All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keerthy <a0393675@ti.com>
To: Lee Jones <lee.jones@linaro.org>, Keerthy <j-keerthy@ti.com>
Cc: broonie@kernel.org, tony@atomide.com, robh+dt@kernel.org,
	mark.rutland@arm.com, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers
Date: Wed, 8 Jun 2016 21:41:40 +0530	[thread overview]
Message-ID: <575843BC.3090004@ti.com> (raw)
In-Reply-To: <20160608155136.GC14888@dell>



On Wednesday 08 June 2016 09:21 PM, Lee Jones wrote:
> On Fri, 13 May 2016, Keerthy wrote:
>
>> Add information for the mfd and regulator drivers.
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v3:
>>
>>    * Changed the example node lable to pmic from lp8733.
>>
>>   Documentation/devicetree/bindings/mfd/lp873x.txt | 55 ++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
>> new file mode 100644
>> index 0000000..8f3ef0d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
>> @@ -0,0 +1,55 @@
>> +TI LP3943 MFD driver
>> +
>> +Required properties:
>> +  - compatible: "ti,lp8732", "ti,lp8733"
>> +  - reg: I2C slave address.
>> +
>> +For the lp873x regulator properties please refer to:
>> +../bindings/regulator/lp873x.txt
>
> What else does the LP3943 consist of apart from regulators?

A bunch of GPOs in addition to regulators.

>
>> +Example:
>> +
>> +pmic: lp8733@60 {
>> +	compatible = "ti,lp8733";
>> +	reg = <0x60>;
>> +
>> +	regulators {
>> +		lp8733_buck0: buck0 {
>> +			regulator-name = "lp8733-buck0";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1400000>;
>> +			regulator-min-microamp = <1500000>;
>> +			regulator-max-microamp = <4000000>;
>> +			regulator-ramp-delay = <10000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +		};
>> +
>> +		lp8733_buck1: buck1 {
>> +			regulator-name = "lp8733-buck1";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1400000>;
>> +			regulator-min-microamp = <1500000>;
>> +			regulator-max-microamp = <4000000>;
>> +			regulator-ramp-delay = <10000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		lp8733_ldo0: ldo0 {
>> +			regulator-name = "lp8733-ldo0";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <3000000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		lp8733_ldo1: ldo1 {
>> +			regulator-name = "lp8733-ldo1";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <3000000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +		};
>> +	};
>> +};
>

WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <a0393675@ti.com>
To: Lee Jones <lee.jones@linaro.org>, Keerthy <j-keerthy@ti.com>
Cc: <broonie@kernel.org>, <tony@atomide.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <linux-omap@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers
Date: Wed, 8 Jun 2016 21:41:40 +0530	[thread overview]
Message-ID: <575843BC.3090004@ti.com> (raw)
In-Reply-To: <20160608155136.GC14888@dell>



On Wednesday 08 June 2016 09:21 PM, Lee Jones wrote:
> On Fri, 13 May 2016, Keerthy wrote:
>
>> Add information for the mfd and regulator drivers.
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v3:
>>
>>    * Changed the example node lable to pmic from lp8733.
>>
>>   Documentation/devicetree/bindings/mfd/lp873x.txt | 55 ++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
>> new file mode 100644
>> index 0000000..8f3ef0d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
>> @@ -0,0 +1,55 @@
>> +TI LP3943 MFD driver
>> +
>> +Required properties:
>> +  - compatible: "ti,lp8732", "ti,lp8733"
>> +  - reg: I2C slave address.
>> +
>> +For the lp873x regulator properties please refer to:
>> +../bindings/regulator/lp873x.txt
>
> What else does the LP3943 consist of apart from regulators?

A bunch of GPOs in addition to regulators.

>
>> +Example:
>> +
>> +pmic: lp8733@60 {
>> +	compatible = "ti,lp8733";
>> +	reg = <0x60>;
>> +
>> +	regulators {
>> +		lp8733_buck0: buck0 {
>> +			regulator-name = "lp8733-buck0";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1400000>;
>> +			regulator-min-microamp = <1500000>;
>> +			regulator-max-microamp = <4000000>;
>> +			regulator-ramp-delay = <10000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +		};
>> +
>> +		lp8733_buck1: buck1 {
>> +			regulator-name = "lp8733-buck1";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1400000>;
>> +			regulator-min-microamp = <1500000>;
>> +			regulator-max-microamp = <4000000>;
>> +			regulator-ramp-delay = <10000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		lp8733_ldo0: ldo0 {
>> +			regulator-name = "lp8733-ldo0";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <3000000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		lp8733_ldo1: ldo1 {
>> +			regulator-name = "lp8733-ldo1";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <3000000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +		};
>> +	};
>> +};
>

  reply	other threads:[~2016-06-08 16:11 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-13  3:48 [PATCH v3 0/2] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-05-13  3:48 ` Keerthy
2016-05-13  3:48 ` [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers Keerthy
2016-05-13  3:48   ` Keerthy
2016-06-08 15:51   ` Lee Jones
2016-06-08 16:11     ` Keerthy [this message]
2016-06-08 16:11       ` Keerthy
2016-05-13  3:48 ` [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-05-13  3:48   ` Keerthy
     [not found]   ` <1463111290-12377-3-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2016-05-17 10:31     ` Keerthy
2016-05-17 10:31       ` Keerthy
     [not found]       ` <573AF306.5040700-l0cyMroinI0@public.gmane.org>
2016-05-17 10:49         ` Lee Jones
2016-05-17 10:49           ` Lee Jones
2016-06-06  3:36           ` Keerthy
2016-06-06  3:36             ` Keerthy
2016-06-06  8:55             ` Lee Jones
2016-06-06  9:33               ` Keerthy
2016-06-06  9:33                 ` Keerthy
2016-06-08 16:11     ` Lee Jones
2016-06-08 16:11       ` Lee Jones
2016-06-08 16:17       ` Keerthy
2016-06-08 16:17         ` Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=575843BC.3090004@ti.com \
    --to=a0393675@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.