From: Paolo Bonzini <pbonzini@redhat.com>
To: "Sergey Fedorov" <serge.fdrv@gmail.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
mttcg@greensocs.com, fred.konrad@greensocs.com,
a.rigo@virtualopensystems.com, cota@braap.org
Cc: qemu-devel@nongnu.org, mark.burton@greensocs.com,
jan.kiszka@siemens.com, rth@twiddle.net,
peter.maydell@linaro.org, claudio.fontana@huawei.com,
Peter Crosthwaite <crosthwaite.peter@gmail.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>
Subject: Re: [Qemu-devel] [RFC v2 05/11] tcg: protect TBContext with tb_lock.
Date: Wed, 11 May 2016 14:52:52 +0200 [thread overview]
Message-ID: <57332B24.9090304@redhat.com> (raw)
In-Reply-To: <5733295B.8090401@gmail.com>
Just a couple answers/remarks.
On 11/05/2016 14:45, Sergey Fedorov wrote:
>> diff --git a/exec.c b/exec.c
>> index 17f390e..c46c123 100644
>> --- a/exec.c
>> +++ b/exec.c
>> @@ -2111,6 +2111,9 @@ static void check_watchpoint(int offset, int len, MemTxAttrs attrs, int flags)
>> continue;
>> }
>> cpu->watchpoint_hit = wp;
>> +
>> + /* Unlocked by cpu_loop_exit or cpu_resume_from_signal. */
>
> In fact, neither cpu_resume_from_signal() nor cpu_loop_exit() unlocks
> the lock by itself, it gets unlocked after sigsetjmp() returns via
> siglongjmp() back to cpu_exec(). So maybe it would be more clear to say
> something like "'tb_lock' gets unlocked after siglongjmp()"?
Yes, or "cpu_exec() unlocks tb_lock after cpu_loop_exit or
cpu_resume_from_signal". Something like that, anyway.
>> void tb_flush(CPUState *cpu)
>> {
>> #if defined(DEBUG_FLUSH)
>> @@ -1350,6 +1352,7 @@ void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
>> /* we remove all the TBs in the range [start, end[ */
>> /* XXX: see if in some cases it could be faster to invalidate all
>> the code */
>> + tb_lock();
>
> Don't we need also protect a call to page_find() above? page_find()
> calls page_find_alloc() which is noted to be called with 'tb_lock' held.
Only if alloc=1; page_find calls it with alloc=0.
> However, it might depend on the way we treat 'mmap_lock' in system mode
> emulation.
It's just not there; generally speaking it's replaced with tb_lock.
>> @ -1627,6 +1636,7 @@ void cpu_io_recompile(CPUState *cpu, uintptr_t retaddr)
>> target_ulong pc, cs_base;
>> uint64_t flags;
>>
>> + tb_lock();
>
> We don't have to take 'tb_lock' for nether tb_find_pc() nor
> cpu_restore_state_from_tb() because the lock does not protect from
> tb_flush() anyway. I think the lock should be taken just before the
> first call to tb_phys_invalidate() in this function.
Indeed, this dates back to when cpu_restore_state_from_tb did recompilation.
In general, I don't have a big problem with slightly bigger critical
sections than necessary, if they aren't in a hot path or they avoid
repeated lock-unlock.
