From: Wadim Egorov <w.egorov@phytec.de>
To: Lee Jones <lee.jones@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
rtc-linux@googlegroups.com, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, mturquette@baylibre.com,
sboyd@codeaurora.org, lgirdwood@gmail.com, broonie@kernel.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
dianders@chromium.org, zyw@rock-chips.com
Subject: Re: [PATCH v5 3/6] regulator: rk808: Add regulator driver for RK818
Date: Tue, 10 May 2016 16:15:23 +0200 [thread overview]
Message-ID: <5731ECFB.2000207@phytec.de> (raw)
In-Reply-To: <20160510140320.GO19473@dell>
On 10.05.2016 16:03, Lee Jones wrote:
> On Tue, 10 May 2016, Wadim Egorov wrote:
>
>> Add support for the rk818 regulator. The regulator module consists
>> of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
>> power OTG and HDMI5V.
>>
>> The output voltages are configurable and are meant to supply power
>> to the main processor and other components.
>>
>> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
>> ---
>> drivers/regulator/Kconfig | 4 +-
>> drivers/regulator/rk808-regulator.c | 143 ++++++++++++++++++++++++++++++++++--
>> 2 files changed, 138 insertions(+), 9 deletions(-)
> Needs an Ack before I can take the set.
>
Mark acked this patch in v3.
After small changes I removed the ack again. I don't know if it is ok to
keep an Acked-by with small changes in the patch.
WARNING: multiple messages have this Message-ID (diff)
From: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v5 3/6] regulator: rk808: Add regulator driver for RK818
Date: Tue, 10 May 2016 16:15:23 +0200 [thread overview]
Message-ID: <5731ECFB.2000207@phytec.de> (raw)
In-Reply-To: <20160510140320.GO19473@dell>
On 10.05.2016 16:03, Lee Jones wrote:
> On Tue, 10 May 2016, Wadim Egorov wrote:
>
>> Add support for the rk818 regulator. The regulator module consists
>> of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
>> power OTG and HDMI5V.
>>
>> The output voltages are configurable and are meant to supply power
>> to the main processor and other components.
>>
>> Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
>> ---
>> drivers/regulator/Kconfig | 4 +-
>> drivers/regulator/rk808-regulator.c | 143 ++++++++++++++++++++++++++++++++++--
>> 2 files changed, 138 insertions(+), 9 deletions(-)
> Needs an Ack before I can take the set.
>
Mark acked this patch in v3.
After small changes I removed the ack again. I don't know if it is ok to
keep an Acked-by with small changes in the patch.
WARNING: multiple messages have this Message-ID (diff)
From: Wadim Egorov <w.egorov@phytec.de>
To: Lee Jones <lee.jones@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
rtc-linux@googlegroups.com, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, mturquette@baylibre.com,
sboyd@codeaurora.org, lgirdwood@gmail.com, broonie@kernel.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
dianders@chromium.org, zyw@rock-chips.com
Subject: [rtc-linux] Re: [PATCH v5 3/6] regulator: rk808: Add regulator driver for RK818
Date: Tue, 10 May 2016 16:15:23 +0200 [thread overview]
Message-ID: <5731ECFB.2000207@phytec.de> (raw)
In-Reply-To: <20160510140320.GO19473@dell>
On 10.05.2016 16:03, Lee Jones wrote:
> On Tue, 10 May 2016, Wadim Egorov wrote:
>
>> Add support for the rk818 regulator. The regulator module consists
>> of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
>> power OTG and HDMI5V.
>>
>> The output voltages are configurable and are meant to supply power
>> to the main processor and other components.
>>
>> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
>> ---
>> drivers/regulator/Kconfig | 4 +-
>> drivers/regulator/rk808-regulator.c | 143 ++++++++++++++++++++++++++++++++++--
>> 2 files changed, 138 insertions(+), 9 deletions(-)
> Needs an Ack before I can take the set.
>
Mark acked this patch in v3.
After small changes I removed the ack again. I don't know if it is ok to
keep an Acked-by with small changes in the patch.
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2016-05-10 14:15 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-10 13:18 [PATCH v5 0/6] Add support for rk818 Wadim Egorov
2016-05-10 13:18 ` [rtc-linux] " Wadim Egorov
2016-05-10 13:18 ` Wadim Egorov
2016-05-10 13:18 ` [PATCH v5 1/6] regulator: rk808: Migrate to regulator core's simplified DT parsing code Wadim Egorov
2016-05-10 13:18 ` [rtc-linux] " Wadim Egorov
2016-05-10 13:18 ` [PATCH v5 2/6] mfd: RK808: Add RK818 support Wadim Egorov
2016-05-10 13:18 ` [rtc-linux] " Wadim Egorov
2016-05-10 13:18 ` Wadim Egorov
2016-05-10 13:18 ` [PATCH v5 3/6] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
2016-05-10 13:18 ` [rtc-linux] " Wadim Egorov
2016-05-10 13:18 ` Wadim Egorov
2016-05-10 14:03 ` Lee Jones
2016-05-10 14:03 ` [rtc-linux] " Lee Jones
2016-05-10 14:03 ` Lee Jones
2016-05-10 14:15 ` Wadim Egorov [this message]
2016-05-10 14:15 ` [rtc-linux] " Wadim Egorov
2016-05-10 14:15 ` Wadim Egorov
2016-05-13 11:20 ` Mark Brown
2016-05-13 11:20 ` [rtc-linux] " Mark Brown
2016-05-10 13:18 ` [PATCH v5 4/6] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
2016-05-10 13:18 ` [rtc-linux] " Wadim Egorov
2016-05-10 13:18 ` [PATCH v5 5/6] clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808 Wadim Egorov
2016-05-10 13:18 ` [rtc-linux] " Wadim Egorov
2016-05-10 13:18 ` Wadim Egorov
2016-05-10 13:19 ` [PATCH v5 6/6] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
2016-05-10 13:19 ` [rtc-linux] " Wadim Egorov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5731ECFB.2000207@phytec.de \
--to=w.egorov@phytec.de \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=sboyd@codeaurora.org \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.