ath9k_htc firmware

ath9k_htc firmware

[bruce m beach]

Hello All

 I am still working on cleaning up ath9k_htc firmware build tree for about 6
months now ( and looks like I'll be doing this for all eternity**2 ) and am
not clear myself what I'm looking for right now.

I'm looking for some kind of simple request in the ath9k_htc driver, through
the usb ep0, like a memory read on the card, where a urb is sent with
the resulting chain of events. The simpler the better. The simplest.

Bruce

Re: ath9k_htc firmware

[Oleksij Rempel]

[-- Attachment #1.1: Type: text/plain, Size: 1977 bytes --]

Am 03.06.2016 um 19:26 schrieb bruce m beach:
> Hello All
> 
>  I am still working on cleaning up ath9k_htc firmware build tree for about 6
> months now ( and looks like I'll be doing this for all eternity**2 ) and am
> not clear myself what I'm looking for right now.
> 
> I'm looking for some kind of simple request in the ath9k_htc driver, through
> the usb ep0, like a memory read on the card, where a urb is sent with
> the resulting chain of events. The simpler the better. The simplest.

For EP0 on drivers site:
static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
{
        int transfer, err;
        const void *data = hif_dev->fw_data;
        size_t len = hif_dev->fw_size;
        u32 addr = AR9271_FIRMWARE;
        u8 *buf = kzalloc(4096, GFP_KERNEL);
        u32 firm_offset;

        if (!buf)
                return -ENOMEM;

        while (len) {
                transfer = min_t(size_t, len, 4096);
                memcpy(buf, data, transfer);

                err = usb_control_msg(hif_dev->udev,
                                      usb_sndctrlpipe(hif_dev->udev, 0),
                                      FIRMWARE_DOWNLOAD, 0x40 | USB_DIR_OUT,
                                      addr >> 8, 0, buf, transfer, HZ);

=============================================================================



On side of pre installed firmware, the code looks like this:
open-ath9k-htc-firmware/sboot/magpie_1_1/sboot/hif/usb/src/usb_api.c
LOCAL void VendorCommand(void)
{
#define cUSB_REQ_DOWNLOAD          0x30
#define cUSB_REQ_DOWNLOAD_COMP     0x31
#define cUSB_REQ_BOOT              0x32
#define cUSB_REQ_RESERVED_1        0x33
#define cUSB_REQ_RESERVED_2        0x34

#define cUSB_REQ_FLASH_READ        0x35
#define cUSB_REQ_FLASH_READ_COMP   0x36

//#define ZM_FIRMWARE_ADDR           0x200000

    void (*funcPtr)(void);
    uint16_t *text_addr = 0;
    uint32_t ep0_data = 0x0;
...


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]

[ath9k-devel] Fwd: Re: ath9k_htc firmware

[Oleksij Rempel]

Am 03.06.2016 um 19:26 schrieb bruce m beach:
> Hello All
> 
>  I am still working on cleaning up ath9k_htc firmware build tree for about 6
> months now ( and looks like I'll be doing this for all eternity**2 ) and am
> not clear myself what I'm looking for right now.
> 
> I'm looking for some kind of simple request in the ath9k_htc driver, through
> the usb ep0, like a memory read on the card, where a urb is sent with
> the resulting chain of events. The simpler the better. The simplest.

For EP0 on drivers site:
static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
{
        int transfer, err;
        const void *data = hif_dev->fw_data;
        size_t len = hif_dev->fw_size;
        u32 addr = AR9271_FIRMWARE;
        u8 *buf = kzalloc(4096, GFP_KERNEL);
        u32 firm_offset;

        if (!buf)
                return -ENOMEM;

        while (len) {
                transfer = min_t(size_t, len, 4096);
                memcpy(buf, data, transfer);

                err = usb_control_msg(hif_dev->udev,
                                      usb_sndctrlpipe(hif_dev->udev, 0),
                                      FIRMWARE_DOWNLOAD, 0x40 | USB_DIR_OUT,
                                      addr >> 8, 0, buf, transfer, HZ);

=============================================================================



On side of pre installed firmware, the code looks like this:
open-ath9k-htc-firmware/sboot/magpie_1_1/sboot/hif/usb/src/usb_api.c
LOCAL void VendorCommand(void)
{
#define cUSB_REQ_DOWNLOAD          0x30
#define cUSB_REQ_DOWNLOAD_COMP     0x31
#define cUSB_REQ_BOOT              0x32
#define cUSB_REQ_RESERVED_1        0x33
#define cUSB_REQ_RESERVED_2        0x34

#define cUSB_REQ_FLASH_READ        0x35
#define cUSB_REQ_FLASH_READ_COMP   0x36

//#define ZM_FIRMWARE_ADDR           0x200000

    void (*funcPtr)(void);
    uint16_t *text_addr = 0;
    uint32_t ep0_data = 0x0;
...





