[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Yisen Zhuang]

There are some inappropriate properties definition in hns DT. We update the definition
according to Rob's review comments and fix some typos in binding.

For more details, please see individual patches.

MBR.

Yisen Zhuang (4):
  net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon
    property
  net: hns: change port-id property to reg property in dsaf port node
  Documentation: Bindings: Update DT binding for hns dsaf node
  dts: hisi: update hns dst for changing property port-id to reg

 .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 28 +++++++++----------
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi       | 10 ++++---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c  | 32 ++++++++++++----------
 3 files changed, 36 insertions(+), 34 deletions(-)

-- 
1.9.1

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Yisen Zhuang]

There are some inappropriate properties definition in hns DT. We update the definition
according to Rob's review comments and fix some typos in binding.

For more details, please see individual patches.

MBR.

Yisen Zhuang (4):
  net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon
    property
  net: hns: change port-id property to reg property in dsaf port node
  Documentation: Bindings: Update DT binding for hns dsaf node
  dts: hisi: update hns dst for changing property port-id to reg

 .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 28 +++++++++----------
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi       | 10 ++++---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c  | 32 ++++++++++++----------
 3 files changed, 36 insertions(+), 34 deletions(-)

-- 
1.9.1

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Yisen Zhuang]

There are some inappropriate properties definition in hns DT. We update the definition
according to Rob's review comments and fix some typos in binding.

For more details, please see individual patches.

MBR.

Yisen Zhuang (4):
  net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon
    property
  net: hns: change port-id property to reg property in dsaf port node
  Documentation: Bindings: Update DT binding for hns dsaf node
  dts: hisi: update hns dst for changing property port-id to reg

 .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 28 +++++++++----------
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi       | 10 ++++---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c  | 32 ++++++++++++----------
 3 files changed, 36 insertions(+), 34 deletions(-)

-- 
1.9.1

[PATCH net-next 1/4] net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon property

[Yisen Zhuang]

Because cpld-ctrl-reg property is offset base on cpld-syscon property,
we make it as a cell in the cpld-syscon property.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 26 ++++++++++++-----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 1c8fdd3..210ba89 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -647,6 +647,7 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 {
 	struct device_node *np = mac_cb->dev->of_node;
 	struct regmap *syscon;
+	struct of_phandle_args cpld_args;
 	u32 ret;
 
 	mac_cb->link = false;
@@ -713,22 +714,23 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 			mac_cb->mac_id);
 	}
 
-	syscon = syscon_node_to_regmap(
-			of_parse_phandle(to_of_node(mac_cb->fw_port),
-					 "cpld-syscon", 0));
-	if (IS_ERR_OR_NULL(syscon)) {
-		dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
+	ret = of_parse_phandle_with_fixed_args(to_of_node(mac_cb->fw_port),
+					       "cpld-syscon", 1, 0, &cpld_args);
+	if (ret) {
+		dev_dbg(mac_cb->dev, "mac%d no cpld-syscon found.\n",
+			mac_cb->mac_id);
 		mac_cb->cpld_ctrl = NULL;
 	} else {
-		mac_cb->cpld_ctrl = syscon;
-		ret = fwnode_property_read_u32(mac_cb->fw_port,
-					       "cpld-ctrl-reg",
-					       &mac_cb->cpld_ctrl_reg);
-		if (ret) {
-			dev_err(mac_cb->dev, "get cpld-ctrl-reg fail!\n");
-			return ret;
+		syscon = syscon_node_to_regmap(cpld_args.np);
+		if (IS_ERR_OR_NULL(syscon)) {
+			dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
+			mac_cb->cpld_ctrl = NULL;
+		} else {
+			mac_cb->cpld_ctrl = syscon;
+			mac_cb->cpld_ctrl_reg = cpld_args.args[0];
 		}
 	}
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH net-next 1/4] net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon property

[Yisen Zhuang]

Because cpld-ctrl-reg property is offset base on cpld-syscon property,
we make it as a cell in the cpld-syscon property.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 26 ++++++++++++-----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 1c8fdd3..210ba89 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -647,6 +647,7 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 {
 	struct device_node *np = mac_cb->dev->of_node;
 	struct regmap *syscon;
+	struct of_phandle_args cpld_args;
 	u32 ret;
 
 	mac_cb->link = false;
@@ -713,22 +714,23 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 			mac_cb->mac_id);
 	}
 
