All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Hellstrom <thellstrom@vmware.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org, David Herrmann <dh.herrmann@gmail.com>
Subject: Re: [PATCH] drm/core: Do not preserve framebuffer on rmfb, v3.
Date: Tue, 3 May 2016 14:01:49 +0200	[thread overview]
Message-ID: <5728932D.90003@vmware.com> (raw)
In-Reply-To: <1459423563-27558-1-git-send-email-maarten.lankhorst@linux.intel.com>

Hi,

Sorry for the late response, been very busy with other stuff lately.

I've tested this version against drm-fixes and it indeed fixes the
problem, as far as I can tell.

Tested-by: Thomas Hellstrom <thellstrom@vmware.com>


On 03/31/2016 01:26 PM, Maarten Lankhorst wrote:
> It turns out that preserving framebuffers after the rmfb call breaks
> vmwgfx userspace. This was originally introduced because it was thought
> nobody relied on the behavior, but unfortunately it seems there are
> exceptions.
>
> drm_framebuffer_remove may fail with -EINTR now, so a straight revert
> is impossible. There is no way to remove the framebuffer from the lists
> and active planes without introducing a race because of the different
> locking requirements. Instead call drm_framebuffer_remove from a
> workqueue, which is unaffected by signals.
>
> Changes since v1:
> - Add comment.
> Changes since v2:
> - Add fastpath for refcount = 1. (danvet)
>
> Cc: stable@vger.kernel.org #v4.4+
> Fixes: 13803132818c ("drm/core: Preserve the framebuffer after removing it.")
> Testcase: kms_flip.flip-vs-rmfb-interruptible
> References: https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.freedesktop.org_archives_dri-2Ddevel_2016-2DMarch_102876.html&d=BQIBAg&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=vpukPkBtpoNQp2IUKuFviOmPNYWVKmen3Jeeu55zmEA&m=_2qOX1NGnSnJOTgqvu1Ud574i5T3fLDlX91oUS3WXXI&s=9D34PFYdb1PT2vzX_M_7lNVoSebfM9-KsAqe5AXAQbQ&e= 
> Cc: Thomas Hellstrom <thellstrom@vmware.com>
> Cc: David Herrmann <dh.herrmann@gmail.com>
> ---
>  drivers/gpu/drm/drm_crtc.c | 29 ++++++++++++++++++++++++++++-
>  1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 55ffde5a3a4a..743bece1f579 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -3434,6 +3434,18 @@ int drm_mode_addfb2(struct drm_device *dev,
>  	return 0;
>  }
>  
> +struct drm_mode_rmfb_work {
> +	struct work_struct work;
> +	struct drm_framebuffer *fb;
> +};
> +
> +static void drm_mode_rmfb_work_fn(struct work_struct *w)
> +{
> +	struct drm_mode_rmfb_work *arg = container_of(w, typeof(*arg), work);
> +
> +	drm_framebuffer_remove(arg->fb);
> +}
> +
>  /**
>   * drm_mode_rmfb - remove an FB from the configuration
>   * @dev: drm device for the ioctl
> @@ -3474,7 +3486,22 @@ int drm_mode_rmfb(struct drm_device *dev,
>  	mutex_unlock(&dev->mode_config.fb_lock);
>  	mutex_unlock(&file_priv->fbs_lock);
>  
> -	drm_framebuffer_unreference(fb);
> +	/*
> +	 * drm_framebuffer_remove may fail with -EINTR on pending signals,
> +	 * so run this in a separate stack as there's no way to correctly
> +	 * handle this after the fb is already removed from the lookup table.
> +	 */
> +	if (atomic_read(&fb->refcount.refcount) > 1) {
> +		struct drm_mode_rmfb_work arg;
> +
> +		INIT_WORK_ONSTACK(&arg.work, drm_mode_rmfb_work_fn);
> +		arg.fb = fb;
> +
> +		schedule_work(&arg.work);
> +		flush_work(&arg.work);
> +		destroy_work_on_stack(&arg.work);
> +	} else
> +		drm_framebuffer_unreference(fb);
>  
>  	return 0;
>  

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2016-05-03 12:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-22  9:58 [PATCH] drm/core: Do not preserve framebuffer on rmfb, v2 Maarten Lankhorst
2016-03-22 11:35 ` ✗ Fi.CI.BAT: failure for " Patchwork
2016-03-31 11:26 ` [PATCH] drm/core: Do not preserve framebuffer on rmfb, v3 Maarten Lankhorst
2016-04-11  7:30   ` Maarten Lankhorst
2016-04-12 10:42   ` Daniel Vetter
2016-04-12 10:42     ` Daniel Vetter
2016-05-02  9:07     ` [REBASED PATCH] " Maarten Lankhorst
2016-05-02  9:07       ` Maarten Lankhorst
2016-05-03 12:01   ` Thomas Hellstrom [this message]
2016-05-04 12:10     ` [PATCH i-g-t] tests/kms: Add test for testing rmfb framebuffer removal handling Maarten Lankhorst
2016-05-05  9:11       ` [Intel-gfx] " Tvrtko Ursulin
2016-05-05 11:50         ` Daniel Vetter
2016-05-04 12:38     ` [PATCH] drm/core: Do not preserve framebuffer on rmfb, v4 Maarten Lankhorst
2016-05-05  9:07       ` Tvrtko Ursulin
2016-05-05 11:51         ` [Intel-gfx] " Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5728932D.90003@vmware.com \
    --to=thellstrom@vmware.com \
    --cc=dh.herrmann@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.