From: Sinan Kaya <okaya@codeaurora.org>
To: Eric Auger <eric.auger@linaro.org>,
kvm@vger.kernel.org, timur@codeaurora.org, cov@codeaurora.org,
jcm@redhat.com
Cc: linux-acpi@vger.kernel.org, agross@codeaurora.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Baptiste Reynal <b.reynal@virtualopensystems.com>,
Alex Williamson <alex.williamson@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V5 2/6] vfio: platform: move reset call to a common function
Date: Mon, 23 May 2016 22:14:59 -0400 [thread overview]
Message-ID: <5743B923.4090307@codeaurora.org> (raw)
In-Reply-To: <5742FF59.6090108@linaro.org>
On 5/23/2016 9:02 AM, Eric Auger wrote:
> Hi Sinan,
> On 05/16/2016 04:13 AM, Sinan Kaya wrote:
>> The reset call sequence seems to replicate itself multiple times
>> across the file. Grouping them together for maintenance reasons.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> ---
>> drivers/vfio/platform/vfio_platform_common.c | 31 ++++++++++++++--------------
>> 1 file changed, 15 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
>> index 08fd7c2..cb91dd3 100644
>> --- a/drivers/vfio/platform/vfio_platform_common.c
>> +++ b/drivers/vfio/platform/vfio_platform_common.c
>> @@ -134,6 +134,18 @@ static void vfio_platform_regions_cleanup(struct vfio_platform_device *vdev)
>> kfree(vdev->regions);
>> }
>>
>> +static int vfio_platform_call_reset(struct vfio_platform_device *vdev)
>> +{
>> + if (vdev->of_reset) {
>> + dev_info(vdev->device, "reset\n");
>> + vdev->of_reset(vdev);
>> + return 0;
> you should return vdev->of_reset(vdev) to keep the existing
> VFIO_DEVICE_RESET ioctl behavior
will do.
>
> Once fixed, Reviewed-by: Eric Auger <eric.auger@linaro.org>
>
thanks.
> Besides, but this goes beyond the scope of your series, maybe we should
> reconsider in the future what happens in case the reset fails on
> open/release.
>
I like giving an error immediately to be honest on open.
> Best Regards
>
> Eric
>> + }
>> +
>> + dev_warn(vdev->device, "no reset function found!\n");
>> + return -EINVAL;
>> +}
>> +
>> static void vfio_platform_release(void *device_data)
>> {
>> struct vfio_platform_device *vdev = device_data;
>> @@ -141,12 +153,7 @@ static void vfio_platform_release(void *device_data)
>> mutex_lock(&driver_lock);
>>
>> if (!(--vdev->refcnt)) {
>> - if (vdev->of_reset) {
>> - dev_info(vdev->device, "reset\n");
>> - vdev->of_reset(vdev);
>> - } else {
>> - dev_warn(vdev->device, "no reset function found!\n");
>> - }
>> + vfio_platform_call_reset(vdev);
>> vfio_platform_regions_cleanup(vdev);
>> vfio_platform_irq_cleanup(vdev);
>> }
>> @@ -175,12 +182,7 @@ static int vfio_platform_open(void *device_data)
>> if (ret)
>> goto err_irq;
>>
>> - if (vdev->of_reset) {
>> - dev_info(vdev->device, "reset\n");
>> - vdev->of_reset(vdev);
>> - } else {
>> - dev_warn(vdev->device, "no reset function found!\n");
>> - }
>> + vfio_platform_call_reset(vdev);
>> }
>>
>> vdev->refcnt++;
>> @@ -312,10 +314,7 @@ static long vfio_platform_ioctl(void *device_data,
>> return ret;
>>
>> } else if (cmd == VFIO_DEVICE_RESET) {
>> - if (vdev->of_reset)
>> - return vdev->of_reset(vdev);
>> - else
>> - return -EINVAL;
>> + return vfio_platform_call_reset(vdev);
>> }
>>
>> return -ENOTTY;
>>
>
--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 2/6] vfio: platform: move reset call to a common function
Date: Mon, 23 May 2016 22:14:59 -0400 [thread overview]
Message-ID: <5743B923.4090307@codeaurora.org> (raw)
In-Reply-To: <5742FF59.6090108@linaro.org>
On 5/23/2016 9:02 AM, Eric Auger wrote:
> Hi Sinan,
> On 05/16/2016 04:13 AM, Sinan Kaya wrote:
>> The reset call sequence seems to replicate itself multiple times
>> across the file. Grouping them together for maintenance reasons.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> ---
>> drivers/vfio/platform/vfio_platform_common.c | 31 ++++++++++++++--------------
>> 1 file changed, 15 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
>> index 08fd7c2..cb91dd3 100644
>> --- a/drivers/vfio/platform/vfio_platform_common.c
>> +++ b/drivers/vfio/platform/vfio_platform_common.c
>> @@ -134,6 +134,18 @@ static void vfio_platform_regions_cleanup(struct vfio_platform_device *vdev)
>> kfree(vdev->regions);
>> }
>>
>> +static int vfio_platform_call_reset(struct vfio_platform_device *vdev)
>> +{
>> + if (vdev->of_reset) {
>> + dev_info(vdev->device, "reset\n");
>> + vdev->of_reset(vdev);
>> + return 0;
> you should return vdev->of_reset(vdev) to keep the existing
> VFIO_DEVICE_RESET ioctl behavior
will do.