-	syscon = syscon_node_to_regmap(
-			of_parse_phandle(to_of_node(mac_cb->fw_port),
-					 "cpld-syscon", 0));
-	if (IS_ERR_OR_NULL(syscon)) {
-		dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
+	ret = of_parse_phandle_with_fixed_args(to_of_node(mac_cb->fw_port),
+					       "cpld-syscon", 1, 0, &cpld_args);
+	if (ret) {
+		dev_dbg(mac_cb->dev, "mac%d no cpld-syscon found.\n",
+			mac_cb->mac_id);
 		mac_cb->cpld_ctrl = NULL;
 	} else {
-		mac_cb->cpld_ctrl = syscon;
-		ret = fwnode_property_read_u32(mac_cb->fw_port,
-					       "cpld-ctrl-reg",
-					       &mac_cb->cpld_ctrl_reg);
-		if (ret) {
-			dev_err(mac_cb->dev, "get cpld-ctrl-reg fail!\n");
-			return ret;
+		syscon = syscon_node_to_regmap(cpld_args.np);
+		if (IS_ERR_OR_NULL(syscon)) {
+			dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
+			mac_cb->cpld_ctrl = NULL;
+		} else {
+			mac_cb->cpld_ctrl = syscon;
+			mac_cb->cpld_ctrl_reg = cpld_args.args[0];
 		}
 	}
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH net-next 1/4] net: hns: remove cpld-ctrl-reg and add cell in the cpld-syscon property

[Yisen Zhuang]

Because cpld-ctrl-reg property is offset base on cpld-syscon property,
we make it as a cell in the cpld-syscon property.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 26 ++++++++++++-----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 1c8fdd3..210ba89 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -647,6 +647,7 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 {
 	struct device_node *np = mac_cb->dev->of_node;
 	struct regmap *syscon;
+	struct of_phandle_args cpld_args;
 	u32 ret;
 
 	mac_cb->link = false;
@@ -713,22 +714,23 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 			mac_cb->mac_id);
 	}
 
-	syscon = syscon_node_to_regmap(
-			of_parse_phandle(to_of_node(mac_cb->fw_port),
-					 "cpld-syscon", 0));
-	if (IS_ERR_OR_NULL(syscon)) {
-		dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
+	ret = of_parse_phandle_with_fixed_args(to_of_node(mac_cb->fw_port),
+					       "cpld-syscon", 1, 0, &cpld_args);
+	if (ret) {
+		dev_dbg(mac_cb->dev, "mac%d no cpld-syscon found.\n",
+			mac_cb->mac_id);
 		mac_cb->cpld_ctrl = NULL;
 	} else {
-		mac_cb->cpld_ctrl = syscon;
-		ret = fwnode_property_read_u32(mac_cb->fw_port,
-					       "cpld-ctrl-reg",
-					       &mac_cb->cpld_ctrl_reg);
-		if (ret) {
-			dev_err(mac_cb->dev, "get cpld-ctrl-reg fail!\n");
-			return ret;
+		syscon = syscon_node_to_regmap(cpld_args.np);
+		if (IS_ERR_OR_NULL(syscon)) {
+			dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
+			mac_cb->cpld_ctrl = NULL;
+		} else {
+			mac_cb->cpld_ctrl = syscon;
+			mac_cb->cpld_ctrl_reg = cpld_args.args[0];
 		}
 	}
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH net-next 2/4] net: hns: change port-id property to reg property in dsaf port node

[Yisen Zhuang]

Indexes should generally be avoided. So we use reg rather than port-id to
index ports.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 210ba89..611581f 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -834,15 +834,15 @@ int hns_mac_init(struct dsaf_device *dsaf_dev)
 	struct fwnode_handle *child;
 
 	device_for_each_child_node(dsaf_dev->dev, child) {
-		ret = fwnode_property_read_u32(child, "port-id", &port_id);
+		ret = fwnode_property_read_u32(child, "reg", &port_id);
 		if (ret) {
 			dev_err(dsaf_dev->dev,
-				"get port-id fail, ret=%d!\n", ret);
+				"get reg fail, ret=%d!\n", ret);
 			return ret;
 		}
 		if (port_id >= max_port_num) {
 			dev_err(dsaf_dev->dev,
-				"port-id(%u) out of range!\n", port_id);
+				"reg(%u) out of range!\n", port_id);
 			return -EINVAL;
 		}
 		mac_cb = devm_kzalloc(dsaf_dev->dev, sizeof(*mac_cb),
-- 
1.9.1

