From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH 0/5] SPL: DFU Support in SPL
Date: Fri, 27 May 2016 15:42:15 +0200 [thread overview]
Message-ID: <57484EB7.3090701@denx.de> (raw)
In-Reply-To: <1464356373-8375-1-git-send-email-ravibabu@ti.com>
On 05/27/2016 03:39 PM, Ravi Babu wrote:
> Traditionally the DFU support is available only
> as part 2nd stage boot loader(u-boot) and DFU
> is not supported in SPL.
>
> The SPL-DFU feature is useful for boards which has
> only USB inteface and do not have external interface
> like ethernet or MMC/SD to boot the board.
>
> This patch adds DFU support in SPL to flash binary
> images to factory or bare-metal boards to memory
> devices like SPI, eMMC, MMC/SD card using
> USB interface.
> As a reference, refer to application note [3] on SPL-DFU
> support based on 2014.07 u-boot.
>
> Note: I could not find better option to isolate dfu source
> to include/exclude in Makefile when SPL-DFU feature
> enabled/disabled, please suggest any better option.
>
> Tested on dra7xx SoCs family.
> [1] is EVM console output with SPL-DFU/SPI enabled.
> [2] is ubuntu host console output.
>
> references:
> [1] http://pastebin.ubuntu.com/16730701/
> [2] http://pastebin.ubuntu.com/16730765/
> [3] http://www.ti.com/lit/an/sprac33/sprac33.pdf
>
> Ravi Babu (5):
> spl: dfu: add dfu support in SPL
> spl: dfu: fs: adding ext4/fat filesystem support for SPL-DFU
> spl: dfu: adding dfu support functions for SPL-DFU
> dfu: spl: add generic spl-dfu function in common-spl
> dra7x: spl: dfu: adding SPL-DFU support for dra7x platform
>
> Kconfig | 40 +++++++++++++++++++++++++++++++++++++
> board/ti/dra7xx/evm.c | 20 +++++++++++++++++++
> cmd/Makefile | 20 ++++++++++++++++++-
> common/Makefile | 32 ++++++++++++++++++++---------
> common/command.c | 2 +-
> common/spl/spl.c | 11 ++++++++++
> drivers/dfu/dfu.c | 28 ++++++++++++++++++++++++++
> drivers/dfu/dfu_mmc.c | 28 ++++++++++++++++++++++++++
> drivers/mmc/Makefile | 3 +--
> drivers/mmc/mmc_private.h | 2 +-
> fs/Makefile | 12 ++++++++++-
> include/configs/dra7xx_evm.h | 3 +--
> include/configs/ti_omap5_common.h | 2 --
> include/dfu.h | 8 ++++++++
> include/spl.h | 1 +
> scripts/Makefile.spl | 13 ++++++++++++
> 16 files changed, 206 insertions(+), 19 deletions(-)
>
+CC Lukasz , this is his turf
--
Best regards,
Marek Vasut
prev parent reply other threads:[~2016-05-27 13:42 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-27 13:39 [U-Boot] [RFC PATCH 0/5] SPL: DFU Support in SPL Ravi Babu
2016-05-27 13:39 ` [U-Boot] [RFC PATCH 1/5] spl: dfu: add dfu support " Ravi Babu
2016-05-30 11:54 ` Lukasz Majewski
2016-05-30 13:43 ` B, Ravi
2016-05-30 14:59 ` Lukasz Majewski
2016-05-31 6:39 ` B, Ravi
2016-05-31 8:39 ` Lukasz Majewski
2016-05-31 9:04 ` B, Ravi
2016-05-31 9:55 ` Lukasz Majewski
2016-05-31 10:34 ` B, Ravi
2016-05-31 12:47 ` Lukasz Majewski
2016-05-31 13:31 ` B, Ravi
2016-05-31 15:13 ` Lukasz Majewski
2016-06-02 12:39 ` B, Ravi
2016-06-02 14:14 ` Lukasz Majewski
2016-06-02 14:22 ` B, Ravi
2016-06-03 9:27 ` Lukasz Majewski
2016-06-03 11:35 ` B, Ravi
2016-06-03 11:45 ` Lukasz Majewski
2016-05-27 13:39 ` [U-Boot] [RFC PATCH 2/5] spl: dfu: fs: adding ext4/fat filesystem support for SPL-DFU Ravi Babu
2016-05-30 11:59 ` Lukasz Majewski
2016-05-30 12:52 ` B, Ravi
2016-05-30 13:20 ` Lukasz Majewski
2016-05-30 13:52 ` B, Ravi
2016-05-27 13:39 ` [U-Boot] [RFC PATCH 3/5] spl: dfu: adding dfu support functions " Ravi Babu
2016-05-30 5:27 ` Heiko Schocher
2016-05-30 12:04 ` Lukasz Majewski
2016-05-30 12:49 ` B, Ravi
2016-05-27 13:39 ` [U-Boot] [RFC PATCH 4/5] dfu: spl: add generic spl-dfu function in common-spl Ravi Babu
2016-05-30 12:07 ` Lukasz Majewski
2016-05-27 13:39 ` [U-Boot] [RFC PATCH 5/5] dra7x: spl: dfu: adding SPL-DFU support for dra7x platform Ravi Babu
2016-05-30 12:19 ` Lukasz Majewski
2016-05-27 13:42 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57484EB7.3090701@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.