From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Richard Purdie <rpurdie@rpsys.net>,
Lee Jones <lee.jones@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org, linux-leds@vger.kernel.org,
linux-pm@vger.kernel.org, rtc-linux@googlegroups.com,
r.baldyga@hackerion.com,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
Date: Fri, 06 May 2016 10:04:32 +0200 [thread overview]
Message-ID: <572C5010.1090102@samsung.com> (raw)
In-Reply-To: <1462519636-3250-1-git-send-email-k.kozlowski@samsung.com>
Hi Krzysztof,
On 05/06/2016 09:27 AM, Krzysztof Kozlowski wrote:
> From: Robert Baldyga <r.baldyga@samsung.com>
>
> This patch modifies max8997 driver and each associated function driver,
> to use regmap instead of operating directly on i2c bus. It will allow to
> simplify IRQ handling using regmap-irq.
>
> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> [For extcon part]
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> [For leds part]
> Acked-by: Bryan Wu <cooloney@gmail.com>
>
Since I've replaced Bryan on the position of LED subsystem maintainer
feel free to use my ack:
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
--
Best regards,
Jacek Anaszewski
WARNING: multiple messages have this Message-ID (diff)
From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Richard Purdie <rpurdie@rpsys.net>,
Lee Jones <lee.jones@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org, linux-leds@vger.kernel.org,
linux-pm@vger.kernel.org, rtc-linux@googlegroups.com,
r.baldyga@hackerion.com,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [rtc-linux] Re: [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
Date: Fri, 06 May 2016 10:04:32 +0200 [thread overview]
Message-ID: <572C5010.1090102@samsung.com> (raw)
In-Reply-To: <1462519636-3250-1-git-send-email-k.kozlowski@samsung.com>
Hi Krzysztof,
On 05/06/2016 09:27 AM, Krzysztof Kozlowski wrote:
> From: Robert Baldyga <r.baldyga@samsung.com>
>
> This patch modifies max8997 driver and each associated function driver,
> to use regmap instead of operating directly on i2c bus. It will allow to
> simplify IRQ handling using regmap-irq.
>
> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> [For extcon part]
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> [For leds part]
> Acked-by: Bryan Wu <cooloney@gmail.com>
>
Since I've replaced Bryan on the position of LED subsystem maintainer
feel free to use my ack:
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
--
Best regards,
Jacek Anaszewski
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: j.anaszewski@samsung.com (Jacek Anaszewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 2/9] mfd: max8997: Use regmap to access registers
Date: Fri, 06 May 2016 10:04:32 +0200 [thread overview]
Message-ID: <572C5010.1090102@samsung.com> (raw)
In-Reply-To: <1462519636-3250-1-git-send-email-k.kozlowski@samsung.com>
Hi Krzysztof,
On 05/06/2016 09:27 AM, Krzysztof Kozlowski wrote:
> From: Robert Baldyga <r.baldyga@samsung.com>
>
> This patch modifies max8997 driver and each associated function driver,
> to use regmap instead of operating directly on i2c bus. It will allow to
> simplify IRQ handling using regmap-irq.
>
> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> [For extcon part]
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> [For leds part]
> Acked-by: Bryan Wu <cooloney@gmail.com>
>
Since I've replaced Bryan on the position of LED subsystem maintainer
feel free to use my ack:
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
--
Best regards,
Jacek Anaszewski
next prev parent reply other threads:[~2016-05-06 8:04 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 7:21 [PATCH v6 0/9] mfd: max8997: Add regmap support Krzysztof Kozlowski
2016-05-06 7:21 ` Krzysztof Kozlowski
2016-05-06 7:21 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:21 ` [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference Krzysztof Kozlowski
2016-05-06 7:21 ` Krzysztof Kozlowski
2016-05-06 7:21 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:24 ` Krzysztof Kozlowski
2016-05-06 7:24 ` Krzysztof Kozlowski
2016-05-06 7:24 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:27 ` [PATCH v6 2/9] mfd: max8997: Use regmap to access registers Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:27 ` [PATCH v6 3/9] mfd: max8997: handle IRQs using regmap Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:27 ` [PATCH v6 4/9] mfd: max8997: Change irq names to upper case Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:27 ` [PATCH v6 5/9] extcon: max8997: Fix handling error code of regmap_irq_get_virq() Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-10 1:23 ` Chanwoo Choi
2016-05-10 1:23 ` Chanwoo Choi
2016-05-10 1:23 ` Chanwoo Choi
2016-05-10 1:23 ` [rtc-linux] " Chanwoo Choi
2016-05-06 7:27 ` [PATCH v6 6/9] rtc: max8997: Check for ERRNO " Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-07 6:48 ` Alexandre Belloni
2016-05-07 6:48 ` Alexandre Belloni
2016-05-07 6:48 ` [rtc-linux] " Alexandre Belloni
2016-05-06 7:27 ` [PATCH v6 7/9] extcon: max8997: Fix inconsistent indenting Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
[not found] ` <1462519636-3250-6-git-send-email-k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-05-10 1:24 ` Chanwoo Choi
2016-05-10 1:24 ` Chanwoo Choi
2016-05-10 1:24 ` Chanwoo Choi
2016-05-10 1:24 ` [rtc-linux] " Chanwoo Choi
2016-05-06 7:27 ` [PATCH v6 8/9] ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 7:27 ` [PATCH v6 9/9] ARM: dts: exynos: Add interrupt line to MAX8997 PMIC " Krzysztof Kozlowski
2016-05-06 7:27 ` Krzysztof Kozlowski
2016-05-06 7:27 ` [rtc-linux] " Krzysztof Kozlowski
2016-05-06 8:04 ` Jacek Anaszewski [this message]
2016-05-06 8:04 ` [PATCH v6 2/9] mfd: max8997: Use regmap to access registers Jacek Anaszewski
2016-05-06 8:04 ` [rtc-linux] " Jacek Anaszewski
2016-05-09 16:32 ` [PATCH v6 1/9] input: max8997-haptic: Fix NULL pointer dereference Dmitry Torokhov
2016-05-09 16:32 ` Dmitry Torokhov
2016-05-09 16:32 ` Dmitry Torokhov
2016-05-09 16:32 ` [rtc-linux] " Dmitry Torokhov
2016-05-09 7:35 ` [PATCH v6 0/9] mfd: max8997: Add regmap support Lee Jones
2016-05-09 7:35 ` Lee Jones
2016-05-09 7:35 ` Lee Jones
2016-05-09 7:35 ` [rtc-linux] " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=572C5010.1090102@samsung.com \
--to=j.anaszewski@samsung.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=r.baldyga@hackerion.com \
--cc=rpurdie@rpsys.net \
--cc=rtc-linux@googlegroups.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.