[PATCH net-next 2/4] net: hns: change port-id property to reg property in dsaf port node

[Yisen Zhuang]

Indexes should generally be avoided. So we use reg rather than port-id to
index ports.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 210ba89..611581f 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -834,15 +834,15 @@ int hns_mac_init(struct dsaf_device *dsaf_dev)
 	struct fwnode_handle *child;
 
 	device_for_each_child_node(dsaf_dev->dev, child) {
-		ret = fwnode_property_read_u32(child, "port-id", &port_id);
+		ret = fwnode_property_read_u32(child, "reg", &port_id);
 		if (ret) {
 			dev_err(dsaf_dev->dev,
-				"get port-id fail, ret=%d!\n", ret);
+				"get reg fail, ret=%d!\n", ret);
 			return ret;
 		}
 		if (port_id >= max_port_num) {
 			dev_err(dsaf_dev->dev,
-				"port-id(%u) out of range!\n", port_id);
+				"reg(%u) out of range!\n", port_id);
 			return -EINVAL;
 		}
 		mac_cb = devm_kzalloc(dsaf_dev->dev, sizeof(*mac_cb),
-- 
1.9.1

[PATCH net-next 2/4] net: hns: change port-id property to reg property in dsaf port node

[Yisen Zhuang]

Indexes should generally be avoided. So we use reg rather than port-id to
index ports.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 210ba89..611581f 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -834,15 +834,15 @@ int hns_mac_init(struct dsaf_device *dsaf_dev)
 	struct fwnode_handle *child;
 
 	device_for_each_child_node(dsaf_dev->dev, child) {
-		ret = fwnode_property_read_u32(child, "port-id", &port_id);
+		ret = fwnode_property_read_u32(child, "reg", &port_id);
 		if (ret) {
 			dev_err(dsaf_dev->dev,
-				"get port-id fail, ret=%d!\n", ret);
+				"get reg fail, ret=%d!\n", ret);
 			return ret;
 		}
 		if (port_id >= max_port_num) {
 			dev_err(dsaf_dev->dev,
-				"port-id(%u) out of range!\n", port_id);
+				"reg(%u) out of range!\n", port_id);
 			return -EINVAL;
 		}
 		mac_cb = devm_kzalloc(dsaf_dev->dev, sizeof(*mac_cb),
-- 
1.9.1

[PATCH net-next 3/4] Documentation: Bindings: Update DT binding for hns dsaf node

[Yisen Zhuang]

This patch changes property port-id to reg in dsaf port node,
removes property cpld-ctrl-reg, and fixes some typos.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 28 ++++++++++------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index 5ccd4f0..d4b7f2e 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -13,10 +13,10 @@ Required properties:
 - interrupts: should contain the DSA Fabric and rcb interrupt.
 - reg: specifies base physical address(es) and size of the device registers.
   The first region is external interface control register base and size(optional,
-  only be used when subctrl-syscon is not exists). It is recommended using
+  only used when subctrl-syscon does not exist). It is recommended using
   subctrl-syscon rather than this address.
-  The second region is SerDes base register and size(optional, only be used when
-  serdes-syscon in port node is not exists. It is recommended using
+  The second region is SerDes base register and size(optional, only used when
+  serdes-syscon in port node does not exist). It is recommended using
   serdes-syscon rather than this address.
   The third region is the PPE register base and size.
   The fourth region is dsa fabric base register and size. It is not required for
@@ -24,8 +24,8 @@ Required properties:
 - reg-names: may be ppe-base and(or) dsaf-base. It is used to find the
   corresponding reg's index.
 
