >>>> -- >>> _______________________________________________ >>> poky mailing list >>> poky@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/poky >>> >> >> [-- Attachment #2: Type: text/html, Size: 6828 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-18 11:37 ` Khem Raj @ 2016-04-19 1:23 ` Robert Yang 2016-04-20 2:50 ` Khem Raj 0 siblings, 1 reply; 13+ messages in thread From: Robert Yang @ 2016-04-19 1:23 UTC (permalink / raw) To: Khem Raj; +Cc: poky On 04/18/2016 07:37 PM, Khem Raj wrote: > You are talking about different problem. What did you mean, please ? // Robert > > On Apr 17, 2016 10:44 PM, "Robert Yang" <liezhi.yang@windriver.com > <mailto:liezhi.yang@windriver.com>> wrote: > > > > On 04/18/2016 01:18 PM, Khem Raj wrote: > > > On Apr 17, 2016, at 7:47 PM, Robert Yang <liezhi.yang@windriver.com > <mailto:liezhi.yang@windriver.com>> wrote: > > > > On 04/11/2016 09:24 PM, Bruce Ashfield wrote: > > On 2016-04-10 10:40 PM, Robert Yang wrote: > > > > On 04/11/2016 09:52 AM, Bruce Ashfield wrote: > > On 2016-04-10 10:22 AM, Robert Yang wrote: > > The following changes since commit > 778121ab844af623a215430ba579a5fb3947928b: > > local.conf.sample: Make it possible to override > EXTRA_IMAGE_FEATURES > (2016-04-09 23:00:46 +0100) > > are available in the git repository at: > > git://git.pokylinux.org/poky-contrib > <http://git.pokylinux.org/poky-contrib> rbt/kernel > http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rbt/kernel > > Robert Yang (1): > poky-tiny.conf: set > PREFERRED_VERSION_linux-yocto-tiny to 4.4 > > > Can you provide some bootlogs ? Size information, etc ? > When we jump > this between kernel versions, we need to log some sort > of information > about functionality and the size of the image. > > I've been carrying this support forward, but in 4.4, we > did change > some of the kernel configs, so it would be good to see > what sort of > size delta we are talking about. > > > * Size: > $ du -s tmp/deploy/images/qemux86/bzImage* > 2664 > tmp/deploy/images/qemux86/bzImage--4.4.3+git0+770996a263_73481a3abd-r0-qemux86-20160411015757.bin > > > 2572 > tmp/deploy/images/qemux86/bzImage--4.1.18+git0+b9023d4c8f_f5b08e95bc-r0-qemux86-20160411022834.bin > > > > We can see that 4.1 and 4.4 are nearly the same (92K different). > > > Excellent. That is good news. > > > And: > $ runqemu qemux86 ramfs > works well. Please see the boot logs in the attachment. > > > perfect. Thanks! > > > And poky-tiny only supports qemux86 + cpio.gz atm, I've > filed two > enhancements > for YP 2.2 to support more machines and fs types: > > > As long as it doesn't add too much extra functionality, it makes > sense. > Tiny turns pretty much everything off on purpose, since it forms a > baseline that we do expect users to extend or add their own > configs. It > is much easier to add, then to subtract. > > Thanks for the extra details here. As long as RP is willing to merge > this patch for the 2.1 release, I have no objections. > > > Hi RP, > > What's you opinion, please ? > > > We should bump to 4.4 and another patch which limits the linux-yocto to > qemux86 only > should be applied too so we can use poky-tiny beyond qemux86 > > > Another patch had been merged already. > > commit 3ad70a599f78f645dc212ef7f5fa49ccce3ef1f7 > Author: Robert Yang <liezhi.yang@windriver.com > <mailto:liezhi.yang@windriver.com>> > Date: Mon Apr 11 01:53:21 2016 -0700 > > linux-yocto-tiny: fix COMPATIBLE_MACHINE > > It only works with qemux86, but mismatched qemux86-64 which caused > runtime errros. (kernel is bigger, can't boot, no output, and so on). > > Add '$' in the end to fix the problem. > > (From OE-Core rev: 8069399d9fd29428b8f3d3db419b81913b57f997) > > Signed-off-by: Robert Yang <liezhi.yang@windriver.com > <mailto:liezhi.yang@windriver.com>> > Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org > <mailto:richard.purdie@linuxfoundation.org>> > > > // Robert > > > > // Robert > > > > Bruce > > https://bugzilla.yoctoproject.org/show_bug.cgi?id=9428 > > https://bugzilla.yoctoproject.org/show_bug.cgi?id=9429 > > // Robert > > > Bruce > > meta-poky/conf/distro/poky-tiny.conf | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > -- > _______________________________________________ > poky mailing list > poky@yoctoproject.org <mailto:poky@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/poky > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 2016-04-19 1:23 ` Robert Yang @ 2016-04-20 2:50 ` Khem Raj 0 siblings, 0 replies; 13+ messages in thread From: Khem Raj @ 2016-04-20 2:50 UTC (permalink / raw) To: Robert Yang; +Cc: poky [-- Attachment #1: Type: text/plain, Size: 296 bytes --] > On Apr 18, 2016, at 6:23 PM, Robert Yang <liezhi.yang@windriver.com> wrote: > > > On 04/18/2016 07:37 PM, Khem Raj wrote: >> You are talking about different problem. > > What did you mean, please ? see https://lists.yoctoproject.org/pipermail/yocto/2016-April/029518.html [-- Attachment #2: Message signed with OpenPGP using GPGMail --] [-- Type: application/pgp-signature, Size: 211 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-04-20 2:50 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-04-10 14:22 [PATCH 0/1] poky-tiny.conf: set PREFERRED_VERSION_linux-yocto-tiny to 4.4 Robert Yang 2016-04-10 14:22 ` [PATCH 1/1] " Robert Yang 2016-04-11 1:52 ` [PATCH 0/1] " Bruce Ashfield 2016-04-11 2:40 ` Robert Yang 2016-04-11 13:24 ` Bruce Ashfield 2016-04-11 13:36 ` Khem Raj 2016-04-12 1:18 ` Robert Yang 2016-04-18 2:47 ` Robert Yang 2016-04-18 5:18 ` Khem Raj 2016-04-18 5:44 ` Robert Yang 2016-04-18 11:37 ` Khem Raj 2016-04-19 1:23 ` Robert Yang 2016-04-20 2:50 ` Khem Raj
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.