From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: Stephan Linz <linz@li-pro.net>
Cc: linux-leds@vger.kernel.org, linux-ide@vger.kernel.org,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Russell King" <linux@armlinux.org.uk>,
"Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@free-electrons.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Sekhar Nori" <nsekhar@ti.com>,
"Kevin Hilman" <khilman@kernel.org>,
"Daniel Mack" <daniel@zonque.org>,
"Haojian Zhuang" <haojian.zhuang@gmail.com>,
"Robert Jarzmik" <robert.jarzmik@free.fr>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 4/7] arm: use the new LED disk activity trigger
Date: Mon, 13 Jun 2016 09:42:12 +0200 [thread overview]
Message-ID: <575E63D4.6030507@samsung.com> (raw)
In-Reply-To: <20160610060021.12382-4-linz@li-pro.net>
Hi all,
For consistency reasons this patch should be merged through LED tree,
but I need an ack from relevant maintainer. Benoit, Tony?
Thanks,
Jacek Anaszewski
On 06/10/2016 07:59 AM, Stephan Linz wrote:
> - dts: rename 'ide-disk' to 'disk-activity'
> - platform: rename 'ide-disk' to 'disk-activity'
> - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> ---
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +-
> arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +-
> arch/arm/boot/dts/kirkwood-topkick.dts | 2 +-
> arch/arm/configs/collie_defconfig | 2 +-
> arch/arm/configs/ixp4xx_defconfig | 2 +-
> arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
> arch/arm/mach-omap1/board-osk.c | 2 +-
> arch/arm/mach-pxa/spitz.c | 2 +-
> 8 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 81d6c30..c4d04c5 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -86,7 +86,7 @@
> led@3 {
> label = "beagle-x15:usr3";
> gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> default-state = "off";
> };
> };
> diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> index 1f2ca60..2c661ad 100644
> --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
> +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> @@ -26,7 +26,7 @@
> blue-sata {
> label = "ns2:blue:sata";
> gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> };
> };
> };
> diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
> index f5c8c0d..1e9a721 100644
> --- a/arch/arm/boot/dts/kirkwood-topkick.dts
> +++ b/arch/arm/boot/dts/kirkwood-topkick.dts
> @@ -129,7 +129,7 @@
> disk {
> label = "topkick:yellow:disk";
> gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "ide-disk";
> + linux,default-trigger = "disk-activity";
> };
> system2 {
> label = "topkick:red:system";
> diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
> index 6c56ad0..52dbad5 100644
> --- a/arch/arm/configs/collie_defconfig
> +++ b/arch/arm/configs/collie_defconfig
> @@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
> CONFIG_LEDS_LOCOMO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
> # CONFIG_DNOTIFY is not set
> CONFIG_VFAT_FS=y
> CONFIG_TMPFS=y
> diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
> index 24636cf..cf4918a 100644
> --- a/arch/arm/configs/ixp4xx_defconfig
> +++ b/arch/arm/configs/ixp4xx_defconfig
> @@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
> CONFIG_LEDS_GPIO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_ISL1208=y
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index 68cc099..ab47b8e 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
> { .name = "DS2", .active_low = 1,
> .default_trigger = "mmc0", },
> { .name = "DS1", .active_low = 1,
> - .default_trigger = "ide-disk", },
> + .default_trigger = "disk-activity", },
> };
>
> static const struct gpio_led_platform_data evm_led_data = {
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 209aecb..4dfb995 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
> * Also, D9 requires non-battery power.
> */
> { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
> - .default_trigger = "ide-disk", },
> + .default_trigger = "disk-activity", },
> { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
> { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
> .default_trigger = "heartbeat", },
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index bd7cd8b..1080580 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
> },
> {
> .name = "spitz:green:hddactivity",
> - .default_trigger = "ide-disk",
> + .default_trigger = "disk-activity",
> .gpio = SPITZ_GPIO_LED_GREEN,
> },
> };
>
next prev parent reply other threads:[~2016-06-13 7:42 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 5:59 [PATCH v4 1/7] leds: convert IDE trigger to common disk trigger Stephan Linz
2016-06-10 5:59 ` [PATCH v4 2/7] leds: documentation: 'ide-disk' to 'disk-activity' Stephan Linz
2016-06-10 18:07 ` Rob Herring
[not found] ` <20160610060021.12382-1-linz-LlUBiLVY8XKsTnJN9+BGXg@public.gmane.org>
2016-06-10 5:59 ` [PATCH v4 3/7] powerpc: use the new LED disk activity trigger Stephan Linz
2016-06-10 5:59 ` Stephan Linz
2016-06-13 7:46 ` Jacek Anaszewski
2016-06-10 5:59 ` [PATCH v4 4/7] arm: " Stephan Linz
2016-06-13 7:42 ` Jacek Anaszewski [this message]
2016-06-13 7:49 ` Tony Lindgren
2016-06-13 8:12 ` Sekhar Nori
2016-06-13 8:12 ` Sekhar Nori
2016-06-16 7:16 ` Robert Jarzmik
2016-06-10 6:00 ` [PATCH v4 5/7] mips: " Stephan Linz
2016-06-13 7:53 ` Jacek Anaszewski
2016-06-10 6:00 ` [PATCH v4 6/7] parisc: " Stephan Linz
2016-06-13 7:56 ` Jacek Anaszewski
2016-06-13 13:24 ` Helge Deller
2016-06-10 6:00 ` [PATCH v4 7/7] unicore32: " Stephan Linz
2016-06-13 7:57 ` Jacek Anaszewski
2016-06-14 2:11 ` Xuetao Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575E63D4.6030507@samsung.com \
--to=j.anaszewski@samsung.com \
--cc=andrew@lunn.ch \
--cc=bcousson@baylibre.com \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregory.clement@free-electrons.com \
--cc=haojian.zhuang@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=khilman@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linz@li-pro.net \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.