-- phy-handle: phy handle of physicl port, 0 if not any phy device. It is optional
-  attribute. If port node is exists, phy-handle in each port node will be used.
+- phy-handle: phy handle of physical port, 0 if not any phy device. It is optional
+  attribute. If port node exists, phy-handle in each port node will be used.
   see ethernet.txt [1].
 - subctrl-syscon: is syscon handle for external interface control register.
 - reset-field-offset: is offset of reset field. Its value depends on the hardware
@@ -35,14 +35,12 @@ Required properties:
 
 - port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending
   on mode of dsaf). Port node contain some attributes listed below:
-- port-id: is physical port index in one dsaf.
-- phy-handle: phy handle of physicl port. It is not required if there isn't
+- reg: is physical port index in one dsaf.
+- phy-handle: phy handle of physical port. It is not required if there isn't
   phy device. see ethernet.txt [1].
 - serdes-syscon: is syscon handle for SerDes register.
-- cpld-syscon: is syscon handle for cpld register. It is not required if there
-  isn't cpld device.
-- cpld-ctrl-reg: is cpld register offset. It is not required if there isn't
-  cpld-syscon.
+- cpld-syscon: is syscon handle + register offset pair for cpld register. It is
+  not required if there isn't cpld device.
 - port-rst-offset: is offset of reset field for each port in dsaf. Its value
   depends on the hardware user manual.
 - port-mode-offset: is offset of port mode field for each port in dsaf. Its
@@ -72,14 +70,14 @@ dsaf0: dsa at c7000000 {
 	desc-num = <1024>;
 	dma-coherent;
 
-	prot at 0 {
-		port-id = 0;
+	port at 0 {
+		reg = 0;
 		phy-handle = <&phy0>;
 		serdes-syscon = <&serdes>;
 	};
 
-	prot at 1 {
-                port-id = 1;
+	port at 1 {
+                reg = 1;
                 serdes-syscon = <&serdes>;
         };
 };
-- 
1.9.1

[PATCH net-next 3/4] Documentation: Bindings: Update DT binding for hns dsaf node

[Yisen Zhuang]

This patch changes property port-id to reg in dsaf port node,
removes property cpld-ctrl-reg, and fixes some typos.

Signed-off-by: Yisen Zhuang <yisen.zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 28 ++++++++++------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index 5ccd4f0..d4b7f2e 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -13,10 +13,10 @@ Required properties:
 - interrupts: should contain the DSA Fabric and rcb interrupt.
 - reg: specifies base physical address(es) and size of the device registers.
   The first region is external interface control register base and size(optional,
-  only be used when subctrl-syscon is not exists). It is recommended using
+  only used when subctrl-syscon does not exist). It is recommended using
   subctrl-syscon rather than this address.
-  The second region is SerDes base register and size(optional, only be used when
-  serdes-syscon in port node is not exists. It is recommended using
+  The second region is SerDes base register and size(optional, only used when
+  serdes-syscon in port node does not exist). It is recommended using
   serdes-syscon rather than this address.
   The third region is the PPE register base and size.
   The fourth region is dsa fabric base register and size. It is not required for
@@ -24,8 +24,8 @@ Required properties:
 - reg-names: may be ppe-base and(or) dsaf-base. It is used to find the
   corresponding reg's index.
 
-- phy-handle: phy handle of physicl port, 0 if not any phy device. It is optional
-  attribute. If port node is exists, phy-handle in each port node will be used.
+- phy-handle: phy handle of physical port, 0 if not any phy device. It is optional
+  attribute. If port node exists, phy-handle in each port node will be used.
   see ethernet.txt [1].
 - subctrl-syscon: is syscon handle for external interface control register.
 - reset-field-offset: is offset of reset field. Its value depends on the hardware
@@ -35,14 +35,12 @@ Required properties:
 
 - port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending
   on mode of dsaf). Port node contain some attributes listed below:
-- port-id: is physical port index in one dsaf.
-- phy-handle: phy handle of physicl port. It is not required if there isn't
+- reg: is physical port index in one dsaf.
+- phy-handle: phy handle of physical port. It is not required if there isn't
   phy device. see ethernet.txt [1].
 - serdes-syscon: is syscon handle for SerDes register.
-- cpld-syscon: is syscon handle for cpld register. It is not required if there
-  isn't cpld device.
-- cpld-ctrl-reg: is cpld register offset. It is not required if there isn't
-  cpld-syscon.
+- cpld-syscon: is syscon handle + register offset pair for cpld register. It is
+  not required if there isn't cpld device.
 - port-rst-offset: is offset of reset field for each port in dsaf. Its value
   depends on the hardware user manual.
 - port-mode-offset: is offset of port mode field for each port in dsaf. Its
@@ -72,14 +70,14 @@ dsaf0: dsa@c7000000 {
 	desc-num = <1024>;
 	dma-coherent;
 
-	prot@0 {
-		port-id = 0;
+	port@0 {
+		reg = 0;
 		phy-handle = <&phy0>;
 		serdes-syscon = <&serdes>;
 	};
 
-	prot@1 {
-                port-id = 1;
+	port@1 {
+                reg = 1;
                 serdes-syscon = <&serdes>;
         };
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net-next 3/4] Documentation: Bindings: Update DT binding for hns dsaf node

[Yisen Zhuang]

This patch changes property port-id to reg in dsaf port node,
removes property cpld-ctrl-reg, and fixes some typos.