-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 213 bytes
Desc: OpenPGP digital signature
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20160604/2a073a8d/attachment.pgp 

Fwd: Re: ath9k_htc firmware

[Oleksij Rempel]

[-- Attachment #1.1: Type: text/plain, Size: 1989 bytes --]



Am 03.06.2016 um 19:26 schrieb bruce m beach:
> Hello All
> 
>  I am still working on cleaning up ath9k_htc firmware build tree for about 6
> months now ( and looks like I'll be doing this for all eternity**2 ) and am
> not clear myself what I'm looking for right now.
> 
> I'm looking for some kind of simple request in the ath9k_htc driver, through
> the usb ep0, like a memory read on the card, where a urb is sent with
> the resulting chain of events. The simpler the better. The simplest.

For EP0 on drivers site:
static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
{
        int transfer, err;
        const void *data = hif_dev->fw_data;
        size_t len = hif_dev->fw_size;
        u32 addr = AR9271_FIRMWARE;
        u8 *buf = kzalloc(4096, GFP_KERNEL);
        u32 firm_offset;

        if (!buf)
                return -ENOMEM;

        while (len) {
                transfer = min_t(size_t, len, 4096);
                memcpy(buf, data, transfer);

                err = usb_control_msg(hif_dev->udev,
                                      usb_sndctrlpipe(hif_dev->udev, 0),
                                      FIRMWARE_DOWNLOAD, 0x40 | USB_DIR_OUT,
                                      addr >> 8, 0, buf, transfer, HZ);

=============================================================================



On side of pre installed firmware, the code looks like this:
open-ath9k-htc-firmware/sboot/magpie_1_1/sboot/hif/usb/src/usb_api.c
LOCAL void VendorCommand(void)
{
#define cUSB_REQ_DOWNLOAD          0x30
#define cUSB_REQ_DOWNLOAD_COMP     0x31
#define cUSB_REQ_BOOT              0x32
#define cUSB_REQ_RESERVED_1        0x33
#define cUSB_REQ_RESERVED_2        0x34

#define cUSB_REQ_FLASH_READ        0x35
#define cUSB_REQ_FLASH_READ_COMP   0x36

//#define ZM_FIRMWARE_ADDR           0x200000

    void (*funcPtr)(void);
    uint16_t *text_addr = 0;
    uint32_t ep0_data = 0x0;
...






[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]

[ath9k-devel] ath9k_htc firmware

[bruce m beach]

>> I'm looking for some kind of simple request in the ath9k_htc driver, through
>> the usb ep0, like a memory read on the card, where a urb is sent with
>> the resulting chain of events. The simpler the better. The simplest.

> For EP0 on drivers site:
> static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
> {
> int transfer, err;
> const void *data = hif_dev->fw_data;
> size_t len = hif_dev->fw_size;
> u32 addr = AR9271_FIRMWARE;
> u8 *buf = kzalloc(4096, GFP_KERNEL);
> u32 firm_offset;
> ...

  What about the code for setting and resetting leds ???

Bruce

ath9k_htc firmware

[bruce m beach]

>> I'm looking for some kind of simple request in the ath9k_htc driver, through
>> the usb ep0, like a memory read on the card, where a urb is sent with
>> the resulting chain of events. The simpler the better. The simplest.

> For EP0 on drivers site:
> static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
> {
> int transfer, err;
> const void *data = hif_dev->fw_data;
> size_t len = hif_dev->fw_size;
> u32 addr = AR9271_FIRMWARE;
> u8 *buf = kzalloc(4096, GFP_KERNEL);
> u32 firm_offset;
> ...

  What about the code for setting and resetting leds ???

Bruce

[ath9k-devel] ath9k_htc firmware

[Oleksij Rempel]

Am 04.06.2016 um 21:44 schrieb bruce m beach:
>>> I'm looking for some kind of simple request in the ath9k_htc driver, through
>>> the usb ep0, like a memory read on the card, where a urb is sent with
>>> the resulting chain of events. The simpler the better. The simplest.
> 
>> For EP0 on drivers site:
>> static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
>> {
>> int transfer, err;
>> const void *data = hif_dev->fw_data;
>> size_t len = hif_dev->fw_size;
>> u32 addr = AR9271_FIRMWARE;
>> u8 *buf = kzalloc(4096, GFP_KERNEL);
>> u32 firm_offset;
>> ...
> 
>   What about the code for setting and resetting leds ???
> 
> Bruce
> 