Thanks,
Paolo
next prev parent reply other threads:[~2016-05-11 12:53 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 15:32 [Qemu-devel] [RFC v2 00/11] Base enabling patches for MTTCG Alex Bennée
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 01/11] tcg: move tb_invalidated_flag to CPUState Alex Bennée
2016-04-05 15:44 ` Paolo Bonzini
2016-04-06 10:11 ` Sergey Fedorov
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 02/11] cpus: make all_vcpus_paused() return bool Alex Bennée
2016-04-11 12:48 ` Sergey Fedorov
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 03/11] docs: new design document multi-thread-tcg.txt (DRAFTING) Alex Bennée
2016-04-11 20:00 ` Sergey Fedorov
2016-05-25 15:48 ` Sergey Fedorov
2016-05-25 16:01 ` Alex Bennée
2016-05-25 18:03 ` Paolo Bonzini
2016-05-25 18:13 ` Sergey Fedorov
2016-05-06 11:25 ` Sergey Fedorov
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 04/11] tcg: comment on which functions have to be called with tb_lock held Alex Bennée
2016-05-05 14:19 ` Sergey Fedorov
2016-05-05 15:03 ` Alex Bennée
2016-05-05 15:25 ` Sergey Fedorov
2016-05-05 15:42 ` Sergey Fedorov
2016-05-06 18:22 ` Sergey Fedorov
2016-05-11 12:58 ` Paolo Bonzini
2016-05-11 13:36 ` Sergey Fedorov
2016-05-11 13:46 ` Paolo Bonzini
2016-05-12 19:32 ` Sergey Fedorov
2016-05-13 9:25 ` Paolo Bonzini
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 05/11] tcg: protect TBContext with tb_lock Alex Bennée
2016-05-11 12:45 ` Sergey Fedorov
2016-05-11 12:52 ` Paolo Bonzini [this message]
2016-05-11 13:42 ` Sergey Fedorov
2016-06-01 10:30 ` Alex Bennée
2016-06-02 14:37 ` Sergey Fedorov
2016-04-05 15:32 ` [RFC v2 06/11] target-arm/psci.c: wake up sleeping CPUs Alex Bennée
2016-04-05 15:32 ` [Qemu-devel] " Alex Bennée
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 07/11] tcg: cpus rm tcg_exec_all() Alex Bennée
2016-05-26 11:03 ` Sergey Fedorov
2016-05-26 13:10 ` Alex Bennée
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 08/11] tcg: add options for enabling MTTCG Alex Bennée
2016-04-11 20:50 ` Sergey Fedorov
2016-04-12 11:48 ` Alex Bennée
2016-04-12 11:59 ` Peter Maydell
2016-04-12 12:42 ` Sergey Fedorov
2016-04-12 12:50 ` KONRAD Frederic
2016-04-12 13:00 ` Sergey Fedorov
2016-04-12 13:03 ` Pavel Dovgalyuk
2016-04-12 13:19 ` Sergey Fedorov
2016-04-12 14:23 ` Alex Bennée
2016-05-09 10:47 ` Paolo Bonzini
2016-04-12 12:48 ` Sergey Fedorov
2016-05-09 10:45 ` Paolo Bonzini
2016-05-09 11:50 ` Alex Bennée
2016-04-12 13:23 ` Sergey Fedorov
2016-04-12 14:28 ` Alex Bennée
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 09/11] tcg: add kick timer for single-threaded vCPU emulation Alex Bennée
2016-04-11 21:39 ` Sergey Fedorov
2016-06-02 16:00 ` Alex Bennée
2016-06-02 16:05 ` Sergey Fedorov
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 10/11] tcg: drop global lock during TCG code execution Alex Bennée
2016-05-24 21:28 ` Sergey Fedorov
2016-05-25 10:33 ` Paolo Bonzini
2016-05-25 11:07 ` Alex Bennée
2016-05-25 12:46 ` Paolo Bonzini
2016-04-05 15:32 ` [Qemu-devel] [RFC v2 11/11] tcg: enable thread-per-vCPU Alex Bennée
2016-05-27 13:57 ` Sergey Fedorov
2016-05-27 14:55 ` Paolo Bonzini
2016-05-27 15:07 ` Sergey Fedorov
2016-05-27 15:25 ` Paolo Bonzini
2016-05-27 18:54 ` Sergey Fedorov
2016-06-02 16:36 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57332B24.9090304@redhat.com \
--to=pbonzini@redhat.com \
--cc=a.rigo@virtualopensystems.com \
--cc=alex.bennee@linaro.org \
--cc=claudio.fontana@huawei.com \
--cc=cota@braap.org \
--cc=crosthwaite.peter@gmail.com \
--cc=ehabkost@redhat.com \
--cc=fred.konrad@greensocs.com \
--cc=jan.kiszka@siemens.com \
--cc=mark.burton@greensocs.com \
--cc=mst@redhat.com \
--cc=mttcg@greensocs.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.