Signed-off-by: Yisen Zhuang <yisen.zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 28 ++++++++++------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index 5ccd4f0..d4b7f2e 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -13,10 +13,10 @@ Required properties:
 - interrupts: should contain the DSA Fabric and rcb interrupt.
 - reg: specifies base physical address(es) and size of the device registers.
   The first region is external interface control register base and size(optional,
-  only be used when subctrl-syscon is not exists). It is recommended using
+  only used when subctrl-syscon does not exist). It is recommended using
   subctrl-syscon rather than this address.
-  The second region is SerDes base register and size(optional, only be used when
-  serdes-syscon in port node is not exists. It is recommended using
+  The second region is SerDes base register and size(optional, only used when
+  serdes-syscon in port node does not exist). It is recommended using
   serdes-syscon rather than this address.
   The third region is the PPE register base and size.
   The fourth region is dsa fabric base register and size. It is not required for
@@ -24,8 +24,8 @@ Required properties:
 - reg-names: may be ppe-base and(or) dsaf-base. It is used to find the
   corresponding reg's index.
 
-- phy-handle: phy handle of physicl port, 0 if not any phy device. It is optional
-  attribute. If port node is exists, phy-handle in each port node will be used.
+- phy-handle: phy handle of physical port, 0 if not any phy device. It is optional
+  attribute. If port node exists, phy-handle in each port node will be used.
   see ethernet.txt [1].
 - subctrl-syscon: is syscon handle for external interface control register.
 - reset-field-offset: is offset of reset field. Its value depends on the hardware
@@ -35,14 +35,12 @@ Required properties:
 
 - port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending
   on mode of dsaf). Port node contain some attributes listed below:
-- port-id: is physical port index in one dsaf.
-- phy-handle: phy handle of physicl port. It is not required if there isn't
+- reg: is physical port index in one dsaf.
+- phy-handle: phy handle of physical port. It is not required if there isn't
   phy device. see ethernet.txt [1].
 - serdes-syscon: is syscon handle for SerDes register.
-- cpld-syscon: is syscon handle for cpld register. It is not required if there
-  isn't cpld device.
-- cpld-ctrl-reg: is cpld register offset. It is not required if there isn't
-  cpld-syscon.
+- cpld-syscon: is syscon handle + register offset pair for cpld register. It is
+  not required if there isn't cpld device.
 - port-rst-offset: is offset of reset field for each port in dsaf. Its value
   depends on the hardware user manual.
 - port-mode-offset: is offset of port mode field for each port in dsaf. Its
@@ -72,14 +70,14 @@ dsaf0: dsa@c7000000 {
 	desc-num = <1024>;
 	dma-coherent;
 
-	prot@0 {
-		port-id = 0;
+	port@0 {
+		reg = 0;
 		phy-handle = <&phy0>;
 		serdes-syscon = <&serdes>;
 	};
 
-	prot@1 {
-                port-id = 1;
+	port@1 {
+                reg = 1;
                 serdes-syscon = <&serdes>;
         };
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net-next 4/4] dts: hisi: update hns dst for changing property port-id to reg

[Yisen Zhuang]

Indexes should generally be avoided. This patch changes property port-id
to reg in dsaf port node.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
index 7d62514..b6a130c 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -24,6 +24,8 @@ soc0: soc at 000000000 {
 	};
 
 	dsaf0: dsa at c7000000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "hisilicon,hns-dsaf-v1";
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;
@@ -124,20 +126,20 @@ soc0: soc at 000000000 {
 		dma-coherent;
 
 		port at 0 {
-			port-id = <0>;
+			reg = <0>;
 			serdes-syscon = <&serdes_ctrl0>;
 		};
 		port at 1 {
-			port-id = <1>;
+			reg = <1>;
 			serdes-syscon = <&serdes_ctrl0>;
 		};
 		port at 4 {
-			port-id = <4>;
+			reg = <4>;
 			phy-handle = <&soc0_phy0>;
 			serdes-syscon = <&serdes_ctrl1>;
 		};
 		port at 5 {
-			port-id = <5>;
+			reg = <5>;
 			phy-handle = <&soc0_phy1>;
 			serdes-syscon = <&serdes_ctrl1>;
 		};
-- 
1.9.1

[PATCH net-next 4/4] dts: hisi: update hns dst for changing property port-id to reg

[Yisen Zhuang]

Indexes should generally be avoided. This patch changes property port-id
to reg in dsaf port node.

