[PATCH v3 3/4] arm: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC

[vz@mleia.com (Vladimir Zapolskiy)]

Hi Sylvain,

On 26.04.2016 15:26, Sylvain Lemieux wrote:
> Hi Vladimir,
> 
> On Tue, 2016-04-26 at 00:02 +0300, Vladimir Zapolskiy wrote:
>> The change adds separate device nodes for SIC1 and SIC2 interrupt
>> controllers and reparents all defined SIC1 and SIC2 interrupt
>> producers to the correspondent interrupt controller, this is needed to
>> perform switching to a new LPC32xx MIC/SIC interrupt controller driver.
>>
>> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
>> ---
>> Changes from v2 to v3:
>> * fix io region size for MIC controller after moving SIC1/SIC2
>>   controllers out,
>> * move MIC 'reg' property up to follow 'compatible' property.
>>
>> Changes from v1 to v2:
>> * squashed two step change in lpc32xx.dtsi - new irqchip driver can be
>>   used (i.e. board boots with access to userspace) with old DTS file,
>>   so there is no need to fix DTS firstly and then switch to a new driver,
>> * removed "interrupt-controller-name" and "wakeup-sources" properties
>>   from all interrupt controllers,
>> * removed outdated comment.
>>
>>  arch/arm/boot/dts/lpc32xx.dtsi | 60 +++++++++++++++++++++++++++++-------------
>>  1 file changed, 42 insertions(+), 18 deletions(-)
>>
> Please use capital letter for the word ARM in the patch title.

right, I'll change it on application, thank you for review.

> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
> 

--
With best wishes,
Vladimir