It is EP3/EP4 and it is not working without firmware.
Here is one example how you can add new command to firmware:
https://github.com/olerem/open-ath9k-htc-firmware/commit/c73c159303e30a28e2d3dc05ba0d2d15504e5fad


And for kernel driver:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8badb50cfab6d433622dbfd5a90b6adf27333107

Re: ath9k_htc firmware

[Oleksij Rempel]

Am 04.06.2016 um 21:44 schrieb bruce m beach:
>>> I'm looking for some kind of simple request in the ath9k_htc driver, through
>>> the usb ep0, like a memory read on the card, where a urb is sent with
>>> the resulting chain of events. The simpler the better. The simplest.
> 
>> For EP0 on drivers site:
>> static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
>> {
>> int transfer, err;
>> const void *data = hif_dev->fw_data;
>> size_t len = hif_dev->fw_size;
>> u32 addr = AR9271_FIRMWARE;
>> u8 *buf = kzalloc(4096, GFP_KERNEL);
>> u32 firm_offset;
>> ...
> 
>   What about the code for setting and resetting leds ???
> 
> Bruce
> 


It is EP3/EP4 and it is not working without firmware.
Here is one example how you can add new command to firmware:
https://github.com/olerem/open-ath9k-htc-firmware/commit/c73c159303e30a28e2d3dc05ba0d2d15504e5fad


And for kernel driver:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8badb50cfab6d433622dbfd5a90b6adf27333107

[ath9k-devel] ath9k_htc firmware

[Oleksij Rempel]

Am 04.06.2016 um 21:44 schrieb bruce m beach:
>>> I'm looking for some kind of simple request in the ath9k_htc driver, through
>>> the usb ep0, like a memory read on the card, where a urb is sent with
>>> the resulting chain of events. The simpler the better. The simplest.
> 
>> For EP0 on drivers site:
>> static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
>> {
>> int transfer, err;
>> const void *data = hif_dev->fw_data;
>> size_t len = hif_dev->fw_size;
>> u32 addr = AR9271_FIRMWARE;
>> u8 *buf = kzalloc(4096, GFP_KERNEL);
>> u32 firm_offset;
>> ...
> 
>   What about the code for setting and resetting leds ???
> 
> Bruce

It is EP3/EP4 and it is not working without firmware.
Here is one example how you can add new command to firmware:
https://github.com/olerem/open-ath9k-htc-firmware/commit/c73c159303e30a28e2d3dc05ba0d2d15504e5fad


And for kernel driver:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8badb50cfab6d433622dbfd5a90b6adf27333107


PS: Grr... today i send message from wrong email. Sorry for the spam



-- 
Regards,
Oleksij

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 213 bytes
Desc: OpenPGP digital signature
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20160604/7f9800c4/attachment.pgp 

Re: ath9k_htc firmware

[Oleksij Rempel]

[-- Attachment #1.1: Type: text/plain, Size: 1137 bytes --]

Am 04.06.2016 um 21:44 schrieb bruce m beach:
>>> I'm looking for some kind of simple request in the ath9k_htc driver, through
>>> the usb ep0, like a memory read on the card, where a urb is sent with
>>> the resulting chain of events. The simpler the better. The simplest.
> 
>> For EP0 on drivers site:
>> static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
>> {
>> int transfer, err;
>> const void *data = hif_dev->fw_data;
>> size_t len = hif_dev->fw_size;
>> u32 addr = AR9271_FIRMWARE;
>> u8 *buf = kzalloc(4096, GFP_KERNEL);
>> u32 firm_offset;
>> ...
> 
>   What about the code for setting and resetting leds ???
> 
> Bruce

It is EP3/EP4 and it is not working without firmware.
Here is one example how you can add new command to firmware:
https://github.com/olerem/open-ath9k-htc-firmware/commit/c73c159303e30a28e2d3dc05ba0d2d15504e5fad


And for kernel driver:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8badb50cfab6d433622dbfd5a90b6adf27333107


PS: Grr... today i send message from wrong email. Sorry for the spam



-- 
Regards,
Oleksij


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]

ath9k_htc firmware

[bruce m beach]

> Here is one example how you can add new command to firmware:
> https://github.com/olerem/open-ath9k-htc-firmware/commit
>> /c73c159303e30a28e2d3dc05ba0d2d15504e5fad

Thanks for the example. Seems clear as to how it works. Currently I'm looking
at anything to do with these tables, which I'll be at it for the next month or
so. Going back to the original question I see that the reason that I didn't
find very much in terms of traffic on EP0 is that there isn't very
much traffic on
 EP0 so that answers that.

Currently the real problem that I'm having is that I can't open a USBLIB FD out
in userland while the kernel driver is attached. I can talk to the stick
without the driver but while the driver is attached it blocks the access and I
would very much like to disable that block.

Bruce