Signed-off-by: Yisen Zhuang <yisen.zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
index 7d62514..b6a130c 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -24,6 +24,8 @@ soc0: soc@000000000 {
 	};
 
 	dsaf0: dsa@c7000000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "hisilicon,hns-dsaf-v1";
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;
@@ -124,20 +126,20 @@ soc0: soc@000000000 {
 		dma-coherent;
 
 		port@0 {
-			port-id = <0>;
+			reg = <0>;
 			serdes-syscon = <&serdes_ctrl0>;
 		};
 		port@1 {
-			port-id = <1>;
+			reg = <1>;
 			serdes-syscon = <&serdes_ctrl0>;
 		};
 		port@4 {
-			port-id = <4>;
+			reg = <4>;
 			phy-handle = <&soc0_phy0>;
 			serdes-syscon = <&serdes_ctrl1>;
 		};
 		port@5 {
-			port-id = <5>;
+			reg = <5>;
 			phy-handle = <&soc0_phy1>;
 			serdes-syscon = <&serdes_ctrl1>;
 		};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net-next 4/4] dts: hisi: update hns dst for changing property port-id to reg

[Yisen Zhuang]

Indexes should generally be avoided. This patch changes property port-id
to reg in dsaf port node.

Signed-off-by: Yisen Zhuang <yisen.zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
index 7d62514..b6a130c 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -24,6 +24,8 @@ soc0: soc@000000000 {
 	};
 
 	dsaf0: dsa@c7000000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "hisilicon,hns-dsaf-v1";
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;
@@ -124,20 +126,20 @@ soc0: soc@000000000 {
 		dma-coherent;
 
 		port@0 {
-			port-id = <0>;
+			reg = <0>;
 			serdes-syscon = <&serdes_ctrl0>;
 		};
 		port@1 {
-			port-id = <1>;
+			reg = <1>;
 			serdes-syscon = <&serdes_ctrl0>;
 		};
 		port@4 {
-			port-id = <4>;
+			reg = <4>;
 			phy-handle = <&soc0_phy0>;
 			serdes-syscon = <&serdes_ctrl1>;
 		};
 		port@5 {
-			port-id = <5>;
+			reg = <5>;
 			phy-handle = <&soc0_phy1>;
 			serdes-syscon = <&serdes_ctrl1>;
 		};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[David Miller]

From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Date: Thu, 28 Apr 2016 15:09:00 +0800

> There are some inappropriate properties definition in hns DT. We update the definition
> according to Rob's review comments and fix some typos in binding.
> 
> For more details, please see individual patches.

Series applied, thanks.

BTW, you reposted your 10 part series for adding the dsaf-debug device, but I
already applied the series you posted for that nearly a week ago.

Re: [PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[David Miller]

From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Date: Thu, 28 Apr 2016 15:09:00 +0800

> There are some inappropriate properties definition in hns DT. We update the definition
> according to Rob's review comments and fix some typos in binding.
> 
> For more details, please see individual patches.

Series applied, thanks.

BTW, you reposted your 10 part series for adding the dsaf-debug device, but I
already applied the series you posted for that nearly a week ago.

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Yisen Zhuang]

Hi David,

Thanks for applying the patches.

The series which i reposted is my misoperation. Please ignore them.

Thanks,

Yisen

? 2016/4/30 1:39, David Miller ??:
> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
> Date: Thu, 28 Apr 2016 15:09:00 +0800
> 
>> There are some inappropriate properties definition in hns DT. We update the definition
>> according to Rob's review comments and fix some typos in binding.
>>
>> For more details, please see individual patches.
> 
> Series applied, thanks.
> 
> BTW, you reposted your 10 part series for adding the dsaf-debug device, but I
> already applied the series you posted for that nearly a week ago.
> 
> .
> 

Re: [PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Yisen Zhuang]

Hi David,

Thanks for applying the patches.