>
> Once fixed, Reviewed-by: Eric Auger <eric.auger@linaro.org>
>
thanks.
> Besides, but this goes beyond the scope of your series, maybe we should
> reconsider in the future what happens in case the reset fails on
> open/release.
>
I like giving an error immediately to be honest on open.
> Best Regards
>
> Eric
>> + }
>> +
>> + dev_warn(vdev->device, "no reset function found!\n");
>> + return -EINVAL;
>> +}
>> +
>> static void vfio_platform_release(void *device_data)
>> {
>> struct vfio_platform_device *vdev = device_data;
>> @@ -141,12 +153,7 @@ static void vfio_platform_release(void *device_data)
>> mutex_lock(&driver_lock);
>>
>> if (!(--vdev->refcnt)) {
>> - if (vdev->of_reset) {
>> - dev_info(vdev->device, "reset\n");
>> - vdev->of_reset(vdev);
>> - } else {
>> - dev_warn(vdev->device, "no reset function found!\n");
>> - }
>> + vfio_platform_call_reset(vdev);
>> vfio_platform_regions_cleanup(vdev);
>> vfio_platform_irq_cleanup(vdev);
>> }
>> @@ -175,12 +182,7 @@ static int vfio_platform_open(void *device_data)
>> if (ret)
>> goto err_irq;
>>
>> - if (vdev->of_reset) {
>> - dev_info(vdev->device, "reset\n");
>> - vdev->of_reset(vdev);
>> - } else {
>> - dev_warn(vdev->device, "no reset function found!\n");
>> - }
>> + vfio_platform_call_reset(vdev);
>> }
>>
>> vdev->refcnt++;
>> @@ -312,10 +314,7 @@ static long vfio_platform_ioctl(void *device_data,
>> return ret;
>>
>> } else if (cmd == VFIO_DEVICE_RESET) {
>> - if (vdev->of_reset)
>> - return vdev->of_reset(vdev);
>> - else
>> - return -EINVAL;
>> + return vfio_platform_call_reset(vdev);
>> }
>>
>> return -ENOTTY;
>>
>
--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-05-24 2:14 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-16 2:13 [PATCH V5 0/6] vfio, platform: add ACPI support Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-16 2:13 ` [PATCH V5 1/6] vfio: platform: rename reset function Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-23 12:52 ` Eric Auger
2016-05-23 12:52 ` Eric Auger
2016-05-16 2:13 ` [PATCH V5 2/6] vfio: platform: move reset call to a common function Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-23 13:02 ` Eric Auger
2016-05-23 13:02 ` Eric Auger
2016-05-24 2:14 ` Sinan Kaya [this message]
2016-05-24 2:14 ` Sinan Kaya
2016-05-16 2:13 ` [PATCH V5 3/6] vfio: platform: determine reset capability Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-23 13:16 ` Eric Auger
2016-05-23 13:16 ` Eric Auger
2016-05-16 2:13 ` [PATCH V5 4/6] vfio: platform: add support for ACPI probe Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-23 13:18 ` Eric Auger
2016-05-23 13:18 ` Eric Auger
2016-05-24 2:18 ` Sinan Kaya
2016-05-24 2:18 ` Sinan Kaya
2016-06-07 16:33 ` Auger Eric
2016-06-07 16:33 ` Auger Eric
2016-06-07 16:33 ` Auger Eric
2016-05-16 2:13 ` [PATCH V5 5/6] vfio: platform: call _RST method when using ACPI Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-23 14:41 ` Eric Auger
2016-05-23 14:41 ` Eric Auger
2016-05-24 2:23 ` Sinan Kaya
2016-05-24 2:23 ` Sinan Kaya
2016-05-23 15:21 ` Eric Auger
2016-05-23 15:21 ` Eric Auger
2016-05-24 2:25 ` Sinan Kaya
2016-05-24 2:25 ` Sinan Kaya
2016-05-16 2:13 ` [PATCH V5 6/6] vfio, platform: make reset driver a requirement by default Sinan Kaya
2016-05-16 2:13 ` Sinan Kaya
2016-05-23 15:20 ` Eric Auger
2016-05-23 15:20 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5743B923.4090307@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=alex.williamson@redhat.com \
--cc=b.reynal@virtualopensystems.com \
--cc=cov@codeaurora.org \
--cc=eric.auger@linaro.org \
--cc=jcm@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.