From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Shardar Shariff Md
<smohammed-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3] dmaengine: tegra-apb: proper default init of channel slave_id
Date: Fri, 22 Apr 2016 15:43:19 +0100 [thread overview]
Message-ID: <571A3887.4020704@nvidia.com> (raw)
In-Reply-To: <1461334479-27985-1-git-send-email-smohammed-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
On 22/04/16 15:14, Shardar Shariff Md wrote:
> Initialize default channel slave_id(req_sel) to invalid id
> (i.e max supported slave id + 1) to avoid overwriting of slave_id
> during tegra_dma_slave_config() with client data if slave_id
> is not initialized through DT
>
> Signed-off-by: Shardar Shariff Md <smohammed-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> ---
> Changes from v1:
> - Instead of initializing the slave id to -1 define macros for
> max slave id and invalid slave id and do the checks accordingly.
>
> Changes from v2:
> - Check slave id boundary before dma channel is allocated to
> avoid channel leakage.
> ---
> drivers/dma/tegra20-apb-dma.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> index 3871f29..f57cee85 100644
> --- a/drivers/dma/tegra20-apb-dma.c
> +++ b/drivers/dma/tegra20-apb-dma.c
> @@ -54,6 +54,7 @@
> #define TEGRA_APBDMA_CSR_ONCE BIT(27)
> #define TEGRA_APBDMA_CSR_FLOW BIT(21)
> #define TEGRA_APBDMA_CSR_REQ_SEL_SHIFT 16
> +#define TEGRA_APBDMA_CSR_REQ_SEL_MASK 0x1F
> #define TEGRA_APBDMA_CSR_WCOUNT_MASK 0xFFFC
>
> /* STATUS register */
> @@ -114,6 +115,9 @@
> /* Channel base address offset from APBDMA base address */
> #define TEGRA_APBDMA_CHANNEL_BASE_ADD_OFFSET 0x1000
>
> +#define TEGRA_APBDMA_SLAVE_ID_MAX TEGRA_APBDMA_CSR_REQ_SEL_MASK
> +#define TEGRA_APBDMA_SLAVE_ID_INVALID (TEGRA_APBDMA_SLAVE_ID_MAX + 1)
> +
> struct tegra_dma;
>
> /*
> @@ -353,7 +357,7 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
> }
>
> memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
> - if (!tdc->slave_id)
> + if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID)
> tdc->slave_id = sconfig->slave_id;
I think we still need to check sconfig->slave_id is less than the MAX here.
> tdc->config_init = true;
> return 0;
> @@ -1236,7 +1240,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
> }
> pm_runtime_put(tdma->dev);
>
> - tdc->slave_id = 0;
> + tdc->slave_id = TEGRA_APBDMA_SLAVE_ID_INVALID;
> }
>
> static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
> @@ -1245,13 +1249,20 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
> struct tegra_dma *tdma = ofdma->of_dma_data;
> struct dma_chan *chan;
> struct tegra_dma_channel *tdc;
> + unsigned int slave_id;
We don't need this definition.
> +
> + slave_id = dma_spec->args[0];
> + if (slave_id > TEGRA_APBDMA_SLAVE_ID_MAX) {
Use dma_spec->args[0] here directly.
> + dev_err(tdma->dev, "Invalid slave id: %d\n", slave_id);
And here.
Cheers
Jon
WARNING: multiple messages have this Message-ID (diff)
From: Jon Hunter <jonathanh@nvidia.com>
To: Shardar Shariff Md <smohammed@nvidia.com>, <ldewangan@nvidia.com>,
<vinod.koul@intel.com>, <dan.j.williams@intel.com>,
<swarren@wwwdotorg.org>, <thierry.reding@gmail.com>,
<gnurou@gmail.com>, <dmaengine@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3] dmaengine: tegra-apb: proper default init of channel slave_id
Date: Fri, 22 Apr 2016 15:43:19 +0100 [thread overview]
Message-ID: <571A3887.4020704@nvidia.com> (raw)
In-Reply-To: <1461334479-27985-1-git-send-email-smohammed@nvidia.com>
On 22/04/16 15:14, Shardar Shariff Md wrote:
> Initialize default channel slave_id(req_sel) to invalid id
> (i.e max supported slave id + 1) to avoid overwriting of slave_id
> during tegra_dma_slave_config() with client data if slave_id
> is not initialized through DT
>
> Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
>
> ---
> Changes from v1:
> - Instead of initializing the slave id to -1 define macros for
> max slave id and invalid slave id and do the checks accordingly.
>
> Changes from v2:
> - Check slave id boundary before dma channel is allocated to
> avoid channel leakage.
> ---
> drivers/dma/tegra20-apb-dma.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> index 3871f29..f57cee85 100644
> --- a/drivers/dma/tegra20-apb-dma.c
> +++ b/drivers/dma/tegra20-apb-dma.c
> @@ -54,6 +54,7 @@
> #define TEGRA_APBDMA_CSR_ONCE BIT(27)
> #define TEGRA_APBDMA_CSR_FLOW BIT(21)
> #define TEGRA_APBDMA_CSR_REQ_SEL_SHIFT 16
> +#define TEGRA_APBDMA_CSR_REQ_SEL_MASK 0x1F
> #define TEGRA_APBDMA_CSR_WCOUNT_MASK 0xFFFC
>
> /* STATUS register */
> @@ -114,6 +115,9 @@
> /* Channel base address offset from APBDMA base address */
> #define TEGRA_APBDMA_CHANNEL_BASE_ADD_OFFSET 0x1000
>
> +#define TEGRA_APBDMA_SLAVE_ID_MAX TEGRA_APBDMA_CSR_REQ_SEL_MASK
> +#define TEGRA_APBDMA_SLAVE_ID_INVALID (TEGRA_APBDMA_SLAVE_ID_MAX + 1)
> +
> struct tegra_dma;
>
> /*
> @@ -353,7 +357,7 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
> }
>
> memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
> - if (!tdc->slave_id)
> + if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID)
> tdc->slave_id = sconfig->slave_id;
I think we still need to check sconfig->slave_id is less than the MAX here.
> tdc->config_init = true;
> return 0;
> @@ -1236,7 +1240,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
> }
> pm_runtime_put(tdma->dev);
>
> - tdc->slave_id = 0;
> + tdc->slave_id = TEGRA_APBDMA_SLAVE_ID_INVALID;
> }
>
> static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
> @@ -1245,13 +1249,20 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
> struct tegra_dma *tdma = ofdma->of_dma_data;
> struct dma_chan *chan;
> struct tegra_dma_channel *tdc;
> + unsigned int slave_id;
We don't need this definition.
> +
> + slave_id = dma_spec->args[0];
> + if (slave_id > TEGRA_APBDMA_SLAVE_ID_MAX) {
Use dma_spec->args[0] here directly.
> + dev_err(tdma->dev, "Invalid slave id: %d\n", slave_id);
And here.
Cheers
Jon
next prev parent reply other threads:[~2016-04-22 14:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-22 14:14 [PATCH v3] dmaengine: tegra-apb: proper default init of channel slave_id Shardar Shariff Md
2016-04-22 14:14 ` Shardar Shariff Md
2016-04-22 14:37 ` Thierry Reding
[not found] ` <1461334479-27985-1-git-send-email-smohammed-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-04-22 14:43 ` Jon Hunter [this message]
2016-04-22 14:43 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=571A3887.4020704@nvidia.com \
--to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=smohammed-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.