The series which i reposted is my misoperation. Please ignore them.

Thanks,

Yisen

在 2016/4/30 1:39, David Miller 写道:
> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
> Date: Thu, 28 Apr 2016 15:09:00 +0800
> 
>> There are some inappropriate properties definition in hns DT. We update the definition
>> according to Rob's review comments and fix some typos in binding.
>>
>> For more details, please see individual patches.
> 
> Series applied, thanks.
> 
> BTW, you reposted your 10 part series for adding the dsaf-debug device, but I
> already applied the series you posted for that nearly a week ago.
> 
> .
> 

Re: [PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Yisen Zhuang]

Hi David,

Thanks for applying the patches.

The series which i reposted is my misoperation. Please ignore them.

Thanks,

Yisen

在 2016/4/30 1:39, David Miller 写道:
> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
> Date: Thu, 28 Apr 2016 15:09:00 +0800
> 
>> There are some inappropriate properties definition in hns DT. We update the definition
>> according to Rob's review comments and fix some typos in binding.
>>
>> For more details, please see individual patches.
> 
> Series applied, thanks.
> 
> BTW, you reposted your 10 part series for adding the dsaf-debug device, but I
> already applied the series you posted for that nearly a week ago.
> 
> .
> 

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Rob Herring]

On Fri, Apr 29, 2016 at 01:39:49PM -0400, David Miller wrote:
> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
> Date: Thu, 28 Apr 2016 15:09:00 +0800
> 
> > There are some inappropriate properties definition in hns DT. We update the definition
> > according to Rob's review comments and fix some typos in binding.
> > 
> > For more details, please see individual patches.
> 
> Series applied, thanks.

It would be nice to review patches addressing my comments before they 
get applied. Can you please give series with DT bindings a few more days 
for review before applying.

Rob

Re: [PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[Rob Herring]

On Fri, Apr 29, 2016 at 01:39:49PM -0400, David Miller wrote:
> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
> Date: Thu, 28 Apr 2016 15:09:00 +0800
> 
> > There are some inappropriate properties definition in hns DT. We update the definition
> > according to Rob's review comments and fix some typos in binding.
> > 
> > For more details, please see individual patches.
> 
> Series applied, thanks.

It would be nice to review patches addressing my comments before they 
get applied. Can you please give series with DT bindings a few more days 
for review before applying.

Rob

[PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[David Miller]

From: Rob Herring <robh@kernel.org>
Date: Tue, 3 May 2016 11:24:44 -0500

> On Fri, Apr 29, 2016 at 01:39:49PM -0400, David Miller wrote:
>> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
>> Date: Thu, 28 Apr 2016 15:09:00 +0800
>> 
>> > There are some inappropriate properties definition in hns DT. We update the definition
>> > according to Rob's review comments and fix some typos in binding.
>> > 
>> > For more details, please see individual patches.
>> 
>> Series applied, thanks.
> 
> It would be nice to review patches addressing my comments before they 
> get applied. Can you please give series with DT bindings a few more days 
> for review before applying.

I can't go more than a day or so days, I refuse to let patches rot in
my backlog for more than that.  I get sometimes a hundred new patch
submissions a day and what you are asking me to do would make maintainence
untenable for everyone, sorry.

Just be quicker on the review, then there are no problems.

Re: [PATCH net-next 0/4] net: hns: update DT properties according to Rob's comments

[David Miller]

From: Rob Herring <robh@kernel.org>
Date: Tue, 3 May 2016 11:24:44 -0500

> On Fri, Apr 29, 2016 at 01:39:49PM -0400, David Miller wrote:
>> From: Yisen Zhuang <Yisen.Zhuang@huawei.com>
>> Date: Thu, 28 Apr 2016 15:09:00 +0800
>> 
>> > There are some inappropriate properties definition in hns DT. We update the definition
>> > according to Rob's review comments and fix some typos in binding.
>> > 
>> > For more details, please see individual patches.
>> 
>> Series applied, thanks.
> 
> It would be nice to review patches addressing my comments before they 
> get applied. Can you please give series with DT bindings a few more days 
> for review before applying.

I can't go more than a day or so days, I refuse to let patches rot in
my backlog for more than that.  I get sometimes a hundred new patch
submissions a day and what you are asking me to do would make maintainence
untenable for everyone, sorry.

Just be quicker on the review, then there are no problems.